diff options
Diffstat (limited to 'include/linux/platform_data')
21 files changed, 744 insertions, 35 deletions
diff --git a/include/linux/platform_data/ad7266.h b/include/linux/platform_data/ad7266.h new file mode 100644 index 000000000000..eabfdcb26992 --- /dev/null +++ b/include/linux/platform_data/ad7266.h @@ -0,0 +1,54 @@ +/* + * AD7266/65 SPI ADC driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __IIO_ADC_AD7266_H__ +#define __IIO_ADC_AD7266_H__ + +/** + * enum ad7266_range - AD7266 reference voltage range + * @AD7266_RANGE_VREF: Device is configured for input range 0V - VREF + * (RANGE pin set to low) + * @AD7266_RANGE_2VREF: Device is configured for input range 0V - 2VREF + * (RANGE pin set to high) + */ +enum ad7266_range { + AD7266_RANGE_VREF, + AD7266_RANGE_2VREF, +}; + +/** + * enum ad7266_mode - AD7266 sample mode + * @AD7266_MODE_DIFF: Device is configured for full differential mode + * (SGL/DIFF pin set to low, AD0 pin set to low) + * @AD7266_MODE_PSEUDO_DIFF: Device is configured for pseudo differential mode + * (SGL/DIFF pin set to low, AD0 pin set to high) + * @AD7266_MODE_SINGLE_ENDED: Device is configured for single-ended mode + * (SGL/DIFF pin set to high) + */ +enum ad7266_mode { + AD7266_MODE_DIFF, + AD7266_MODE_PSEUDO_DIFF, + AD7266_MODE_SINGLE_ENDED, +}; + +/** + * struct ad7266_platform_data - Platform data for the AD7266 driver + * @range: Reference voltage range the device is configured for + * @mode: Sample mode the device is configured for + * @fixed_addr: Whether the address pins are hard-wired + * @addr_gpios: GPIOs used for controlling the address pins, only used if + * fixed_addr is set to false. + */ +struct ad7266_platform_data { + enum ad7266_range range; + enum ad7266_mode mode; + bool fixed_addr; + unsigned int addr_gpios[3]; +}; + +#endif diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h new file mode 100644 index 000000000000..e15745b4f3a5 --- /dev/null +++ b/include/linux/platform_data/at91_adc.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2011 Free Electrons + * + * Licensed under the GPLv2 or later. + */ + +#ifndef _AT91_ADC_H_ +#define _AT91_ADC_H_ + +/** + * struct at91_adc_reg_desc - Various informations relative to registers + * @channel_base: Base offset for the channel data registers + * @drdy_mask: Mask of the DRDY field in the relevant registers + (Interruptions registers mostly) + * @status_register: Offset of the Interrupt Status Register + * @trigger_register: Offset of the Trigger setup register + */ +struct at91_adc_reg_desc { + u8 channel_base; + u32 drdy_mask; + u8 status_register; + u8 trigger_register; +}; + +/** + * struct at91_adc_trigger - description of triggers + * @name: name of the trigger advertised to the user + * @value: value to set in the ADC's trigger setup register + to enable the trigger + * @is_external: Does the trigger rely on an external pin? + */ +struct at91_adc_trigger { + const char *name; + u8 value; + bool is_external; +}; + +/** + * struct at91_adc_data - platform data for ADC driver + * @channels_used: channels in use on the board as a bitmask + * @num_channels: global number of channels available on the board + * @registers: Registers definition on the board + * @startup_time: startup time of the ADC in microseconds + * @trigger_list: Triggers available in the ADC + * @trigger_number: Number of triggers available in the ADC + * @use_external_triggers: does the board has external triggers availables + * @vref: Reference voltage for the ADC in millivolts + */ +struct at91_adc_data { + unsigned long channels_used; + u8 num_channels; + struct at91_adc_reg_desc *registers; + u8 startup_time; + struct at91_adc_trigger *trigger_list; + u8 trigger_number; + bool use_external_triggers; + u16 vref; +}; + +extern void __init at91_add_device_adc(struct at91_adc_data *data); +#endif diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h new file mode 100644 index 000000000000..e7a1949bad26 --- /dev/null +++ b/include/linux/platform_data/atmel-aes.h @@ -0,0 +1,22 @@ +#ifndef __LINUX_ATMEL_AES_H +#define __LINUX_ATMEL_AES_H + +#include <mach/at_hdmac.h> + +/** + * struct aes_dma_data - DMA data for AES + */ +struct aes_dma_data { + struct at_dma_slave txdata; + struct at_dma_slave rxdata; +}; + +/** + * struct aes_platform_data - board-specific AES configuration + * @dma_slave: DMA slave interface to use in data transfers. + */ +struct aes_platform_data { + struct aes_dma_data *dma_slave; +}; + +#endif /* __LINUX_ATMEL_AES_H */ diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h new file mode 100644 index 000000000000..83fe9c283bb8 --- /dev/null +++ b/include/linux/platform_data/clk-integrator.h @@ -0,0 +1 @@ +void integrator_clk_init(bool is_cp); diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h new file mode 100644 index 000000000000..5713c87b2477 --- /dev/null +++ b/include/linux/platform_data/clk-nomadik.h @@ -0,0 +1,2 @@ +/* Minimal platform data header */ +void nomadik_clk_init(void); diff --git a/include/linux/platform_data/clk-u300.h b/include/linux/platform_data/clk-u300.h new file mode 100644 index 000000000000..8429e73911a1 --- /dev/null +++ b/include/linux/platform_data/clk-u300.h @@ -0,0 +1 @@ +void __init u300_clk_init(void __iomem *base); diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h new file mode 100644 index 000000000000..5c15a738e116 --- /dev/null +++ b/include/linux/platform_data/ehci-sh.h @@ -0,0 +1,28 @@ +/* + * EHCI SuperH driver platform data + * + * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __USB_EHCI_SH_H +#define __USB_EHCI_SH_H + +struct ehci_sh_platdata { + void (*phy_init)(void); /* Phy init function */ +}; + +#endif /* __USB_EHCI_SH_H */ diff --git a/include/linux/platform_data/emif_plat.h b/include/linux/platform_data/emif_plat.h new file mode 100644 index 000000000000..03378ca84061 --- /dev/null +++ b/include/linux/platform_data/emif_plat.h @@ -0,0 +1,128 @@ +/* + * Definitions for TI EMIF device platform data + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * Aneesh V <aneesh@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __EMIF_PLAT_H +#define __EMIF_PLAT_H + +/* Low power modes - EMIF_PWR_MGMT_CTRL */ +#define EMIF_LP_MODE_DISABLE 0 +#define EMIF_LP_MODE_CLOCK_STOP 1 +#define EMIF_LP_MODE_SELF_REFRESH 2 +#define EMIF_LP_MODE_PWR_DN 4 + +/* Hardware capabilities */ +#define EMIF_HW_CAPS_LL_INTERFACE 0x00000001 + +/* + * EMIF IP Revisions + * EMIF4D - Used in OMAP4 + * EMIF4D5 - Used in OMAP5 + */ +#define EMIF_4D 1 +#define EMIF_4D5 2 + +/* + * PHY types + * ATTILAPHY - Used in OMAP4 + * INTELLIPHY - Used in OMAP5 + */ +#define EMIF_PHY_TYPE_ATTILAPHY 1 +#define EMIF_PHY_TYPE_INTELLIPHY 2 + +/* Custom config requests */ +#define EMIF_CUSTOM_CONFIG_LPMODE 0x00000001 +#define EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL 0x00000002 + +#ifndef __ASSEMBLY__ +/** + * struct ddr_device_info - All information about the DDR device except AC + * timing parameters + * @type: Device type (LPDDR2-S4, LPDDR2-S2 etc) + * @density: Device density + * @io_width: Bus width + * @cs1_used: Whether there is a DDR device attached to the second + * chip-select(CS1) of this EMIF instance + * @cal_resistors_per_cs: Whether there is one calibration resistor per + * chip-select or whether it's a single one for both + * @manufacturer: Manufacturer name string + */ +struct ddr_device_info { + u32 type; + u32 density; + u32 io_width; + u32 cs1_used; + u32 cal_resistors_per_cs; + char manufacturer[10]; +}; + +/** + * struct emif_custom_configs - Custom configuration parameters/policies + * passed from the platform layer + * @mask: Mask to indicate which configs are requested + * @lpmode: