| Age | Commit message (Collapse) | Author |
|---|
|
The CONFIG_CSD_LOCK_WAIT_DEBUG option enables debugging of hung
smp_call_function*() calls (e.g. when the target CPU gets stuck within
the callback function). Testing this option requires triggering such
hangs.
This patch adds an lkdtm test with a hung smp_call_function_single()
callback, which can be used to test CONFIG_CSD_LOCK_WAIT_DEBUG and NMI
backtraces (as CONFIG_CSD_LOCK_WAIT_DEBUG will attempt an NMI backtrace
of the hung target CPU).
On arm64 using pseudo-NMI, this looks like:
| # mount -t debugfs none /sys/kernel/debug/
| # echo SMP_CALL_LOCKUP > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry SMP_CALL_LOCKUP
| smp: csd: Detected non-responsive CSD lock (#1) on CPU#1, waiting 5000000176 ns for CPU#00 __lkdtm_SMP_CALL_LOCKUP+0x0/0x8(0x0).
| smp: csd: CSD lock (#1) handling this request.
| Sending NMI from CPU 1 to CPUs 0:
| NMI backtrace for cpu 0
| CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.9.0-rc4-00001-gfdfd281212ec #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 60401005 (nZCv daif +PAN -UAO -TCO -DIT +SSBS BTYPE=--)
| pc : __lkdtm_SMP_CALL_LOCKUP+0x0/0x8
| lr : __flush_smp_call_function_queue+0x1b0/0x290
| sp : ffff800080003f30
| pmr_save: 00000060
| x29: ffff800080003f30 x28: ffffa4ce961a4900 x27: 0000000000000000
| x26: fff000003fcfa0c0 x25: ffffa4ce961a4900 x24: ffffa4ce959aa140
| x23: ffffa4ce959aa140 x22: 0000000000000000 x21: ffff800080523c40
| x20: 0000000000000000 x19: 0000000000000000 x18: fff05b31aa323000
| x17: fff05b31aa323000 x16: ffff800080000000 x15: 0000330fc3fe6b2c
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000279
| x11: 0000000000000040 x10: fff000000302d0a8 x9 : fff000000302d0a0
| x8 : fff0000003400270 x7 : 0000000000000000 x6 : ffffa4ce9451b810
| x5 : 0000000000000000 x4 : fff05b31aa323000 x3 : ffff800080003f30
| x2 : fff05b31aa323000 x1 : ffffa4ce959aa140 x0 : 0000000000000000
| Call trace:
| __lkdtm_SMP_CALL_LOCKUP+0x0/0x8
| generic_smp_call_function_single_interrupt+0x14/0x20
| ipi_handler+0xb8/0x178
| handle_percpu_devid_irq+0x84/0x130
| generic_handle_domain_irq+0x2c/0x44
| gic_handle_irq+0x118/0x240
| call_on_irq_stack+0x24/0x4c
| do_interrupt_handler+0x80/0x84
| el1_interrupt+0x44/0xc0
| el1h_64_irq_handler+0x18/0x24
| el1h_64_irq+0x78/0x7c
| default_idle_call+0x40/0x60
| do_idle+0x23c/0x2d0
| cpu_startup_entry+0x38/0x3c
| kernel_init+0x0/0x1d8
| start_kernel+0x51c/0x608
| __primary_switched+0x80/0x88
| CPU: 1 PID: 128 Comm: sh Not tainted 6.9.0-rc4-00001-gfdfd281212ec #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x90/0xe8
| show_stack+0x18/0x24
| dump_stack_lvl+0xac/0xe8
| dump_stack+0x18/0x24
| csd_lock_wait_toolong+0x268/0x338
| smp_call_function_single+0x1dc/0x2f0
| lkdtm_SMP_CALL_LOCKUP+0xcc/0xfc
| lkdtm_do_action+0x1c/0x38
| direct_entry+0xbc/0x14c
| full_proxy_write+0x60/0xb4
| vfs_write+0xd0/0x35c
| ksys_write+0x70/0x104
| __arm64_sys_write+0x1c/0x28
| invoke_syscall+0x48/0x114
| el0_svc_common.constprop.0+0x40/0xe0
| do_el0_svc+0x1c/0x28
| el0_svc+0x38/0x108
| el0t_64_sync_handler+0x120/0x12c
| el0t_64_sync+0x1a4/0x1a8
| smp: csd: Continued non-responsive CSD lock (#1) on CPU#1, waiting 10000064272 ns for CPU#00 __lkdtm_SMP_CALL_LOCKUP+0x0/0x8(0x0).
