summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2024-03-14wifi: rtw88: Add rtw8703b.hFiona Klute
This is the main header for the new rtw88_8703b chip driver. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-5-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Add definitions for 8703b chipFiona Klute
default_cck_index is used in power track, the rx_cck_agc_report_type for RX PHY status. GET_RX_DESC_BW is an RX descriptor field not used by the other chip drivers. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-4-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Debug output for rtw8723x EFUSEFiona Klute
Some 8703b chips contain invalid EFUSE data, getting detailed information is critical when analyzing issues caused by that. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-3-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Shared module for rtw8723x devicesFiona Klute
The already supported 8723d chip is very similar to 8703b/8723cs, split code that can be shared into a new module. The spec definition tables are combined into a struct so we only need one EXPORT_SYMBOL for them all. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-2-fiona.klute@gmx.de
2024-03-14wifi: rtw89: 8922a: add 8922ae to Makefile and KconfigPing-Ke Shih
Add 8922AE to Makefile and Kconfig. Currently, it can support STA, AP and monitor modes with good performance. Implemented initial BT-coexistence function only, and will to fine tune this component. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-7-pkshih@realtek.com
2024-03-14wifi: rtw89: 8922a: update chip parameter for coexChing-Te Ku
Implement the chip operation function for 8922a, it related to TX power, RX gain, antenna position, packet priority and so on. Also assign coexistence priority table for hardware PTA using. Add settings to avoid uncertainties propagation when Wi-Fi Rx due to RF gain mismatch. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-6-pkshih@realtek.com
2024-03-14wifi: rtw89: coex: Add TDMA slot parameter setting version 7Ching-Te Ku
In order to packet up the slots information, the TLV header has updated. TDMA slot parameters also use the TLV header to packet up to H2C, so upgrade to version 7. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-5-pkshih@realtek.com
2024-03-14wifi: rtw89: coex: Add TDMA version 7Ching-Te Ku
In order to packet up the slots information, the TLV header has updated. TDMA also use the TLV header to packet up to H2C, so upgrade to version 7. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-4-pkshih@realtek.com
2024-03-14wifi: rtw89: coex: Add antenna setting function for RTL8922AChing-Te Ku
Because there is new hardware structure and Wi-Fi 7 protocol, the antenna settings need to concern more complex for Wi-Fi 7 using. The antenna setting included grant control signal, they decide which MAC/Port or Bluetooth can do traffic. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-3-pkshih@realtek.com
2024-03-14wifi: rtw89: coex: Add WiFi role info format version 8Ching-Te Ku
In order to control the hardware band and related protocol control, add version 8 format and related logic to control the mechanism. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-2-pkshih@realtek.com
2024-03-14wifi: rtw89: coex: fix configuration for shared antenna for 8922APing-Ke Shih
WiFi 2x2 + BT combo cards can be two or three physical antenna. For two antenna case, one antenna is shared by WiFi and BT, and different configuration should be applied. Fix the typo. This problem was found by Coccicheck, and actually that is a typo instead: rtw8922a.c:2235:2-4: WARNING: possible condition with no effect (if == else) Fixes: 652c9642eda6 ("wifi: rtw89: coex: add init_info H2C command format version 7") Closes: https://lore.kernel.org/linux-wireless/20240308074539.04512f66@kernel.org/ Cc: Ching-Te Ku <ku920601@realtek.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240309001348.9906-1-pkshih@realtek.com
