| Age | Commit message (Collapse) | Author |
|---|
|
commit 5180ff1364bc26c031b54a68a80aa90ce0028b70 upstream.
To prepare for removal of i40e_status, change the variables
from i40e_status to int. This eases the transition when values
are changed to return standard int error codes over enum i40e_status.
As such changes often also change variable orders, a cleanup
is also applied here to make variables conform to RCT and
some lines are also reformatted where applicable.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d968af27a166e055bdd5f832f095d809eadb992 upstream.
Remove the i40e_stat_str() function which prints the string
representation of the i40e_status error code. With upcoming changes
moving away from i40e_status, there will be no need for this function
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d135352bb5d885a7b21417103423301a40c1b8b upstream.
In an effort to remove i40e status codes and replace them
with standard kernel errornums, unused values of i40e_status_code
were removed.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d31137619776f9c173a46a79bc7733a2b106061f upstream.
tb_port_is_clx_enabled() generates a valid warning with gcc-13:
drivers/thunderbolt/switch.c:1286:6: error: conflicting types for 'tb_port_is_clx_enabled' due to enum/integer mismatch; have 'bool(struct tb_port *, unsigned int)' ...
drivers/thunderbolt/tb.h:1050:6: note: previous declaration of 'tb_port_is_clx_enabled' with type 'bool(struct tb_port *, enum tb_clx)' ...
I.e. the type of the 2nd parameter of tb_port_is_clx_enabled() in the
declaration is unsigned int, while the definition spells enum tb_clx.
Synchronize them to the former as the parameter is in fact a mask of the
enum values.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 38d11da522aacaa05898c734a1cec86f1e611129 upstream.
Commit fa247089de99 ("dm: requeue IO if mapping table not yet available")
added a detection of whether the mapping table is available in the IO
submission process. If the mapping table is unavailable, it returns
BLK_STS_RESOURCE and requeues the IO.
This can lead to the following deadlock problem:
dm create mount
ioctl(DM_DEV_CREATE_CMD)
ioctl(DM_TABLE_LOAD_CMD)
do_mount
vfs_get_tree
ext4_get_tree
get_tree_bdev
sget_fc
alloc_super
// got &s->s_umount
down_write_nested(&s->s_umount, ...);
ext4_fill_super
ext4_load_super
ext4_read_bh
submit_bio
// submit and wait io end
ioctl(DM_DEV_SUSPEND_CMD)
dev_suspend
do_resume
dm_suspend
__dm_suspend
lock_fs
freeze_bdev
get_active_super
grab_super
// wait for &s->s_umount
down_write(&s->s_umount);
dm_swap_table
__bind
// set md->map(can't get here)
IO will be continuously requeued while holding the lock since mapping
table is NULL. At the same time, mapping table won't be set since the
lock is not available.
Like request-based DM, bio-based DM also has the same problem.
It's not proper to just abort IO if the mapping table not available.
So clear DM_SKIP_LOCKFS_FLAG when the mapping table is NULL, this
allows the DM table to be loaded and the IO submitted upon resume.
Fixes: fa247089de99 ("dm: requeue IO if mapping table not yet available")
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3d32aaa7e66d5c1479a3c31d6c2c5d45dd0d3b89 upstream.
syzkaller found the following problematic rwsem locking (with write
lock already held):
down_read+0x9d/0x450 kernel/locking/rwsem.c:1509
dm_get_inactive_table+0x2b/0xc0 drivers/md/dm-ioctl.c:773
__dev_status+0x4fd/0x7c0 drivers/md/dm-ioctl.c:844
table_clear+0x197/0x280 drivers/md/dm-ioctl.c:1537
In table_clear, it first acquires a write lock
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L1520
down_write(&_hash_lock);
Then before the lock is released at L1539, there is a path shown above:
table_clear -> __dev_status -> dm_get_inactive_table -> down_read
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L773
down_read(&_hash_lock);
It tries to acquire the same read lock again, resulting in the deadlock
problem.
Fix this by moving table_clear()'s __dev_status() call to after its
up_write(&_hash_lock);
Cc: stable@vger.kernel.org
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 98dba02d9a93eec11bffbb93c7c51624290702d2 upstream.
This command will crash with NULL pointer dereference:
dmsetup create flakey --table \
"0 `blockdev --getsize /dev/ram0` flakey /dev/ram0 0 0 1 2 corrupt_bio_byte 512"
Fix the crash by checking if arg_name is non-NULL before comparing it.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b79a428c02769f2a11f8ae76bf866226d134887 upstream.
