summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2022-06-14mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064NTokunori Ikegami
commit 0a8e98305f63deaf0a799d5cf5532cc83af035d1 upstream. Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") buffered writes fail on S29GL064N. This is because, on S29GL064N, reads return 0xFF at the end of DQ polling for write completion, where as, chip_good() check expects actual data written to the last location to be returned post DQ polling completion. Fix is to revert to using chip_good() for S29GL064N which only checks for DQ lines to settle down to determine write completion. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Cc: stable@vger.kernel.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14nodemask: Fix return values to be unsignedKees Cook
[ Upstream commit 0dfe54071d7c828a02917b595456bfde1afdddc9 ] The nodemask routines had mixed return values that provided potentially signed return values that could never happen. This was leading to the compiler getting confusing about the range of possible return values (it was thinking things could be negative where they could not be). Fix all the nodemask routines that should be returning unsigned (or bool) values. Silences: mm/swapfile.c: In function ‘setup_swap_info’: mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds of ‘struct plist_node[]’ [-Werror=array-bounds] 2291 | p->avail_lists[i].prio = 1; | ~~~~~~~~~~~~~~^~~ In file included from mm/swapfile.c:16: ./include/linux/swap.h:292:27: note: while referencing ‘avail_lists’ 292 | struct plist_node avail_lists[]; /* | ^~~~~~~~~~~ Reported-by: Christophe de Dinechin <dinechin@redhat.com> Link: https://lore.kernel.org/lkml/20220414150855.2407137-3-dinechin@redhat.com/ Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Yury Norov <yury.norov@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14nodemask.h: fix compilation error with GCC12Christophe de Dinechin
commit 37462a920392cb86541650a6f4121155f11f1199 upstream. With gcc version 12.0.1 20220401 (Red Hat 12.0.1-0), building with defconfig results in the following compilation error: | CC mm/swapfile.o | mm/swapfile.c: In function `setup_swap_info': | mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds | of `struct plist_node[]' [-Werror=array-bounds] | 2291 | p->avail_lists[i].prio = 1; | | ~~~~~~~~~~~~~~^~~ | In file included from mm/swapfile.c:16: | ./include/linux/swap.h:292:27: note: while referencing `avail_lists' | 292 | struct plist_node avail_lists[]; /* | | ^~~~~~~~~~~ This is due to the compiler detecting that the mask in node_states[__state] could theoretically be zero, which would lead to first_node() returning -1 through find_first_bit. I believe that the warning/error is legitimate. I first tried adding a test to check that the node mask is not emtpy, since a similar test exists in the case where MAX_NUMNODES == 1. However, adding the if statement causes other warnings to appear in for_each_cpu_node_but, because it introduces a dangling else ambiguity. And unfortunately, GCC is not smart enough to detect that the added test makes the case where (node) == -1 impossible, so it still complains with the same message. This is why I settled on replacing that with a harmless, but relatively useless (node) >= 0 test. Based on the warning for the dangling else, I also decided to fix the case where MAX_NUMNODES == 1 by moving the condition inside the for loop. It will still only be tested once. This ensures that the meaning of an else following for_each_node_mask or derivatives would not silently have a different meaning depending on the configuration. Link: https://lkml.kernel.org/r/20220414150855.2407137-3-dinechin@redhat.com Signed-off-by: Christophe de Dinechin <christophe@dinechin.org> Signed-off-by: Christophe de Dinechin <dinechin@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Segall <bsegall@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14mailbox: forward the hrtimer if not queued and under a lockBjörn Ardö
[ Upstream commit bca1a1004615efe141fd78f360ecc48c60bc4ad5 ] This reverts commit c7dacf5b0f32957b24ef29df1207dc2cd8307743, "mailbox: avoid timer start from callback" The previous commit was reverted since it lead to a race that caused the hrtimer to not be started at all. The check for hrtimer_active() in msg_submit() will return true if the callback function txdone_hrtimer() is currently running. This function could return HRTIMER_NORESTART and then the timer will not be restarted, and also msg_submit() will not start the timer. This will lead to a message actually being submitted but no timer will start to check for its compleation. The original fix that added checking hrtimer_active() was added to avoid a warning with hrtimer_forward. Looking in the kernel another solution to avoid this warning is to check hrtimer_is_queued() before calling hrtimer_forward_now() instead. This however requires a lock so the timer is not started by msg_submit() inbetween this check and the hrtimer_forward() call. Fixes: c7dacf5b0f32 ("mailbox: avoid timer start from callback") Signed-off-by: Björn Ardö <bjorn.ardo@axis.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()Gustavo A. R. Silva
