summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2023-11-02kasan: print the original fault addr when access invalid shadowHaibo Li
commit babddbfb7d7d70ae7f10fedd75a45d8ad75fdddf upstream. when the checked address is illegal,the corresponding shadow address from kasan_mem_to_shadow may have no mapping in mmu table. Access such shadow address causes kernel oops. Here is a sample about oops on arm64(VA 39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on: [ffffffb80aaaaaaa] pgd=000000005d3ce003, p4d=000000005d3ce003, pud=000000005d3ce003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: CPU: 3 PID: 100 Comm: sh Not tainted 6.6.0-rc1-dirty #43 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __hwasan_load8_noabort+0x5c/0x90 lr : do_ib_ob+0xf4/0x110 ffffffb80aaaaaaa is the shadow address for efffff80aaaaaaaa. The problem is reading invalid shadow in kasan_check_range. The generic kasan also has similar oops. It only reports the shadow address which causes oops but not the original address. Commit 2f004eea0fc8("x86/kasan: Print original address on #GP") introduce to kasan_non_canonical_hook but limit it to KASAN_INLINE. This patch extends it to KASAN_OUTLINE mode. Link: https://lkml.kernel.org/r/20231009073748.159228-1-haibo.li@mediatek.com Fixes: 2f004eea0fc8("x86/kasan: Print original address on #GP") Signed-off-by: Haibo Li <haibo.li@mediatek.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Haibo Li <haibo.li@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-02scsi: sd: Introduce manage_shutdown device flagDamien Le Moal
commit 24eca2dce0f8d19db808c972b0281298d0bafe99 upstream. Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") change setting the manage_system_start_stop flag to false for libata managed disks to enable libata internal management of disk suspend/resume. However, a side effect of this change is that on system shutdown, disks are no longer being stopped (set to standby mode with the heads unloaded). While this is not a critical issue, this unclean shutdown is not recommended and shows up with increased smart counters (e.g. the unexpected power loss counter "Unexpect_Power_Loss_Ct"). Instead of defining a shutdown driver method for all ATA adapter drivers (not all of them define that operation), this patch resolves this issue by further refining the sd driver start/stop control of disks using the new flag manage_shutdown. If this new flag is set to true by a low level driver, the function sd_shutdown() will issue a START STOP UNIT command with the start argument set to 0 when a disk needs to be powered off (suspended) on system power off, that is, when system_state is equal to SYSTEM_POWER_OFF. Similarly to the other manage_xxx flags, the new manage_shutdown flag is exposed through sysfs as a read-write device attribute. To avoid any confusion between manage_shutdown and manage_system_start_stop, the comments describing these flags in include/scsi/scsi.h are also improved. Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218038 Link: https://lore.kernel.org/all/cd397c88-bf53-4768-9ab8-9d107df9e613@gmail.com/ Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-02netfilter: flowtable: GC pushes back packets to classic pathPablo Neira Ayuso
[ Upstream commit 735795f68b37e9bb49f642407a0d49b1631ea1c7 ] Since 41f2c7c342d3 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple"), flowtable GC pushes back flows with IPS_SEEN_REPLY back to classic path in every run, ie. every second. This is because of a new check for NF_FLOW_HW_ESTABLISHED which is specific of sched/act_ct. In Netfilter's flowtable case, NF_FLOW_HW_ESTABLISHED never gets set on and IPS_SEEN_REPLY is unreliable since users decide when to offload the flow before, such bit might be set on at a later stage. Fix it by adding a custom .gc handler that sched/act_ct can use to deal with its NF_FLOW_HW_ESTABLISHED bit. Fixes: 41f2c7c342d3 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple") Reported-by: Vladimir Smelhaus <vl.sm@email.cz> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-02gtp: uapi: fix GTPA_MAXPablo Neira Ayuso
[ Upstream commit adc8df12d91a2b8350b0cd4c7fec3e8546c9d1f8 ] Subtract one to __GTPA_MAX, otherwise GTPA_MAX is off by 2. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-02wifi: mac80211: don't drop all unprotected public action framesAvraham Stern
[ Upstream commit 91535613b6090fc968c601d11d4e2f16b333713c ] Not all public action frames have a protected variant. When MFP is enabled drop only public action frames that have a dual protected variant. Fixes: 76a3059cf124 ("wifi: mac80211: drop some unprotected action frames") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231016145213.2973e3c8d3bb.I6198b8d3b04cf4a97b06660d346caec3032f232a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-02btrfs: remove v0 extent handlingQu Wenruo