Otherwise the journal_io_cache will leak if dm_register_target() fails.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6827af4a9a9f5bb664c42abf7c11af4978d72201 upstream.
Otherwise the _hydration_cache will leak if dm_register_target() fails.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e8c5d45f82ce0c238a4817739892fe8897a3dcc3 upstream.
In verity_end_io(), if bi_status is not BLK_STS_OK, it can be return
directly. But if FEC configured, it is desired to correct the data page
through verity_verify_io. And the return value will be converted to
blk_status and passed to verity_finish_io().
BTW, when a bit is set in v->validated_blocks, verity_verify_io() skips
verification regardless of I/O error for the corresponding bio. In this
case, the I/O error could not be returned properly, and as a result,
there is a problem that abnormal data could be read for the
corresponding block.
To fix this problem, when an I/O error occurs, do not skip verification
even if the bit related is set in v->validated_blocks.
Fixes: 843f38d382b1 ("dm verity: add 'check_at_most_once' option to only validate hashes once")
Cc: stable@vger.kernel.org
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c82729e06644f4e087f5ff0f91b8fb15e03b8890 upstream.
While using the vdpa device with vIOMMU enabled
in the guest VM, when the vdpa device bind to vfio-pci and run testpmd
then system will fail to unmap.
The test process is
Load guest VM --> attach to virtio driver--> bind to vfio-pci driver
So the mapping process is
1)batched mode map to normal MR
2)batched mode unmapped the normal MR
3)unmapped all the memory
4)mapped to iommu MR
This error happened in step 3). The iotlb was freed in step 2)
and the function vhost_vdpa_process_iotlb_msg will return fail
Which causes failure.
To fix this, we will not remove the AS while the iotlb->nmaps is 0.
This will free in the vhost_vdpa_clean
Cc: stable@vger.kernel.org
Fixes: aaca8373c4b1 ("vhost-vdpa: support ASID based IOTLB API")
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230420151734.860168-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d8898ee50edecacdf0141f26fd90acf43d7e9cd7 upstream.
The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.
Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.
Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 933bf364e152cd60902cf9585c2ba310d593e69f upstream.
clk_cifout is derived from clk_cifout_src through an integer divider
limited to 32. clk_cifout_src is a child of either cpll, gpll or npll
without any possibility of a divider of any sort. The default clock
parent is cpll.
Let's allow clk_cifout to ask its parent clk_cifout_src to reparent in
order to find the real closest possible rate for clk_cifout and not one
derived from cpll only.
Cc: stable@vger.kernel.org # 4.10+
Fixes: fd8bc829336a ("clk: rockchip: fix the rk3399 cifout clock")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20221117-rk3399-cifout-set-rate-parent-v1-0-432548d04081@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7455b7007b9e93bcc2bc9c1c6c73a228e3152069 upstream.
Similar to commit 1c11289b34ab ("peci: cpu: Fix use-after-free in
adev_release()"), the auxiliary device is not torn down in the correct
order. If auxiliary_device_add() fails, the release callback will be
called twice, resulting in a UAF. Due to timing, the auxdev code in this
driver "took inspiration" from the aforementioned commit, and thus its
bugs too!
Moving auxiliary_device_uninit() to the unregister callback instead
avoids the issue.
CC: stable@vger.kernel.org
Fixes: b56bae2dd6fd ("clk: microchip: mpfs: add reset controller")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230413-critter-synopsis-dac070a86cb4@spud
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47515664ecfbde11425dff121f298ae4499425c9 upstream.
A race condition can happen if netdev is registered, but NAPI isn't
initialized yet, and meanwhile user space starts the netdev that will
enable NAPI. Then, it hits BUG_ON():
kernel BUG at net/core/dev.c:6423!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 417 Comm: iwd Not tainted 6.2.7-slab-dirty #3 eb0f5a8a9d91
Hardware name: LENOVO 21DL/LNVNB161216, BIOS JPCN20WW(V1.06) 09/20/2022
RIP: 0010:napi_enable+0x3f/0x50
Code: 48 89 c2 48 83 e2 f6 f6 81 89 08 00 00 02 74 0d 48 83 ...