| smp: csd: CSD lock (#1) handling this request.
| smp: csd: Continued non-responsive CSD lock (#1) on CPU#1, waiting 15000064384 ns for CPU#00 __lkdtm_SMP_CALL_LOCKUP+0x0/0x8(0x0).
| smp: csd: CSD lock (#1) handling this request.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240515120828.375585-1-mark.rutland@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Some cosmetic changes for hv.c and balloon.c (Aditya Nagesh)
- Two documentation updates (Michael Kelley)
- Suppress the invalid warning for packed member alignment (Saurabh
Sengar)
- Two hv_balloon fixes (Michael Kelley)
* tag 'hyperv-fixes-signed-20240616' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Cosmetic changes for hv.c and balloon.c
Documentation: hyperv: Improve synic and interrupt handling description
Documentation: hyperv: Update spelling and fix typo
tools: hv: suppress the invalid warning for packed member alignment
hv_balloon: Enable hot-add for memblock sizes > 128 MiB
hv_balloon: Use kernel macros to simplify open coded sequences
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 2nd set of fixes for 6.10
The usual mixed bag of new stuff and long term issues that have surfaced
as a particular driver gets more adoption.
adi,ad7266
- Add missing error check that could lead to bad data being reported.
adi,ad9739a
- Fix Kconfig to not allow COMPILE_TEST to override lack SPI support.
bosch,bme680
- Fix units for pressure value (off by factor of 10)
- Fix sign on a calibration variable read back from the device
- Avoid integer overflow in compensation functions.
- Fix an issue with read sequence that leads to stale data and bad first
reading.
freescale,fxls8962af
- Kconfig dependency fixes.
ti,hdc3020
- Fix representation of hysteresis to match ABI by being an offset from
the current event threshold, not an absolute value.
xilinx,ams
- Don't include the ams_ctrl_channels in a computed mask. This driver is
making an unusual use of scan_mask (it doesn't support buffers) and that
lead to an overflow.
* tag 'iio-fixes-for-6.10b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: chemical: bme680: Fix sensor data read operation
iio: chemical: bme680: Fix overflows in compensate() functions
iio: chemical: bme680: Fix calibration data variable
iio: chemical: bme680: Fix pressure value output
iio: humidity: hdc3020: fix hysteresis representation
iio: dac: fix ad9739a random config compile error
iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
iio: adc: ad7266: Fix variable checking bug
iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask
|
|
When MADT is parsed, print MULTIPROC_WAKEUP information:
ACPI: MP Wakeup (version[1], mailbox[0x7fffd000], reset[0x7fffe068])
This debug information will be very helpful during bringup.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-20-kirill.shutemov@linux.intel.com
|
|
"struct nouveau_job_ops" is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, "struct nouveau_job" and "struct nouveau_job_args" also
need to be adjusted to this new const qualifier.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
5570 152 0 5722 165a drivers/gpu/drm/nouveau/nouveau_exec.o
After:
=====
text data bss dec hex filename
5630 112 0 5742 166e drivers/gpu/drm/nouveau/nouveau_exec.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/860e9753d7867aa46b003bb3d0497f1b04065b24.1718381285.git.christophe.jaillet@wanadoo.fr
|
|
I'm pretty sure this optimisation is actually not a great idea,
and is racy with other things waiting for fences.
Just nuke it, there should be no need to do fence waits in a
busy CPU loop.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417054032.3145721-1-airlied@gmail.com
|
|
Currently, device (ab) reference in hardware abstraction (ah)
is not used anywhere. Also, with multiple device group abstraction,
hardware abstraction would be coupled with device group abstraction
rather than single device.
