summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-01drm/amd/display: Account for cursor prefetch BW in DML1 mode supportAlvin Lee
[Description] We need to ensure to take into account cursor prefetch BW in mode support or we may pass ModeQuery but fail an actual flip which will cause a hang. Flip may fail because the cursor_pre_bw is populated during mode programming (and mode programming is never called prior to ModeQuery). Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfgPin-yen Lin
Commit 2f7b1d8b5505 ("clk: mediatek: Do a runtime PM get on controllers during probe") enabled runtime PM for all mediatek clock controllers, but this introduced an issue on the resume path. If a device resumes earlier than the clock controller and calls clk_prepare() when runtime PM is enabled on the controller, it will end up calling clk_pm_runtime_get(). But the subsequent pm_runtime_resume_and_get() call will fail because the runtime PM is temporarily disabled during suspend. To workaround this, introduce a need_runtime_pm flag and only enable it on mt8183-mfgcfg, which is the driver that observed deadlock previously. Hopefully mt8183-cfgcfg won't run into the issue at the resume stage because the GPU should have stopped rendering before the system calls suspend. Fixes: 2f7b1d8b5505 ("clk: mediatek: Do a runtime PM get on controllers during probe") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Link: https://lore.kernel.org/r/20240613120357.1043342-1-treapking@chromium.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-07-01drm/amd/display: Add refresh rate range checkTom Chung
[Why] We only enable the VRR while monitor usable refresh rate range is greater than 10 Hz. But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ case. [How] Add a refresh rate range check before set the freesync_capable flag in DRM_EDID_FEATURE_CONTINUOUS_FREQ case. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Reset freesync config before update new stateTom Chung
[Why] Sometimes the new_crtc_state->vrr_infopacket did not sync up with the current state. It will affect the update_freesync_state_on_stream() does not update the state correctly. [How] Reset the freesync config before get_freesync_config_for_crtc() to make sure we have the correct new_crtc_state for VRR. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01Merge tag 'sunxi-clk-for-6.11' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull Allwinner SoC clk driver updates from Chen-Yu Tsai: - Remove unused 'struct gates_data' from old sunxi driver library - Add missing MODULE_DESCRIPTION() macros for sunxi-ng drivers - Add GPADC clock and reset for H616 * tag 'sunxi-clk-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: h616: Add clock/reset for GPADC dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks clk: sunxi: Remove unused struct 'gates_data' clk: sunxi-ng: add missing MODULE_DESCRIPTION() macros
2024-07-01Merge tag 'sunxi-clk-fixes-for-6.10' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull one Allwinner SoC clk driver fix for 6.10 - Fix min/max rate clamping that caused a regression back in 6.9 * tag 'sunxi-clk-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
2024-07-01Merge tag 'clk-meson-v6.11-1' of https://github.com/BayLibre/clk-meson into ↵Stephen Boyd
clk-amlogic Pull Amlogic clock driver updates from Jerome Brunet: - Minor S4 clock fixes - DT bindings Yaml conversion of the AXG audio controller - C3 clock controllers support - Flag added to skip init of already enabled PLLs and avoid relocking - A1 DT bindings updates for system pll support - Add missing MODULE_DESCRIPTION where necessary. * tag 'clk-meson-v6.11-1' of https://github.com/BayLibre/clk-meson: clk: meson: add missing MODULE_DESCRIPTION() macros dt-bindings: clock: meson: a1: peripherals: support sys_pll input dt-bindings: clock: meson: a1: pll: introduce new syspll bindings clk: meson: add 'NOINIT_ENABLED' flag to eliminate init for enabled PLL clk: meson: c3: add c3 clock peripherals controller driver clk: meson: c3: add support for the C3 SoC PLL clock dt-bindings: clock: add Amlogic C3 peripherals clock controller dt-bindings: clock: add Amlogic C3 SCMI clock controller support dt-bindings: clock: add Amlogic C3 PLL clock controller dt-bindings: clock: meson: Convert axg-audio-clkc to YAML format clk: meson: s4: fix pwm_j_div parent clock clk: meson: s4: fix fixed_pll_dco clock
2024-07-01drm/amdgpu: rewrite convert_tiling_flags_to_modifier_gfx12Marek Olšák
There were multiple bugs, like checking SWIZZLE_MODE before checking GFX12_SWIZZLE_MODE, which has undefined behavior. The function had no effect before (it always returned -EINVAL). Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/radeon: check bo_va->bo is non-NULL before using itPierre-Eric Pelloux-Prayer
The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it. Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdkfd: Use device based logging for errorsLijo Lazar
Convert some pr_* to some dev_* APIs to identify the device. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu: Fix hbm stack id in boot error reportHawking Zhang
To align with firmware, hbm id field 0x1 refers to hbm stack 0, 0x2 refers to hbm statck 1. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu: add amdgpu_framebuffer::gfx12_dccMarek Olšák
amdgpu_framebuffer doesn't have tiling_flags, so we need this. amdgpu_display_get_fb_info never gets NULL parameters, so checking for NULL was useless. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu/display: add all gfx12 modifiersMarek Olšák