RSP: 0018:ffffada1414f3548 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa01425802080 RCX: 0000000000000000
RDX: 00000000000002ff RSI: ffffada14e50c614 RDI: ffffa01425808dc0
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000100 R12: ffffa01425808f58
R13: 0000000000000000 R14: ffffa01423498940 R15: 0000000000000001
FS: 00007f5577c0a740(0000) GS:ffffa0169fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5577a19972 CR3: 0000000125a7a000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
rtw89_pci_ops_start+0x1c/0x70 [rtw89_pci 6cbc75429515c181cbc386478d5cfb32ffc5a0f8]
rtw89_core_start+0xbe/0x160 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22]
rtw89_ops_start+0x26/0x40 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22]
drv_start+0x42/0x100 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
ieee80211_do_open+0x311/0x7d0 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
ieee80211_open+0x6a/0x90 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2]
__dev_open+0xe0/0x180
__dev_change_flags+0x1da/0x250
dev_change_flags+0x26/0x70
do_setlink+0x37c/0x12c0
? ep_poll_callback+0x246/0x290
? __nla_validate_parse+0x61/0xd00
? __wake_up_common_lock+0x8f/0xd0
To fix this, follow Jonas' suggestion to switch the order of these
functions and move register netdev to be the last step of PCI probe.
Also, correct the error handling of rtw89_core_register_hw().
Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Cc: stable@vger.kernel.org
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/linux-wireless/CAOiHx=n7EwK2B9CnBR07FVA=sEzFagb8TkS4XC_qBNq8OwcYUg@mail.gmail.com/T/#t
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Larry Finger<Larry.Finger@lwfinger.net>
Reviewed-by: Larry Finger<Larry.Finger@lwfinger.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230323082839.20474-1-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14705f969d98187a1cc2682e0c9bd2e230b8098f upstream.
On my RTW8821CU chipset rfe_option reads as 0x22. Looking at the
vendor driver suggests that the field width of rfe_option is 5 bit,
so rfe_option should be masked with 0x1f.
Without this the rfe_option comparisons with 2 further down the
driver evaluate as false when they should really evaluate as true.
The effect is that 2G channels do not work.
rfe_option is also used as an array index into rtw8821c_rfe_defs[].
rtw8821c_rfe_defs[34] (0x22) was added as part of adding USB support,
likely because rfe_option reads as 0x22. As this now becomes 0x2,
rtw8821c_rfe_defs[34] is no longer used and can be removed.
Note that this might not be the whole truth. In the vendor driver
there are indeed places where the unmasked rfe_option value is used.
However, the driver has several places where rfe_option is tested
with the pattern if (rfe_option == 2 || rfe_option == 0x22) or
if (rfe_option == 4 || rfe_option == 0x24), so that rfe_option BIT(5)
has no influence on the code path taken. We therefore mask BIT(5)
out from rfe_option entirely until this assumption is proved wrong
by some chip variant we do not know yet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Alexandru gagniuc <mr.nuke.me@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: ValdikSS <iam@valdikss.org.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417140358.2240429-3-s.hauer@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d46e04ccd40457a0119b76e11ab64a2ad403e138 upstream.
Always run the entire init sequence (rtl8xxxu_init_device()) for
RTL8192EU. It's what the vendor driver does too.
This fixes a bug where the device is unable to connect after
rebooting:
wlp3s0f3u2: send auth to ... (try 1/3)
wlp3s0f3u2: send auth to ... (try 2/3)
wlp3s0f3u2: send auth to ... (try 3/3)
wlp3s0f3u2: authentication with ... timed out
Rebooting leaves the device powered on (partially? at least the
firmware is still running), but not really in a working state.
Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/4eb111a9-d4c4-37d0-b376-4e202de7153c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63cfd210034c772fad047afa13dd5a4664b0a72e upstream.
There are two pointers in struct xfrm_dev_offload, *dev, *real_dev.
The *dev points whether bonding interface or real interface, if
bonding IPsec offload is used, it points bonding interface; if not,
it points real interface. And *real_dev always points real interface.
So nfp should always use real_dev instead of dev.
Prior to this change the system becomes unresponsive when offloading
IPsec for a device which is a lower device to a bonding device.
Fixes: 859a497fe80c ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer")
CC: stable@vger.kernel.org
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20230420140125.38521-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74ad37a30ffee3643bc34f9ca7225b20a66abaaf upstream.
