| Age | Commit message (Collapse) | Author |
|---|
|
With commit a81dbd0463ec ("serial: imx: set receiver level before
starting uart") we set the receiver level to its default value. This
caused a regression when using SDMA, where the receiver level is 9
instead of 8 (default). This change will first check if the receiver
level is zero and only then set it to the default. This still avoids the
interrupt storm when the receiver level is zero.
Fixes: a81dbd0463ec ("serial: imx: set receiver level before starting uart")
Cc: stable <stable@kernel.org>
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Link: https://lore.kernel.org/r/20240703112543.148304-1-eichest@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct error handling within the dcmipp_create_subdevs by properly
decrementing the i counter when releasing the subdevs.
Fixes: 28e0f3772296 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[hverkuil: correct the indices: it's [i], not [i - 1].]
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for v6.11
Coresight/hwtracing subsystem updates targeting v6.11 includes a few minor
fixes and cleanups
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
hwtracing: use for_each_endpoint_of_node()
coresight: constify the struct device_type usage
coresight: tmc: Remove duplicated include in coresight-tmc-core.c
coresight: Fix ref leak when of_coresight_parse_endpoint() fails
|
|
Commit 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
made sure that the IEs data was manipulated under the relevant RCU section.
Unfortunately, while doing so, the commit brought a faulty implicit cast
from int to u8 on the ies_len variable, making the parsing fail to be
performed correctly if the IEs block is larger than 255 bytes. This failure
can be observed with Access Points appending a lot of IEs TLVs in their
beacon frames (reproduced with a Pixel phone acting as an Access Point,
which brough 273 bytes of IE data in my testing environment).
Fix IEs parsing by removing this undesired implicit cast.
Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jozef Hopko <jozef.hopko@altana.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240701-wilc_fix_ies_data-v1-1-7486cbacf98a@bootlin.com
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Counter updates for 6.11
Primarily consists of cleanups and updates for ti-eqep; ti-eqep now
supports over/underflow events and can be build for K3 devices. In
addition, ftm-quaddec is updated to add a missing MODULE_DESCRIPTION()
macro.
* tag 'counter-updates-for-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: ti-eqep: Allow eQEP driver to be built for K3 devices
counter/ti-eqep: Add new ti-am62-eqep compatible
dt-bindings: counter: Add new ti,am62-eqep compatible
counter: ti-eqep: remove counter_priv() wrapper
counter: ti-eqep: remove unused struct member
counter: ti-eqep: implement over/underflow events
counter: ftm-quaddec: add missing MODULE_DESCRIPTION() macro
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.11
Just two cleanups for W1 core code.
* tag 'w1-drv-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: Drop allocation error message
w1: Add missing newline and fix typos in w1_bus_master comment
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.11-rc1
FPGA unit test:
- Macro's change re-enables FPGA KUnit test suites been configured as
loadable module.
Altera:
- David's change removes unused structure definition.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: altera-fpga2sdram: remove unused struct 'prop_map'
Revert "fpga: disable KUnit test suites when module support is enabled"
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.10-rc6
Here are some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.10-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit generic core-dump composition
USB: serial: option: add Fibocom FM350-GL
USB: serial: option: add Telit FN912 rmnet compositions
|
|
For SDX72 MBIM mode, it starts data mux id from 112 instead of 0.
This would lead to device can't ping outside successfully.
Also MBIM side would report "bad packet session (112)". In order
to fix this issue, we decide to use the device name of MHI
controller to do a match in wwan side. Then wwan driver could
set a corresponding mux_id value according to the MHI product.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240701021216.17734-3-slark_xiao@163.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
MHI devices usually have a product/device name to identify each device
uniquely. So let's specify that name in 'struct mhi_controller' so that the
client drivers can use this name to uniquely identify the devices and apply
any device specific quirks.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240701021216.17734-2-slark_xiao@163.com
[mani: reworked subject and description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add support for Foxconn SDX72 based modems, T99W515 and DW5934E.