Hence, remove the ab reference from hardware abstraction.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240529060939.4156281-1-quic_hprem@quicinc.com
|
|
Whenever firmware is crashed in split-phy below WARN_ON() triggered:
WARNING: CPU: 3 PID: 82 at net/mac80211/driver-ops.c:41 drv_stop+0xac/0xbc
Modules linked in: ath12k qmi_helpers
CPU: 3 PID: 82 Comm: kworker/3:2 Tainted: G D W 6.9.0-next-20240520-00113-gd981a3784e15 #39
Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9 (DT)
Workqueue: events_freezable ieee80211_restart_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drv_stop+0xac/0xbc
lr : ieee80211_stop_device+0x54/0x64
sp : ffff8000848dbb20
x29: ffff8000848dbb20 x28: 0000000000000790 x27: ffff000014d78900
x26: ffff000014d791f8 x25: ffff000007f0d9b0 x24: 0000000000000018
x23: 0000000000000001 x22: 0000000000000000 x21: ffff000014d78e10
x20: ffff800081dc0000 x19: ffff000014d78900 x18: ffffffffffffffff
x17: ffff7fffbca84000 x16: ffff800083fe0000 x15: ffff800081dc0b48
x14: 0000000000000076 x13: 0000000000000076 x12: 0000000000000001
x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff8000848db980
x8 : ffff000000dddfc0 x7 : 0000000000000400 x6 : ffff800083b012d8
x5 : ffff800083b012d8 x4 : 0000000000000000 x3 : ffff000014d78398
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000014d78900
Call trace:
drv_stop+0xac/0xbc
ieee80211_stop_device+0x54/0x64
ieee80211_do_stop+0x5a0/0x790
ieee80211_stop+0x4c/0x178
__dev_close_many+0xb0/0x150
dev_close_many+0x88/0x130
dev_close.part.171+0x44/0x74
dev_close+0x1c/0x28
cfg80211_shutdown_all_interfaces+0x44/0xfc
ieee80211_restart_work+0xfc/0x14c
process_scheduled_works+0x18c/0x2dc
worker_thread+0x13c/0x314
kthread+0x118/0x124
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
The warning in question is from drv_stop():
if (WARN_ON(!local->started))
return;
The sequence of WARN_ON() is:
Thread 1:
-Firmware crash calls ath12k_core_reset().
-Call ieee80211_restart_hw() inside
ath12k_core_post_reconfigure_recovery() which schedules worker
for both hardware.
-Wait for completion of ab->recovery_start.
Thread 2 (worker thread):
-One hardware acquires rtnl_lock() inside ieee80211_restart_hw() and
calls ath12k_mac_wait_reconfigure() into ath12k_mac_op_start().
-Hardware is waiting for ab->reconfigure_complete but at this time
recovery_start_count value is 1 because another worker thread
(local->restart_work) is still waiting for rtnl_lock().
recovery_start_count is not equal to number of radios
(2 in split-phy). So ab->recovery_start complete does not set
due to this, thread 1 is still waiting and not able to perform
hif power down up and firmware reload.
-Wait timeout happens for ab->reconfigure_complete and comeback
to caller (ath12k_mac_op_start()) and sends WMI command to
crashed firmware and gets error.
-This returns error to drv_start() and local->started is set to false.
-Hardware calls cfg80211_shutdown_all_interfaces() after receiving error
inside ieee80211_restart_work() and goes to drv_stop(), here we trigger
WARN_ON as local->started is false.
To fix this issue call ieee80211_restart_hw() after firmware has been
reloaded. Now, each hardware can send WMI command to firmware
successfully. With this fix we don't need to wait for
ab->recovery_start completion so remove
ath12k_mac_wait_reconfigure().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 HW2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240529034405.2863150-1-quic_aarasahu@quicinc.com
|
|
In imx_rproc_addr_init() strcmp() is performed over the node after the
of_node_put() is performed over it.
Fix this error by moving of_node_put() calls.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5e4c1243071d ("remoteproc: imx_rproc: support remote cores booted before Linux Kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240612131714.12907-1-amishin@t-argos.ru
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The Microchip LAN966x outband interrupt controller (OIC) maps the
internal interrupt sources of the LAN966x device to an external
interrupt.
When the LAN966x device is used as a PCI device, the external interrupt
is routed to the PCI interrupt.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-23-herve.codina@bootlin.com
|
|
PECI clock divider is programmed on 10:8 bits of PECI Control register.
Before setting a new value, clear bits read from hardware.
Reviewed-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20240417134849.5793-1-iwona.winiarska@intel.com
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
|
|
Update peci subsystem to use the same vendor-family-model
combined definition that core x86 code uses.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20240529171920.62571-1-tony.luck@intel.com
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal driver fixes for 6.10-rc5 from Daniel Lezcano:
"- Remove the filtered mode for mt8188 as it is not supported on this
platform (Julien Panis)
- Fail in case the golden temperature is zero as that means the efuse
data is not correctly set (Julien Panis)"
* tag 'thermal-v6.10-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/mediatek/lvts_thermal: Return error in case of invalid efuse data
thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
|
|
Add job that runs igt on top of vkms.
