summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-08-04i40e: Add additional info to PHY type errorLukasz Cieplicki
commit dc614c46178b0b89bde86ac54fc687a28580d2b7 upstream. In case of PHY type error occurs, the message was too generic. Add additional info to PHY type error indicating that it can be wrong cable connected. Fixes: 124ed15bf126 ("i40e: Add dual speed module support") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: hi311x: fix a signedness bug in hi3110_cmd()Dan Carpenter
[ Upstream commit f6b3c7848e66e9046c8a79a5b88fd03461cc252b ] The hi3110_cmd() is supposed to return zero on success and negative error codes on failure, but it was accidentally declared as a u8 when it needs to be an int type. Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver") Link: https://lore.kernel.org/r/20210729141246.GA1267@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04sis900: Fix missing pci_disable_device() in probe and removeWang Hai
[ Upstream commit 89fb62fde3b226f99b7015280cf132e2a7438edf ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04tulip: windbond-840: Fix missing pci_disable_device() in probe and removeWang Hai
[ Upstream commit 76a16be07b209a3f507c72abe823bd3af1c8661a ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04net/mlx5: Fix flow table chainingMaor Gottlieb
[ Upstream commit 8b54874ef1617185048029a3083d510569e93751 ] Fix a bug when flow table is created in priority that already has other flow tables as shown in the below diagram. If the new flow table (FT-B) has the lowest level in the priority, we need to connect the flow tables from the previous priority (p0) to this new table. In addition when this flow table is destroyed (FT-B), we need to connect the flow tables from the previous priority (p0) to the next level flow table (FT-C) in the same priority of the destroyed table (if exists). --------- |root_ns| --------- | -------------------------------- | | | ---------- ---------- --------- |p(prio)-x| | p-y | | p-n | ---------- ---------- --------- | | ---------------- ------------------ |ns(e.g bypass)| |ns(e.g. kernel) | ---------------- ------------------ | | | ------- ------ ---- | p0 | | p1 | |p2| ------- ------ ---- | | \ -------- ------- ------ | FT-A | |FT-B | |FT-C| -------- ------- ------ Fixes: f90edfd279f3 ("net/mlx5_core: Connect flow tables") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04mlx4: Fix missing error code in mlx4_load_one()Jiapeng Chong
[ Upstream commit 7e4960b3d66d7248b23de3251118147812b42da2 ] The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'. Eliminate the follow smatch warning: drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 7ae0e400cd93 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs") Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Fix log TC creation failure when max num of queues is exceededJedrzej Jagielski
[ Upstream commit ea52faae1d17cd3048681d86d2e8641f44de484d ] Fix missing failed message if driver does not have enough queues to complete TC command. Without this fix no message is displayed in dmesg. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Fix logic of disabling queuesArkadiusz Kubalewski
[ Upstream commit 65662a8dcdd01342b71ee44234bcfd0162e195af ] Correct the message flow between driver and firmware when disabling queues. Previously in case of PF reset (due to required reinit after reconfig), the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up occasionally. The error was not a real issue of hardware or firmware, it was caused by wrong sequence of messages invoked by the driver. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04nfc: nfcsim: fix use after free during module unloadKrzysztof Kozlowski
commit 5e7b30d24a5b8cb691c173b45b50e3ca0191be19 upstream. There is a use after free memory corruption during module exit: - nfcsim_exit() - nfcsim_device_free(dev0) - nfc_digital_unregister_device() This iterates over command queue and frees all commands, - dev->up = false - nfcsim_link_shutdown() - nfcsim_link_recv_wake() This wakes the sleeping thread nfcsim_link_recv_skb(). - nfcsim_link_recv_skb() Wake from wait_event_interruptible_timeout(), call directly the deb->cb callback even though (dev->up == false), - digital_send_cmd_complete() Dereference of "struct digital_cmd" cmd which was freed earlier by nfc_digital_unregister_device(). This causes memory corruption shortly after (with unrelated stack trace): nfc nfc0: NFC: nfcsim_recv_wq: Device is down llcp: nfc_llcp_recv: err -19 nfc nfc1: NFC: nfcsim_recv_wq: Device is down BUG: unable to handle page fault for address: ffffffffffffffed Call Trace: fsnotify+0x54b/0x5c0 __fsnotify_parent+0x1fe/0x300 ? vfs_write+0x27c/0x390 vfs_write+0x27c/0x390 ksys_write+0x63/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae KASAN report: BUG: KASAN: use-after-free in digital_send_cmd_complete+0x16/0x50 