Existing SDX55 channel/event configs are reused with the custom
ready_timeout_ms value to workaround firmware issue.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240701021216.17734-1-slark_xiao@163.com
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
bgpio_bits must be aligned with the data bus width. For example, on a
32 bit big endian system and we only have 16 GPIOs. If we only assume
bgpio_bits=16 we can never control the GPIO because the base address
is the lowest address.
low address high address
-------------------------------------------------
| byte3 | byte2 | byte1 | byte0 |
-------------------------------------------------
| NaN | NaN | gpio8-15 | gpio0-7 |
-------------------------------------------------
Fixes: 55b2395e4e92 ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Fixes: https://github.com/openwrt/openwrt/issues/15739
Reported-by: Mark Mentovai <mark@mentovai.com>
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Suggested-By: Mark Mentovai <mark@mentovai.com>
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Lóránd Horváth <lorand.horvath82@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/TYCP286MB089577B47D70F0AB25ABA6F5BCD52@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Panfrost DRM driver uses devfreq to perform DVFS, while using simple_ondemand
devfreq governor by default. This causes driver initialization to fail on
boot when simple_ondemand governor isn't built into the kernel statically,
as a result of the missing module dependency and, consequently, the required
governor module not being included in the initial ramdisk. Thus, let's mark
simple_ondemand governor as a softdep for Panfrost, to have its kernel module
included in the initial ramdisk.
This is a rather longstanding issue that has forced distributions to build
devfreq governors statically into their kernels, [1][2] or has forced users
to introduce some unnecessary workarounds. [3]
For future reference, not having support for the simple_ondemand governor in
the initial ramdisk produces errors in the kernel log similar to these below,
which were taken from a Pine64 RockPro64:
panfrost ff9a0000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't initialize GPU devfreq
panfrost ff9a0000.gpu: Fatal error during GPU init
panfrost: probe of ff9a0000.gpu failed with error -22
Having simple_ondemand marked as a softdep for Panfrost may not resolve this
issue for all Linux distributions. In particular, it will remain unresolved
for the distributions whose utilities for the initial ramdisk generation do
not handle the available softdep information [4] properly yet. However, some
Linux distributions already handle softdeps properly while generating their
initial ramdisks, [5] and this is a prerequisite step in the right direction
for the distributions that don't handle them properly yet.
[1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/linux61/config?ref_type=heads#L8180
[2] https://salsa.debian.org/kernel-team/linux/-/merge_requests/1066
[3] https://forum.pine64.org/showthread.php?tid=15458
[4] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d
[5] https://github.com/archlinux/mkinitcpio/commit/97ac4d37aae084a050be512f6d8f4489054668ad
Cc: Diederik de Haas <didi.debian@cknow.org>
Cc: Furkan Kardame <f.kardame@manjaro.org>
Cc: stable@vger.kernel.org
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4e1e00422a14db4e2a80870afb704405da16fd1b.1718655077.git.dsimic@manjaro.org
|
|
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The arm64 asm/arm_pmuv3.h depends on defines from
linux/perf/arm_pmuv3.h. Rather than depend on include order, follow the
usual pattern of "linux" headers including "asm" headers of the same
name.
With this change, the include of linux/kvm_host.h is problematic due to
circular includes:
In file included from ../arch/arm64/include/asm/arm_pmuv3.h:9,
from ../include/linux/perf/arm_pmuv3.h:312,
from ../include/kvm/arm_pmu.h:11,
from ../arch/arm64/include/asm/kvm_host.h:38,
from ../arch/arm64/mm/init.c:41:
../include/linux/kvm_host.h:383:30: error: field 'arch' has incomplete type
Switching to asm/kvm_host.h solves the issue.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240626-arm-pmu-3-9-icntr-v2-5-c9784b4f4065@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There are no non-DT based PMU users for v6 or v7, so drop the custom
non-DT probe table. Unfortunately XScale still needs non-DT probing.
