summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-02-05Revert "drm/vc4: hdmi: Make sure the device is powered with CEC" againGreg Kroah-Hartman
This reverts commit 9b0d360fd783c711fc1cafa51f3e03bdf8ca5518 which is commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. It wasn't applied correctly, something went wrong with an attempt to fix it up again, so just revert the whole thing to be back at a clean state. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220205171238.GA3073350@roeck-us.net Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/Yf5lNIJnvhP4ajam@kroah.com Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Michael Stapelberg <michael+drm@stapelberg.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05Revert "drm/vc4: hdmi: Make sure the device is powered with CEC"Greg Kroah-Hartman
This reverts commit 3a63b718200be5b1997f6eb28e5e688ec58ec41b which is commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. It wasn't applied correctly, something went wrong with an attempt to fix it up again, so just revert the whole thing to be back at a clean state. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220205171238.GA3073350@roeck-us.net Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/Yf5lNIJnvhP4ajam@kroah.com Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Michael Stapelberg <michael+drm@stapelberg.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05e1000e: Handshake with CSME starts from ADL platformsSasha Neftin
commit cad014b7b5a6897d8c4fad13e2888978bfb7a53f upstream. Handshake with CSME/AMT on none provisioned platforms during S0ix flow is not supported on TGL platform and can cause to HW unit hang. Update the handshake with CSME flow to start from the ADL platform. Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: ipa: request IPA register values be retainedAlex Elder
commit 34a081761e4e3c35381cbfad609ebae2962fe2f8 upstream. In some cases, the IPA hardware needs to request the always-on subsystem (AOSS) to coordinate with the IPA microcontroller to retain IPA register values at power collapse. This is done by issuing a QMP request to the AOSS microcontroller. A similar request ondoes that request. We must get and hold the "QMP" handle early, because we might get back EPROBE_DEFER for that. But the actual request should be sent while we know the IPA clock is active, and when we know the microcontroller is operational. Fixes: 1aac309d3207 ("net: ipa: use autosuspend") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: amd-xgbe: Fix skb data length underflowShyam Sundar S K
commit 5aac9108a180fc06e28d4e7fb00247ce603b72ee upstream. There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware") Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: amd-xgbe: ensure to reset the tx_timer_active flagRaju Rangoju
commit 7674b7b559b683478c3832527c59bceb169e701d upstream. Ensure to reset the tx_timer_active flag in xgbe_stop(), otherwise a port restart may result in tx timeout due to uncleared flag. Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05i40e: Fix reset path while removing the driverKaren Sornek
commit 6533e558c6505e94c3e0ed4281ed5e31ec985f4d upstream. Fix the crash in kernel while dereferencing the NULL pointer, when the driver is unloaded and simultaneously the VSI rings are being stopped. The hardware requires 50msec in order to finish RX queues disable. For this purpose the driver spins in mdelay function for the operation to be completed. For example changing number of queues which requires reset would fail in the following call stack: 1) i40e_prep_for_reset 2) i40e_pf_quiesce_all_vsi 3) i40e_quiesce_vsi 4) i40e_vsi_close 5) i40e_down 6) i40e_vsi_stop_rings 7) i40e_vsi_control_rx -> disable requires the delay of 50msecs 8) continue back in i40e_down function where i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash When the driver was spinning vsi_release called i40e_vsi_free_arrays where the vsi->tx_rings resources were freed and the pointer was set to NULL. Fixes: 5b6d4a7f20b0 ("i40e: Fix crash during removing i40e driver") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05i40e: Fix reset bw limit when DCB enabled with 1 TCJedrzej Jagielski