2024-03-13Merge tag 'thermal-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These mostly change the thermal core in a few ways allowing thermal drivers to be simplified, in particular in their removal and failing probe handling parts that are notoriously prone to errors, and propagate the changes to several drivers. Apart from that, support for a new platform is added (Intel Lunar Lake-M), some bugs are fixed and some code is cleaned up, as usual. Specifics: - Store zone trips table and zone operations directly in struct thermal_zone_device (Rafael Wysocki) - Fix up flex array initialization during thermal zone device registration (Nathan Chancellor) - Rework writable trip points handling in the thermal core and several drivers (Rafael Wysocki) - Thermal core code cleanups (Dan Carpenter, Flavio Suligoi) - Use thermal zone accessor functions in the int340x Intel thermal driver (Rafael Wysocki) - Add Lunar Lake-M PCI ID to the int340x Intel thermal driver (Srinivas Pandruvada) - Minor fixes for thermal governors (Rafael Wysocki, Di Shen) - Trip point handling fixes for the iwlwifi wireless driver (Rafael Wysocki) - Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)" * tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits) thermal: core: remove unnecessary check in trip_point_hyst_store() thermal: intel: int340x_thermal: Use thermal zone accessor functions thermal: core: Remove excess empty line from a comment thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID thermal: core: Eliminate writable trip points masks thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: core: Drop the .set_trip_hyst() thermal zone operation thermal: core: Add flags to struct thermal_trip thermal: core: Move initial num_trips assignment before memcpy() thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS thermal: intel: Adjust ops handling during thermal zone registration thermal: ACPI: Constify acpi_thermal_zone_ops thermal: core: Store zone ops in struct thermal_zone_device thermal: intel: Discard trip tables after zone registration thermal: ACPI: Discard trips table after zone registration thermal: core: Store zone trips table in struct thermal_zone_device ...
2024-03-13Merge tag 'spi-v6.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This release sees some exciting changes from David Lechner which implements some optimisations that have been talked about for a long time which allows client drivers to pre-prepare SPI messages for repeated or low latency use. This lets us move work out of latency sensitive paths and avoid repeating work for frequently performed operations. As well as being useful in itself this will also be used in future to allow controllers to directly trigger SPI operations (eg, from interrupts). Otherwise this release has mostly been focused on cleanups, plus a couple of new devices: - Support for pre-optimising messages - A big set of updates from Uwe Kleine-König moving drivers to use APIs with more modern terminology for controllers - Major overhaul of the s3c64xx driver - Support for Google GS101 and Samsung Exynos850" * tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits) spi: Introduce SPI_INVALID_CS and is_valid_cs() spi: Fix types of the last chip select storage variables spi: Consistently use BIT for cs_index_mask spi: Exctract spi_dev_check_cs() helper spi: Exctract spi_set_all_cs_unused() helper spi: s3c64xx: switch exynos850 to new port config data spi: s3c64xx: switch gs101 to new port config data spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id spi: s3c64xx: get rid of the OF alias ID dependency spi: s3c64xx: introduce s3c64xx_spi_set_port_id() spi: s3c64xx: let the SPI core determine the bus number spi: s3c64xx: allow FIFO depth to be determined from the compatible spi: s3c64xx: retrieve the FIFO depth from the device tree spi: s3c64xx: determine the fifo depth only once spi: s3c64xx: allow full FIFO masks spi: s3c64xx: define a magic value spi: dt-bindings: introduce FIFO depth properties spi: axi-spi-engine: use struct_size() macro spi: axi-spi-engine: use __counted_by() attribute spi: axi-spi-engine: remove p from struct spi_engine_message_state ...