Note that this drops support for arm1156 PMU, but there are no arm1156
based systems supported in the kernel.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240626-arm-pmu-3-9-icntr-v2-4-c9784b4f4065@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
It is preferred to put drivers under drivers/ rather than under arch/.
The PMU drivers also depend on arm_pmu.c, so it's better to place them
all together.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240626-arm-pmu-3-9-icntr-v2-3-c9784b4f4065@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The IS_ENABLED(CONFIG_ARM64) check for threshold support is unnecessary.
The purpose is to not enable thresholds on arm32, but if threshold is
non-zero, the check against threshold_max() just above here will have
errored out because threshold_max() is always 0 on arm32.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Mark rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240626-arm-pmu-3-9-icntr-v2-2-c9784b4f4065@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If the user has requested a counting threshold for the CPU cycles event,
then the fixed cycle counter can't be assigned as it lacks threshold
support. Currently, the thresholds will work or not randomly depending
on which counter the event is assigned.
While using thresholds for CPU cycles doesn't make much sense, it can be
useful for testing purposes.
Fixes: 816c26754447 ("arm64: perf: Add support for event counting threshold")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240626-arm-pmu-3-9-icntr-v2-1-c9784b4f4065@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the DSI host found on SM7150.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/601231/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The binding is supposed to describe the properties of each element
of the pinctrl-single,gpio-range array entry, however when we use
"- items:" instead of "items:", it explicitly describes that there
is just a single entry in the array.
The pinctrl-single,gpio-range property should describe more than one
entry in the array. Fix the typo and adjust the alignment of the
description of the entries appropriately.
Fixes: 677a62482bd6 ("dt-bindings: pinctrl: Update pinctrl-single to use yaml")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20240627150610.469645-1-nm@ti.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add the following missing pin group and mux function:
smb6b, smb6c, smb6d, smb7b, smb7c, smb7d, bu4, bu4b, bu5, bu5b, bu6,
gpo187.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/20240630090104.565779-1-tmaimon77@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The "pinctrl-single,input-schmitt" have four arguments in the bindings
but the driver needs two. According to the meaning of other properties
and driver, it should have "enable" suffix. Fortunately, there is no
dts using this property, so it is safe to correct this property with the
right name.
Rename existed property "pinctrl-single,input-schmitt" to
"pinctrl-single,input-schmitt-enable" and add the right description for
property "pinctrl-single,input-schmitt" used by the driver.
Fixes: 677a62482bd6 ("dt-bindings: pinctrl: Update pinctrl-single to use yaml")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/IA1PR20MB4953D5E7D7D68DDCE31C0031BBCF2@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use scope based of_node_put() cleanup to simplify code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/20240627131721.678727-4-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use scope based of_node_put() cleanup to simplify code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/20240627131721.678727-3-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use scope based of_node_put() cleanup to simplify code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/20240627131721.678727-2-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Account for more than only 23 GPIOs in LPASS Low Power Island pinctrl
generic driver. The previous value 23 was chosen to satisfy existing
SoC-specific drivers. However SM4250 LPI pinctrl uses more than 23 GPIOs
and its probe routine fails on:
if (WARN_ON(data->npins > MAX_NR_GPIO))
return -EINVAL;
with the following message:
[ 10.709014] ------------[ cut here ]------------
[ 10.719085] WARNING: CPU: 1 PID: 56 at
drivers/pinctrl/qcom/pinctrl-lpass-lpi.c:446
lpi_pinctrl_probe+0x308/0x388 [pinctrl_lpass_lpi]
[ 10.719108] Modules linked in: [...]