commit 3d2504663c41104b4359a15f35670cfa82de1bbf upstream. There was an AQ error I40E_AQ_RC_EINVAL when trying to reset bw limit as part of bw allocation setup. This was caused by trying to reset bw limit with DCB enabled. Bw limit should not be reset when DCB is enabled. The code was relying on the pf->flags to check if DCB is enabled but if only 1 TC is available this flag will not be set even though DCB is enabled. Add a check for number of TC and if it is 1 don't try to reset bw limit even if pf->flags shows DCB as disabled. Fixes: fa38e30ac73f ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled") Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05ipheth: fix EOVERFLOW in ipheth_rcvbulk_callbackGeorgi Valkov
commit 63e4b45c82ed1bde979da7052229a4229ce9cabf upstream. When rx_buf is allocated we need to account for IPHETH_IP_ALIGN, which reduces the usable size by 2 bytes. Otherwise we have 1512 bytes usable instead of 1514, and if we receive more than 1512 bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW, after which the driver malfunctiones and all communication stops. Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75 Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14") Signed-off-by: Georgi Valkov <gvalkov@abv.bg> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/ Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: Avoid implicit modify hdr for decap drop ruleRoi Dayan
commit 5b209d1a22afabfb7d644abb10510c5713a3e569 upstream. Currently the driver adds implicit modify hdr action for decap rules on tunnel devices if the port is an ovs port. This is also done if the action is drop and makes the modify hdr redundant and also the FW doesn't support it and will generate a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fix it by adding the implicit modify hdr only for fwd actions. Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Fixes: 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5: E-Switch, Fix uninitialized variable modactMaor Dickman
commit d8e5883d694bb053b19c4142a2d1f43a34f6fe2c upstream. The variable modact is not initialized before used in command modify header allocation which can cause command to fail. Fix by initializing modact with zeros. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: Fix broken SKB allocation in HW-GROKhalid Manaa
commit 7957837b816f11eecb9146235bb0715478f4c81f upstream. In case the HW doesn't perform header-data split, it will write the whole packet into the data buffer in the WQ, in this case the SHAMPO CQE handler couldn't use the header entry to build the SKB, instead it should allocate a new memory to build the SKB using the function: mlx5e_skb_from_cqe_mpwrq_nonlinear. Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support") Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: Fix wrong calculation of header index in HW_GROKhalid Manaa
commit b8d91145ed7cfa046cc07bcfb277465b9d45da73 upstream. The HW doesn't wrap the CQE.shampo.header_index field according to the headers buffer size, instead it always increases it until reaching overflow of u16 size. Thus the mlx5e_handle_rx_cqe_mpwrq_shampo handler should mask the CQE header_index field to find the actual header index in the headers buffer. Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support") Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: Avoid field-overflowing memcpy()Kees Cook
commit ad5185735f7dab342fdd0dd41044da4c9ccfef67 upstream. In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing: #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. "pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5: Bridge, Fix devlink deadlock on net namespace deletionRoi Dayan
commit 880b517691908fb753019b9b27cd082e7617debd upstream. When changing mode to switchdev, rep bridge init registered to netdevice notifier holds the devlink lock and then takes pernet_ops_rwsem. At that time deleting a netns holds pernet_ops_rwsem and then takes the devlink lock. Example sequence is: $ ip netns add foo $ devlink dev eswitch set pci/0000:00:08.0 mode switchdev & $ ip netns del foo deleting netns trace: [ 1185.365555] ? devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.368331] ? mutex_lock_io_nested+0x13f0/0x13f0 [ 1185.370984] ? xt_find_table+0x40/0x100 [ 1185.373244] ? __mutex_lock+0x24a/0x15a0 [ 1185.375494] ? net_generic+0xa0/0x1c0 [ 1185.376844] ? wait_for_completion_io+0x280/0x280 [ 1185.377767] ? devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.378686] devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.379579] ? devlink_nl_cmd_get_dumpit+0x3a0/0x3a0 [ 1185.380557] ? xt_find_table+0xda/0x100 [ 1185.381367] cleanup_net+0x372/0x8e0 changing mode to switchdev trace: [ 1185.411267] down_write+0x13a/0x150 [ 1185.412029] ? down_write_killable+0x180/0x180 [ 1185.413005] register_netdevice_notifier+0x1e/0x210 [ 1185.414000] mlx5e_rep_bridge_init+0x181/0x360 [mlx5_core] [ 1185.415243] mlx5e_uplink_rep_enable+0x269/0x480 [mlx5_core] [ 1185.416464] ? mlx5e_uplink_rep_disable+0x210/0x210 [mlx5_core] [ 1185.417749] mlx5e_attach_netdev+0x232/0x400 [mlx5_core] [ 1185.418906] mlx5e_netdev_attach_profile+0x15b/0x1e0 [mlx5_core] [ 1185.420172] mlx5e_netdev_change_profile+0x15a/0x1d0 [mlx5_core] [ 1185.421459] mlx5e_vport_rep_load+0x557/0x780 [mlx5_core] [ 1185.422624] ? mlx5e_stats_grp_vport_rep_num_stats+0x10/0x10 [mlx5_core] [ 1185.424006] mlx5_esw_offloads_rep_load+0xdb/0x190 [mlx5_core] [ 1185.425277] esw_offloads_enable+0xd74/0x14a0 [mlx5_core] Fix this by registering rep bridges for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: Don't treat small ceil values as unlimited in HTB offloadMaxim Mikityanskiy
commit 736dfe4e68b868829a1e89dfef4a44c1580d4478 upstream. The hardware spec defines max_average_bw == 0 as "unlimited bandwidth". max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become 0 when ceil is small, leading to an undesired effect of having no bandwidth limit. This commit fixes it by rounding up small values of ceil to 1 Mbit/s. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLEDima Chumak
commit 55b2ca702cfa744a9eb108915996a2294da47e71 upstream. Only prio 1 is supported for nic mode when there is no ignore flow level support in firmware. But for switchdev mode, which supports fixed number of statically pre-allocated prios, this restriction is not relevant so it can be relaxed. Fixes: d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: TC, Reject rules with forward and drop actionsRoi Dayan
commit 5623ef8a118838aae65363750dfafcba734dc8cb upstream. Such rules are redundant but allowed and passed to the driver. The driver does not support offloading such rules so return an error. Fixes: 03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: Fix module EEPROM queryGal Pressman
commit 4a08a131351e375a2969b98e46df260ed04dcba7 upstream. When querying the module EEPROM, there was a misusage of the 'offset' variable vs the 'query.offset' field. Fix that by always using 'offset' and assigning its value to 'query.offset' right before the mcia register read call. While at it, the cross-pages read size adjustment was changed to be more intuitive. Fixes: e19b0a3474ab ("net/mlx5: Refactor module EEPROM query") Reported-by: Wang Yugui <wangyugui@e16-tech.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5: Use del_timer_sync in fw reset flow of halting pollMaher Sanalla
commit 3c5193a87b0fea090aa3f769d020337662d87b5e upstream. Substitute del_timer() with del_timer_sync() in fw reset polling deactivation flow, in order to prevent a race condition which occurs when del_timer() is called and timer is deactivated while another process is handling the timer interrupt. A situation that led to the following call trace: RIP: 0010:run_timer_softirq+0x137/0x420 <IRQ> recalibrate_cpu_khz+0x10/0x10 ktime_get+0x3e/0xa0 ? sched_clock_cpu+0xb/0xc0 __do_softirq+0xf5/0x2ea irq_exit_rcu+0xc1/0xf0 sysvec_apic_timer_interrupt+0x9e/0xc0 asm_sysvec_apic_timer_interrupt+0x12/0x20 </IRQ> Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: Fix handling of wrong devices during bond neteventMaor Dickman
commit ec41332e02bd0acf1f24206867bb6a02f5877a62 upstream. Current implementation of bond netevent handler only check if the handled netdev is VF representor and it missing a check if the VF representor is on the same phys device of the bond handling the netevent. Fix by adding the missing check and optimizing the check if the netdev is VF representor so it will not access uninitialized private data and crashes. BUG: kernel NULL pointer dereference, address: 000000000000036c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Workqueue: eth3bond0 bond_mii_monitor [bonding] RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core] RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000 RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880 RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008 R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10 R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core] mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core] mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core] raw_notifier_call_chain+0x41/0x60 call_netdevice_notifiers_info+0x34/0x80 netdev_lower_state_changed+0x4e/0xa0 bond_mii_monitor+0x56b/0x640 [bonding] process_one_work+0x1b9/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5: Bridge, ensure dev_name is null-terminatedVlad Buslov