Multiple IPI channels are mapped to same interrupt handler.
Current isr implementation handles only one channel per isr.
Fix this behavior by checking isr status bit of all child
mailbox nodes.
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230311012407.1292118-3-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81c18e08a609706c5c2887f267135fa0dece4119 upstream.
If the unit address is appended to node name of memory-region,
then adding rproc carveouts fails as node name and unit-address
both are passed as carveout name (i.e. vdev0vring0@xxxxxxxx). However,
only node name is expected by remoteproc framework. This patch moves
memory-region node parsing from driver probe to prepare and
only passes node-name and not unit-address
Fixes: 6b291e8020a8 ("drivers: remoteproc: Add Xilinx r5 remoteproc driver")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230311012407.1292118-5-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
address mode
commit 37513c56139b79dd43c1774513c28f8ab2b05224 upstream.
The bug was obswerved while reading code. There are not many users of
addr_mode_nbytes. Anyway, we should update the flash's current address
mode when changing the address mode, fix it. We don't care for now about
the set_4byte_addr_mode(nor, false) from spi_nor_restore(), as it is
used at driver remove and shutdown.
Fixes: d7931a215063 ("mtd: spi-nor: core: Track flash's internal address mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230331074606.3559258-9-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e0489f6e221f5ddee6cb3bd51b992b790c5fa4b9 upstream.
If mtd_otp_nvmem_add() fails, the partitions won't be removed
because there is simply no call to del_mtd_partitions().
Unfortunately, add_mtd_partitions() will print all partitions to
the kernel console. If mtd_otp_nvmem_add() returns -EPROBE_DEFER
this would print the partitions multiple times to the kernel
console. Instead move mtd_otp_nvmem_add() to the beginning of the
function.
Fixes: 4b361cfa8624 ("mtd: core: add OTP nvmem provider support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-3-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8bd1d24e6ca3c599dd455b0e1b22f77bab8290eb upstream.
The master MTD will only have an associated device if
CONFIG_MTD_PARTITIONED_MASTER is set, thus we cannot use dev_err() on
mtd->dev. Instead use the parent device which is the physical flash
memory.
Fixes: 4b361cfa8624 ("mtd: core: add OTP nvmem provider support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-2-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1cd9ceaa5282ff10ea20a7fbadde5a476a1cc99e upstream.
Commit c048b60d39e1 ("mtd: core: provide unique name for nvmem device")
tries to give the nvmem device a unique name, but fails badly if the mtd
device doesn't have a "struct device" associated with it, i.e. if
CONFIG_MTD_PARTITIONED_MASTER is not set. This will result in the name
"(null)-user-otp", which is not unique. It seems the best we can do is
to use the compatible name together with a unique identifier added by
the nvmem subsystem by using NVMEM_DEVID_AUTO.
Fixes: c048b60d39e1 ("mtd: core: provide unique name for nvmem device")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-1-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc05e06e6098ca2c28f7a10da0e00aeea20fa59e upstream.
Commit 7e55c60acfbb ("md/raid5: Pivot raid5_make_request()") changed the
order in which requests for underlying disks are created. Since for
large sequential IO adding of requests frequently races with md_raid5
thread submitting bios to underlying disks, this results in a change in
IO pattern because intermediate states of new order of request creation
result in more smaller discontiguous requests. For RAID5 on top of three
rotational disks our performance testing revealed this results in
regression in write throughput:
iozone -a -s 131072000 -y 4 -q 8 -i 0 -i 1 -R
before 7e55c60acfbb:
KB reclen write rewrite read reread
131072000 4 493670 525964 524575 513384
131072000 8 540467 532880 512028 513703
after 7e55c60acfbb:
KB reclen write rewrite read reread
131072000 4 421785 456184 531278 509248
131072000 8 459283 456354 528449 543834
To reduce the amount of discontiguous requests we can start generating
requests with the stripe with the lowest chunk offset as that has the
best chance of being adjacent to IO queued previously. This improves the
performance to:
KB reclen write rewrite read reread
131072000 4 497682 506317 518043 514559
131072000 8 514048 501886 506453 504319
restoring big part of the regression.
Fixes: 7e55c60acfbb ("md/raid5: Pivot raid5_make_request()")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230417171537.17899-1-jack@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a405c6f0229526160aa3f177f65e20c86fce84c5 upstream.
init_resync() inits mempool and sets conf->have_replacemnt at the beginning
of sync, close_sync() frees the mempool when sync is completed.