[ Upstream commit 54db804d5d7d36709d1ce70bde3b9a6c61b290b6 ] Fix the following Wstringop-overflow warnings when building with GCC-11: drivers/scsi/fcoe/fcoe.c: In function ‘fcoe_netdev_config’: drivers/scsi/fcoe/fcoe.c:744:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 744 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, 1, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/fcoe/fcoe.c:744:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/fcoe/fcoe.c:36: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/fcoe/fcoe.c:747:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 747 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 748 | 2, 0); | ~~~~~ drivers/scsi/fcoe/fcoe.c:747:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/fcoe/fcoe.c:36: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ CC drivers/scsi/bnx2fc/bnx2fc_io.o In function ‘bnx2fc_net_config’, inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 833 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 834 | 1, 0); | ~~~~~ drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/bnx2fc/bnx2fc.h:53, from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ In function ‘bnx2fc_net_config’, inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 839 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 840 | 2, 0); | ~~~~~ drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/bnx2fc/bnx2fc.h:53, from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’: drivers/scsi/qedf/qedf_main.c:3520:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 3520 | qedf->wwnn = fcoe_wwn_from_mac(qedf->mac, 1, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3520:30: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/qedf/qedf.h:9, from drivers/scsi/qedf/qedf_main.c:23: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3521:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 3521 | qedf->wwpn = fcoe_wwn_from_mac(qedf->mac, 2, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3521:30: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/qedf/qedf.h:9, from drivers/scsi/qedf/qedf_main.c:23: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ by changing the array size to the correct value of ETH_ALEN in the argument declaration. Also, fix a couple of checkpatch warnings: WARNING: function definition argument 'unsigned int' should also have an identifier name This helps with the ongoing efforts to globally enable -Wstringop-overflow. Link: https://github.com/KSPP/linux/issues/181 Fixes: 85b4aa4926a5 ("[SCSI] fcoe: Fibre Channel over Ethernet") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14efi: Add missing prototype for efi_capsule_setup_infoJan Kiszka
[ Upstream commit aa480379d8bdb33920d68acfd90f823c8af32578 ] Fixes "no previous declaration for 'efi_capsule_setup_info'" warnings under W=1. Fixes: 2959c95d510c ("efi/capsule: Add support for Quark security header") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/r/c28d3f86-dd72-27d1-e2c2-40971b8da6bd@siemens.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14drm: fix EDID struct for old ARM OABI formatLinus Torvalds
[ Upstream commit 47f15561b69e226bfc034e94ff6dbec51a4662af ] When building the kernel for arm with the "-mabi=apcs-gnu" option, gcc will force alignment of all structures and unions to a word boundary (see also STRUCTURE_SIZE_BOUNDARY and the "-mstructure-size-boundary=XX" option if you're a gcc person), even when the members of said structures do not want or need said alignment. This completely messes up the structure alignment of 'struct edid' on those targets, because even though all the embedded structures are marked with "__attribute__((packed))", the unions that contain them are not. This was exposed by commit f1e4c916f97f ("drm/edid: add EDID block count and size helpers"), but the bug is pre-existing. That commit just made the structure layout problem cause a build failure due to the addition of the BUILD_BUG_ON(sizeof(*edid) != EDID_LENGTH); sanity check in drivers/gpu/drm/drm_edid.c:edid_block_data(). This legacy union alignment should probably not be used in the first place, but we can fix the layout by adding the packed attribute to the union entries even when each member is already packed and it shouldn't matter in a sane build environment. You can see this issue with a trivial test program: union { struct { char c[5]; }; struct { char d; unsigned e; } __attribute__((packed)); } a = { "1234" }; where building this with a normal "gcc -S" will result in the expected 5-byte size of said union: .type a, @object .size a, 5 but with an ARM compiler and the old ABI: arm-linux-gnu-gcc -mabi=apcs-gnu -mfloat-abi=soft -S t.c you get .type a, %object .size a, 8 instead, because even though each member of the union is packed, the union itself still gets aligned. This was reported by Sudip for the spear3xx_defconfig target. Link: https://lore.kernel.org/lkml/YpCUzStDnSgQLNFN@debian/ Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolateVasily Averin
[ Upstream commit 2b132903de7124dd9a758be0c27562e91a510848 ] Fixes following sparse warnings: CHECK mm/vmscan.c mm/vmscan.c: note: in included file (through include/trace/trace_events.h, include/trace/define_trace.h, include/trace/events/vmscan.h): ./include/trace/events/vmscan.h:281:1: sparse: warning: cast to restricted isolate_mode_t ./include/trace/events/vmscan.h:281:1: sparse: warning: restricted isolate_mode_t degrades to integer Link: https://lkml.kernel.org/r/e85d7ff2-fd10-53f8-c24e-ba0458439c1b@openvz.org Signed-off-by: Vasily Averin <vvs@openvz.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14ALSA: jack: Access input_dev under mutexAmadeusz Sławiński
[ Upstream commit 1b6a6fc5280e97559287b61eade2d4b363e836f2 ] It is possible when using ASoC that input_dev is unregistered while calling snd_jack_report, which causes NULL pointer dereference. In order to prevent this serialize access to input_dev using mutex lock. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220412091628.3056922-1-amadeuszx.slawinski@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEPEric W. Biederman
