| Age | Commit message (Collapse) | Author |
|---|
|
The ACPI _ADR is a 64-bit value. We changed the definitions in commit
ca6f998cf9a2 ("ACPI: bus: change _ADR representation to 64 bits") but
some helpers still assume the value is a 32-bit value.
This patch adds a new helper to extract the full 64-bits. The existing
32-bit helper is kept for backwards-compatibility and cases where the
_ADR is known to fit in a 32-bit value.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240528192936.16180-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Device managed panel bridge wrappers are created by calling to
drm_panel_bridge_add_typed() and registering a release handler for
clean-up when the device gets unbound.
Since the memory for this bridge is also managed and linked to the panel
device, the release function should not try to free that memory.
Moreover, the call to devm_kfree() inside drm_panel_bridge_remove() will
fail in this case and emit a warning because the panel bridge resource
is no longer on the device resources list (it has been removed from
there before the call to release handlers).
Fixes: 67022227ffb1 ("drm/bridge: Add a devm_ allocator for panel bridge.")
Signed-off-by: Adam Miotk <adam.miotk@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610102739.139852-1-adam.miotk@arm.com
|
|
komeda_pipeline_get_state() may return an error-valued pointer, thus
check the pointer for negative or null value before dereferencing.
Fixes: 502932a03fce ("drm/komeda: Add the initial scaler support for CORE")
Signed-off-by: Amjad Ouled-Ameur <amjad.ouled-ameur@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610102056.40406-1-amjad.ouled-ameur@arm.com
|
|
|
|
The current arm32 architecture does not yet support the
HAVE_LD_DEAD_CODE_DATA_ELIMINATION feature. arm32 is widely used in
embedded scenarios, and enabling this feature would be beneficial for
reducing the size of the kernel image.
In order to make this work, we keep the necessary tables by annotating
them with KEEP, also it requires further changes to linker script to KEEP
some tables and wildcard compiler generated sections into the right place.
When using ld.lld for linking, KEEP is not recognized within the OVERLAY
command, and Ard proposed a concise method to solve this problem.
It boots normally with defconfig, vexpress_defconfig and tinyconfig.
The size comparison of zImage is as follows:
defconfig vexpress_defconfig tinyconfig
5137712 5138024 424192 no dce
5032560 4997824 298384 dce
2.0% 2.7% 29.7% shrink
When using smaller config file, there is a significant reduction in the
size of the zImage.
We also tested this patch on a commercially available single-board
computer, and the comparison is as follows:
a15eb_config
2161384 no dce
2092240 dce
3.2% shrink
The zImage size has been reduced by approximately 3.2%, which is 70KB on
2.1M.
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The default ndo_get_iflink() implementation returns the current ifindex
of the netdev. But the overridden nsim_get_iflink() returns 0 if the
current nsim is not linked, breaking backwards compatibility for
userspace that depend on this behaviour.
Fix the problem by returning the current ifindex if not linked to a
peer.
Fixes: 8debcf5832c3 ("netdevsim: add ndo_get_iflink() implementation")
Reported-by: Yu Watanabe <watanabe.yu@gmail.com>
Suggested-by: Yu Watanabe <watanabe.yu@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Identical configurations of planes can lead to different (and wrong)
layer -> pipe routing at HW level, depending on the order of atomic
plane changes.
For example:
- Layer 1 is configured to zpos 0 and thus uses pipe 0. No other layer
is enabled. This is a typical situation at boot.
- When a compositor takes over and layer 3 is enabled,
sun8i_ui_layer_enable() will get called with old_zpos=0 zpos=1, which
will lead to incorrect disabling of pipe 0 and enabling of pipe 1.
What happens is that sun8i_ui_layer_enable() function may disable
blender pipes even if it is no longer assigned to its layer.
To correct this, move the routing setup out of individual plane's
atomic_update into crtc's atomic_update, where it can be calculated
and updated all at once.