2024-03-12wifi: ath11k: don't force enable power save on non-running vdevsBaochen Qiang
Currently we force enable power save on non-running vdevs, this results in unexpected ping latency in below scenarios: 1. disable power save from userspace. 2. trigger suspend/resume. With step 1 power save is disabled successfully and we get a good latency: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=5.13 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=5.45 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=5.99 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.34 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=4.47 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=6.45 ms While after step 2, the latency becomes much larger: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=17.7 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=15.0 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=14.3 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=16.5 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=20.1 ms The reason is, with step 2, power save is force enabled due to vdev not running, although mac80211 was trying to disable it to honor userspace configuration: ath11k_pci 0000:03:00.0: wmi cmd sta powersave mode psmode 1 vdev id 0 Call Trace: ath11k_wmi_pdev_set_ps_mode ath11k_mac_op_bss_info_changed ieee80211_bss_info_change_notify ieee80211_reconfig ieee80211_resume wiphy_resume This logic is taken from ath10k where it was added due to below comment: Firmware doesn't behave nicely and consumes more power than necessary if PS is disabled on a non-started vdev. However we don't know whether such an issue also occurs to ath11k firmware or not. But even if it does, it's not appropriate because it goes against userspace, even cfg/mac80211 don't know we have enabled it in fact. Remove it to fix this issue. In this way we not only get a better latency, but also, and the most important, keeps the consistency between userspace and kernel/driver. The biggest price for that would be the power consumption, which is not that important, compared with the consistency. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: b2beffa7d9a6 ("ath11k: enable 802.11 power save mode in station mode") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240309113115.11498-1-quic_bqiang@quicinc.com
2024-03-12wifi: brcmfmac: pcie: handle randbuf allocation failureDuoming Zhou
The kzalloc() in brcmf_pcie_download_fw_nvram() will return null if the physical memory has run out. As a result, if we use get_random_bytes() to generate random bytes in the randbuf, the null pointer dereference bug will happen. In order to prevent allocation failure, this patch adds a separate function using buffer on kernel stack to generate random bytes in the randbuf, which could prevent the kernel stack from overflow. Fixes: 91918ce88d9f ("wifi: brcmfmac: pcie: Provide a buffer of random bytes to the device") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240306140437.18177-1-duoming@zju.edu.cn
2024-03-12wifi: rtw89: Correct EHT TX rate on 20MHz connectionDian-Syuan Yang
We used EHT capability of 20MHz-only as rate mask to RA (rate adaptive) H2C command when connecting with AP set EHT 20MHz. It would get the wrong rate mask and the MCS rate can only reach MCS11. According to the description of 802.11be spec, if all supported channel bandwidth field of HE PHY capabilities are zero, then the EHT capability of 20MHz-only is valid. As a result, we adjust the code to set correct rate mask based on HE PHY bandwidth capability. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240305004502.6655-1-pkshih@realtek.com
2024-03-11wifi: ath11k: adjust a comment to reflect realityKevin Lo
On QCA6390/QCN9074/WCN6855, MHISTATUS may still have SYSERR bit set after SOC_GLOBAL_RESET. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/ZeWEqGVibkMg2APi@ns.kevlo.org
2024-03-08Merge tag 'wireless-next-2024-03-08' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.9 The fourth "new features" pull request for v6.9 with changes both in stack and in drivers. The theme in this pull request is to fix sparse warnings but we still have some left in wireless subsystem. Otherwise quite normal. Major changes: rtw89 * NL80211_EXT_FEATURE_SCAN_RANDOM_SN support * NL80211_EXT_FEATURE_SET_SCAN_DWELL support rtw88 * support for more rtw8811cu and rtw8821cu devices mt76 * mt76x2u: add Netgear WNDA3100v3 USB * mt7915: newer ADIE version support * mt7925: radio temperature sensor support * mt7996: remove GCMP IGTK offload * tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits) wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode wifi: rtw89: wow: set security engine options for 802.11ax chips only wifi: rtw89: update suspend/resume for different generation wifi: rtw89: wow: update config mac function with different generation wifi: rtw89: update DMA function with different generation wifi: rtw89: wow: update WoWLAN status register for different generation wifi: rtw89: wow: update WoWLAN reason register for different chips wifi: brcm80211: handle