commit 4a3d2717d140401df7501a95e454180831a0c5af upstream. xtensa is the last user of the PT_SINGLESTEP flag. Changing tsk->ptrace in user_enable_single_step and user_disable_single_step without locking could potentiallly cause problems. So use a thread info flag instead of a flag in tsk->ptrace. Use TIF_SINGLESTEP that xtensa already had defined but unused. Remove the definitions of PT_SINGLESTEP and PT_BLOCKSTEP as they have no more users. Cc: stable@vger.kernel.org Acked-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Link: https://lkml.kernel.org/r/20220505182645.497868-4-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06netfilter: conntrack: re-fetch conntrack after insertionFlorian Westphal
commit 56b14ecec97f39118bf85c9ac2438c5a949509ed upstream. In case the conntrack is clashing, insertion can free skb->_nfct and set skb->_nfct to the already-confirmed entry. This wasn't found before because the conntrack entry and the extension space used to free'd after an rcu grace period, plus the race needs events enabled to trigger. Reported-by: <syzbot+793a590957d9c1b96620@syzkaller.appspotmail.com> Fixes: 71d8c47fc653 ("netfilter: conntrack: introduce clash resolution on insertion race") Fixes: 2ad9d7747c10 ("netfilter: conntrack: free extension area immediately") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-06secure_seq: use the 64 bits of the siphash for port offset calculationWilly Tarreau
commit b2d057560b8107c633b39aabe517ff9d93f285e3 upstream. SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit 7cd23e5300c1 ("secure_seq: use SipHash in place of MD5"), but the output remained truncated to 32-bit only. In order to exploit more bits from the hash, let's make the functions return the full 64-bit of siphash_3u32(). We also make sure the port offset calculation in __inet_hash_connect() remains done on 32-bit to avoid the need for div_u64_rem() and an extra cost on 32-bit systems. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> [SG: Adjusted context] Signed-off-by: Stefan Ghinea <stefan.ghinea@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""Linus Torvalds
commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 upstream. Halil Pasic points out [1] that the full revert of that commit (revert in bddac7c1e02b), and that a partial revert that only reverts the problematic case, but still keeps some of the cleanups is probably better.  And that partial revert [2] had already been verified by Oleksandr Natalenko to also fix the issue, I had just missed that in the long discussion. So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb: rework "fix info leak with DMA_FROM_DEVICE""), and effectively only revert the part that caused problems. Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1] Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2] Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3] Suggested-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Christoph Hellwig" <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [OP: backport to 4.14: apply swiotlb_tbl_map_single() changes in lib/swiotlb.c] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25swiotlb: fix info leak with DMA_FROM_DEVICEHalil Pasic
commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e upstream. The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [OP: backport to 4.14: apply swiotlb_tbl_map_single() changes in lib/swiotlb.c] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18net: Fix features skip in for_each_netdev_feature()Tariq Toukan
[ Upstream commit 85db6352fc8a158a893151baa1716463d34a20d0 ] The find_next_netdev_feature() macro gets the "remaining length", not bit index. Passing "bit - 1" for the following iteration is wrong as it skips the adjacent bit. Pass "bit" instead. Fixes: 3b89ea9c5902 ("net: Fix for_each_netdev_feature on Big endian") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20220504080914.1918-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-15ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lockTakashi Iwai
commit bc55cfd5718c7c23e5524582e9fa70b4d10f2433 upstream. syzbot caught a potential deadlock between the PCM runtime->buffer_mutex and the mm->mmap_lock. It was brought by the recent fix to cover the racy read/write and other ioctls, and in that commit, I overlooked a (hopefully only) corner case that may take the revert lock, namely, the OSS mmap. The OSS mmap operation exceptionally allows to re-configure the parameters inside the OSS mmap syscall, where mm->mmap_mutex is already held. Meanwhile, the copy_from/to_user calls at read/write operations also take the mm->mmap_lock internally, hence it may lead to a AB/BA deadlock. A similar problem was already seen in the past and we fixed it with a refcount (in commit b248371628aa). The former fix covered only the call paths with OSS read/write and OSS ioctls, while we need to cover the concurrent access via both ALSA and OSS APIs now. This patch addresses the problem above by replacing the buffer_mutex lock in the read/write operations with a refcount similar as we've used for OSS. The new field, runtime->buffer_accessing, keeps the number of concurrent read/write operations. Unlike the former buffer_mutex protection, this protects only around the copy_from/to_user() calls; the other codes are basically protected by the PCM stream lock. The refcount can be a negative, meaning blocked by the ioctls. If a negative value is seen, the read/write aborts with -EBUSY. In the ioctl side, OTOH, they check this refcount, too, and set to a negative value for blocking unless it's already being accessed. Reported-by: syzbot+6e5c88838328e99c7e1c@syzkaller.appspotmail.com Fixes: dca947d4d26d ("ALSA: pcm: Fix races among concurrent read/write and buffer changes") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000381a0d05db622a81@google.com Link: https://lore.kernel.org/r/20220330120903.4738-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> [OP: backport to 4.14: adjusted context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15ALSA: pcm: Fix races among concurrent hw_params and hw_free callsTakashi Iwai