Remove the atomic_disable callback because it is no longer needed.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240224150604.3855534-4-megi@xff.cz
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
These will be needed later on when we move layer configuration to
crtc update.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240224150604.3855534-3-megi@xff.cz
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
These structs are identical, use a single struct to represent private
data for the DRM plane. This is a preparation for configuring layer
routing from the CRTC (mixer) instead of current approach of setting
up routing from individual layer's atomic_update callback.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240224150604.3855534-2-megi@xff.cz
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/gud/gud.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/drm_panel_orientation_quirks.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/drm_mipi_dbi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/i915/kvmgt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/udl/udl.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
For consistency this includes drivers/gpu/drm/drm_simple_kms_helper.c
since it contains a MODULE_LICENSE() even though it isn't built as a
separate module -- it is always built as part of drm_kms_helper and
drm_kms_helper_common.c already provides a MODULE_DESCRIPTION for that
module.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609-md-drivers-gpu-drm-v1-1-89e9a316d513@quicinc.com
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/bridge/lontium-lt9611.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/bridge/lontium-lt9611uxc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/bridge/sil-sii8620.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/bridge/sii9234.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609-md-drivers-gpu-drm-bridge-v1-1-b582c5c815d7@quicinc.com
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tiny/bochs.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tiny/cirrus.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tiny/gm12u320.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609-md-drivers-gpu-drm-tiny-v1-1-6905fe4ada50@quicinc.com
|
|
If possible, we should prefer xe_gt_err() over drm_err().
While at it, improve and fix some of the error messages.
Also drop unnecessary "xe_gt_sysfs.h" include.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609181931.1724-4-michal.wajdeczko@intel.com
|
|
We are converting xe_guc_pc to xe_guc_ct few times already.
Add simple helper function to avoid code duplication.
While at it, simplify other helper functions and fix order
of local variables to match the guideline.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609181931.1724-3-michal.wajdeczko@intel.com
|
|
We already have a dedicated file for GuC SLPC ABI definitions.
Move definition of the SETUP_PC_GUCRC action and related enum
to that file, rename them to match format of other new ABI
definitions and add simple kernel-doc.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609181931.1724-2-michal.wajdeczko@intel.com
|
|
Similar to the other Aya Neo devices this one features
again a portrait screen, here with a native resolution
of 1600x2560.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240310220401.895591-1-tjakobi@math.uni-bielefeld.de
|
|
When dealing with certain PLLs, it is necessary to avoid modifying them
if they have already been initialized by lower levels. For instance, in
the A1 SoC Family, the sys_pll is enabled as the parent for the cpuclk,
and it cannot be disabled during the initialization sequence. Therefore,
initialization phase must be skipped.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Link: https://lore.kernel.org/r/20240515185103.20256-2-ddrokosov@salutedevices.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM
(A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can
contain more ACLs (i.e., tc filters), but the number of masks in each
region (i.e., tc chain) is limited.
In order to mitigate the effects of the above limitation, the device
allows filters to share a single mask if their masks only differ in up
to 8 consecutive bits. For example, dst_ip/25 can be represented using
dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the
number of masks being used (and therefore does not support mask
aggregation), but can contain a limited number of filters.
The driver uses the "objagg" library to perform the mask aggregation by
passing it objects that consist of the filter's mask and whether the
filter is to be inserted into the A-TCAM or the C-TCAM since filters in
different TCAMs cannot share a mask.
The set of created objects is dependent on the insertion order of the
filters and is not necessarily optimal. Therefore, the driver will
periodically ask the library to compute a more optimal set ("hints") by
looking at all the existing objects.
When the library asks the driver whether two objects can be aggregated
the driver only compares the provided masks and ignores the A-TCAM /
C-TCAM indication. This is the right thing to do since the goal is to
move as many filters as possible to the A-TCAM. The driver also forbids
two identical masks from being aggregated since this can only happen if
one was intentionally put in the C-TCAM to avoid a conflict in the
A-TCAM.
The above can result in the following set of hints:
H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta
H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta
After getting the hints from the library the driver will start migrating
filters from one region to another while consulting the computed hints
and instructing the device to perform a lookup in both regions during
the transition.