LPMODE to be used in PWR_MGMT_CTRL register + * @lpmode_timeout_performance: Timeout before LPMODE entry when higher + * performance is desired at the cost of power (typically + * at higher OPPs) + * @lpmode_timeout_power: Timeout before LPMODE entry when better power + * savings is desired and performance is not important + * (typically at lower loads indicated by lower OPPs) + * @lpmode_freq_threshold: The DDR frequency threshold to identify between + * the above two cases: + * timeout = (freq >= lpmode_freq_threshold) ? + * lpmode_timeout_performance : + * lpmode_timeout_power; + * @temp_alert_poll_interval_ms: LPDDR2 MR4 polling interval at nominal + * temperature(in milliseconds). When temperature is high + * polling is done 4 times as frequently. + */ +struct emif_custom_configs { + u32 mask; + u32 lpmode; + u32 lpmode_timeout_performance; + u32 lpmode_timeout_power; + u32 lpmode_freq_threshold; + u32 temp_alert_poll_interval_ms; +}; + +/** + * struct emif_platform_data - Platform data passed on EMIF platform + * device creation. Used by the driver. + * @hw_caps: Hw capabilities of the EMIF IP in the respective SoC + * @device_info: Device info structure containing information such + * as type, bus width, density etc + * @timings: Timings information from device datasheet passed + * as an array of 'struct lpddr2_timings'. Can be NULL + * if if default timings are ok + * @timings_arr_size: Size of the timings array. Depends on the number + * of different frequencies for which timings data + * is provided + * @min_tck: Minimum value of some timing parameters in terms + * of number of cycles. Can be NULL if default values + * are ok + * @custom_configs: Custom configurations requested by SoC or board + * code and the data for them. Can be NULL if default + * configurations done by the driver are ok. See + * documentation for 'struct emif_custom_configs' for + * more details + */ +struct emif_platform_data { + u32 hw_caps; + struct ddr_device_info *device_info; + const struct lpddr2_timings *timings; + u32 timings_arr_size; + const struct lpddr2_min_tck *min_tck; + struct emif_custom_configs *custom_configs; + u32 ip_rev; + u32 phy_type; +}; +#endif /* __ASSEMBLY__ */ + +#endif /* __LINUX_EMIF_H */ diff --git a/include/linux/platform_data/gpio-em.h b/include/linux/platform_data/gpio-em.h new file mode 100644 index 000000000000..573edfb046c4 --- /dev/null +++ b/include/linux/platform_data/gpio-em.h @@ -0,0 +1,10 @@ +#ifndef __GPIO_EM_H__ +#define __GPIO_EM_H__ + +struct gpio_em_config { + unsigned int gpio_base; + unsigned int irq_base; + unsigned int number_of_pins; +}; + +#endif /* __GPIO_EM_H__ */ diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h new file mode 100644 index 000000000000..c2303c3e4803 --- /dev/null +++ b/include/linux/platform_data/i2c-nomadik.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ +#ifndef __PDATA_I2C_NOMADIK_H +#define __PDATA_I2C_NOMADIK_H + +enum i2c_freq_mode { + I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ + I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ + I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ + I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ +}; + +/** + * struct nmk_i2c_controller - client specific controller configuration + * @clk_freq: clock frequency for the operation mode + * @slsu: Slave data setup time in ns. + * The needed setup time for three modes of operation + * are 250ns, 100ns and 10ns respectively thus leading + * to the values of 14, 6, 2 for a 48 MHz i2c clk + * @tft: Tx FIFO Threshold in bytes + * @rft: Rx FIFO Threshold in bytes + * @timeout Slave response timeout(ms) + * @sm: speed mode + */ +struct nmk_i2c_controller { + unsigned long clk_freq; + unsigned short slsu; + unsigned char tft; + unsigned char rft; + int timeout; + enum i2c_freq_mode sm; +}; + +#endif /* __PDATA_I2C_NOMADIK_H */ diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h new file mode 100644 index 000000000000..9abc0ca7259b --- /dev/null +++ b/include/linux/platform_data/ina2xx.h @@ -0,0 +1,19 @@ +/* + * Driver for Texas Instruments INA219, INA226 power monitor chips + * + * Copyright (C) 2012 Lothar Felten <l-felten@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/ina2xx file. + */ + +/** + * struct ina2xx_platform_data - ina2xx info + * @shunt_uohms shunt resistance in microohms + */ +struct ina2xx_platform_data { + long shunt_uohms; +}; diff --git a/include/linux/platform_data/leds-lm3556.h b/include/linux/platform_data/leds-lm3556.h new file mode 100644 index 000000000000..4b4e7d6b0527 --- /dev/null +++ b/include/linux/platform_data/leds-lm3556.h @@ -0,0 +1,50 @@ +/* + * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03) + * Copyright (C) 2012 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_LM3556_H +#define __LINUX_LM3556_H + +#define LM3556_NAME "leds-lm3556" + +enum lm3556_pin_polarity { + PIN_LOW_ACTIVE = 0, + PIN_HIGH_ACTIVE, +}; + +enum lm3556_pin_enable { + PIN_DISABLED = 0, + PIN_ENABLED, +}; + +enum lm3556_strobe_usuage { + STROBE_EDGE_DETECT = 0, + STROBE_LEVEL_DETECT, +}; + +enum lm3556_indic_mode { + INDIC_MODE_INTERNAL = 0, + INDIC_MODE_EXTERNAL, +}; + +struct lm3556_platform_data { + enum lm3556_pin_enable torch_pin_en; + enum lm3556_pin_polarity torch_pin_polarity; + + enum lm3556_strobe_usuage strobe_usuage; + enum lm3556_pin_enable strobe_pin_en; + enum lm3556_pin_polarity strobe_pin_polarity; + + enum lm3556_pin_enable tx_pin_en; + enum lm3556_pin_polarity tx_pin_polarity; + + enum lm3556_indic_mode indicator_mode; +}; + +#endif /* __LINUX_LM3556_H */ diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h new file mode 100644 index 000000000000..cc76f1f18f18 --- /dev/null +++ b/include/linux/platform_data/lp855x.h @@ -0,0 +1,125 @@ +/* + * LP855x Backlight Driver + * + * Copyright (C) 2011 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP855X_H +#define _LP855X_H + +#define BL_CTL_SHFT (0) +#define BRT_MODE_SHFT (1) +#define BRT_MODE_MASK (0x06) + +/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */ +#define ENABLE_BL (1) +#define DISABLE_BL (0) + +#define I2C_CONFIG(id) id ## _I2C_CONFIG +#define PWM_CONFIG(id) id ## _PWM_CONFIG + +/* DEVICE CONTROL register - LP8550 */ +#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT) +#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8550_I2C_ONLY << BRT_MODE_SHFT)) + +/* DEVICE CONTROL register - LP8551 */ +#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8552 */ +#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8553 */ +#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8556 */ +#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT) +#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT) +#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8556_I2C_ONLY << BRT_MODE_SHFT)) +#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT) + +enum lp855x_chip_id { + LP8550, + LP8551, + LP8552, + LP8553, + LP8556, +}; + +enum lp855x_brightness_ctrl_mode { + PWM_BASED = 1, + REGISTER_BASED, +}; + +enum lp8550_brighntess_source { + LP8550_PWM_ONLY, + LP8550_I2C_ONLY = 2, +}; + +enum lp8551_brighntess_source { + LP8551_PWM_ONLY = LP8550_PWM_ONLY, + LP8551_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8552_brighntess_source { + LP8552_PWM_ONLY = LP8550_PWM_ONLY, + LP8552_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8553_brighntess_source { + LP8553_PWM_ONLY = LP8550_PWM_ONLY, + LP8553_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8556_brightness_source { + LP8556_PWM_ONLY, + LP8556_COMBINED1, /* pwm + i2c before the shaper block */ + LP8556_I2C_ONLY, + LP8556_COMBINED2, /* pwm + i2c after the shaper block */ +}; + +struct lp855x_pwm_data { + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (int max_brightness); +}; + +struct lp855x_rom_data { + u8 addr; + u8 val; +}; + +/** + * struct lp855x_platform_data + * @name : Backlight driver name. If it is not defined, default name is set. + * @mode : brightness control by pwm or lp855x register + * @device_control : value of DEVICE CONTROL register + * @initial_brightness : initial value of backlight brightness + * @pwm_data : platform specific pwm generation functions. + Only valid when mode is PWM_BASED. + * @load_new_rom_data : + 0 : use default configuration data + 1 : update values of eeprom or eprom registers on loading driver + * @size_program : total size of lp855x_rom_data + * @rom_data : list of new eeprom/eprom registers + */ +struct lp855x_platform_data { + char *name; + enum lp855x_brightness_ctrl_mode mode; + u8 device_control; + int initial_brightness; + struct lp855x_pwm_data pwm_data; + u8 load_new_rom_data; + int size_program; + struct lp855x_rom_data *rom_data; +}; + +#endif diff --git a/include/linux/platform_data/lp8727.h b/include/linux/platform_data/lp8727.h new file mode 100644 index 000000000000..ea98c6133d32 --- /dev/null +++ b/include/linux/platform_data/lp8727.h @@ -0,0 +1,65 @@ +/* + * LP8727 Micro/Mini USB IC with integrated charger + * + * Copyright (C) 2011 Texas Instruments + * Copyright (C) 2011 National Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LP8727_H +#define _LP8727_H + +enum lp8727_eoc_level { + EOC_5P, + EOC_10P, + EOC_16P, + EOC_20P, + EOC_25P, + EOC_33P, + EOC_50P, +}; + +enum lp8727_ichg { + ICHG_90mA, + ICHG_100mA, + ICHG_400mA, + ICHG_450mA, + ICHG_500mA, + ICHG_600mA, + ICHG_700mA, + ICHG_800mA, + ICHG_900mA, + ICHG_1000mA, +}; + +/** + * struct lp8727_chg_param + * @eoc_level : end of charge level setting + * @ichg : charging current + */ +struct lp8727_chg_param { + enum lp8727_eoc_level eoc_level; + enum lp8727_ichg ichg; +}; + +/** + * struct lp8727_platform_data + * @get_batt_present : check battery status - exists or not + * @get_batt_level : get battery voltage (mV) + * @get_batt_capacity : get battery capacity (%) + * @get_batt_temp : get battery temperature + * @ac, @usb : charging parameters each charger type + */ +struct lp8727_platform_data { + u8 (*get_batt_present)(void); + u16 (*get_batt_level)(void); + u8 (*get_batt_capacity)(void); + u8 (*get_batt_temp)(void); + struct lp8727_chg_param ac; + struct lp8727_chg_param usb; +}; + +#endif diff --git a/include/linux/platform_data/mmp_audio.h b/include/linux/platform_data/mmp_audio.h new file mode 100644 index 000000000000..0f25d165abd6 --- /dev/null +++ b/include/linux/platform_data/mmp_audio.h @@ -0,0 +1,22 @@ +/* + * MMP Platform AUDIO Management + * + * Copyright (c) 2011 Marvell Semiconductors Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef MMP_AUDIO_H +#define MMP_AUDIO_H + +struct mmp_audio_platdata { + u32 period_max_capture; + u32 buffer_max_capture; + u32 period_max_playback; + u32 buffer_max_playback; +}; + +#endif /* MMP_AUDIO_H */ diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index d94804aca764..944b01dd103e 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -52,13 +52,4 @@ struct mv_usb_platform_data { int (*set_vbus)(unsigned int vbus); int (*private_init)(void __iomem *opregs, void __iomem *phyregs); }; - -#ifndef CONFIG_HAVE_CLK -/* Dummy stub for clk framework */ -#define clk_get(dev, id) NULL -#define clk_put(clock) do {} while (0) -#define clk_enable(clock) do {} while (0) -#define clk_disable(clock) do {} while (0) -#endif - #endif diff --git a/include/linux/platform_data/omap_drm.h b/include/linux/platform_data/omap_drm.h new file mode 100644 index 000000000000..3da73bdc2031 --- /dev/null +++ b/include/linux/platform_data/omap_drm.h @@ -0,0 +1,52 @@ +/* + * DRM/KMS platform data