[ 10.719238] CPU: 1 PID: 56 Comm: kworker/u33:0 Not tainted
6.10.0-rc2-00012-ge45ddb1f8d34-dirty #7
[ 10.719245] Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT)
[ 10.719250] Workqueue: events_unbound deferred_probe_work_func
[ 10.719265] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 10.719271] pc : lpi_pinctrl_probe+0x308/0x388 [pinctrl_lpass_lpi]
[ 10.719278] lr : lpi_pinctrl_probe+0x44/0x388 [pinctrl_lpass_lpi]
...
[ 10.719357] Call trace:
[ 10.719361] lpi_pinctrl_probe+0x308/0x388 [pinctrl_lpass_lpi]
[ 10.719369] platform_probe+0x68/0xc4
[ 10.719378] really_probe+0xbc/0x29c
[ 10.719384] __driver_probe_device+0x78/0x12c
[ 10.719390] driver_probe_device+0xd8/0x15c
[ 10.719395] __device_attach_driver+0xb8/0x134
[ 10.719401] bus_for_each_drv+0x88/0xe8
[ 10.719407] __device_attach+0xa0/0x190
[ 10.719412] device_initial_probe+0x14/0x20
[ 10.719418] bus_probe_device+0xac/0xb0
[ 10.719423] deferred_probe_work_func+0x88/0xc0
[ 10.719429] process_one_work+0x150/0x294
[ 10.719439] worker_thread+0x2f8/0x408
[ 10.719445] kthread+0x110/0x114
[ 10.719452] ret_from_fork+0x10/0x20
[ 10.719459] ---[ end trace 0000000000000000 ]---
[ 10.719589] qcom-sm4250-lpass-lpi-pinctrl a7c0000.pinctrl: probe
with driver qcom-sm4250-lpass-lpi-pinctrl failed with error -22
Fixes: c2e5a25e8d88 ("pinctrl: qcom: Introduce SM4250 LPI pinctrl driver")
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/20240627003654.242870-1-alexey.klimov@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Change CS35L56_MAIN_RENDER_USER_VOLUME_MAX to 48, to limit the maximum
value of the Speaker Volume control to +12dB. The minimum value is
unchanged so that the default 0dB has the same integer control value.
The original maximum of 400 (+100dB) was the largest value that can be
mathematically handled by the DSP. The actual maximum amplification is
+12dB.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240703095517.208077-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "Speaker Volume" control was being defined using four hardcoded magic
numbers. There are #defines in the cs35l56.h header for these numbers, so
change the code to use the defined constants.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240703095517.208077-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
arch/s390/include/asm/kvm_host.h includes linux/kvm_host.h, but
linux/kvm_host.h includes asm/kvm_host.h .
It turns out that arch/s390/include/asm/kvm_host.h only needs
linux/kvm_types.h, which it already includes.
Stop including linux/kvm_host.h from arch/s390/include/asm/kvm_host.h .
Due to the #ifdef guards, the code works as it is today, but it's ugly
and it will get in the way of future patches.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20240702155606.71398-1-imbrenda@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240702155606.71398-1-imbrenda@linux.ibm.com>
|
|
When BHI mitigation is enabled, if SYSENTER is invoked with the TF flag set
then entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls the
clear_bhb_loop() before the TF flag is cleared. This causes the #DB handler
(exc_debug_kernel()) to issue a warning because single-step is used outside the
entry_SYSENTER_compat() function.
To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORY
after making sure the TF flag is cleared.
The problem can be reproduced with the following sequence:
$ cat sysenter_step.c
int main()
{ asm("pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter"); }
$ gcc -o sysenter_step sysenter_step.c
$ ./sysenter_step
Segmentation fault (core dumped)
The program is expected to crash, and the #DB handler will issue a warning.
Kernel log:
WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160
...
RIP: 0010:exc_debug_kernel+0xd2/0x160
...