Write of size 8 at addr ffff88800a05f720 by task kworker/0:2/71 Workqueue: events nfcsim_recv_wq [nfcsim] Call Trace:  dump_stack_lvl+0x45/0x59  print_address_description.constprop.0+0x21/0x140  ? digital_send_cmd_complete+0x16/0x50  ? digital_send_cmd_complete+0x16/0x50  kasan_report.cold+0x7f/0x11b  ? digital_send_cmd_complete+0x16/0x50  ? digital_dep_link_down+0x60/0x60  digital_send_cmd_complete+0x16/0x50  nfcsim_recv_wq+0x38f/0x3d5 [nfcsim]  ? nfcsim_in_send_cmd+0x4a/0x4a [nfcsim]  ? lock_is_held_type+0x98/0x110  ? finish_wait+0x110/0x110  ? rcu_read_lock_sched_held+0x9c/0xd0  ? rcu_read_lock_bh_held+0xb0/0xb0  ? lockdep_hardirqs_on_prepare+0x12e/0x1f0 This flow of calling digital_send_cmd_complete() callback on driver exit is specific to nfcsim which implements reading and sending work queues. Since the NFC digital device was unregistered, the callback should not be called. Fixes: 204bddcb508f ("NFC: nfcsim: Make use of the Digital layer") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04NIU: fix incorrect error return, missed in previous revertPaul Jakma
commit 15bbf8bb4d4ab87108ecf5f4155ec8ffa3c141d6 upstream. Commit 7930742d6, reverting 26fd962, missed out on reverting an incorrect change to a return value. The niu_pci_vpd_scan_props(..) == 1 case appears to be a normal path - treating it as an error and return -EINVAL was breaking VPD_SCAN and causing the driver to fail to load. Fix, so my Neptune card works again. Cc: Kangjie Lu <kjlu@umn.edu> Cc: Shannon Nelson <shannon.lee.nelson@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Fixes: 7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"') Signed-off-by: Paul Jakma <paul@jakma.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: esd_usb2: fix memory leakPavel Skripkin
commit 928150fad41ba16df7fcc9f7f945747d0f56cbb6 upstream. In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: ems_usb: fix memory leakPavel Skripkin
commit 9969e3c5f40c166e3396acc36c34f9de502929f6 upstream. In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see ems_usb_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: usb_8dev: fix memory leakPavel Skripkin
commit 0e865f0c31928d6a313269ef624907eec55287c4 upstream. In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see usb_8dev_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: mcba_usb_start(): add missing urb->transfer_dma initializationPavel Skripkin
commit fc43fb69a7af92839551f99c1a96a37b77b3ae7a upstream. Yasushi reported, that his Microchip CAN Analyzer stopped working since commit 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb"). The problem was in missing urb->transfer_dma initialization. In my previous patch to this driver I refactored mcba_usb_start() code to avoid leaking usb coherent buffers. To archive it, I passed local stack variable to usb_alloc_coherent() and then saved it to private array to correctly free all coherent buffers on ->close() call. But I forgot to initialize urb->transfer_dma with variable passed to usb_alloc_coherent(). All of this was causing device to not work, since dma addr 0 is not valid and following log can be found on bug report page, which points exactly to problem described above. | DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set Fixes: 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850 Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Reported-by: Yasushi SHOJI <yasushi.shoji@gmail.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Tested-by: Yasushi SHOJI <yashi@spacecubics.com> [mkl: fixed typos in commit message - thanks Yasushi SHOJI] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04virtio_net: Do not pull payload in skb->headEric Dumazet
commit 0f6925b3e8da0dbbb52447ca8a8b42b371aac7db upstream. Xuan Zhuo reported that commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") brought a ~10% performance drop. The reason for the performance drop was that GRO was forced to chain sk_buff (using skb_shinfo(skb)->frag_list), which uses more memory but also cause packet consumers to go over a lot of overhead handling all the tiny skbs. It turns out that virtio_net page_to_skb() has a wrong strategy : It allocates skbs with GOOD_COPY_LEN (128) bytes in skb->head, then copies 128 bytes from the page, before feeding the packet to GRO stack. This was suboptimal before commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") because GRO was using 2 frags per MSS, meaning we were not packing MSS with 100% efficiency. Fix is to pull only the ethernet header in page_to_skb() Then, we change virtio_net_hdr_to_skb() to pull the missing headers, instead of assuming they were already pulled by callers. This fixes the performance regression, but could also allow virtio_net to accept packets with more than 128bytes of headers. Many thanks to Xuan Zhuo for his report, and his tests/help. Fixes: 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://www.spinics.net/lists/netdev/msg731397.html Co-Developed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtualization@lists.linux-foundation.org Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-31firmware: arm_scmi: Fix range check for the maximum number of pending messagesCristian Marussi