commit 350d9a823734b5a7e767cddc3bdde5f0bcbb7ff4 upstream. Even though net_device->name is guaranteed to be null-terminated string of size<=IFNAMSIZ, the test robot complains that return value of netdev_name() can be larger: In file included from include/trace/define_trace.h:102, from drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:113, from drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:12: drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h: In function 'trace_event_raw_event_mlx5_esw_bridge_fdb_template': >> drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:24:29: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation] 24 | strncpy(__entry->dev_name, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ 25 | netdev_name(fdb->dev), | ~~~~~~~~~~~~~~~~~~~~~~ 26 | IFNAMSIZ); | ~~~~~~~~~ This is caused by the fact that default value of IFNAMSIZ is 16, while placeholder value that is returned by netdev_name() for unnamed net devices is larger than that. The offending code is in a tracing function that is only called for mlx5 representors, so there is no straightforward way to reproduce the issue but let's fix it for correctness sake by replacing strncpy() with strscpy() to ensure that resulting string is always null-terminated. Fixes: 9724fd5d9c2a ("net/mlx5: Bridge, add tracepoints") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5: Bridge, take rtnl lock in init error handlerVlad Buslov
commit 04f8c12f031fcd0ffa0c72822eb665ceb2c872e7 upstream. The mlx5_esw_bridge_cleanup() is expected to be called with rtnl lock taken, which is true for mlx5e_rep_bridge_cleanup() function but not for error handling code in mlx5e_rep_bridge_init(). Add missing rtnl lock/unlock calls and extend both mlx5_esw_bridge_cleanup() and its dual function mlx5_esw_bridge_init() with ASSERT_RTNL() to verify the invariant from now on. Fixes: 7cd6a54a8285 ("net/mlx5: Bridge, handle FDB events") Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: TC, Reject rules with drop and modify hdr actionRoi Dayan
commit a2446bc77a16cefd27de712d28af2396d6287593 upstream. This kind of action is not supported by firmware and generates a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fixes: d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP trafficRaed Salem
commit de47db0cf7f4a9c555ad204e06baa70b50a70d08 upstream. IPsec Tunnel mode crypto offload software parser (SWP) setting in data path currently always set the inner L4 offset regardless of the encapsulated L4 header type and whether it exists in the first place, this breaks non TCP/UDP traffic as such. Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4 header protocol is TCP/UDP. While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP flag to address the case where the ip header protocol is IPv6. Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated trafficRaed Salem
commit 5352859b3bfa0ca188b2f1d2c1436fddc781e3b6 upstream. IPsec crypto offload always set the ethernet segment checksum flags with the inner L4 header checksum flag enabled for encapsulated IPsec offloaded packet regardless of the encapsulated L4 header type, and even if it doesn't exists in the first place, this breaks non TCP/UDP traffic as such. Set the inner L4 checksum flag only when the encapsulated L4 header protocol is TCP/UDP using software parser swp_inner_l4_offset field as indication. Fixes: 5cfb540ef27b ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: phy: Fix qca8081 with speeds lower than 2.5Gb/sJonathan McDowell
commit 881cc731df6af99a21622e9be25a23b81adcd10b upstream. A typo in qca808x_read_status means we try to set SMII mode on the port rather than SGMII when the link speed is not 2.5Gb/s. This results in no traffic due to the mismatch in configuration between the phy and the mac. v2: Only change interface mode when the link is up Fixes: 79c7bc0521545 ("net: phy: add qca8081 read_status") Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05drm/vc4: hdmi: Make sure the device is powered with CECMaxime Ripard
Commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. The original commit depended on a rework commit (724fc856c09e ("drm/vc4: hdmi: Split the CEC disable / enable functions in two")) that (rightfully) didn't reach stable. However, probably because the context changed, when the patch was applied to stable the pm_runtime_put called got moved to the end of the vc4_hdmi_cec_adap_enable function (that would have become vc4_hdmi_cec_disable with the rework) to vc4_hdmi_cec_init. This means that at probe time, we now drop our reference to the clocks and power domains and thus end up with a CPU hang when the CPU tries to access registers. The call to pm_runtime_resume_and_get() is also problematic since the .adap_enable CEC hook is called both to enable and to disable the controller. That means that we'll now call pm_runtime_resume_and_get() at disable time as well, messing with the reference counting. The behaviour we should have though would be to have pm_runtime_resume_and_get() called when the CEC controller is enabled, and pm_runtime_put when it's disabled. We need to move things around a bit to behave that way, but it aligns stable with upstream. Cc: <stable@vger.kernel.org> # 5.10.x Cc: <stable@vger.kernel.org> # 5.15.x Cc: <stable@vger.kernel.org> # 5.16.x Reported-by: Michael Stapelberg <michael+drm@stapelberg.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: ipa: prevent concurrent replenishAlex Elder
commit 998c0bd2b3715244da7639cc4e6a2062cb79c3f4 upstream. We have seen cases where an endpoint RX completion interrupt arrives while replenishing for the endpoint is underway. This causes another instance of replenishing to begin as part of completing the receive transaction. If this occurs it can lead to transaction corruption. Use a new flag to ensure only one replenish instance for an endpoint executes at a time. Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: ipa: use a bitmap for endpoint replenish_enabledAlex Elder
commit c1aaa01dbf4cef95af3e04a5a43986c290e06ea3 upstream. Define a new replenish_flags bitmap to contain Boolean flags associated with an endpoint's replenishing state. Replace the replenish_enabled field with a flag in that bitmap. This is to prepare for the next patch, which adds another flag. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05PCI: pciehp: Fix infinite loop in IRQ handler upon power faultLukas Wunner
commit 23584c1ed3e15a6f4bfab8dc5a88d94ab929ee12 upstream. The Power Fault Detected bit in the Slot Status register differs from all other hotplug events in that it is sticky: It can only be cleared after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8: If a power controller detects a main power fault on the hot-plug slot, it must automatically set its internal main power fault latch [...]. The main power fault latch is cleared when software turns off power to the hot-plug slot. The stickiness used to cause interrupt storms and infinite loops which were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable software notification on empty slots"). Unfortunately in 2020 the infinite loop issue was inadvertently reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race"): The hardirq handler pciehp_isr() clears the PFD bit until pciehp's power_fault_detected flag is set. That happens in the IRQ thread pciehp_ist(), which never learns of the event because the hardirq handler is stuck in an infinite loop. Fix by setting the power_fault_detected flag already in the hardirq handler. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989 Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8PR11MB5702.namprd11.prod.outlook.com Fixes: 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race") Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.1637187226.git.lukas@wunner.de Reported-by: Joseph Bao <joseph.bao@intel.com> Tested-by: Joseph Bao <joseph.bao@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.19+ Cc: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01mtd: rawnand: mpc5121: Remove unused variable in ads5121_select_chip()Geert Uytterhoeven
commit 33a0da68fb073360d36ce1a0e852f75fede7c21e upstream. drivers/mtd/nand/raw/mpc5121_nfc.c: In function ‘ads5121_select_chip’: drivers/mtd/nand/raw/mpc5121_nfc.c:294:19: warning: unused variable ‘mtd’ [-Wunused-variable] 294 | struct mtd_info *mtd = nand_to_mtd(nand); | ^~~ Fixes: 758b56f58b66bebc ("mtd: rawnand: Pass a nand_chip object to chip->select_chip()") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211122132138.3899138-1-geert@linux-m68k.org Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01usb: dwc3: xilinx: fix uninitialized return valueRobert Hancock