Call Trace:
<#DB>
? show_regs+0x68/0x80
? __warn+0x8c/0x140
? exc_debug_kernel+0xd2/0x160
? report_bug+0x175/0x1a0
? handle_bug+0x44/0x90
? exc_invalid_op+0x1c/0x70
? asm_exc_invalid_op+0x1f/0x30
? exc_debug_kernel+0xd2/0x160
exc_debug+0x43/0x50
asm_exc_debug+0x1e/0x40
RIP: 0010:clear_bhb_loop+0x0/0xb0
...
</#DB>
<TASK>
? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d
</TASK>
[ bp: Massage commit message. ]
Fixes: 7390db8aea0d ("x86/bhi: Add support for clearing branch history at syscall entry")
Reported-by: Suman Maity <suman.m.maity@oracle.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240524070459.3674025-1-alexandre.chartre@oracle.com
|
|
In the previous review cycle the regmap cache update code was
questioned since it seems and odd way of using regmap_update_bits().
Thus update the regmap cache modification code to better explain
what it does and why it's done. This is no functional change, but
it's improving code maintainability.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/20240626084525.787298-2-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use the guard mutex from cleanup.h to make the code more readable.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/20240626084525.787298-1-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
With ARCH=um, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/hostfs/hostfs.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240702-md-um-fs-hostfs-v1-1-fd2b565027e7@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With ARCH=um, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/um/drivers/harddog.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240702-md-um-arch-um-drivers-v1-1-79e4f50b5bab@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With external time travel, a LOT of message can end up
being exchanged on the socket, taking a significant
amount of time just to do that.
Add a new shared memory optimisation to that, where a
number of changes are made:
- the controller sends a client ID and a shared memory FD
(and a logging FD we don't use) in the ACK message to
the initial START
- the shared memory holds the current time and the
free_until value, so that there's no need to exchange
messages for that
- if the client that's running has shared memory support,
any client (the running one included) can request the
next time it wants to run inside the shared memory,
rather than sending a message, by also updating the
free_until value
- when shared memory is enabled, RUN/WAIT messages no
longer have an ACK, further cutting down on messages
Together, this can reduce the number of messages very
significantly, and reduce overall test/simulation run time.
Co-developed-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://patch.msgid.link/20240702192118.6ad0a083f574.Ie41206c8ce4507fe26b991937f47e86c24ca7a31@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For the upcoming shared-memory time-travel external
optimisations, we need to be able to mmap/mremap.
Add the necessary OS calls.
Link: https://patch.msgid.link/20240702192118.ca4472963638.Ic2da1d3a983fe57340c1b693badfa9c5bd2d8c61@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Change os_rcv_fd() to os_rcv_fd_msg() that can more generally
receive any number of FDs in any kind of message.
Link: https://patch.msgid.link/20240702192118.40b78b2bfe4e.Ic6ec12d72630e5bcae1e597d6bd5c6f29f441563@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a message type to the time-travel protocol to broadcast
a small (64-bit) value to all participants in a simulation.
The main use case is to have an identical message come to
all participants in a simulation, e.g. to separate out logs
for different tests running in a single simulation.
Down in the guts of time_travel_handle_message() we can't
use printk() and not even printk_deferred(), so just store
the message and print it at the start of the userspace()
function.
Unfortunately this means that other prints in the kernel
can actually bypass the message, but in most cases where
this is used, for example to separate test logs, userspace
will be involved. Also, even if we could use
printk_deferred(), we'd still need to flush it out in the
userspace() function since otherwise userspace messages
might cross it.
As a result, this is a reasonable compromise, there's no
need to have any core changes and it solves the main use
case we have for it.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://patch.msgid.link/20240702192118.c4093bc5b15e.I2ca8d006b67feeb866ac2017af7b741c9e06445a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Both memdup_user() and vmemdup_user() handle allocations that are
regularly used for exploiting use-after-free type confusion flaws in
the kernel (e.g. prctl() PR_SET_VMA_ANON_NAME[1] and setxattr[2][3][4]
respectively).
Since both are designed for contents coming from userspace, it allows
for userspace-controlled allocation sizes. Use a dedicated set of kmalloc
buckets so these allocations do not share caches with the global kmalloc
buckets.