[ Upstream commit bdb8742dc6f7c599c3d61959234fe4c23638727b ] SCMI message headers carry a sequence number and such field is sized to allow for MSG_TOKEN_MAX distinct numbers; moreover zero is not really an acceptable maximum number of pending in-flight messages. Fix accordingly the checks performed on the value exported by transports in scmi_desc.max_msg Link: https://lore.kernel.org/r/20210712141833.6628-3-cristian.marussi@arm.com Reported-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> [sudeep.holla: updated the patch title and error message] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflowSudeep Holla
[ Upstream commit 7a691f16ccad05d770f813d9c4b4337a30c6d63f ] The scmi_linux_errmap buffer access index is supposed to depend on the array size to prevent element out of bounds access. It uses SCMI_ERR_MAX to check bounds but that can mismatch with the array size. It also changes the success into -EIO though scmi_linux_errmap is never used in case of success, it is expected to work for success case too. It is slightly confusing code as the negative of the error code is used as index to the buffer. Fix it by negating it at the start and make it more readable. Link: https://lore.kernel.org/r/20210707135028.1869642-1-sudeep.holla@arm.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-31iio: dac: ds4422/ds4424 drop of_node checkRuslan Babayev
commit a2d2010d95cd7ffe3773aba6eaee35d54e332c25 upstream. The driver doesn't actually rely on any DT properties. Removing this check makes it usable on ACPI based platforms. Signed-off-by: Ruslan Babayev <ruslan@babayev.com> Cc: xe-linux-external@cisco.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28xhci: add xhci_get_virt_ep() helperMathias Nyman
[commit b1adc42d440df3233255e313a45ab7e9b2b74096 upstream] In several event handlers we need to find the right endpoint structure from slot_id and ep_index in the event. Add a helper for this, check that slot_id and ep_index are valid. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Carsten Schmid <carsten_schmid@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28spi: spi-fsl-dspi: Fix a resource leak in an error handling pathChristophe JAILLET
commit 680ec0549a055eb464dce6ffb4bfb736ef87236e upstream 'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the error handling path of the probe function, as already done in the remove function Fixes: 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/d51caaac747277a1099ba8dea07acd85435b857e.1620587472.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28PCI: Mark AMD Navi14 GPU ATS as brokenEvan Quan
commit e8946a53e2a698c148b3b3ed732f43c7747fbeb6 upstream Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00. Further debugging shows broken ATS is related. Disable ATS on this part. Similar issues on other devices: a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") Suggested-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28iio: accel: bma180: Fix BMA25x bandwidth register valuesStephan Gerhold
commit 8090d67421ddab0ae932abab5a60200598bf0bbb upstream According to the BMA253 datasheet [1] and BMA250 datasheet [2] the bandwidth value for BMA25x should be set as 01xxx: "Settings 00xxx result in a bandwidth of 7.81 Hz; [...] It is recommended [...] to use the range from ´01000b´ to ´01111b´ only in order to be compatible with future products." However, at the moment the drivers sets bandwidth values from 0 to 6, which is not recommended and always results into 7.81 Hz bandwidth according to the datasheet. Fix this by introducing a bw_offset = 8 = 01000b for BMA25x, so the additional bit is always set for BMA25x. [1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf [2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf Cc: Peter Meerwald <pmeerw@pmeerw.net> Fixes: 2017cff24cc0 ("iio:bma180: Add BMA250 chip support") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210526094408.34298-2-stephan@gerhold.net Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28iio: accel: bma180: Use explicit member assignmentLinus Walleij
commit 9436abc40139503a7cea22a96437697d048f31c0 upstream This uses the C99 explicit .member assignment for the variant data in struct bma180_part_info. This makes it easier to understand and add new variants. Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clearDoug Berger