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu/display: set plane attributes for gfx12 correctlyMarek Olšák
It used gfx9 flags, which has undefined behavior on gfx12. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu/display: handle gfx12 in amdgpu_dm_plane_format_mod_supportedMarek Olšák
All this code has undefined behavior on GFX12 and shouldn't be executed. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu: handle gfx12 in amdgpu_display_verify_sizesMarek Olšák
It verified GFX9-11 swizzle modes on GFX12, which has undefined behavior. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu: Correct register used to clear fault statusHawking Zhang
Driver should write to fault_cntl registers to do one-shot address/status clear. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu: don't use amdgpu_lookup_format_info on gfx12Marek Olšák
It only uses fields for GFX9-11 related to the separate DCC buffer, which doesn't exist in GFX12. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu/display: handle gfx12 in dm_check_cursor_fbMarek Olšák
Checking SWIZZLE_MODE has undefined behavior on gfx12. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu: remove AMD_FMT_MOD_GFX12_DCC_MAX_COMPRESSED_BLOCK_* definitionsMarek Olšák
They were added accidentally. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu/gfx12: remove GDS leftoversMarek Olšák
GDS doesn't exist in gfx12. The incomplete packet allows userspace to hang the hw from the kernel. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu/gfx12: remove superfluous cache flagsMarek Olšák
If any INV flags are needed, they should be executed via ACQUIRE_MEM before INDIRECT_BUFFER. GLM flags are also removed because the hw ignores them. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu/gfx11: remove superfluous cache flagsMarek Olšák
If any INV flags are needed, they should be executed via ACQUIRE_MEM before INDIRECT_BUFFER. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amdgpu: check for LINEAR_ALIGNED correctly in check_tiling_flags_gfx6Marek Olšák
Fix incorrect check. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: 3.2.291Aric Cyr
* FW Release 0.0.224.0 * Fix bw issue for dcn351 * Fix FAMS2 logic issue for dcn401 * Fix Coverity issues * Fix cursor issues * Refactor dio sources Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupportRoman Li
[Why] Potential out of bounds access in dml2_calculate_rq_and_dlg_params() because the value of out_lowest_state_idx used as an index for FCLKChangeSupport array can be greater than 1. [How] Currently dml2 core specifies identical values for all FCLKChangeSupport elements. Always use index 0 in the condition to avoid out of bounds access. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Update efficiency bandwidth for dcn351Fangzhi Zuo
Fix 4k240 underflow on dcn351 Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Fix refresh rate range for some panelTom Chung
[Why] Some of the panels does not have the refresh rate range info in base EDID and only have the refresh rate range info in DisplayID block. It will cause the max/min freesync refresh rate set to 0. [How] Try to parse the refresh rate range info from DisplayID if the max/min refresh rate is 0. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: replace CRTC disable function callXi (Alex) Liu
[Why] In OTG disable workarund, CRTC is disabled immediately to improve performance, but this may cause timing issue in DP HPO encoder FIFO and result in blank CRCs. [How] Replace the immediate CRTC disable call with normal disable call Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Xi (Alex) Liu <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Move dio files into dio folderBhuvanachandra Pinninti
[why] Refactor the code of dio to unit test. [how] Moved files to respective folders and changed cMakeLists and makefiles. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Account for cursor prefetch BW in DML1 mode supportAlvin Lee
[Description] We need to ensure to take into account cursor prefetch BW in mode support or we may pass ModeQuery but fail an actual flip which will cause a hang. Flip may fail because the cursor_pre_bw is populated during mode programming (and mode programming is never called prior to ModeQuery). Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: fix a crash when clock source is reference for non otg ↵Wenjing Liu
master pipe [why] The function enumerates all pipes without checking pipe type. It is only supposed to call program pixel clock for OTG master pipe only. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Fix dmub timeout after fams2 enabledFangzhi Zuo
Reset fams stream count upon stream removal, otherwise fams2 state machine in dmub will get corrupted. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Add debug option for disabling SLDO optimizationsNicholas Kazlauskas
[Why] DM can hook this up to disable SLDO optimizations in firmware during DMCUB initialization for debug purposes. [How] Add the option and pass it through dmub_srv. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: un-block 8k with single dimmPaul Hsieh
[Why] Driver doesn't validate multi-display with scaling when OS calls DDI. This behavior causes the validated result to be a mismatch between some automated test cases. To address this issue, some workaround was added that caused issues in 8k. [How] Since the origin issue had been root caused, revert the previous workaround and unblock 8k with a single dimm. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Add available bandwidth calculation for audioRyan Seto