After a fresh boot under Ubuntu 23.10, we can see the caches are already
in active use:
# grep ^memdup /proc/slabinfo
memdup_user-8k 4 4 8192 4 8 : ...
memdup_user-4k 8 8 4096 8 8 : ...
memdup_user-2k 16 16 2048 16 8 : ...
memdup_user-1k 0 0 1024 16 4 : ...
memdup_user-512 0 0 512 16 2 : ...
memdup_user-256 0 0 256 16 1 : ...
memdup_user-128 0 0 128 32 1 : ...
memdup_user-64 256 256 64 64 1 : ...
memdup_user-32 512 512 32 128 1 : ...
memdup_user-16 1024 1024 16 256 1 : ...
memdup_user-8 2048 2048 8 512 1 : ...
memdup_user-192 0 0 192 21 1 : ...
memdup_user-96 168 168 96 42 1 : ...
Link: https://starlabs.sg/blog/2023/07-prctl-anon_vma_name-an-amusing-heap-spray/ [1]
Link: https://duasynt.com/blog/linux-kernel-heap-spray [2]
Link: https://etenal.me/archives/1336 [3]
Link: https://github.com/a13xp0p0v/kernel-hack-drill/blob/master/drill_exploit_uaf.c [4]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The msg subsystem is a common target for exploiting[1][2][3][4][5][6][7]
use-after-free type confusion flaws in the kernel for both read and write
primitives. Avoid having a user-controlled dynamically-size allocation
share the global kmalloc cache by using a separate set of kmalloc buckets
via the kmem_buckets API.
Link: https://blog.hacktivesecurity.com/index.php/2022/06/13/linux-kernel-exploit-development-1day-case-study/ [1]
Link: https://hardenedvault.net/blog/2022-11-13-msg_msg-recon-mitigation-ved/ [2]
Link: https://www.willsroot.io/2021/08/corctf-2021-fire-of-salvation-writeup.html [3]
Link: https://a13xp0p0v.github.io/2021/02/09/CVE-2021-26708.html [4]
Link: https://google.github.io/security-research/pocs/linux/cve-2021-22555/writeup.html [5]
Link: https://zplin.me/papers/ELOISE.pdf [6]
Link: https://syst3mfailure.io/wall-of-perdition/ [7]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Dedicated caches are available for fixed size allocations via
kmem_cache_alloc(), but for dynamically sized allocations there is only
the global kmalloc API's set of buckets available. This means it isn't
possible to separate specific sets of dynamically sized allocations into
a separate collection of caches.
This leads to a use-after-free exploitation weakness in the Linux
kernel since many heap memory spraying/grooming attacks depend on using
userspace-controllable dynamically sized allocations to collide with
fixed size allocations that end up in same cache.
While CONFIG_RANDOM_KMALLOC_CACHES provides a probabilistic defense
against these kinds of "type confusion" attacks, including for fixed
same-size heap objects, we can create a complementary deterministic
defense for dynamically sized allocations that are directly user
controlled. Addressing these cases is limited in scope, so isolating these
kinds of interfaces will not become an unbounded game of whack-a-mole. For
example, many pass through memdup_user(), making isolation there very
effective.
In order to isolate user-controllable dynamically-sized
allocations from the common system kmalloc allocations, introduce
kmem_buckets_create(), which behaves like kmem_cache_create(). Introduce
kmem_buckets_alloc(), which behaves like kmem_cache_alloc(). Introduce
kmem_buckets_alloc_track_caller() for where caller tracking is
needed. Introduce kmem_buckets_valloc() for cases where vmalloc fallback
is needed. Note that these caches are specifically flagged with
SLAB_NO_MERGE, since merging would defeat the entire purpose of the
mitigation.
This can also be used in the future to extend allocation profiling's use
of code tagging to implement per-caller allocation cache isolation[1]
even for dynamic allocations.