commit 5a3c680aa2c12c90c44af383fe6882a39875ab81 upstream. Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection logic of the internal PHY to prevent the system from sleeping. Some internal PHYs will report that energy is detected when the network interface is closed which can prevent the system from going to sleep if WoL is enabled when the interface is brought down. Since the driver does not support waking the system on this logic, this commit clears the bit whenever the internal PHY is powered up and the other logic for manipulating the bit is removed since it serves no useful function. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28net: dsa: mv88e6xxx: use correct .stats_set_histogram() on TopazMarek Behún
commit 11527f3c4725640e6c40a2b7654e303f45e82a6c upstream. Commit 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") introduced wrong .stats_set_histogram() method for Topaz family. The Peridot method should be used instead. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28drm: Return -ENOTTY for non-drm ioctlsCharles Baylis
commit 3abab27c322e0f2acf981595aa8040c9164dc9fb upstream. drm: Return -ENOTTY for non-drm ioctls Return -ENOTTY from drm_ioctl() when userspace passes in a cmd number which doesn't relate to the drm subsystem. Glibc uses the TCGETS ioctl to implement isatty(), and without this change isatty() returns it incorrectly returns true for drm devices. To test run this command: $ if [ -t 0 ]; then echo is a tty; fi < /dev/dri/card0 which shows "is a tty" without this patch. This may also modify memory which the userspace application is not expecting. Signed-off-by: Charles Baylis <cb-kernel@fishzet.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YPG3IBlzaMhfPqCr@stando.fishzet.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28ixgbe: Fix packet corruption due to missing DMA syncMarkus Boehme
commit 09cfae9f13d51700b0fecf591dcd658fc5375428 upstream. When receiving a packet with multiple fragments, hardware may still touch the first fragment until the entire packet has been received. The driver therefore keeps the first fragment mapped for DMA until end of packet has been asserted, and delays its dma_sync call until then. The driver tries to fit multiple receive buffers on one page. When using 3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned off/build_skb is being used) on an architecture with 4K pages, the driver allocates an order 1 compound page and uses one page per receive buffer. To determine the correct offset for a delayed DMA sync of the first fragment of a multi-fragment packet, the driver then cannot just use PAGE_MASK on the DMA address but has to construct a mask based on the actual size of the backing page. Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration will always sync the first page of a compound page. With the SWIOTLB enabled this can lead to corrupted packets (zeroed out first fragment, re-used garbage from another packet) and various consequences, such as slow/stalling data transfers and connection resets. For example, testing on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled (e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle out without this patch. Cc: stable@vger.kernel.org Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path") Signed-off-by: Markus Boehme <markubo@amazon.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()Gustavo A. R. Silva
commit 8d4abca95ecc82fc8c41912fa0085281f19cc29f upstream. Fix an 11-year old bug in ngene_command_config_free_buf() while addressing the following warnings caught with -Warray-bounds: arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] The problem is that the original code is trying to copy 6 bytes of data into a one-byte size member _config_ of the wrong structue FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &com.cmd.ConfigureBuffers.config. It seems that the right structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains 6 more members apart from the header _hdr_. Also, the name of the function ngene_command_config_free_buf() suggests that the actual intention is to ConfigureFreeBuffers, instead of ConfigureBuffers (which takes place in the function ngene_command_config_buf(), above). Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as the destination address, instead of &com.cmd.ConfigureBuffers.config, when calling memcpy(). This also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Fixes: dae52d009fc9 ("V4L/DVB: ngene: Initial check-in") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/linux-hardening/20210420001631.GA45456@embeddedor/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.Minas Harutyunyan
commit d53dc38857f6dbefabd9eecfcbf67b6eac9a1ef4 upstream. Sending zero length packet in DDMA mode perform by DMA descriptor by setting SP (short packet) flag. For DDMA in function dwc2_hsotg_complete_in() does not need to send zlp. Tested by USBCV MSC tests. Fixes: f71b5e2533de ("usb: dwc2: gadget: fix zero length packet transfers") Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stickJohn Keeping