After [1] recovery might be skipped and init_resync() is called but
close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio.
The following is one way to reproduce the issue.
1) create a array, wait for resync to complete, mddev->recovery_cp is set
to MaxSector.
2) recovery is woken and it is skipped. conf->have_replacement is set to
0 in init_resync(). close_sync() not called.
3) some io errors and rdev A is set to WantReplacement.
4) a new device is added and set to A's replacement.
5) recovery is woken, A have replacement, but conf->have_replacemnt is
0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref
occurs.
Fix it by not calling init_resync() if recovery skipped.
[1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Fixes: 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Cc: stable@vger.kernel.org
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230222041000.3341651-3-linan666@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3899d94e3831ee07ea6821c032dc297aec80586a upstream.
When we receive a flush command (or "barrier" in DRBD), we currently use
a REQ_OP_FLUSH with the REQ_PREFLUSH flag set.
The correct way to submit a flush bio is by using a REQ_OP_WRITE without
any data, and set the REQ_PREFLUSH flag.
Since commit b4a6bb3a67aa ("block: add a sanity check for non-write
flush/fua bios"), this triggers a warning in the block layer, but this
has been broken for quite some time before that.
So use the correct set of flags to actually make the flush happen.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@vger.kernel.org
Fixes: f9ff0da56437 ("drbd: allow parallel flushes for multi-volume resources")
Reported-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9b04d99788cf475cbd277f30ec66230ccb7e99f4 ]
The CPR3 power resource on the Toshiba Click Mini toggles a GPIO
which is called SISP (for SIS touchscreen power?) on/off.
This CPR3 power resource is not listed in any _PR? lists, let alone
in a _PR0 list for the SIS0817 touchscreen ACPI device which needs it.
Before commit a1224f34d72a ("ACPI: PM: Check states of power resources
during initialization") this was not an issue because since nothing
referenced the CPR3 power resource its state was always
ACPI_POWER_RESOURCE_STATE_UNKNOWN and power resources with this state
get ignored by acpi_turn_off_unused_power_resources().
This clearly is a bug in the DSDT of this device. Add a DMI quirk
to make acpi_turn_off_unused_power_resources() a no-op on this
model to fix the touchscreen no longer working since kernel 5.16 .
This quirk also causes 2 other power resources to not get turned
off, but the _OFF method on these already was a no-op, so this makes
no difference for the other 2 power resources.
Fixes: a1224f34d72a ("ACPI: PM: Check states of power resources during initialization")
Reported-by: Gé Koerkamp <ge.koerkamp@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216946
Link: https://lore.kernel.org/regressions/32a14a8a-9795-4c8c-7e00-da9012f548f8@leemhuis.info/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e078180d66848a6a890daf0a3ce28dc43cc66790 ]
The "map_sz" is the number of elements in the "m" array so the >
comparison needs to be changed to >= to prevent an out of bounds
read.
Fixes: 09574cca6ad6 ("hte: Add Tegra194 HTE kernel provider")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6680c835ada1b34e882d0a32612f7294c62e27e0 ]
Without the extra #include, this driver produces a build failure
in some configurations.
drivers/hte/hte-tegra194-test.c:96:34: error: array type has incomplete element type 'struct of_device_id'
96 | static const struct of_device_id tegra_hte_test_of_match[] = {
Fixes: 9a75a7cd03c9 ("hte: Add Tegra HTE test driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 972c91fd7beddc3f19c8c855f6e60e7dbd435cbd ]
This patch adds missing MODULE_DEVICE_TABLE definition
which generates correct modalias for automatic loading
of this driver when it is built as a module.
Fixes: 3f65555c417c ("mfd: arizona: Split of_match table into I2C and SPI versions")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230323134138.834369-1-ckeepax@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f0484d2f80a72022b7fac72bcb406392900ef1eb ]
Ocelot chips (VSC7511, VSC7512, VSC7513, VSC7514) don't support bulk read
operations over SPI.
Many SPI buses have hardware that can optimize consecutive reads.
Essentially an address is written to the chip, and if the SPI controller
continues to toggle the clock, subsequent register values are reported.
This can lead to significant optimizations, because the time between
"address is written to the chip" and "chip starts to report data" can often
take a fixed amount of time.