commit 92ee3c60ec9fe64404dc035e7c41277d74aa26cb upstream. Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls. This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-check block) for code simplicity. Reported-by: Hu Jiahui <kirin.say@gmail.com> Cc: <stable@vger.kernel.org> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20220322170720.3529-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> [OP: backport to 4.14: adjusted context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15Bluetooth: Fix the creation of hdev->nameItay Iellin
commit 103a2f3255a95991252f8f13375c3a96a75011cd upstream. Set a size limit of 8 bytes of the written buffer to "hdev->name" including the terminating null byte, as the size of "hdev->name" is 8 bytes. If an id value which is greater than 9999 is allocated, then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)" function call would lead to a truncation of the id value in decimal notation. Set an explicit maximum id parameter in the id allocation function call. The id allocation function defines the maximum allocated id value as the maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined as 10000. Signed-off-by: Itay Iellin <ieitayie@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWATEric Dumazet
[ Upstream commit 4bfe744ff1644fbc0a991a2677dc874475dd6776 ] I had this bug sitting for too long in my pile, it is time to fix it. Thanks to Doug Porter for reminding me of it! We had various attempts in the past, including commit 0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"), but the issue is that TCP stack currently only generates EPOLLOUT from input path, when tp->snd_una has advanced and skb(s) cleaned from rtx queue. If a flow has a big RTT, and/or receives SACKs, it is possible that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0 and no more data can be sent until tp->snd_una finally advances. What is needed is to also check if POLLOUT needs to be generated whenever tp->snd_nxt is advanced, from output path. This bug triggers more often after an idle period, as we do not receive ACK for at least one RTT. tcp_notsent_lowat could be a fraction of what CWND and pacing rate would allow to send during this RTT. In a followup patch, I will remove the bogus call to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED) from tcp_check_space(). Fact that we have decided to generate an EPOLLOUT does not mean the application has immediately refilled the transmit queue. This optimistic call might have been the reason the bug seemed not too serious. Tested: 200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2] $ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat $ cat bench_rr.sh SUM=0 for i in {1..10} do V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"` echo $V SUM=$(($SUM + $V)) done echo SUM=$SUM Before patch: $ bench_rr.sh 130000000 80000000 140000000 140000000 140000000 140000000 130000000 40000000 90000000 110000000 SUM=1140000000 After patch: $ bench_rr.sh 430000000 590000000 530000000 450000000 450000000 350000000 450000000 490000000 480000000 460000000 SUM=4680000000 # This is 410 % of the value before patch. Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Doug Porter <dsp@fb.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12hex2bin: make the function hex_to_bin constant-timeMikulas Patocka
commit e5be15767e7e284351853cbaba80cde8620341fb upstream. The function hex2bin is used to load cryptographic keys into device mapper targets dm-crypt and dm-integrity. It should take constant time independent on the processed data, so that concurrently running unprivileged code can't infer any information about the keys via microarchitectural convert channels. This patch changes the function hex_to_bin so that it contains no branches and no memory accesses. Note that this shouldn't cause performance degradation because the size of the new function is the same as the size of the old function (on x86-64) - and the new function causes no branch misprediction penalties. I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64 i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32 sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64 powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are no branches in the generated code. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27ax25: fix reference count leaks of ax25_devDuoming Zhou
commit 87563a043cef044fed5db7967a75741cc16ad2b1 upstream. The previous commit d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs") introduces refcount into ax25_dev, but there are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(), ax25_rt_add(), ax25_rt_del() and ax25_rt_opt(). This patch uses ax25_dev_put() and adjusts the position of ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev. Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220203150811.42256-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> [OP: backport to 4.14: adjust context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27ax25: add refcount in ax25_dev to avoid UAF bugsDuoming Zhou
commit d01ffb9eee4af165d83b08dd73ebdf9fe94a519b upstream. If we dereference ax25_dev after we call kfree(ax25_dev) in ax25_dev_device_down(), it will lead to concurrency UAF bugs. There are eight syscall functions suffer from UAF bugs, include ax25_bind(), ax25_release(), ax25_connect(), ax25_ioctl(), ax25_getname(), ax25_sendmsg(), ax25_getsockopt() and ax25_info_show(). One of the concurrency UAF can be shown as below: (USE) | (FREE) | ax25_device_event | ax25_dev_device_down ax25_bind | ... ... | kfree(ax25_dev) ax25_fillin_cb() | ... ax25_fillin_cb_from_dev() | ... | The root cause of UAF bugs is that kfree(ax25_dev) in ax25_dev_device_down() is not protected by any locks. When ax25_dev, which there are still pointers point to, is released, the concurrency UAF bug will happen. This patch introduces refcount into ax25_dev in order to guarantee that there are no pointers point to it when ax25_dev is released. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> [OP: backport to 4.14: adjusted context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27tcp: fix race condition when creating child sockets from syncookiesRicardo Dias