commit d6a206e60124a9759dd7f6dfb86b0e1d3b1df82e upstream. Add the USB serial device ID for the CEL ZigBee EM3588 radio stick. Signed-off-by: John Keeping <john@metanate.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28USB: serial: cp210x: fix comments for GE CS1000Ian Ray
commit e9db418d4b828dd049caaf5ed65dc86f93bb1a0c upstream. Fix comments for GE CS1000 CP210x USB ID assignments. Fixes: 42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs") Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28USB: serial: option: add support for u-blox LARA-R6 familyMarco De Marco
commit 94b619a07655805a1622484967754f5848640456 upstream. The patch is meant to support LARA-R6 Cat 1 module family. Module USB ID: Vendor ID: 0x05c6 Product ID: 0x90fA Interface layout: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: QMI wwan (not available in all versions) Signed-off-by: Marco De Marco <marco.demarco@posteo.net> Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()Yoshihiro Shimoda
commit 5719df243e118fb343725e8b2afb1637e1af1373 upstream. This driver has a potential issue which this driver is possible to cause superfluous irqs after usb_pkt_pop() is called. So, after the commit 3af32605289e ("usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()") had been applied, we could observe the following error happened when we used g_audio. renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22 To fix the issue, disable the tx or rx interrupt in usb_pkt_pop(). Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28usb: max-3421: Prevent corruption of freed memoryMark Tomlinson
commit b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream. The MAX-3421 USB driver remembers the state of the USB toggles for a device/endpoint. To save SPI writes, this was only done when a new device/endpoint was being used. Unfortunately, if the old device was removed, this would cause writes to freed memory. To fix this, a simpler scheme is used. The toggles are read from hardware when a URB is completed, and the toggles are always written to hardware when any URB transaction is started. This will cause a few more SPI transactions, but no causes kernel panics. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UASJulian Sikorski
commit 6abf2fe6b4bf6e5256b80c5817908151d2d33e9f upstream. LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates errors like: [ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN [ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00 [ 1151.588594] scsi host14: uas_eh_device_reset_handler start [ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1151.741398] scsi host14: uas_eh_device_reset_handler success [ 1181.785534] scsi host14: uas_eh_device_reset_handler start Signed-off-by: Julian Sikorski <belegdol+github@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28usb: hub: Fix link power management max exit latency (MEL) calculationsMathias Nyman
commit 1bf2761c837571a66ec290fb66c90413821ffda2 upstream. Maximum Exit Latency (MEL) value is used by host to know how much in advance it needs to start waking up a U1/U2 suspended link in order to service a periodic transfer in time. Current MEL calculation only includes the time to wake up the path from U1/U2 to U0. This is called tMEL1 in USB 3.1 section C 1.5.2 Total MEL = tMEL1 + tMEL2 +tMEL3 + tMEL4 which should additinally include: - tMEL2 which is the time it takes for PING message to reach device - tMEL3 time for device to process the PING and submit a PING_RESPONSE - tMEL4 time for PING_RESPONSE to traverse back upstream to host. Add the missing tMEL2, tMEL3 and tMEL4 to MEL calculation. Cc: <stable@kernel.org> # v3.5 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150122.1995966-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28usb: hub: Disable USB 3 device initiated lpm if exit latency is too highMathias Nyman
commit 1b7f56fbc7a1b66967b6114d1b5f5a257c3abae6 upstream. The device initiated link power management U1/U2 states should not be enabled in case the system exit latency plus one bus interval (125us) is greater than the shortest service interval of any periodic endpoint. This is the case for both U1 and U2 sytstem exit latencies and link states. See USB 3.2 section 9.4.9 "Set Feature" for more details Note, before this patch the host and device initiated U1/U2 lpm states were both enabled with lpm. After this patch it's possible to end up with only host inititated U1/U2 lpm in case the exit latencies won't allow device initiated lpm. If this case we still want to set the udev->usb3_lpm_ux_enabled flag so that sysfs users can see the link may go to U1/U2. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28xhci: Fix lost USB 2 remote wakeMathias Nyman