commit b470947c3672f7eb7c4c271d510383d896831cc2 upstream. A previous patch to skip part of the initialization when a USB3 PHY was not present could result in the return value being uninitialized in that case, causing spurious probe failures. Initialize ret to 0 to avoid this. Fixes: 9678f3361afc ("usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode") Cc: <stable@vger.kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220127221500.177021-1-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01PCI: mt7621: Remove unused function pcie_rmw()Sergio Paracuellos
commit c035366d9c9fe48d947ee6c43465ab43d42e20f2 upstream. Function pcie_rmw() is not being used at all and can be deleted. Hence get rid of it, which fixes this warning: drivers/pci/controller/pcie-mt7621.c:112:20: warning: unused function 'pcie_rmw' [-Wunused-function] Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver") Link: https://lore.kernel.org/r/20220124113003.406224-3-sergio.paracuellos@gmail.com Link: https://lore.kernel.org/all/202201241754.igtHzgHv-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01irqchip/realtek-rtl: Fix off-by-one in routingSander Vanheule
commit 91351b5dd0fd494eb2d85e1bb6aca77b067447e0 upstream. There is an offset between routing values (1..6) and the connected MIPS CPU interrupts (2..7), but no distinction was made between these two values. This issue was previously hidden during testing, because an interrupt mapping was used where for each required interrupt another (unused) routing was configured, with an offset of +1. Offset the CPU IRQ numbers by -1 to retrieve the correct routing value. Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller") Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/177b920aa8d8610615692d0e657e509f363c85ca.1641739718.git.sander@svanheule.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01irqchip/realtek-rtl: Map control data to virqSander Vanheule
commit 291e79c7e2eb6fdc016453597b78482e06199d0f upstream. The driver assigned the irqchip and irq handler to the hardware irq, instead of the virq. This is incorrect, and only worked because these irq numbers happened to be the same on the devices used for testing the original driver. Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller") Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/4b4936606480265db47df152f00bc2ed46340599.1641739718.git.sander@svanheule.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01gve: Fix GFP flags when allocing pagesCatherine Sullivan
[ Upstream commit a92f7a6feeb3884c69c1c7c1f13bccecb2228ad0 ] Use GFP_ATOMIC when allocating pages out of the hotpath, continue to use GFP_KERNEL when allocating pages during setup. GFP_KERNEL will allow blocking which allows it to succeed more often in a low memory enviornment but in the hotpath we do not want to allow the allocation to block. Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support") Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Link: https://lore.kernel.org/r/20220126003843.3584521-1-awogbemila@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01Revert "drm/ast: Support 1600x900 with 108MHz PCLK"Dave Airlie
[ Upstream commit 76cea3d95513fe40000d06a3719c4bb6b53275e2 ] This reverts commit 9bb7b689274b67ecb3641e399e76f84adc627df1. This caused a regression reported to Red Hat. Fixes: 9bb7b689274b ("drm/ast: Support 1600x900 with 108MHz PCLK") Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220120040527.552068-1-airlied@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01net: hns3: handle empty unknown interrupt for VFYufeng Mo
[ Upstream commit 2f61353cd2f789a4229b6f5c1c24a40a613357bb ] Since some interrupt states may be cleared by hardware, the driver may receive an empty interrupt. Currently, the VF driver directly disables the vector0 interrupt in this case. As a result, the VF is unavailable. Therefore, the vector0 interrupt should be enabled in this case. Fixes: b90fcc5bd904 ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01net: cpsw: Properly initialise struct page_pool_paramsToke Høiland-Jørgensen
[ Upstream commit c63003e3d99761afb280add3b30de1cf30fa522b ] The cpsw driver didn't properly initialise the struct page_pool_params before calling page_pool_create(), which leads to crashes after the struct has been expanded with new parameters. The second Fixes tag below is where the buggy code was introduced, but because the code was moved around this patch will only apply on top of the commit in the first Fixes tag. Fixes: c5013ac1dd0e ("net: ethernet: ti: cpsw: move set of common functions in cpsw_priv") Fixes: 9ed4050c0d75 ("net: ethernet: ti: cpsw: add XDP support") Reported-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Tested-by: Colin Foster <colin.foster@in-advantage.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01yam: fix a memory leak in yam_siocdevprivate()Hangyu Hua