[ Upstream commit 182741d287fb1ea870ee6ef45aa1915a0b031233 ] The v0 extent item has been deprecated for a long time, and we don't have any report from the community either. So it's time to remove the v0 extent specific error handling, and just treat them as regular extent tree corruption. This patch would remove the btrfs_print_v0_err() helper, and enhance the involved error handling to treat them just as any extent tree corruption. No reports regarding v0 extents have been seen since the graceful handling was added in 2018. This involves: - btrfs_backref_add_tree_node() This change is a little tricky, the new code is changed to only handle BTRFS_TREE_BLOCK_REF_KEY and BTRFS_SHARED_BLOCK_REF_KEY. But this is safe, as we have rejected any unknown inline refs through btrfs_get_extent_inline_ref_type(). For keyed backrefs, we're safe to skip anything we don't know (that's if it can pass tree-checker in the first place). - btrfs_lookup_extent_info() - lookup_inline_extent_backref() - run_delayed_extent_op() - __btrfs_free_extent() - add_tree_block() Regular error handling of unexpected extent tree item, and abort transaction (if we have a trans handle). - remove_extent_data_ref() It's pretty much the same as the regular rejection of unknown backref key. But for this particular case, we can also remove a BUG_ON(). - extent_data_ref_count() We can remove the BTRFS_EXTENT_REF_V0_KEY BUG_ON(), as it would be rejected by the only caller. - btrfs_print_leaf() Remove the handling for BTRFS_EXTENT_REF_V0_KEY. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Stable-dep-of: eb96e221937a ("btrfs: fix unwritten extent buffer after snapshotting a new subvolume") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-02hugetlbfs: extend hugetlb_vma_lock to private VMAsRik van Riel
commit bf4916922c60f43efaa329744b3eef539aa6a2b2 upstream. Extend the locking scheme used to protect shared hugetlb mappings from truncate vs page fault races, in order to protect private hugetlb mappings (with resv_map) against MADV_DONTNEED. Add a read-write semaphore to the resv_map data structure, and use that from the hugetlb_vma_(un)lock_* functions, in preparation for closing the race between MADV_DONTNEED and page faults. Link: https://lkml.kernel.org/r/20231006040020.3677377-3-riel@surriel.com Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX nameKees Cook
commit cb3871b1cd135a6662b732fbc6b3db4afcdb4a64 upstream. The code pattern of memcpy(dst, src, strlen(src)) is almost always wrong. In this case it is wrong because it leaves memory uninitialized if it is less than sizeof(ni->name), and overflows ni->name when longer. Normally strtomem_pad() could be used here, but since ni->name is a trailing array in struct hci_mon_new_index, compilers that don't support -fstrict-flex-arrays=3 can't tell how large this array is via __builtin_object_size(). Instead, open-code the helper and use sizeof() since it will work correctly. Additionally mark ni->name as __nonstring since it appears to not be a %NUL terminated C string. Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Edward AD <twuufnxlz@gmail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event") Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/ Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25perf: Disallow mis-matched inherited group readsPeter Zijlstra
commit 32671e3799ca2e4590773fd0e63aaa4229e50c06 upstream. Because group consistency is non-atomic between parent (filedesc) and children (inherited) events, it is possible for PERF_FORMAT_GROUP read() to try and sum non-matching counter groups -- with non-sensical results. Add group_generation to distinguish the case where a parent group removes and adds an event and thus has the same number, but a different configuration of events as inherited groups. This became a problem when commit fa8c269353d5 ("perf/core: Invert perf_read_group() loops") flipped the order of child_list and sibling_list. Previously it would iterate the group (sibling_list) first, and for each sibling traverse the child_list. In this order, only the group composition of the parent is relevant. By flipping the order the group composition of the child (inherited) events becomes an issue and the mis-match in group composition becomes evident. That said; even prior to this commit, while reading of a group that is not equally inherited was not broken, it still made no sense. (Ab)use ECHILD as error return to indicate issues with child process group composition. Fixes: fa8c269353d5 ("perf/core: Invert perf_read_group() loops") Reported-by: Budimir Markovic <markovicbudimir@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20231018115654.GK33217@noisy.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25mtd: rawnand: Ensure the nand chip supports cached readsRouven Czerwinski
commit f6ca3fb6978f94d95ee79f95085fc22e71ca17cc upstream. Both the JEDEC and ONFI specification say that read cache sequential support is an optional command. This means that we not only need to check whether the individual controller supports the command, we also need to check the parameter pages for both ONFI and JEDEC NAND flashes before enabling sequential cache reads. This fixes support for NAND flashes which don't support enabling cache reads, i.e. Samsung K9F4G08U0F or Toshiba TC58NVG0S3HTA00. Sequential cache reads are now only available for ONFI and JEDEC devices, if individual vendors implement this, it needs to be enabled per vendor. Tested on i.MX6Q with a Samsung NAND flash chip that doesn't support sequential reads. Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Cc: stable@vger.kernel.org Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230922141717.35977-1-r.czerwinski@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25tcp: allow again tcp_disconnect() when threads are waitingPaolo Abeni
[ Upstream commit 419ce133ab928ab5efd7b50b2ef36ddfd4eadbd2 ] As reported by Tom, .NET and applications build on top of it rely on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP socket. The blamed commit below caused a regression, as such cancellation can now fail. As suggested by Eric, this change addresses the problem explicitly causing blocking I/O operation to terminate immediately (with an error) when a concurrent disconnect() is executed. Instead of tracking the number of threads blocked on a given socket, track the number of disconnect() issued on such socket. If such counter changes after a blocking operation releasing and re-acquiring the socket lock, error out the current operation. Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting") Reported-by: Tom Deseyn <tdeseyn@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305 Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25Bluetooth: hci_sync: Introduce PTR_UINT/UINT_PTR macrosLuiz Augusto von Dentz