[ Upstream commit 01770a166165738a6e05c3d911fb4609cc4eb416 ] When the TCP stack is in SYN flood mode, the server child socket is created from the SYN cookie received in a TCP packet with the ACK flag set. The child socket is created when the server receives the first TCP packet with a valid SYN cookie from the client. Usually, this packet corresponds to the final step of the TCP 3-way handshake, the ACK packet. But is also possible to receive a valid SYN cookie from the first TCP data packet sent by the client, and thus create a child socket from that SYN cookie. Since a client socket is ready to send data as soon as it receives the SYN+ACK packet from the server, the client can send the ACK packet (sent by the TCP stack code), and the first data packet (sent by the userspace program) almost at the same time, and thus the server will equally receive the two TCP packets with valid SYN cookies almost at the same instant. When such event happens, the TCP stack code has a race condition that occurs between the momement a lookup is done to the established connections hashtable to check for the existence of a connection for the same client, and the moment that the child socket is added to the established connections hashtable. As a consequence, this race condition can lead to a situation where we add two child sockets to the established connections hashtable and deliver two sockets to the userspace program to the same client. This patch fixes the race condition by checking if an existing child socket exists for the same client when we are adding the second child socket to the established connections socket. If an existing child socket exists, we drop the packet and discard the second child socket to the same client. Signed-off-by: Ricardo Dias <rdias@singlestore.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27etherdevice: Adjust ether_addr* prototypes to silence -Wstringop-overeadKees Cook
commit 2618a0dae09ef37728dab89ff60418cbe25ae6bd upstream. With GCC 12, -Wstringop-overread was warning about an implicit cast from char[6] to char[8]. However, the extra 2 bytes are always thrown away, alignment doesn't matter, and the risk of hitting the edge of unallocated memory has been accepted, so this prototype can just be converted to a regular char *. Silences: net/core/dev.c: In function ‘bpf_prog_run_generic_xdp’: net/core/dev.c:4618:21: warning: ‘ether_addr_equal_64bits’ reading 8 bytes from a region of size 6 [-Wstringop-overread] 4618 | orig_host = ether_addr_equal_64bits(eth->h_dest, > skb->dev->dev_addr); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/core/dev.c:4618:21: note: referencing argument 1 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’} net/core/dev.c:4618:21: note: referencing argument 2 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’} In file included from net/core/dev.c:91: include/linux/etherdevice.h:375:20: note: in a call to function ‘ether_addr_equal_64bits’ 375 | static inline bool ether_addr_equal_64bits(const u8 addr1[6+2], | ^~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/netdev/20220212090811.uuzk6d76agw2vv73@pengutronix.de Cc: Jakub Kicinski <kuba@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Khem Raj <raj.khem@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20xfrm: policy: match with both mark and mask on user interfacesXin Long
commit 4f47e8ab6ab796b5380f74866fa5287aca4dcc58 upstream. In commit ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list"), it would take 'priority' to make a policy unique, and allow duplicated policies with different 'priority' to be added, which is not expected by userland, as Tobias reported in strongswan. To fix this duplicated policies issue, and also fix the issue in commit ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list"), when doing add/del/get/update on user interfaces, this patch is to change to look up a policy with both mark and mask by doing: mark.v == pol->mark.v && mark.m == pol->mark.m and leave the check: (mark & pol->mark.m) == pol->mark.v for tx/rx path only. As the userland expects an exact mark and mask match to manage policies. v1->v2: - make xfrm_policy_mark_match inline and fix the changelog as Tobias suggested. Fixes: 295fae568885 ("xfrm: Allow user space manipulation of SPD mark") Fixes: ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list") Reported-by: Tobias Brunner <tobias@strongswan.org> Tested-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20mm/sparsemem: fix 'mem_section' will never be NULL gcc 12 warningWaiman Long
commit a431dbbc540532b7465eae4fc8b56a85a9fc7d17 upstream. The gcc 12 compiler reports a "'mem_section' will never be NULL" warning on the following code: static inline struct mem_section *__nr_to_section(unsigned long nr) { #ifdef CONFIG_SPARSEMEM_EXTREME if (!mem_section) return NULL; #endif if (!mem_section[SECTION_NR_TO_ROOT(nr)]) return NULL; : It happens with CONFIG_SPARSEMEM_EXTREME off. The mem_section definition is #ifdef CONFIG_SPARSEMEM_EXTREME extern struct mem_section **mem_section; #else extern struct mem_section mem_section[NR_SECTION_ROOTS][SECTIONS_PER_ROOT]; #endif In the !CONFIG_SPARSEMEM_EXTREME case, mem_section is a static 2-dimensional array and so the check "!mem_section[SECTION_NR_TO_ROOT(nr)]" doesn't make sense. Fix this warning by moving the "!mem_section[SECTION_NR_TO_ROOT(nr)]" check up inside the CONFIG_SPARSEMEM_EXTREME block and adding an explicit NR_SECTION_ROOTS check to make sure that there is no out-of-bound array access. Link: https://lkml.kernel.org/r/20220331180246.2746210-1-longman@redhat.com Fixes: 3e347261a80b ("sparsemem extreme implementation") Signed-off-by: Waiman Long <longman@redhat.com> Reported-by: Justin Forbes <jforbes@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20net: add missing SOF_TIMESTAMPING_OPT_ID supportWillem de Bruijn