Memory allocation pinning[2] is still needed to plug the Use-After-Free
cross-allocator weakness (where attackers can arrange to free an
entire slab page and have it reallocated to a different cache),
but that is an existing and separate issue which is complementary
to this improvement. Development continues for that feature via the
SLAB_VIRTUAL[3] series (which could also provide guard pages -- another
complementary improvement).
Link: https://lore.kernel.org/lkml/202402211449.401382D2AF@keescook [1]
Link: https://googleprojectzero.blogspot.com/2021/10/how-simple-linux-kernel-memory.html [2]
Link: https://lore.kernel.org/lkml/20230915105933.495735-1-matteorizzo@google.com/ [3]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Plumb kmem_buckets arguments through kvmalloc_node_noprof() so it is
possible to provide an API to perform kvmalloc-style allocations with
a particular set of buckets. Introduce kvmalloc_buckets_node() that takes a
kmem_buckets argument.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Introduce CONFIG_SLAB_BUCKETS which provides the infrastructure to
support separated kmalloc buckets (in the following kmem_buckets_create()
patches and future codetag-based separation). Since this will provide
a mitigation for a very common case of exploits, it is recommended to
enable this feature for general purpose distros. By default, the new
Kconfig will be enabled if CONFIG_SLAB_FREELIST_HARDENED is enabled (and
it is added to the hardening.config Kconfig fragment).
To be able to choose which buckets to allocate from, make the buckets
available to the internal kmalloc interfaces by adding them as the
second argument, rather than depending on the buckets being chosen from
the fixed set of global buckets. Where the bucket is not available,
pass NULL, which means "use the default system kmalloc bucket set"
(the prior existing behavior), as implemented in kmalloc_slab().
To avoid adding the extra argument when !CONFIG_SLAB_BUCKETS, only the
top-level macros and static inlines use the buckets argument (where
they are stripped out and compiled out respectively). The actual extern
functions can then be built without the argument, and the internals
fall back to the global kmalloc buckets unconditionally.
Co-developed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Encapsulate the concept of a single set of kmem_caches that are used
for the kmalloc size buckets. Redefine kmalloc_caches as an array
of these buckets (for the different global cache buckets).
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
dev_t is a kernel type and may have different definitions
in kernel and userspace. On 32-bit x86 this currently makes
the stat structure being 4 bytes longer in the user code,
causing stack corruption.
However, this is (potentially) not the only problem, since
dev_t is a different type on user/kernel side, so we don't
know that the major/minor encoding isn't also different.
Decode/encode it instead to address both problems.
Cc: stable@vger.kernel.org
Fixes: 74ce793bcbde ("hostfs: Fix ephemeral inodes")
Link: https://patch.msgid.link/20240702092440.acc960585dd5.Id0767e12f562a69c6cd3c3262dc3d765db350cf6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can select ARCH_HAS_UBSAN, it works just fine. It had been
enabled and we even used it, but then commit 890a64810d59
("ubsan: Restore dependency on ARCH_HAS_UBSAN") (correctly)
disabled it again, enable ARCH_HAS_UBSAN to get it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240701220034.995eb04d656d.Ia29fe091b207fe66b5e26298c1e427ebcf131642@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Slab allocators have been guaranteeing natural alignment for
power-of-two sizes since commit 59bb47985c1d ("mm, sl[aou]b: guarantee
natural alignment for kmalloc(power-of-two)"), while any other sizes are
guaranteed to be aligned only to ARCH_KMALLOC_MINALIGN bytes (although
in practice are aligned more than that in non-debug scenarios).
Rust's allocator API specifies size and alignment per allocation, which
have to satisfy the following rules, per Alice Ryhl [1]:
1. The alignment is a power of two.
2. The size is non-zero.
3. When you round up the size to the next multiple of the alignment,
then it must not overflow the signed type isize / ssize_t.