pmk_op allocation failure wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR wifi: rtw89: coex: When Bluetooth not available don't set power/gain wifi: rtw89: coex: add return value to ensure H2C command is success or not wifi: rtw89: coex: Reorder H2C command index to align with firmware wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic wifi: rtw89: coex: add init_info H2C command format version 7 wifi: rtw89: 8922a: add coexistence helpers of SW grant wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt wifi: cw1200: restore endian swapping wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte wifi: rtw88: 8821c: Fix false alarm count ... ==================== Link: https://lore.kernel.org/r/20240308100429.B8EA2C433F1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08wifi: ath10k: poll service ready message before failingBaochen Qiang
Currently host relies on CE interrupts to get notified that the service ready message is ready. This results in timeout issue if the interrupt is not fired, due to some unknown reasons. See below logs: [76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received ... [76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110 And finally it causes WLAN interface bring up failure. Change to give it one more chance here by polling CE rings, before failing directly. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices") Reported-by: James Prestwood <prestwoj@gmail.com> Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2 Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
2024-03-08wifi: ath11k: fix soc_dp_stats debugfs file permissionJeff Johnson
Currently the soc_dp_stats debugfs file has the following permissions: # ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats -rw------- 1 root root 0 Mar 4 15:04 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats However this file does not actually support write operations -- no .write() method is registered. Therefore use the correct permissions when creating the file. After the change: # ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats -r-------- 1 root root 0 Mar 4 15:15 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240305-fix-soc_dp_stats-permission-v1-1-2ec10b42f755@quicinc.com
2024-03-08wifi: ath11k: remove obsolete struct wmi_start_scan_argJeff Johnson
ath11k inherited struct wmi_start_scan_arg from ath10k. However, in ath11k, this struct is unused -- struct scan_req_params is used for this functionality. So remove the unused struct. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240226-ath11k-obsolete-wmi_start_scan_arg-v1-1-c0b94c6e191d@quicinc.com
2024-03-08wifi: ath12k: remove obsolete struct wmi_start_scan_argJeff Johnson
ath12k inherited struct wmi_start_scan_arg from ath11k. However, in ath12k, this struct is unused -- struct ath12k_wmi_scan_req_arg is used for this functionality. So remove the unused struct. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240226-ath12k-obsolete-wmi_start_scan_arg-v1-1-07b0b563cb27@quicinc.com
2024-03-05Merge tag 'ath-next-20240305' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.9 Only some minor cleanup in ath11k and ath12k. Adding Jeff as the maintainer for ath10k, ath11k and ath12k DT bindings.
2024-03-05wifi: rtw89: wow: move release offload packet earlier for WoWLAN modeChin-Yen Lee
Now WoWLAN firmware will disable PCIE DMA after driver call cfg_wake function, and it will lead to release offload packet fail because driver can't receive completion notification from firmware. We move release offload packet earlier to avoid this error. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-8-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: set security engine options for 802.11ax chips onlyChin-Yen Lee
The security engine is set for management frames by default for 802.11be chips, so no need to set it in WoWLAN flow. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-7-pkshih@realtek.com
2024-03-05wifi: rtw89: update suspend/resume for different generationChin-Yen Lee
The setting during suspend or resume is different between different generation, so update it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-6-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update config mac function with different generationChin-Yen Lee
The registers to configure mac function for WoWLAN mode that are different from different generation, so update them. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-5-pkshih@realtek.com
2024-03-05wifi: rtw89: update DMA function with different generationChin-Yen Lee
The register of control and polling function for TX/RX DMA is different from different generation, so update them. Also rename polling_dma function to polling_dma_idle to avoid misunderstanding. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-4-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update WoWLAN status register for different generationChin-Yen Lee
The statue register is for driver to check if WoWLAN mode works or stops successfully. It is changed for new generation, so update it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-3-pkshih@realtek.com