Acked-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240614161835.55553-1-vignesh.raman@collabora.com
|
|
./cli.py --spec netlink/specs/netdev.yaml \
--dump qstats-get --json '{"scope": "queue"}'
...snip
{'ifindex': 7,
'queue-id': 62,
'queue-type': 'rx',
'rx-alloc-fail': 0,
'rx-bytes': 105965251,
'rx-packets': 179790},
{'ifindex': 7,
'queue-id': 0,
'queue-type': 'tx',
'tx-bytes': 9402665,
'tx-packets': 17551},
...snip
Also tested with the script tools/testing/selftests/drivers/net/stats.py
in several scenarios to ensure stats tallying was correct:
- on boot (default queue counts)
- adjusting queue count up or down (ethtool -L eth0 combined ...)
The tools/testing/selftests/drivers/net/stats.py brings the device up,
so to test with the device down, I did the following:
$ ip link show eth4
7: eth4: <BROADCAST,MULTICAST> mtu 9000 qdisc mq state DOWN [..snip..]
[..snip..]
$ cat /proc/net/dev | grep eth4
eth4: 235710489 434811 [..snip rx..] 2878744 21227 [..snip tx..]
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"ifindex": 7}'
[{'ifindex': 7,
'rx-alloc-fail': 0,
'rx-bytes': 235710489,
'rx-packets': 434811,
'tx-bytes': 2878744,
'tx-packets': 21227}]
Compare the values in /proc/net/dev match the output of cli for the same
device, even while the device is down.
Note that while the device is down, per queue stats output nothing
(because the device is down there are no queues):
$ ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"scope": "queue", "ifindex": 7}'
[]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mlx5 currently maps txqs to an sq via priv->txq2sq. It is useful to map
txqs to sq_stats, as well, for direct access to stats.
Add priv->txq2sq_stats and insert mappings. The mappings will be used
next to tabulate stats information.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the handling of the disabling FBC when VT-d is active wa
as part of the intel_fbc_check_plane(). As the hw is still there,
intel_fbc_sanitize should be able to handle the state properly.
v2: update the patch description (Jani Nikula)
v3: fix the return value in wa handling (Jani Nikula)
Bspec: 21664
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528114826.134958-1-vinod.govindapillai@intel.com
|
|
VMWARE_HYPERCALL alternative will not work as intended without VMware guest code
initialization.
[ bp: note that this doesn't reproduce with newer gccs so it must be
something gcc-9-specific. ]
Closes: https://lore.kernel.org/oe-kbuild-all/202406152104.FxakP1MB-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexey Makhalov <alexey.makhalov@broadcom.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240616012511.198243-1-alexey.makhalov@broadcom.com
|
|
Retimers support lane margining as well so make this available through
debugfs in the same way as we do for the USB4 ports. When this is
enabled we also expose retimers on the other side of the cable because
typically margining is implemented only on direction towards the cable.
However, for the retimers on the other side of the cable we do not allow
NVM upgrade to avoid confusing the existing userspace (the same retimer
may now appear twice with different name) and is probably not a good
idea anyway.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
In order to add lane margining support for retimers make the margining
functions take sideband target and retimer index as parameters. This
makes it possible to access both router and retimer sideband using the
same functions.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We are going to expand lane margining support for retimers too so split
out the generic margining functionality out of being specific to USB4
ports.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This makes it possible to read and write USB4 port and retimer sideband
registers through debugfs which is useful for debugging and manufacturing
purposes. We add "sb_regs" debugfs attribute under each USB4 port and
retimer that is used to access the sideband.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We need to call these from other files too so make them available
outside of usb4.c.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
It is supposed to be close with the other lane margining functions so
move it there. No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This allows the interested parties to find the Thunderbolt/USB4
debugging tools (aka tbtools) easier in case they need to look at the
information under debugfs entries.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The fwnode_iomap() function doesn't return error pointers, it returns
NULL. It's the same as of_iomap() in that way. Update the check
accordingly.