Assuming a filter with mask X is being migrated into the A-TCAM in the
new region, the hints lookup will return H1. Since H2 is the parent of
H1, the library will try to find the object associated with it and
create it if necessary in which case another hints lookup (recursive)
will be performed. This hints lookup for {mask Y, A-TCAM} will either
return H2 or H3 since the driver passes the library an object comparison
function that ignores the A-TCAM / C-TCAM indication.
This can eventually lead to nested objects which are not supported by
the library [1].
Fix by removing the object comparison function from both the driver and
the library as the driver was the only user. That way the lookup will
only return exact matches.
I do not have a reliable reproducer that can reproduce the issue in a
timely manner, but before the fix the issue would reproduce in several
minutes and with the fix it does not reproduce in over an hour.
Note that the current usefulness of the hints is limited because they
include the C-TCAM indication and represent aggregation that cannot
actually happen. This will be addressed in net-next.
[1]
WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0
Modules linked in:
CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42
Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0
[...]
Call Trace:
<TASK>
__objagg_obj_get+0x2bb/0x580
objagg_obj_get+0xe/0x80
mlxsw_sp_acl_erp_mask_get+0xb5/0xf0
mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370
Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The key is encoded, not encrypted.
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Local Memory (aka VRAM) is only available on DGFX platforms.
We shouldn't attempt to provision VFs with LMEM or attempt to
update the LMTT on non-DGFX platforms. Add missing asserts that
would enforce that and fix release code that could crash on iGFX
due to uninitialized LMTT.
Fixes: c063cce7df3a ("drm/xe/pf: Update the LMTT when freeing VF GT config")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607153155.1592-1-michal.wajdeczko@intel.com
|
|
The header files linux/acpi.h is included twice in coresight-tmc-core.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8937
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240506011121.39179-1-yang.lee@linux.alibaba.com
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-abt-y030xx067a.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-auo-a030jtn01.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-innolux-ej030na.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-newvision-nv3052c.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-novatek-nt39016.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/panel/panel-orisetech-ota5601a.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609-md-drivers-gpu-drm-panel-v1-1-04b2a1ae7412@quicinc.com
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_kunit_helpers.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_buddy_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_cmdline_parser_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_connector_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_damage_helper_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_dp_mst_helper_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_exec_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_format_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_framebuffer_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_gem_shmem_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_managed_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_mm_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_modes_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_plane_helper_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_probe_helper_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/tests/drm_rect_test.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606-md-drivers-gpu-drm-tests-v1-1-228ca6213969@quicinc.com
|
|
Report the average QP value of the current encoded frame via the
V4L2_CID_MPEG_VIDEO_AVERAGE_QP control, the value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is no need to add a lock in s_ctrl callback, it has been
synchronized by the ctrl_handler's lock, otherwise it may led to
a deadlock if the driver calls v4l2_ctrl_s_ctrl().
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add a control V4L2_CID_MPEG_VIDEO_AVERAGE_QP to report the average QP
value of the current encoded frame. The value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As talked about in commit 14d3ae2efeed ("ARM: 8507/1: dma-mapping: Use
DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize alloc"), it doesn't
really make sense to try to allocate contiguous chunks of memory for
video encoding/decoding. Let's switch the Mediatek vcodec driver to
pass DMA_ATTR_ALLOC_SINGLE_PAGES and take some of the stress off the
memory subsystem.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Both 'bs_dma' and 'dma_addr' are integers. No need to convert the
type from dma_addr_t to uint64_t again.
Fixes: d353c3c34af0 ("media: mediatek: vcodec: support 36 bits physical address")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi
is valid for future use.
Fixes: 590577a4e525 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The supported decoder commands are different for stateless and
stateful architectures. Add stateless decoder commands to fix
the v4l2-compliance test error below.
Codec ioctls:
VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
VIDIOC_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
fail: v4l2-test-codecs.cpp(126): ret
test VIDIOC_(TRY_)DECODER_CMD: FAIL
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The driver core allows for struct class to be in read-only memory. Move
the dca_class structure to be declared at build time placing it into
read-only memory, instead of having to be dynamically allocated at boot
time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20240412151726.189030-1-ivan.orlov0322@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Linux 6.10-rc3
This is needed for the ipu6 and mei fixes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The duplicated EDID is never freed. Fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Apply the SID bits to the correct offset in the Bank value. Do this in
the temporary value so they don't need to be masked off later.