In order to map this to kmalloc()'s guarantees, some requested
allocation sizes have to be padded to the next power-of-two size [2].
For example, an allocation of size 96 and alignment of 32 will be padded
to an allocation of size 128, because the existing kmalloc-96 bucket
doesn't guarantee alignent above ARCH_KMALLOC_MINALIGN. Without slab
debugging active, the layout of the kmalloc-96 slabs however naturally
align the objects to 32 bytes, so extending the size to 128 bytes is
wasteful.
To improve the situation we can extend the kmalloc() alignment
guarantees in a way that
1) doesn't change the current slab layout (and thus does not increase
internal fragmentation) when slab debugging is not active
2) reduces waste in the Rust allocator use case
3) is a superset of the current guarantee for power-of-two sizes.
The extended guarantee is that alignment is at least the largest
power-of-two divisor of the requested size. For power-of-two sizes the
largest divisor is the size itself, but let's keep this case documented
separately for clarity.
For current kmalloc size buckets, it means kmalloc-96 will guarantee
alignment of 32 bytes and kmalloc-196 will guarantee 64 bytes.
This covers the rules 1 and 2 above of Rust's API as long as the size is
a multiple of the alignment. The Rust layer should now only need to
round up the size to the next multiple if it isn't, while enforcing the
rule 3.
Implementation-wise, this changes the alignment calculation in
create_boot_cache(). While at it also do the calulation only for caches
with the SLAB_KMALLOC flag, because the function is also used to create
the initial kmem_cache and kmem_cache_node caches, where no alignment
guarantee is necessary.
In the Rust allocator's krealloc_aligned(), remove the code that padded
sizes to the next power of two (suggested by Alice Ryhl) as it's no
longer necessary with the new guarantees.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/all/CAH5fLggjrbdUuT-H-5vbQfMazjRDpp2%2Bk3%3DYhPyS17ezEqxwcw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAH5fLghsZRemYUwVvhk77o6y1foqnCeDzW4WZv6ScEWna2+_jw@mail.gmail.com/ [2]
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Current calculation of max_low_pfn is introduced in commit af84eab20891
("[PATCH] uml: fix LVM crash"). It is intended to set max_low_pfn to the
same value as max_pfn.
But I am not sure why the max_pfn is set to totalram_pages, which
represents the number of usable pages in system instead of an absolute
page frame number. (The change history stops there.)
While we have already calculate it in setup_physmem(), so not necessary
to do it again.
Also this would help changing totalram_pages accounting, since we plan
to move the accounting into __free_pages_core(). With this change,
totalram_pages may not represent the total usable pages at this point,
since some pages would be deferred initialized.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Alasdair G Kergon <agk@redhat.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Mike Rapoport (IBM) <rppt@kernel.org>
CC: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://patch.msgid.link/20240615034150.2958-1-richard.weiyang@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
At present, Rust in the kernel only supports 64-bit x86, so UML has
followed suit. However, it's significantly easier to support 32-bit i386
on UML than on bare metal, as UML does not use the -mregparm option
(which alters the ABI), which is not yet supported by rustc[1].
Add support for CONFIG_RUST on um/i386, by adding a new target config to
generate_rust_target, and replacing various checks on CONFIG_X86_64 to
also support CONFIG_X86_32.
We still use generate_rust_target, rather than a built-in rustc target,
in order to match x86_64, provide a future place for -mregparm, and more
easily disable floating point instructions.
With these changes, the KUnit tests pass with:
kunit.py run --make_options LLVM=1 --kconfig_add CONFIG_RUST=y
--kconfig_add CONFIG_64BIT=n --kconfig_add CONFIG_FORTIFY_SOURCE=n
An earlier version of these changes was proposed on the Rust-for-Linux
github[2].
[1]: https://github.com/rust-lang/rust/issues/116972
[2]: https://github.com/Rust-for-Linux/linux/pull/966
Signed-off-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/20240604224052.3138504-1-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