2024-03-05wifi: rtw89: wow: update WoWLAN reason register for different chipsChin-Yen Lee
The WoWLAN reason register is used for driver to get the wakeup reason for reporting to cfg80211, and it is different from chips. So put it into chip information. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240302005828.13666-2-pkshih@realtek.com
2024-03-05wifi: brcm80211: handle pmk_op allocation failureDuoming Zhou
The kzalloc() in brcmf_pmksa_v3_op() will return null if the physical memory has run out. As a result, if we dereference the null value, the null pointer dereference bug will happen. Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails for pmk_op. Fixes: a96202acaea4 ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations") Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229103153.18533-1-duoming@zju.edu.cn
2024-03-05wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERRChing-Te Ku
The 2 Bluetooth profiles (Hands free profile & Human interface device) have high duty transmission, it will affect the traffic of WiFi packet frequently. And once the WiFi traffic down to B/G mode, it will need a better success rate to recover the transmission rate. Add new policy option to solve the above situation. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-9-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: When Bluetooth not available don't set power/gainChing-Te Ku
If Bluetooth is working, it will update their info regularly. And the code will increase the counters while the info updating. Use this counter to judge is Bluetooth working or not. Don't need to set Bluetooth power or gain when it is not working. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-8-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: add return value to ensure H2C command is success or notChing-Te Ku
Add return value to H2C function, and only record down the value while H2C command success, this can help us to check the real time status. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-7-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: Reorder H2C command index to align with firmwareChing-Te Ku
Wi-Fi firmware need some driver information to do decision or do some real-time control. Driver will update these information by H2C command. The chip 8922a H2C command index is different from before chips/branch, so need to assign the correct index to let firmware parsing. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-6-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: add BTC ctrl_info version 7 and related logicChing-Te Ku
Change structure member from bit field to normal variable to reduce unnecessary translation. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-5-pkshih@realtek.com
2024-03-05wifi: rtw89: coex: add init_info H2C command format version 7Ching-Te Ku
To avoid using bit fields for H2C command, rearrange the structure. And also patch the corresponding code for the using of this structure. No logic changes for existing chips. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-4-pkshih@realtek.com
2024-03-05wifi: rtw89: 8922a: add coexistence helpers of SW grantPing-Ke Shih
Under some circumstances, coexistence mechanism want to keep grant BT or WiFi, such as inquiry and WiFi is connecting, to ensure BT or WiFi can transmit or receive data in that period. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-3-pkshih@realtek.com
2024-03-05wifi: rtw89: mac: add coexistence helpers {cfg/get}_pltPing-Ke Shih
When hardware grant BT initially but transition to grant WiFi, the PLT (polluted) bit is set to assist coexistence mechanism to debug if grant signal is expected. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240229074514.219276-2-pkshih@realtek.com
2024-03-05wifi: cw1200: restore endian swappingJohannes Berg
The code here looks well thought-out, so it seems likely that the byte-swaps are actually needed, due to SPI bus and device behaviour. Restore the byte-swapping, in a way that doesn't result in sparse warnings. Fixes: 7ceade653429 ("wifi: cw1200: fix __le16 sparse warnings") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240228121156.62f820aa6dfb.Ia63314e4d0ed1ee76f100846d68f0722abf6b793@changeid
2024-03-05wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warnsJavier Martinez Canillas
When these failures happen, the warning and call trace is printed which is excessive. Instead, just print the error but rate limited to prevent warns to unnecessarily pollute the kernel log buffer and make the serial console practically unusable. For example, on an AM625 BeaglePlay board where accessing a SDIO WiFi chip fails with an -110 (ETIMEDOUT) error: $ dmesg | grep "sdio write\|read failed (-110)" | wc -l 39 Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240228101042.728881-1-javierm@redhat.com
2024-03-05wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byteBitterblue Smith