[ Upstream commit 29eb31542787e1019208a2e1047bb7c76c069536 ] ym needs to be free when ym->cmd != SIOCYAMSMCS. Fixes: 0781168e23a2 ("yam: fix a missing-check bug") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01drm/msm/a6xx: Add missing suspend_count incrementRob Clark
[ Upstream commit 860a7b2a87b7c743154824d0597b6c3eb3b53154 ] Reported-by: Danylo Piliaiev <dpiliaiev@igalia.com> Fixes: 3ab1c5cc3939 ("drm/msm: Add param for userspace to query suspend count") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220113163215.215367-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pccJosé Expósito
[ Upstream commit 170b22234d5495f5e0844246e23f004639ee89ba ] The function performs a check on the "ctx" input parameter, however, it is used before the check. Initialize the "base" variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 4259ff7ae509e ("drm/msm/dpu: add support for pcc color block in dpu driver") Addresses-Coverity-ID: 1493866 ("Null pointer dereference") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20220109192431.135949-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01drm/msm/hdmi: Fix missing put_device() call in msm_hdmi_get_phyMiaoqian Lin
[ Upstream commit 774fe0cd838d1b1419d41ab4ea0613c80d4ecbd7 ] The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path. Fixes: e00012b256d4 ("drm/msm/hdmi: Make HDMI core get its PHY") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220107085026.23831-1-linmq006@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01hwmon: (nct6775) Fix crash in clear_caseopenGuenter Roeck
[ Upstream commit 79da533d3cc717ccc05ddbd3190da8a72bc2408b ] Paweł Marciniak reports the following crash, observed when clearing the chassis intrusion alarm. BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 4815 Comm: bash Tainted: G S 5.16.2-200.fc35.x86_64 #1 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P2.60A 05/03/2018 RIP: 0010:clear_caseopen+0x5a/0x120 [nct6775] Code: 68 70 e8 e9 32 b1 e3 85 c0 0f 85 d2 00 00 00 48 83 7c 24 ... RSP: 0018:ffffabcb02803dd8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8e8808192880 RSI: 0000000000000000 RDI: ffff8e87c7509a68 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000a R10: 000000000000000a R11: f000000000000000 R12: 000000000000001f R13: ffff8e87c7509828 R14: ffff8e87c7509a68 R15: ffff8e88494527a0 FS: 00007f4db9151740(0000) GS:ffff8e8ebfec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000166b66001 CR4: 00000000001706e0 Call Trace: <TASK> kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x10b/0x180 vfs_write+0x209/0x2a0 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The problem is that the device passed to clear_caseopen() is the hwmon device, not the platform device, and the platform data is not set in the hwmon device. Store the pointer to sio_data in struct nct6775_data and get if from there if needed. Fixes: 2e7b9886968b ("hwmon: (nct6775) Use superio_*() function pointers in sio_data.") Cc: Denis Pauk <pauk.denis@gmail.com> Cc: Bernhard Seibold <mail@bernhard-seibold.de> Reported-by: Paweł Marciniak <pmarciniak@lodz.home.pl> Tested-by: Denis Pauk <pauk.denis@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01can: tcan4x5x: regmap: fix max register valueMarc Kleine-Budde
[ Upstream commit e59986de5ff701494e14c722b78b6e6d513e0ab5 ] The MRAM of the tcan4x5x has a size of 2K and starts at 0x8000. There are no further registers in the tcan4x5x making 0x87fc the biggest addressable register. This patch fixes the max register value of the regmap config from 0x8ffc to 0x87fc. Fixes: 6e1caaf8ed22 ("can: tcan4x5x: fix max register value") Link: https://lore.kernel.org/all/20220119064011.2943292-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01video: hyperv_fb: Fix validation of screen resolutionMichael Kelley