When support for Ocelot chips were added in commit f3e893626abe ("mfd:
ocelot: Add support for the vsc7512 chip via spi") it was believed that
this optimization was supported. However it is not.
Most register transactions with the Ocelot chips are not done in bulk, so
this bug could go unnoticed. The one scenario where bulk register
operations _are_ performed is when polling port statistics counters, which
was added in commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for
stats").
Things get slightly more complicated here...
A bug was introduced in commit d4c367650704 ("net: mscc: ocelot: keep
ocelot_stat_layout by reg address, not offset") that broke the optimization
of bulk reads. This means that when Ethernet support for the VSC7512 chip
was added in commit 3d7316ac81ac ("net: dsa: ocelot: add external ocelot
switch control") things were actually working "as expected".
The bulk read opmtimization was discovered, and fixed in commit
6acc72a43eac ("net: mscc: ocelot: fix stats region batching") and the
timing optimizations for SPI were noticed. A bulk read went from ~14ms to
~2ms. But this timing improvement came at the cost of every register
reading zero due the fact that bulk reads don't work.
The read timings increase back to 13-14ms, but that's a price worth paying
in order to receive valid data. This is verified in a DSA setup (cpsw-new
switch tied to port 0 on the VSC7512, after having been running overnight)
Rx Octets: 16222055 # Counters from CPSW switch
Tx Octets: 12034702
Net Octets: 28256757
p00_rx_octets: 12034702 # Counters from Ocelot switch
p00_rx_frames_below_65_octets: 0
p00_rx_frames_65_to_127_octets: 88188
p00_rx_frames_128_to_255_octets: 13
p00_rx_frames_256_to_511_octets: 0
p00_rx_frames_512_to_1023_octets: 0
p00_rx_frames_over_1526_octets: 3306
p00_tx_octets: 16222055
Fixes: f3e893626abe ("mfd: ocelot: Add support for the vsc7512 chip via spi")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230322141130.2531256-1-colin.foster@in-advantage.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f376c479668557bcc2fd9e9fbc0f53e7819a11cd ]
It seems that this driver was developed based on preliminary documentation.
Report the correct names for all TQMxE39x variants, as they are used by
the released hardware revisions:
- Fix names for TQMxE39C1/C2 board IDs
- Distinguish TQMxE39M and TQMxE39S, which use the same board ID
The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate
Uses Configuration) register of the GPIO controller. This also prepares
for the correct handling of the differences between the GPIO controllers
of our COMe and SMARC modules.
Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/aca9a7cb42a85181bcb456c437554d2728e708ec.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 051c69ff4f607aa114c7bbdd7c41ed881367aeee ]
Registers 0x160..0x17f are unassigned. Use 0x180 as base register and
update offets accordingly.
Also change the size of the range to include 0x19f. While 0x19f is
currently reserved for future extensions, so are several of the previous
registers up to 0x19e, and it is weird to leave out just the last one.
Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/db4677ac318b1283c8956f637f409995a30a31c3.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1be1b23696b3d4b0231c694f5e0767b4471d33a9 ]
The I2C_DETECT register is at IO port 0x1a7, which is outside the range
passed to devm_ioport_map() for io_base, and was only working because
there aren't actually any bounds checks for IO port accesses.
Extending the range does not seem like a good solution here, as it would
then conflict with the IO resource assigned to the I2C controller. As
this is just a one-off access during probe, use a simple inb() instead.
While we're at it, drop the unused define TQMX86_REG_I2C_INT_EN.
Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
mtk_thermal_probe
[ Upstream commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26 ]
Smatch reports:
1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released.
2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released.
The original code forgets to release iomap resource when handling errors,
fix it by switch to devm_of_iomap.
Fixes: 89945047b166 ("thermal: mediatek: Add tsensor support for V2 thermal system")
Signed-off-by: Kang Chen <void0red@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230419020749.621257-1-void0red@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7badd752de05312fdb1aeb388480f706d0c087f ]
In the past setting the pin direction called pinctrl_gpio_direction()
which uses a mutex to serialize this. That was changed to set the
direction directly in the pin controller driver, but that lost the
serialization mechanism. Since the direction of multiple pins are in
the same register you can have a race condition, something that was
in fact observed with the cec-gpio driver.