Fixes: 87a612375307 ("RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240607-mi300-dram-xl-fix-v1-1-2f11547a178c@amd.com
|
|
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.
This fixes the following issue observed on Trats2 board since commit
13d5b040363c ("drm/exynos: do not return negative values from .get_modes()"):
[drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)
exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b)
exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state
panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
------------[ cut here ]------------
WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
[CRTC:70:crtc-1] vblank wait timed out
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from __warn+0x7c/0x1c4
__warn from warn_slowpath_fmt+0x11c/0x1a8
warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
commit_tail from drm_atomic_helper_commit+0x168/0x190
drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0
drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c
drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc
drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40
drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4
__drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c
drm_fb_helper_set_par from fbcon_init+0x3d8/0x550
fbcon_init from visual_init+0xc0/0x108
visual_init from do_bind_con_driver+0x1b8/0x3a4
do_bind_con_driver from do_take_over_console+0x140/0x1ec
do_take_over_console from do_fbcon_takeover+0x70/0xd0
do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac
fbcon_fb_registered from register_framebuffer+0x190/0x21c
register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574
__drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0
exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94
drm_client_register from exynos_drm_bind+0x160/0x190
exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8
try_to_bring_up_aggregate_device from __component_add+0xb0/0x170
__component_add from mixer_probe+0x74/0xcc
mixer_probe from platform_probe+0x5c/0xb8
platform_probe from really_probe+0xe0/0x3d8
really_probe from __driver_probe_device+0x9c/0x1e4
__driver_probe_device from driver_probe_device+0x30/0xc0
driver_probe_device from __device_attach_driver+0xa8/0x120
__device_attach_driver from bus_for_each_drv+0x80/0xcc
bus_for_each_drv from __device_attach+0xac/0x1fc
__device_attach from bus_probe_device+0x8c/0x90
bus_probe_device from deferred_probe_work_func+0x98/0xe0
deferred_probe_work_func from process_one_work+0x240/0x6d0
process_one_work from worker_thread+0x1a0/0x3f4
worker_thread from kthread+0x104/0x138
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf0895fb0 to 0xf0895ff8)
...
irq event stamp: 82357
hardirqs last enabled at (82363): [<c01a96e8>] vprintk_emit+0x308/0x33c
hardirqs last disabled at (82368): [<c01a969c>] vprintk_emit+0x2bc/0x33c
softirqs last enabled at (81614): [<c0101644>] __do_softirq+0x320/0x500
softirqs last disabled at (81609): [<c012dfe0>] __irq_exit_rcu+0x130/0x184
---[ end trace 0000000000000000 ]---
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CRTC:70:crtc-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CONNECTOR:74:HDMI-A-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [PLANE:56:plane-5] commit wait timed out
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
Cc: stable@vger.kernel.org
Fixes: 13d5b040363c ("drm/exynos: do not return negative values from .get_modes()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Both the AMD ATL and the FMPM driver define INVALID_SPA. Include the
definition from the ATL internal.h header in the FMPM driver.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240606203313.51197-7-john.allen@amd.com
|
|
Unlike with previous Data Fabric versions, with Data Fabric 4.5
non-power-of-2 denormalization, there are bits of the system physical
address that can't be fully reconstructed from the normalized address.
To determine the proper combination of missing system physical address
bits, iterate through each possible combination of these bits, normalize
the resulting system physical address, and compare to the original
address that is being translated. If the addresses match, then the
correct permutation of bits has been found.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20240606203313.51197-6-john.allen@amd.com
|
|
Validate address maps at the time the information is gathered as the
address map will not change during translation.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20240606203313.51197-5-john.allen@amd.com
|
|
The ret_addr field in struct addr_ctx contains the intermediate value of
the returned address as it passes through multiple steps in the
translation process. Currently, adding the DRAM base and legacy hole
is only done once, so it operates directly on the intermediate value.