for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __PLATFORM_DATA_OMAP_DRM_H__ +#define __PLATFORM_DATA_OMAP_DRM_H__ + +/* + * Optional platform data to configure the default configuration of which + * pipes/overlays/CRTCs are used.. if this is not provided, then instead the + * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to + * one manager, with priority given to managers that are connected to + * detected devices. Remaining overlays are used as video planes. This + * should be a good default behavior for most cases, but yet there still + * might be times when you wish to do something different. + */ +struct omap_kms_platform_data { + /* overlays to use as CRTCs: */ + int ovl_cnt; + const int *ovl_ids; + + /* overlays to use as video planes: */ + int pln_cnt; + const int *pln_ids; + + int mgr_cnt; + const int *mgr_ids; + + int dev_cnt; + const char **dev_names; +}; + +struct omap_drm_platform_data { + struct omap_kms_platform_data *kms_pdata; +}; + +#endif /* __PLATFORM_DATA_OMAP_DRM_H__ */ diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h new file mode 100644 index 000000000000..8b79e0967f9c --- /dev/null +++ b/include/linux/platform_data/s3c-hsotg.h @@ -0,0 +1,40 @@ +/* include/linux/platform_data/s3c-hsotg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C USB2.0 High-speed / OtG platform information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LINUX_USB_S3C_HSOTG_H +#define __LINUX_USB_S3C_HSOTG_H + +enum s3c_hsotg_dmamode { + S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ + S3C_HSOTG_DMA_ONLY, /* always use DMA */ + S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */ +}; + +/** + * struct s3c_hsotg_plat - platform data for high-speed otg/udc + * @dma: Whether to use DMA or not. + * @is_osc: The clock source is an oscillator, not a crystal + */ +struct s3c_hsotg_plat { + enum s3c_hsotg_dmamode dma; + unsigned int is_osc:1; + int phy_type; + + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd); + +#endif /* __LINUX_USB_S3C_HSOTG_H */ diff --git a/include/linux/platform_data/spear_thermal.h b/include/linux/platform_data/spear_thermal.h deleted file mode 100644 index 724f2e1cbbcb..000000000000 --- a/include/linux/platform_data/spear_thermal.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * SPEAr thermal driver platform data. - * - * Copyright (C) 2011-2012 ST Microelectronics - * Author: Vincenzo Frascino <vincenzo.frascino@st.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef SPEAR_THERMAL_H -#define SPEAR_THERMAL_H - -/* SPEAr Thermal Sensor Platform Data */ -struct spear_thermal_pdata { - /* flags used to enable thermal sensor */ - unsigned int thermal_flags; -}; - -#endif /* SPEAR_THERMAL_H */ diff --git a/include/linux/platform_data/tegra_usb.h b/include/linux/platform_data/tegra_usb.h index 6bca5b569acb..66c673fef408 100644 --- a/include/linux/platform_data/tegra_usb.h +++ b/include/linux/platform_data/tegra_usb.h @@ -26,6 +26,7 @@ struct tegra_ehci_platform_data { /* power down the phy on bus suspend */ int power_down_on_bus_suspend; void *phy_config; + int vbus_gpio; }; #endif /* _TEGRA_USB_H_ */ diff --git a/include/linux/platform_data/wiznet.h b/include/linux/platform_data/wiznet.h new file mode 100644 index 000000000000..b5d8c192d84d --- /dev/null +++ b/include/linux/platform_data/wiznet.h @@ -0,0 +1,24 @@ +/* + * Ethernet driver for the WIZnet W5x00 chip. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef PLATFORM_DATA_WIZNET_H +#define PLATFORM_DATA_WIZNET_H + +#include <linux/if_ether.h> + +struct wiznet_platform_data { + int link_gpio; + u8 mac_addr[ETH_ALEN]; +}; + +#ifndef CONFIG_WIZNET_BUS_SHIFT +#define CONFIG_WIZNET_BUS_SHIFT 0 +#endif + +#define W5100_BUS_DIRECT_SIZE (0x8000 << CONFIG_WIZNET_BUS_SHIFT) +#define W5300_BUS_DIRECT_SIZE (0x0400 << CONFIG_WIZNET_BUS_SHIFT) + +#endif /* PLATFORM_DATA_WIZNET_H */ |