Add a new spinlock to serialize writing to the FSEL registers.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 1a4541b68e25 ("pinctrl-bcm2835: don't call pinctrl_gpio_direction()")
Link: https://lore.kernel.org/r/4302b66b-ca20-0f19-d2aa-ee8661118863@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8435befd81dd85b7b610598551fadf675849bc1 ]
Do not global enable all the cyclic channels in at_xdmac_resume(). Instead
save the global status in at_xdmac_suspend() and re-enable the cyclic
channel only if it was active before suspend.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-6-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 970b17dfe264a9085ba4e593730ecfd496b950ab ]
The issue_pending request is ignored while driver is processing a DMA
request. Fix to issue the pending requests on any dma channel status.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-2-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a251994a441ee0a69ba7062c8cd2d08ead3db379 ]
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 91d6a468e335571f1e67e046050dea9af5fa4ebe ]
gpi_ch_init() doesn't lock the ctrl_lock mutex, so there is no need to
unlock it too. Instead the mutex is handled by the function
gpi_alloc_chan_resources(), which properly locks and unlocks the mutex.
=====================================
WARNING: bad unlock balance detected!
6.3.0-rc5-00253-g99792582ded1-dirty #15 Not tainted
-------------------------------------
kworker/u16:0/9 is trying to release lock (&gpii->ctrl_lock) at:
[<ffffb99d04e1284c>] gpi_alloc_chan_resources+0x108/0x5bc
but there are no more locks to release!
other info that might help us debug this:
6 locks held by kworker/u16:0/9:
#0: ffff575740010938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x220/0x594
#1: ffff80000809bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x220/0x594
#2: ffff575740f2a0f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188
#3: ffff57574b5570f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188
#4: ffffb99d06a2f180 (of_dma_lock){+.+.}-{3:3}, at: of_dma_request_slave_channel+0x138/0x280
#5: ffffb99d06a2ee20 (dma_list_mutex){+.+.}-{3:3}, at: dma_get_slave_channel+0x28/0x10c
stack backtrace:
CPU: 7 PID: 9 Comm: kworker/u16:0 Not tainted 6.3.0-rc5-00253-g99792582ded1-dirty #15
Hardware name: Google Pixel 3 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0xa0/0xfc
show_stack+0x18/0x24
dump_stack_lvl+0x60/0xac
dump_stack+0x18/0x24
print_unlock_imbalance_bug+0x130/0x148
lock_release+0x270/0x300
__mutex_unlock_slowpath+0x48/0x2cc
mutex_unlock+0x20/0x2c
gpi_alloc_chan_resources+0x108/0x5bc
dma_chan_get+0x84/0x188
dma_get_slave_channel+0x5c/0x10c
gpi_of_dma_xlate+0x110/0x1a0
of_dma_request_slave_channel+0x174/0x280
dma_request_chan+0x3c/0x2d4
geni_i2c_probe+0x544/0x63c
platform_probe+0x68/0xc4
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
device_add+0x60c/0x7d8
of_device_add+0x44/0x60
of_platform_device_create_pdata+0x90/0x124
of_platform_bus_create+0x15c/0x3c8
of_platform_populate+0x58/0xf8
devm_of_platform_populate+0x58/0xbc
geni_se_probe+0xf0/0x164
platform_probe+0x68/0xc4
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x2bc/0x594
worker_thread+0x228/0x438
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230409233355.453741-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57c0e1362fdd57d0cea7ab1e583b58abf4bd8c2d ]
In the wiz_mode_select() function, the configuration performed for
PHY_TYPE_USXGMII is unreachable. Fix it.
Fixes: b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230403094552.929108-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
ulpi_port
[ Upstream commit e024854048e733391b31fe5a398704b31b9af803 ]
The tegra_xusb_port_unregister should be called when usb2_port
and ulpi_port map fails in tegra_xusb_add_usb2_port() or in
tegra_xusb_add_ulpi_port(), fix it.
Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221129111634.1547747-1-cuigaosheng1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a0d1740bd8fd7dafb81fcb102fb5d0b83b1ce73 ]
The existing code copies the hw_params pointer and reuses it later in
.prepare, specifically to re-initialize the ALH DMA channel
information that's lost in suspend-resume cycles.