However, for DF 4.5 non-power-of-2 denormalization, adding and removing
the DRAM base and legacy hole needs to be done for multiple temporary
address values. During this process, the intermediate value should not be
lost so the ret_addr value can't be reused.
Update the existing 'add' helper to operate on an arbitrary address
and introduce a new 'remove' helper to do the inverse operations.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20240606203313.51197-4-john.allen@amd.com
|
|
Read DRAM hole base when constructing the address map as the value will
not change during run time.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20240606203313.51197-3-john.allen@amd.com
|
|
Prefix all AMD ATL pr_* statements with "amd_atl:".
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240606203313.51197-2-john.allen@amd.com
|
|
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/input/touchscreen/cyttsp_i2c_common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/input/misc/soc_button_array.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/input/matrix-keymap.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/input/vivaldi-fmap.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/input/tests/input_test.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes drivers/input/misc/sgi_btns.c which, although it did not
produce a warning with the x86 allmodconfig configuration, may cause
this warning with other configurations when either CONFIG_SGI_IP22 or
CONFIG_SGI_IP32 is enabled.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240609-md-drivers-input-v1-1-a2f394e0f9d8@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter).
At the same time refactor the code to not use assignment in "if"
conditions.
This patch has no effect on runtime behavior.
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB7237FEA55FAC8A9453F2DA6F8BC42@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter).
The refactoring is mostly trivial except for "usbtouchscreen.c"
file. Here, in the "mtouch_alloc" and "nexio_alloc" functions,
it is necessary to use a variable with a predefined type instead
of the "usbtouch->priv" variable (void * type). This way, the
"sizeof" operator can now know the correct size. Moreover, we
need to set the "usbtouch->priv" pointer after the memory
allocation since now the "kmalloc" return value is not assigned
directly.
This patch has no effect on runtime behavior.
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB723708364CC0DF2EAAFEE5968BC42@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently the k3_udma_glue_rx_get_irq() function returns either negative
error codes or zero on error. Generally, in the kernel, zero means
success so this be confusing and has caused bugs in the past. Also the
"tx" version of this function only returns negative error codes. Let's
clean this "rx" function so both functions match.
This patch has no effect on runtime.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Convert PCI core error codes to proper error numbers since latter get
propagated all the way up to the module loading functions
* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Convert PCIBIOS_* return codes to errnos
EDAC/amd64: Convert PCIBIOS_* return codes to errnos
|
|
Commit 070246e4674b ("net: stmmac: Fix for mismatched host/device DMA
address width") added support in the stmmac driver for platform drivers
to indicate the host DMA width, but left it up to authors of the
specific platforms to indicate if their width differed from the addr64
register read from the MAC itself.
Qualcomm's EMAC4 integration supports only up to 36 bit width (as
opposed to the addr64 register indicating 40 bit width). Let's indicate
that in the platform driver to avoid a scenario where the driver will
allocate descriptors of size that is supported by the CPU which in our
case is 36 bit, but as the addr64 register is still capable of 40 bits
the device will use two descriptors as one address.
Fixes: 8c4d92e82d50 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms")
Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A read operation is happening as follows:
a) Set sensor to forced mode
b) Sensor measures values and update data registers and sleeps again
c) Read data registers
In the current implementation the read operation happens immediately
after the sensor is set to forced mode so the sensor does not have
the time to update properly the registers. This leads to the following
2 problems:
1) The first ever value which is read by the register is always wrong
2) Every read operation, puts the register into forced mode and reads
the data that were calculated in the previous conversion.
This behaviour was tested in 2 ways:
1) The internal meas_status_0 register was read before and after every
read operation in order to verify that the data were ready even before
the register was set to forced mode and also to check that after the
forced mode was set the new data were not yet ready.
2) Physically changing the temperature and measuring the temperature
This commit adds the waiting time in between the set of the forced mode
and the read of the data. The function is taken from the Bosch BME68x
Sensor API [1].
[1]: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L490
Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://lore.kernel.org/r/20240606212313.207550-5-vassilisamir@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