commit 72f68bf5c756f5ce1139b31daae2684501383ad5 upstream. There's a small window where a USB 2 remote wake may be left unhandled due to a race between hub thread and xhci port event interrupt handler. When the resume event is detected in the xhci interrupt handler it kicks the hub timer, which should move the port from resume to U0 once resume has been signalled for long enough. To keep the hub "thread" running we set a bus_state->resuming_ports flag. This flag makes sure hub timer function kicks itself. checking this flag was not properly protected by the spinlock. Flag was copied to a local variable before lock was taken. The local variable was then checked later with spinlock held. If interrupt is handled right after copying the flag to the local variable we end up stopping the hub thread before it can handle the USB 2 resume. CPU0 CPU1 (hub thread) (xhci event handler) xhci_hub_status_data() status = bus_state->resuming_ports; <Interrupt> handle_port_status() spin_lock() bus_state->resuming_ports = 1 set_flag(HCD_FLAG_POLL_RH) spin_unlock() spin_lock() if (!status) clear_flag(HCD_FLAG_POLL_RH) spin_unlock() Fix this by taking the lock a bit earlier so that it covers the resuming_ports flag copy in the hub thread Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28drm/panel: raspberrypi-touchscreen: Prevent double-freeMaxime Ripard
[ Upstream commit 7bbcb919e32d776ca8ddce08abb391ab92eef6a9 ] The mipi_dsi_device allocated by mipi_dsi_device_register_full() is already free'd on release. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210720134525.563936-9-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"Vincent Palatin
[ Upstream commit f3a1a937f7b240be623d989c8553a6d01465d04f ] This reverts commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd. While the patch was working as stated,ie preventing the L850-GL LTE modem from crashing on some U3 wake-ups due to a race condition between the host wake-up and the modem-side wake-up, when using the MBIM interface, this would force disabling the USB runtime PM on the device. The increased power consumption is significant for LTE laptops, and given that with decently recent modem firmwares, when the modem hits the bug, it automatically recovers (ie it drops from the bus, but automatically re-enumerates after less than half a second, rather than being stuck until a power cycle as it was doing with ancient firmware), for most people, the trade-off now seems in favor of re-enabling it by default. For people with access to the platform code, the bug can also be worked-around successfully by changing the USB3 LFPM polling off-time for the XHCI controller in the BIOS code. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org Fixes: 0bd860493f81 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTINGZhihao Cheng
[ Upstream commit 7764656b108cd308c39e9a8554353b8f9ca232a3 ] Followling process: nvme_probe nvme_reset_ctrl nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING) queue_work(nvme_reset_wq, &ctrl->reset_work) --------------> nvme_remove nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING) worker_thread process_one_work nvme_reset_work WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING) , which will trigger WARN_ON in nvme_reset_work(): [ 127.534298] WARNING: CPU: 0 PID: 139 at drivers/nvme/host/pci.c:2594 [ 127.536161] CPU: 0 PID: 139 Comm: kworker/u8:7 Not tainted 5.13.0 [ 127.552518] Call Trace: [ 127.552840] ? kvm_sched_clock_read+0x25/0x40 [ 127.553936] ? native_send_call_func_single_ipi+0x1c/0x30 [ 127.555117] ? send_call_function_single_ipi+0x9b/0x130 [ 127.556263] ? __smp_call_single_queue+0x48/0x60 [ 127.557278] ? ttwu_queue_wakelist+0xfa/0x1c0 [ 127.558231] ? try_to_wake_up+0x265/0x9d0 [ 127.559120] ? ext4_end_io_rsv_work+0x160/0x290 [ 127.560118] process_one_work+0x28c/0x640 [ 127.561002] worker_thread+0x39a/0x700 [ 127.561833] ? rescuer_thread+0x580/0x580 [ 127.562714] kthread+0x18c/0x1e0 [ 127.563444] ? set_kthread_struct+0x70/0x70 [ 127.564347] ret_from_fork+0x1f/0x30 The preceding problem can be easily reproduced by executing following script (based on blktests suite): test() { pdev="$(_get_pci_dev_from_blkdev)" sysfs="/sys/bus/pci/devices/${pdev}" for ((i = 0; i < 10; i++)); do echo 1 > "$sysfs/remove" echo 1 > /sys/bus/pci/rescan done } Since the device ctrl could be updated as an non-RESETTING state by repeating probe/remove in userspace (which is a normal situation), we can replace stack dumping WARN_ON with a warnning message. Fixes: 82b057caefaff ("nvme-pci: fix multiple ctrl removal schedulin") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28spi: cadence: Correct initialisation of runtime PM againMarek Vasut