[Why] Audio for 8K 240Hz monitor was not available when it should be [How] Added calculation based on stream state Co-developed-by: Ryan Seto <ryanseto@amd.com> Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01Merge tag 'renesas-clk-for-v6.11-tag2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Remove obsolete clock DT binding header files - Add Battery Backup (VBATTB) and I2C clocks, resets, and power domains on RZ/G3S - Add audio clocks on R-Car V4M - Add video capture (ISPCS, CSI-2, VIN) clocks on R-Car V4M - Miscellaneous fixes and improvements * tag 'renesas-clk-for-v6.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r9a08g045: Add clock, reset and power domain support for I2C clk: renesas: r8a779h0: Add Audio clocks clk: renesas: r9a08g045: Add clock, reset and power domain support for the VBATTB IP dt-bindings: clock: rcar-gen2: Remove obsolete header files dt-bindings: clock: r8a7779: Remove duplicate newline clk: renesas: Drop "Renesas" from individual driver descriptions clk: renesas: r8a779h0: Fix PLL2/PLL4 multipliers in comments clk: renesas: r8a779h0: Add VIN clocks dt-bindings: clock: renesas,rzg2l-cpg: Update description for #reset-cells clk: renesas: rcar-gen2: Use DEFINE_SPINLOCK() for static spinlock clk: renesas: cpg-lib: Use DEFINE_SPINLOCK() for global spinlock clk: renesas: r8a77970: Use common cpg_lock clk: renesas: r8a779h0: Add CSI-2 clocks clk: renesas: r8a779h0: Add ISPCS clocks
2024-07-01drm/amd/display: Add refresh rate range checkTom Chung
[Why] We only enable the VRR while monitor usable refresh rate range is greater than 10 Hz. But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ case. [How] Add a refresh rate range check before set the freesync_capable flag in DRM_EDID_FEATURE_CONTINUOUS_FREQ case. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Cleanup dce_get_dp_ref_freq_khzDillon Varone
[WHY&HOW] Cleanup unnecessary code pathes as compile guards were added and removed overtime. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Check denominator crb_pipes before usedAlex Hung
[WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Check denominator pbn_div before usedAlex Hung
[WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Adjust cursor visibility between MPC slicesNevenko Stupar
[Why & How] When MPC enabled, need to adjust x and hot spot x position on one pipe when the cursor is between MPC slices i.e. when the cursor is moving from one MPC slice to next slice, while whole cursor size is not contained within one pipe, to make part of the cursor to be visible on the other pipe. Reviewed-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Skip unnecessary abm disableSherry Wang
[Why] We try to disable abm immediately when it's being gradually disabled, which causes backlight ramping being paused in the middle [How] Don't disable abm immediately if abm has been or is being disabled through set_abm_level path Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Sherry Wang <yao.wang1@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Fix possible overflow in integer multiplicationAlex Hung
[WHAT & HOW] Integer multiplies integer may overflow in context that expects an expression of unsigned/siged long long (64 bits). This can be fixed by casting integer to unsigned/siged long long to force 64 bits results. This fixes 26 OVERFLOW_BEFORE_WIDEN issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Add ASIC cap to limit DCC surface widthGeorge Shen
[Why] Certain configurations of DCN401 require ODM4:1 to support DCC for 10K surfaces. DCC should be conservatively disabled in those cases. The issue is that current logic limits 10K surface DCC for all configurations of DCN401. [How] Add DC ASIC cap to indicate max surface width that can support DCC. Disable DCC if this ASIC cap is non-zero and surface width exceeds it. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Revert Add workaround to restrict max frac urgent for DPM0Teeger
This reverts commit 871512e36f9c1c2cb4e62eb860ca0438800e4d63 due to multiple issues found. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Teeger <gateeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Choose HUBP unbounded request based on DML outputSung Joon Kim
[why] Previously, we decide on the unbounded request purely based on pipe_cnt which is a wrong variable to use to determine how many pipes are in "use". DML already accounts for number of pipes in use along with other various factors and is a more reliable method of determination. [how] Use UnboundedRequestEnabledThisState to decide on unbounbded_req_enabled. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Remove unnecessary error messageJoshua Aberback
[Why] This error message is unnecessary because returning when aconnector is uninitialized is the desired outcome during initialization. As well, there is no equivalent error message for read_dpcd. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Fix divide by zero in CURSOR_DST_X_OFFSET calculationGeorge Shen
[Why] Certain situations cause pipes to have a recout of 0, such as when the dst_rect lies completely outside of a given ODM slice. [How] Skip calculation that transforms cursor coordinates to viewport space. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Reset freesync config before update new stateTom Chung
[Why] Sometimes the new_crtc_state->vrr_infopacket did not sync up with the current state. It will affect the update_freesync_state_on_stream() does not update the state correctly. [How] Reset the freesync config before get_freesync_config_for_crtc() to make sure we have the correct new_crtc_state for VRR. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-10-12 23:37:02 +0000