Fixes: ecc5bf868673 ("pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/840152f9-d3bb-410e-8164-4c5043e1983e@moroto.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
It's not possible to use the joiner at the same time with eDP MSO. When
a panel needs MSO, it's not optional, so MSO trumps joiner.
v3: Only change intel_dp_has_joiner(), leave debugfs alone (Ville)
Fixes: bc71194e8897 ("drm/i915/edp: enable eDP MSO during link training")
Cc: <stable@vger.kernel.org> # v5.13+
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1668
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240614142311.589089-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8b5a92ca24eb96bb71e2a55e352687487d87687f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/bcm/pinctrl-bcm4908.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08_i2c.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08_spi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/meson/pinctrl-meson.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes many meson drivers which, although they did not produce
a warning with the x86 allmodconfig configuration, may cause this
warning with ARM or ARM64 configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for Amlogic Pinctrl drivers
Link: https://lore.kernel.org/r/20240610-md-drivers-pinctrl-v1-1-68462e3d960c@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Move the comment about FSB straps to where the relevant register is
read.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8a5b6cd3db80259c30263861f1a9ff04fea2e7f0.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Instead of duplicating the CLKCFG parsing, reuse i9xx_fsb_freq() to
figure out rawclk_freq where applicable.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/21511f155f1f446e066117bc6ed3165618d7afd6.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Reuse i9xx_fsb_freq() for GT clock frequency initialization instead of
depending on rawclk_freq.
Note: If the init order was changed, we could use i915->fsb_freq
directly. However, GT clock initialization is done in
i915_driver_mmio_probe(), but intel_dram_detect() later in
i915_driver_hw_probe(), with a dependency on intel_pcode_init().
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0678d8ec9772725b47d4fa5b14e3b3a34256d5cf.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Initialize fsb frequency for more platforms to be able to use it for GT
clock and rawclk frequency initialization.
Note: There's a discrepancy between existing pnv_fsb_freq() and
i9xx_hrawclk() regarding CLKCFG interpretation. Presume all PNV is
mobile.
Default to 1333 MHz for unknown values, similar to i9xx_hrawclk().
v2:
- Add MISSING_CASE() (Ville)
- Default to the same frequency for both branches (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7cd6dbd4dafb900ac1dd12be0ec096ff1d5fc6cf.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We'll want to use fsb frequency for deriving GT clock and rawclk
frequencies in the future. Increase the accuracy by converting to
kHz. Do the same for mem freq to be aligned.
Round the frequencies ending in 666 to 667.
v2: Also handle mem_freq in gen5_rps_init() (Ville)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/17fe2544b876549f63fac0f956273f5f282081b3.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
It's a bit out of place, and only printed for VLV/CHV.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bbfec4c67a81d1d3de1f40484a80b7164e69df21.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Follow the same style in mem freq init as in fsb freq init, returning
the value instead of assigning in multiple places.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f098ccdbb0c42016d5dad81e0b089bb4babe29f0.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Split out the PNV DDR3 detection to a distinct step instead of
conflating it with mem freq detection.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c4bf9d32479ab5024e9daa37a996508f543f05e9.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
To simplify further changes, add separate functions for reading the fsb
frequency.
This ends up reading CLKCFG register twice, but it's not a big deal.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7582651aa21ac2c1472111c4e81ba8fee182f80e.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Clarify and unify the logging on not finding PNV CxSR latency
config.
Just let the i915->fsb_freq == 0 || i915->mem_freq == 0 case go through
the table instead of checking for it separately.
v2: Do not check for fsb == 0 || mem == 0 separately (Matt)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6333cb0675c531e971e829105f1ecfc4d71bdc6b.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Clarify that the function is specific to PNV, making subsequent changes
slightly easier to grasp.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7d4e3c9a4220ff84af2741e5cd7bb62d1b4f2a44.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
While muxing groups of pins at once can be convenient for large
interfaces, it can also be rigid. This is because the group is set to
all pins which support a particular function, even though not all pins
may be used. For example, the sdhci0 function may be used with a 8-bit
eMMC, 4-bit SD card, or even a 1-bit SD card. In these cases, the extra
pins may be repurposed for other uses, but this is not currently
allowed.
There is not too much point in pin "groups" when there are not actual
pin groups at the hardware level. The pins can all be muxed
individually, so there's no point in adding artificial groups on top.
Just mux the pins like the hardware allows.
To this effect, add a new group for each pin which can be muxed. These
groups are part of each function the pin can be muxed to. We treat group
selectors beyond the number of groups as "pin" groups. To set this up,
we initialize groups before functions, and then create a bitmap of used
pins for each function. These used pins are appended to the function's
list of groups.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240610223550.2449230-3-sean.anderson@linux.dev
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
It's not possible to use the joiner at the same time with eDP MSO. When
a panel needs MSO, it's not optional, so MSO trumps joiner.
v3: Only change intel_dp_has_joiner(), leave debugfs alone (Ville)
Fixes: bc71194e8897 ("drm/i915/edp: enable eDP MSO during link training")
Cc: <stable@vger.kernel.org> # v5.13+
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1668
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240614142311.589089-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
rockchip_pmx_set reset all pinmuxs in group to 0 in the case of error,
add missing bank data retrieval in that code to avoid setting mux on
unexpected pins.