[ Upstream commit 56912da7a68c8356df6a6740476237441b0b792a ] The original implementation of RPM handling in probe() was mostly correct, except it failed to call pm_runtime_get_*() to activate the hardware. The subsequent fix, 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM"), breaks the implementation further, to the point where the system using this hard IP on ZynqMP hangs on boot, because it accesses hardware which is gated off. Undo 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM") and instead add missing pm_runtime_get_noresume() and move the RPM disabling all the way to the end of probe(). That makes ZynqMP not hang on boot yet again. Fixes: 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210716182133.218640-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28scsi: target: Fix protect handling in WRITE SAME(32)Dmitry Bogdanov
[ Upstream commit 6d8e7e7c932162bccd06872362751b0e1d76f5af ] WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st byte instead of 10th byte. Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME") Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28scsi: iscsi: Fix iface sysfs attr detectionMike Christie
[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ] A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when iscsi_iface_attr_is_visible tries to figure out the type by just checking the value, we can collide and return the wrong type. When we call into the driver we might not match and return that we don't want attr visible in sysfs. The patch fixes this by setting the type when we figure out what the param is. Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings") Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28liquidio: Fix unintentional sign extension issue on left shift of u16Colin Ian King
[ Upstream commit e7efc2ce3d0789cd7c21b70ff00cd7838d382639 ] Shifting the u16 integer oct->pcie_port by CN23XX_PKT_INPUT_CTL_MAC_NUM_POS (29) bits will be promoted to a 32 bit signed int and then sign-extended to a u64. In the cases where oct->pcie_port where bit 2 is set (e.g. 3..7) the shifted value will be sign extended and the top 32 bits of the result will be set. Fix this by casting the u16 values to a u64 before the 29 bit left shift. Addresses-Coverity: ("Unintended sign extension") Fixes: 3451b97cce2d ("liquidio: CN23XX register setup") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28spi: mediatek: fix fifo rx modePeter Hess
[ Upstream commit 3a70dd2d050331ee4cf5ad9d5c0a32d83ead9a43 ] In FIFO mode were two problems: - RX mode was never handled and - in this case the tx_buf pointer was NULL and caused an exception fix this by handling RX mode in mtk_spi_fifo_transfer Fixes: a568231f4632 ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by: Peter Hess <peter.hess@ph-home.de> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20210706121609.680534-1-linux@fw-web.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28nvme-pci: do not call nvme_dev_remove_admin from nvme_removeCasey Chen
[ Upstream commit 251ef6f71be2adfd09546a26643426fe62585173 ] nvme_dev_remove_admin could free dev->admin_q and the admin_tagset while they are being accessed by nvme_dev_disable(), which can be called by nvme_reset_work via nvme_remove_dead_ctrl. Commit cb4bfda62afa ("nvme-pci: fix hot removal during error handling") intended to avoid requests being stuck on a removed controller by killing the admin queue. But the later fix c8e9e9b7646e ("nvme-pci: unquiesce admin queue on shutdown"), together with nvme_dev_disable(dev, true) right before nvme_dev_remove_admin() could help dispatch requests and fail them early, so we don't need nvme_dev_remove_admin() any more. Fixes: cb4bfda62afa ("nvme-pci: fix hot removal during error handling") Signed-off-by: Casey Chen <cachen@purestorage.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28igb: Fix position of assignment to *ringJedrzej Jagielski
[ Upstream commit 382a7c20d9253bcd5715789b8179528d0f3de72c ] Assignment to *ring should be done after correctness check of the argument queue. Fixes: 91db364236c8 ("igb: Refactor igb_configure_cbs()") Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28igb: Check if num of q_vectors is smaller than max before array accessAleksandr Loktionov
[ Upstream commit 6c19d772618fea40d9681f259368f284a330fd90 ] Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed beyond its size. It was fixed by using a local variable num_q_vectors as a limit for loop index, and ensure that num_q_vectors is not bigger than MAX_Q_VECTORS. Fixes: 047e0030f1e6 ("igb: add new data structure for handling interrupts and NAPI") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Slawomir Laba <slawomirx.laba@intel.com> Reviewed-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Reviewed-by: Mateusz Palczewski <mateusz.placzewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28iavf: Fix an error handling path in 'iavf_probe()'Christophe JAILLET
[ Upstream commit af30cbd2f4d6d66a9b6094e0aa32420bc8b20e08 ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-24 20:50:16 +0000