[ Upstream commit 8f932f762e7928d250e21006b00ff9b7718b0a64 ] SOF_TIMESTAMPING_OPT_ID is supported on TCP, UDP and RAW sockets. But it was missing on RAW with IPPROTO_IP, PF_PACKET and CAN. Add skb_setup_tx_timestamp that configures both tx_flags and tskey for these paths that do not need corking or use bytestream keys. Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20NFS: swap IO handling is slightly different for O_DIRECT IONeilBrown
[ Upstream commit 64158668ac8b31626a8ce48db4cad08496eb8340 ] 1/ Taking the i_rwsem for swap IO triggers lockdep warnings regarding possible deadlocks with "fs_reclaim". These deadlocks could, I believe, eventuate if a buffered read on the swapfile was attempted. We don't need coherence with the page cache for a swap file, and buffered writes are forbidden anyway. There is no other need for i_rwsem during direct IO. So never take it for swap_rw() 2/ generic_write_checks() explicitly forbids writes to swap, and performs checks that are not needed for swap. So bypass it for swap_rw(). Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20PCI: Reduce warnings on possible RW1C corruptionMark Tomlinson
[ Upstream commit 92c45b63ce22c8898aa41806e8d6692bcd577510 ] For hardware that only supports 32-bit writes to PCI there is the possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited messages was introduced by fb2659230120, but rate-limiting is not the best choice here. Some devices may not show the warnings they should if another device has just produced a bunch of warnings. Also, the number of messages can be a nuisance on devices which are otherwise working fine. Change the ratelimit to a single warning per bus. This ensures no bus is 'starved' of emitting a warning and also that there isn't a continuous stream of warnings. It would be preferable to have a warning per device, but the pci_dev structure is not available here, and a lookup from devfn would be far too slow. Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Fixes: fb2659230120 ("PCI: Warn on possible RW1C corruption for sub-32 bit config writes") Link: https://lore.kernel.org/r/20200806041455.11070-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20block: Add a helper to validate the block sizeXie Yongji
commit 570b1cac477643cbf01a45fa5d018430a1fddbce upstream. There are some duplicated codes to validate the block size in block drivers. This limitation actually comes from block layer, so this patch tries to add a new block layer helper for that. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20211026144015.188-2-xieyongji@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20netdevice: add the case if dev is NULLYajun Deng
commit b37a466837393af72fe8bcb8f1436410f3f173f3 upstream. Add the case if dev is NULL in dev_{put, hold}, so the caller doesn't need to care whether dev is NULL or not. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Pavel Machek <pavel@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-02arm64: entry: Add vectors that have the bhb mitigation sequencesJames Morse
commit ba2689234be92024e5635d30fe744f4853ad97db upstream. Some CPUs affected by Spectre-BHB need a sequence of branches, or a firmware call to be run before any indirect branch. This needs to go in the vectors. No CPU needs both. While this can be patched in, it would run on all CPUs as there is a single set of vectors. If only one part of a big/little combination is affected, the unaffected CPUs have to run the mitigation too. Create extra vectors that include the sequence. Subsequent patches will allow affected CPUs to select this set of vectors. Later patches will modify the loop count to match what the CPU requires. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-28esp: Fix possible buffer overflow in ESP transformationSteffen Klassert
commit ebe48d368e97d007bfeb76fcb065d6cfc4c96645 upstream. The maximum message size that can be send is bigger than the maximum site that skb_page_frag_refill can allocate. So it is possible to write beyond the allocated buffer. Fix this by doing a fallback to COW in that case. v2: Avoid get get_order() costs as suggested by Linus Torvalds. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Reported-by: valis <sec@valis.email> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Vaibhav Rustagi <vaibhavrustagi@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-23net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()Nicolas Dichtel
[ Upstream commit 4ee06de7729d795773145692e246a06448b1eb7a ] This kind of interface doesn't have a mac header. This patch fixes bpf_redirect() to a PIM interface. Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16virtio: acknowledge all features before accessMichael S. Tsirkin