Fixes: 14797189b35e ("pinctrl: rockchip: add return value to rockchip_set_mux")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-5-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
rk3328_pin_ctrl uses type of RK3288 which has a hack in
rockchip_pinctrl_suspend and rockchip_pinctrl_resume to restore GPIO6-C6
at assume, the hack is not applicable to RK3328 as GPIO6 is not even
exist in it. So use a dedicated pinctrl type to skip this hack.
Fixes: 3818e4a7678e ("pinctrl: rockchip: Add rk3328 pinctrl support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-4-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The pinmux bits for GPIO3-B1 to GPIO3-B6 pins are not explicitly
specified in RK3328 TRM, however we can get hint from pad name and its
correspinding IOMUX setting for pins in interface descriptions. The
correspinding IOMIX settings for these pins can be found in the same
row next to occurrences of following pad names in RK3328 TRM.
GPIO3-B1: IO_TSPd5m0_CIFdata5m0_GPIO3B1vccio6
GPIO3-B2: IO_TSPd6m0_CIFdata6m0_GPIO3B2vccio6
GPIO3-B3: IO_TSPd7m0_CIFdata7m0_GPIO3B3vccio6
GPIO3-B4: IO_CARDclkm0_GPIO3B4vccio6
GPIO3-B5: IO_CARDrstm0_GPIO3B5vccio6
GPIO3-B6: IO_CARDdetm0_GPIO3B6vccio6
Add pinmux data to rk3328_mux_recalced_data as mux register offset for
these pins does not follow rockchip convention.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a7678e ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-3-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The pinmux bits for GPIO2-B0 to GPIO2-B6 actually have 2 bits width,
correct the bank flag for GPIO2-B. The pinmux bits for GPIO2-B7 is
recalculated so it remain unchanged.
The pinmux bits for those pins are not explicitly specified in RK3328
TRM, however we can get hint from pad name and its correspinding IOMUX
setting for pins in interface descriptions. The correspinding IOMIX
settings for GPIO2-B0 to GPIO2-B6 can be found in the same row next to
occurrences of following pad names in RK3328 TRM.
GPIO2-B0: IO_SPIclkm0_GPIO2B0vccio5
GPIO2-B1: IO_SPItxdm0_GPIO2B1vccio5
GPIO2-B2: IO_SPIrxdm0_GPIO2B2vccio5
GPIO2-B3: IO_SPIcsn0m0_GPIO2B3vccio5
GPIO2-B4: IO_SPIcsn1m0_FLASHvol_sel_GPIO2B4vccio5
GPIO2-B5: IO_ I2C2sda_TSADCshut_GPIO2B5vccio5
GPIO2-B6: IO_ I2C2scl_GPIO2B6vccio5
This fix has been tested on NanoPi R2S for fixing confliting pinmux bits
between GPIO2-B7 with GPIO2-B5.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a7678e ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-2-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This driver calls pinctrl_register_and_init() which is not
devm_ managed, it will leads memory leak if pinctrl_enable()
fails. Replace it with devm_pinctrl_register_and_init().
And add missing of_node_put() in the error path.
Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-4-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This driver calls pinctrl_register_and_init() which is not
devm_ managed, it will leads memory leak if pinctrl_enable()
fails. Replace it with devm_pinctrl_register_and_init().
And call pcs_free_resources() if pinctrl_enable() fails.
Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-3-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In devm_pinctrl_register(), if pinctrl_enable() fails in pinctrl_register(),
the "pctldev" has not been added to dev resources, so devm_pinctrl_dev_release()
can not be called, it leads memory leak.
Introduce pinctrl_uninit_controller(), call it in the error path to free memory.
Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240606023704.3931561-2-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In create_pinctrl(), pinctrl_maps_mutex is acquired before calling
add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl()
calls pinctrl_free(). However, pinctrl_free() attempts to acquire
pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to
a potential deadlock.
This patch resolves the issue by releasing pinctrl_maps_mutex before
calling pinctrl_free(), preventing the deadlock.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: 42fed7ba44e4 ("pinctrl: move subsystem mutex to pinctrl_dev struct")
Suggested-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240604085838.3344-1-hagarhem@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use modern string_choices API instead of manually determining the
output using ternary operator.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240603181938.76047-3-wahrenst@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