This is not needed, we can directly access the information from the
substream/rtd - as done for the HDAudio DAIs in
sound/soc/sof/intel/hda-dai.c
In addition, using the saved pointer causes the suspend-resume test
cases to fail on specific platforms, depending on which version of GCC
is used. Péter Ujfalusi and I have spent long hours to root-cause this
problem that was reported by the Intel CI first with 6.2-rc1 and again
v6.3-rc1. In the latter case we were lucky that the problem was 100%
reproducible on local test devices, and found out that adding a
dev_dbg() or adding a call to usleep_range() just before accessing the
saved pointer "fixed" the issue. With errors appearing just by
changing the compiler version or minor changes in the code generated,
clearly we have a memory management Heisenbug.
The root-cause seems to be that the hw_params pointer is not
persistent. The soc-pcm code allocates the hw_params structure on the
stack, and passes it to the BE dailink hw_params and DAIs
hw_params. Saving such a pointer and reusing it later during the
.prepare stage cannot possibly work reliably, it's broken-by-design
since v5.10. It's astonishing that the problem was not seen earlier.
This simple fix will have to be back-ported to -stable, due to changes
to avoid the use of the get/set_dmadata routines this patch will only
apply on kernels older than v6.1.
Fixes: a5a0239c27fe ("soundwire: intel: reinitialize IP+DSP in .prepare(), but only when resuming")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230321022642.1426611-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b16c310115f2084b8826a35b77ef42bab6786d9f ]
The DISP_PWM controller's default behavior is to always use register
double buffering: all reads/writes are then performed on shadow
registers instead of working registers and this becomes an issue
in case our chosen configuration in Linux is different from the
default (or from the one that was pre-applied by the bootloader).
An example of broken behavior is when the controller is configured
to use shadow registers, but this driver wants to configure it
otherwise: what happens is that the .get_state() callback is called
right after registering the pwmchip and checks whether the PWM is
enabled by reading the DISP_PWM_EN register;
At this point, if shadow registers are enabled but their content
was not committed before booting Linux, we are *not* reading the
current PWM enablement status, leading to the kernel knowing that
the hardware is actually enabled when, in reality, it's not.
The aforementioned issue emerged since this driver was fixed with
commit 0b5ef3429d8f ("pwm: mtk-disp: Fix the parameters calculated
by the enabled flag of disp_pwm") making it to read the enablement
status from the right register.
Configure the controller in the .get_state() callback to avoid
this desync issue and get the backlight properly working again.
Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36dd7f530ae7d9ce9e853ffb8aa337de65c6600b ]
If shadow registers usage is not desired, disable that before performing
any write to CON0/1 registers in the .apply() callback, otherwise we may
lose clkdiv or period/width updates.
Fixes: cd4b45ac449a ("pwm: Add MediaTek MT2701 display PWM driver support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1087c29e96a48e9080377e168d35dcb52fb068b ]
Commit 96f524105b9c ("leds: tca6507: use fwnode API instead of OF")
changed to fwnode API but did not take into account that a missing property
"linux,default-trigger" now seems to return an error and as a side effect
sets value to -1. This seems to be different from of_get_property() which
always returned NULL in any case of error.
Neglecting this side-effect leads to
[ 11.201965] Unable to handle kernel paging request at virtual address ffffffff when read
in the strcmp() of led_trigger_set_default() if there is no led-trigger
defined in the DTS.
I don't know if this was recently introduced somewhere in the fwnode lib
or if the effect was missed in initial testing. Anyways it seems to be a
bug to ignore the error return value of an optional value here in the
driver.
Fixes: 96f524105b9c ("leds: tca6507: use fwnode API instead of OF")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/cbae7617db83113de726fcc423a805ebaa1bfca6.1680433978.git.hns@goldelico.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 827026ae2e56ec05ef1155661079badbbfc0b038 ]
If the probe is deferred, -EPROBE_DEFER should be returned, not
+EPROBE_DEFER.
Fixes: 3cd2c313f1d6 ("dmaengine: mv_xor_v2: Fix clock resource by adding a register clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/201170dff832a3c496d125772e10070cd834ebf2.1679814350.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c19147d9cfc0f9328049d2e278279150d7de9ca ]
There have been stable releases with the ralink,rt2880-pinmux compatible
string included. Having it removed breaks the ABI. Reintroduce it.
Fixes: e5981cd46183 ("pinctrl: ralink: add new compatible strings for each pinctrl subdriver")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230317213011.13656-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a61079efc87888587e463afaed82417b162fbd69 ]
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: 3fce8e1eb994 ("leds: TI LMU: Add common code for TI LMU devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230226053953.4681-5-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