commit 4fa59ede95195f267101a1b8916992cf3f245cdb upstream. The feature negotiation was designed in a way that makes it possible for devices to know which config fields will be accessed by drivers. This is broken since commit 404123c2db79 ("virtio: allow drivers to validate features") with fallout in at least block and net. We have a partial work-around in commit 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") which at least lets devices find out which format should config space have, but this is a partial fix: guests should not access config space without acknowledging features since otherwise we'll never be able to change the config space format. To fix, split finalize_features from virtio_finalize_features and call finalize_features with all feature bits before validation, and then - if validation changed any bits - once again after. Since virtio_finalize_features no longer writes out features rename it to virtio_features_ok - since that is what it does: checks that features are ok with the device. As a side effect, this also reduces the amount of hypervisor accesses - we now only acknowledge features once unless we are clearing any features when validating (which is uncommon). IRC I think that this was more or less always the intent in the spec but unfortunately the way the spec is worded does not say this explicitly, I plan to address this at the spec level, too. Acked-by: Jason Wang <jasowang@redhat.com> Cc: stable@vger.kernel.org Fixes: 404123c2db79 ("virtio: allow drivers to validate features") Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") Cc: "Halil Pasic" <pasic@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16virtio: unexport virtio_finalize_featuresMichael S. Tsirkin
commit 838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream. virtio_finalize_features is only used internally within virtio. No reason to export it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16net/mlx5: Fix size field in bufferx_reg structMohammad Kabat
[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ] According to HW spec the field "size" should be 16 bits in bufferx register. Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup") Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-11xen/gnttab: fix gnttab_end_foreign_access() without page specifiedJuergen Gross
Commit 42baefac638f06314298087394b982ead9ec444b upstream. gnttab_end_foreign_access() is used to free a grant reference and optionally to free the associated page. In case the grant is still in use by the other side processing is being deferred. This leads to a problem in case no page to be freed is specified by the caller: the caller doesn't know that the page is still mapped by the other side and thus should not be used for other purposes. The correct way to handle this situation is to take an additional reference to the granted page in case handling is being deferred and to drop that reference when the grant reference could be freed finally. This requires that there are no users of gnttab_end_foreign_access() left directly repurposing the granted page after the call, as this might result in clobbered data or information leaks via the not yet freed grant reference. This is part of CVE-2022-23041 / XSA-396. Reported-by: Simon Gaiser <simon@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11xen: remove gnttab_query_foreign_access()Juergen Gross
Commit 1dbd11ca75fe664d3e54607547771d021f531f59 upstream. Remove gnttab_query_foreign_access(), as it is unused and unsafe to use. All previous use cases assumed a grant would not be in use after gnttab_query_foreign_access() returned 0. This information is useless in best case, as it only refers to a situation in the past, which could have changed already. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11xen/grant-table: add gnttab_try_end_foreign_access()Juergen Gross
Commit 6b1775f26a2da2b05a6dc8ec2b5d14e9a4701a1a upstream. Add a new grant table function gnttab_try_end_foreign_access(), which will remove and free a grant if it is not in use. Its main use case is to either free a grant if it is no longer in use, or to take some other action if it is still in use. This other action can be an error exit, or (e.g. in the case of blkfront persistent grant feature) some special handling. This is CVE-2022-23036, CVE-2022-23038 / part of XSA-396. Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11arm/arm64: smccc/psci: add arm_smccc_1_1_get_conduit()Mark Rutland
commit 6b7fe77c334ae59fed9500140e08f4f896b36871 upstream. SMCCC callers are currently amassing a collection of enums for the SMCCC conduit, and are having to dig into the PSCI driver's internals in order to figure out what to do. Let's clean this up, with common SMCCC_CONDUIT_* definitions, and an arm_smccc_1_1_get_conduit() helper that abstracts the PSCI driver's internal state. We can kill off the PSCI_CONDUIT_* definitions once we've migrated users over to the new interface. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11arm/arm64: Provide a wrapper for SMCCC 1.1 callsSteven Price
commit 541625ac47ce9d0835efaee0fcbaa251b0000a37 upstream. SMCCC 1.1 calls may use either HVC or SMC depending on the PSCI conduit. Rather than coding this in every call site, provide a macro which uses the correct instruction. The macro also handles the case where no conduit is configured/available returning a not supported error in res, along with returning the conduit used for the call. This allow us to remove some duplicated code and will be useful later when adding paravirtualized time hypervisor calls. Signed-off-by: Steven Price <steven.price@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation ↵Josh Poimboeuf
reporting commit 44a3918c8245ab10c6c9719dd12e7a8d291980d8 upstream. With unprivileged eBPF enabled, eIBRS (without retpoline) is vulnerable to Spectre v2 BHB-based attacks. When both are enabled, print a warning message and report it in the 'spectre_v2' sysfs vulnerabilities file. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> [fllinden@amazon.com: backported to 4.14] Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08HID: add mapping for KEY_ALL_APPLICATIONSWilliam Mahon