PCI drivers and USB drivers can both use the same function, read_efuse_byte(), and they can call it directly. rtl8192de was the only user. Tested only with the upcoming rtl8192du driver. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/4e2c968d-f25c-4a40-be97-4fdcbdde69cf@gmail.com
2024-03-05wifi: rtw88: 8821c: Fix false alarm countBitterblue Smith
total_fa_cnt is supposed to include cck_fa_cnt and ofdm_fa_cnt, not just ofdm_fa_cnt. Fixes: 960361238b86 ("rtw88: 8821c: add false alarm statistics") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/f3cb6d17-e4e4-44a7-9c9b-72aed994b5c9@gmail.com
2024-03-05wifi: rtw88: 8821c: Fix beacon loss and disconnectBitterblue Smith
Tenda U9 V2.0, which contains RTL8811CU, is practically unusable because of frequent disconnections: Feb 23 14:46:45 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:46:46 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 Feb 23 14:46:52 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED - Connection to 90:55:de:__:__:__ completed [id=0 id_str=] Feb 23 14:46:54 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:46:55 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 Feb 23 14:47:01 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED - Connection to 90:55:de:__:__:__ completed [id=0 id_str=] Feb 23 14:47:04 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS Feb 23 14:47:05 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED bssid=90:55:de:__:__:__ reason=4 locally_generated=1 This is caused by a mistake in the chip initialisation. This version of the chip requires loading an extra AGC table right after the main one, but the extra table is being loaded at the wrong time, in rtw_chip_board_info_setup(). Move the extra AGC table loading to the right place, in rtw_phy_load_tables(). The rtw_chip_board_info_setup() can only do "software" things, and rtw_phy_load_tables() can really do IO. Fixes: 5d6651fe8583 ("rtw88: 8821c: support RFE type2 wifi NIC") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/276c31d8-b9a8-4e54-a3ac-09b74657aff7@gmail.com
2024-03-05wifi: rtw88: 8821cu: Fix connection failureBitterblue Smith
Clear bit 8 of REG_SYS_STATUS1 after MAC power on. Without this, some RTL8821CU and RTL8811CU cannot connect to any network: Feb 19 13:33:11 ideapad2 kernel: wlp3s0f3u2: send auth to 90:55:de:__:__:__ (try 1/3) Feb 19 13:33:13 ideapad2 kernel: wlp3s0f3u2: send auth to 90:55:de:__:__:__ (try 2/3) Feb 19 13:33:14 ideapad2 kernel: wlp3s0f3u2: send auth to 90:55:de:__:__:__ (try 3/3) Feb 19 13:33:15 ideapad2 kernel: wlp3s0f3u2: authentication with 90:55:de:__:__:__ timed out The RTL8822CU and RTL8822BU out-of-tree drivers do this as well, so do it for all three types of chips. Tested with RTL8811CU (Tenda U9 V2.0). Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/aeeefad9-27c8-4506-a510-ef9a9a8731a4@gmail.com
2024-03-05wifi: rtw88: 8821cu: Fix firmware upload failBitterblue Smith
RTL8822CU, RTL8822BU, and RTL8821CU need an extra register write after reading and writing certain addresses. Without this, the firmware upload fails approximately more than 50% of the time. Tested with RTL8811CU (Tenda U9 V2.0) which is the same as RTL8821CU but without Bluetooth. Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/f12ed39d-28e8-4b8b-8d22-447bcf295afc@gmail.com
2024-03-05wifi: rtw88: Add missing VID/PIDs for 8811CU and 8821CUNick Morrow
Add VID/PIDs that are known to be missing for this driver. Removed /* 8811CU */ and /* 8821CU */ as they are redundant since the file is specific to those chips. Removed /* TOTOLINK A650UA v3 */ as the manufacturer. It has a REALTEK VID so it may not be specific to this adapter. Verified and tested. Cc: stable@vger.kernel.org Signed-off-by: Nick Morrow <morrownr@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/4ume7mjw63u7.XlMUvUuacW2ErhOCdqlLkw2@1EHFQ.trk.elasticemail.com
2024-03-04wifi: mac80211: pass link conf to abort_channel_switchJohannes Berg
Pass the link conf to the abort_channel_switch driver method so the driver can handle things correctly. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228095718.27f621106ddd.Iadd3d69b722ffe5934779a32a0e4e596a4e33ed4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: mac80211: add link id to ieee80211_gtk_rekey_add()Shaul Triebitz
In MLO, we need the link id in the GTK key to be given by the driver after rekeying in wowlan, so add that. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228094500.ce1bfc83a680.I43a6f8ab2804ee07116a37d5b9ec601b843464b1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: iwlwifi: Add missing MODULE_FIRMWARE() for *.pnvmTakashi Iwai
A few models require *.pnvm files while we don't declare them via MODULE_FIRMWARE(). This resulted in the breakage of WiFi on the system that relies on the information from modinfo (e.g. openSUSE installer image). This patch adds those missing MODULE_FIRMWARE() entries for *.pnvm files. type=feature ticket=none Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1207553 Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://msgid.link/20240228163837.4320-1-tiwai@suse.de [move to appropriate files] Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-10-22 07:33:21 +0000