[ Upstream commit 9ff5549b1d1d3c3a9d71220d44bd246586160f1d ] In the WIN10 version of the Synthetic Video protocol with Hyper-V, Hyper-V reports a list of supported resolutions as part of the protocol negotiation. The driver calculates the maximum width and height from the list of resolutions, and uses those maximums to validate any screen resolution specified in the video= option on the kernel boot line. This method of validation is incorrect. For example, the list of supported resolutions could contain 1600x1200 and 1920x1080, both of which fit in an 8 Mbyte frame buffer. But calculating the max width and height yields 1920 and 1200, and 1920x1200 resolution does not fit in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted, causing a kernel fault when the driver accesses memory outside the frame buffer. Instead, validate the specified screen resolution by calculating its size, and comparing against the frame buffer size. Delete the code for calculating the max width and height from the list of resolutions, since these max values have no use. Also add the frame buffer size to the info message to aid in understanding why a resolution might be rejected. Fixes: 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Acked-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/1642360711-2335-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01ibmvnic: don't spin in taskletSukadev Bhattiprolu
[ Upstream commit 48079e7fdd0269d66b1d7d66ae88bd03162464ad ] ibmvnic_tasklet() continuously spins waiting for responses to all capability requests. It does this to avoid encountering an error during initialization of the vnic. However if there is a bug in the VIOS and we do not receive a response to one or more queries the tasklet ends up spinning continuously leading to hard lock ups. If we fail to receive a message from the VIOS it is reasonable to timeout the login attempt rather than spin indefinitely in the tasklet. Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01ibmvnic: init ->running_cap_crqs earlySukadev Bhattiprolu
[ Upstream commit 151b6a5c06b678687f64f2d9a99fd04d5cd32b72 ] We use ->running_cap_crqs to determine when the ibmvnic_tasklet() should send out the next protocol message type. i.e when we get back responses to all our QUERY_CAPABILITY CRQs we send out REQUEST_CAPABILITY crqs. Similiary, when we get responses to all the REQUEST_CAPABILITY crqs, we send out the QUERY_IP_OFFLOAD CRQ. We currently increment ->running_cap_crqs as we send out each CRQ and have the ibmvnic_tasklet() send out the next message type, when this running_cap_crqs count drops to 0. This assumes that all the CRQs of the current type were sent out before the count drops to 0. However it is possible that we send out say 6 CRQs, get preempted and receive all the 6 responses before we send out the remaining CRQs. This can result in ->running_cap_crqs count dropping to zero before all messages of the current type were sent and we end up sending the next protocol message too early. Instead initialize the ->running_cap_crqs upfront so the tasklet will only send the next protocol message after all responses are received. Use the cap_reqs local variable to also detect any discrepancy (either now or in future) in the number of capability requests we actually send. Currently only send_query_cap() is affected by this behavior (of sending next message early) since it is called from the worker thread (during reset) and from application thread (during ->ndo_open()) and they can be preempted. send_request_cap() is only called from the tasklet which processes CRQ responses sequentially, is not be affected. But to maintain the existing symmtery with send_query_capability() we update send_request_capability() also. Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01ibmvnic: Allow extra failures before disablingSukadev Bhattiprolu
[ Upstream commit db9f0e8bf79e6da7068b5818fea0ffd9d0d4b4da ] If auto-priority-failover (APF) is enabled and there are at least two backing devices of different priorities, some resets like fail-over, change-param etc can cause at least two back to back failovers. (Failover from high priority backing device to lower priority one and then back to the higher priority one if that is still functional). Depending on the timimg of the two failovers it is possible to trigger a "hard" reset and for the hard reset to fail due to failovers. When this occurs, the driver assumes that the network is unstable and disables the VNIC for a 60-second "settling time". This in turn can cause the ethtool command to fail with "No such device" while the vnic automatically recovers a little while later. Given that it's possible to have two back to back failures, allow for extra failures before disabling the vnic for the settling time. Fixes: f15fde9d47b8 ("ibmvnic: delay next reset if hard reset fails") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-25 17:34:26 +0000