commit 327b89f0acc4c20a06ed59e4d9af7f6d804dc2e2 upstream. This patch adds a new key definition for KEY_ALL_APPLICATIONS and aliases KEY_DASHBOARD to it. It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS. Signed-off-by: William Mahon <wmahon@chromium.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08netfilter: nf_queue: fix possible use-after-freeFlorian Westphal
commit c3873070247d9e3c7a6b0cf9bf9b45e8018427b1 upstream. Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change Fixes: 271b72c7fa82c ("udp: RCU handling for Unicast packets.") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08xfrm: enforce validity of offload input flagsLeon Romanovsky
commit 7c76ecd9c99b6e9a771d813ab1aa7fa428b3ade1 upstream. struct xfrm_user_offload has flags variable that received user input, but kernel didn't check if valid bits were provided. It caused a situation where not sanitized input was forwarded directly to the drivers. For example, XFRM_OFFLOAD_IPV6 define that was exposed, was used by strongswan, but not implemented in the kernel at all. As a solution, check and sanitize input flags to forward XFRM_OFFLOAD_INBOUND to the drivers. Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02openvswitch: Fix setting ipv6 fields causing hw csum failurePaul Blakey
commit d9b5ae5c1b241b91480aa30408be12fe91af834a upstream. Ipv6 ttl, label and tos fields are modified without first pulling/pushing the ipv6 header, which would have updated the hw csum (if available). This might cause csum validation when sending the packet to the stack, as can be seen in the trace below. Fix this by updating skb->csum if available. Trace resulted by ipv6 ttl dec and then sending packet to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]: [295241.900063] s_pf0vf2: hw csum failure [295241.923191] Call Trace: [295241.925728] <IRQ> [295241.927836] dump_stack+0x5c/0x80 [295241.931240] __skb_checksum_complete+0xac/0xc0 [295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack] [295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack] [295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch] [295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch] [295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch] [295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch] [295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch] [295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch] [295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch] [295242.034074] __netif_receive_skb_core+0x2ca/0xcb0 [295242.047498] netif_receive_skb_internal+0x3e/0xc0 [295242.052291] napi_gro_receive+0xba/0xe0 [295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core] [295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core] [295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core] [295242.077958] net_rx_action+0x149/0x3b0 [295242.086762] __do_softirq+0xd7/0x2d6 [295242.090427] irq_exit+0xf7/0x100 [295242.093748] do_IRQ+0x7f/0xd0 [295242.096806] common_interrupt+0xf/0xf [295242.100559] </IRQ> [295242.102750] RIP: 0033:0x7f9022e88cbd [295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda [295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000 [295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30 [295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340 [295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000 [295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40 Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action") Signed-off-by: Paul Blakey <paulb@nvidia.com> Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23bonding: fix data-races around agg_select_timerEric Dumazet
commit 9ceaf6f76b203682bb6100e14b3d7da4c0bedde8 upstream. syzbot reported that two threads might write over agg_select_timer at the same time. Make agg_select_timer atomic to fix the races. BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1: bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0: bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998 bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967 __dev_open+0x274/0x3a0 net/core/dev.c:1407 dev_open+0x54/0x190 net/core/dev.c:1443 bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937 do_set_master net/core/rtnetlink.c:2532 [inline] do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736 __rtnl_newlink net/core/rtnetlink.c:3414 [inline] rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000050 -> 0x0000004f Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23Revert "module, async: async_synchronize_full() on module init iff async is ↵Igor Pylypiv
used" [ Upstream commit 67d6212afda218d564890d1674bab28e8612170f ] This reverts commit 774a1221e862b343388347bac9b318767336b20b. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d28007 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221e862 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Changyuan Lyu <changyuanl@google.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16net: fix a memleak when uncloning an skb dst and its metadataAntoine Tenart
[ Upstream commit 9eeabdf17fa0ab75381045c867c370f4cc75a613 ] When uncloning an skb dst and its associated metadata, a new dst+metadata is allocated and later replaces the old one in the skb. This is helpful to have a non-shared dst+metadata attached to a specific skb. The issue is the uncloned dst+metadata is initialized with a refcount of 1, which is increased to 2 before attaching it to the skb. When tun_dst_unclone returns, the dst+metadata is only referenced from a single place (the skb) while its refcount is 2. Its refcount will never drop to 0 (when the skb is consumed), leading to a memory leak. Fix this by removing the call to dst_hold in tun_dst_unclone, as the dst+metadata refcount is already 1. Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.") Cc: Pravin B Shelar <pshelar@ovn.org> Reported-by: Vlad Buslov <vladbu@nvidia.com> Tested-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-23 23:57:36 +0000