[ Upstream commit a1f6c3aef13c9e7f8d459bd464e9e34da1342c0c ] This introduces PTR_UINT/UINT_PTR macros and replace the use of PTR_ERR/ERR_PTR. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: acab8ff29a2a ("Bluetooth: ISO: Fix invalid context error") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25ipv4/fib: send notify when delete source address routesHangbin Liu
[ Upstream commit 4b2b606075e50cdae62ab2356b0a1e206947c354 ] After deleting an interface address in fib_del_ifaddr(), the function scans the fib_info list for stray entries and calls fib_flush() and fib_table_flush(). Then the stray entries will be deleted silently and no RTM_DELROUTE notification will be sent. This lack of notification can make routing daemons, or monitor like `ip monitor route` miss the routing changes. e.g. + ip link add dummy1 type dummy + ip link add dummy2 type dummy + ip link set dummy1 up + ip link set dummy2 up + ip addr add 192.168.5.5/24 dev dummy1 + ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5 + ip -4 route 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 As Ido reminded, fib_table_flush() isn't only called when an address is deleted, but also when an interface is deleted or put down. The lack of notification in these cases is deliberate. And commit 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message on device down") introduced a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send the route delete notify blindly in fib_table_flush(). To fix this issue, let's add a new flag in "struct fib_info" to track the deleted prefer source address routes, and only send notify for them. After update: + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 Suggested-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230922075508.848925-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25Bluetooth: hci_core: Fix build warningsLuiz Augusto von Dentz
[ Upstream commit dcda165706b9fbfd685898d46a6749d7d397e0c0 ] This fixes the following warnings: net/bluetooth/hci_core.c: In function ‘hci_register_dev’: net/bluetooth/hci_core.c:2620:54: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 5 [-Wformat-truncation=] 2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id); | ^~ net/bluetooth/hci_core.c:2620:50: note: directive argument in the range [0, 2147483647] 2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id); | ^~~~~~~ net/bluetooth/hci_core.c:2620:9: note: ‘snprintf’ output between 5 and 14 bytes into a destination of size 8 2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validationWillem de Bruijn
commit fc8b2a619469378717e7270d2a4e1ef93c585f7a upstream. Syzbot reported two new paths to hit an internal WARNING using the new virtio gso type VIRTIO_NET_HDR_GSO_UDP_L4. RIP: 0010:skb_checksum_help+0x4a2/0x600 net/core/dev.c:3260 skb len=64521 gso_size=344 and RIP: 0010:skb_warn_bad_offload+0x118/0x240 net/core/dev.c:3262 Older virtio types have historically had loose restrictions, leading to many entirely impractical fuzzer generated packets causing problems deep in the kernel stack. Ideally, we would have had strict validation for all types from the start. New virtio types can have tighter validation. Limit UDP GSO packets inserted via virtio to the same limits imposed by the UDP_SEGMENT socket interface: 1. must use checksum offload 2. checksum offload matches UDP header 3. no more segments than UDP_MAX_SEGMENTS 4. UDP GSO does not take modifier flags, notably SKB_GSO_TCP_ECN Fixes: 860b7f27b8f7 ("linux/virtio_net.h: Support USO offload in vnet header.") Reported-by: syzbot+01cdbc31e9c0ae9b33ac@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000005039270605eb0b7f@google.com/ Reported-by: syzbot+c99d835ff081ca30f986@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000005426680605eb0b9f@google.com/ Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25neighbor: tracing: Move pin6 inside CONFIG_IPV6=y sectionGeert Uytterhoeven
commit 2915240eddba96b37de4c7e9a3d0ac6f9548454b upstream. When CONFIG_IPV6=n, and building with W=1: In file included from include/trace/define_trace.h:102, from include/trace/events/neigh.h:255, from net/core/net-traces.c:51: include/trace/events/neigh.h: In function ‘trace_event_raw_event_neigh_create’: include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable] 42 | struct in6_addr *pin6; | ^~~~ include/trace/trace_events.h:402:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’ 402 | { assign; } \ | ^~~~~~ include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’ 44 | PARAMS(assign), \ | ^~~~~~ include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’ 23 | TRACE_EVENT(neigh_create, | ^~~~~~~~~~~ include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’ 41 | TP_fast_assign( | ^~~~~~~~~~~~~~ In file included from include/trace/define_trace.h:103, from include/trace/events/neigh.h:255, from net/core/net-traces.c:51: include/trace/events/neigh.h: In function ‘perf_trace_neigh_create’: include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable] 42 | struct in6_addr *pin6; | ^~~~ include/trace/perf.h:51:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’ 51 | { assign; } \ | ^~~~~~ include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’ 44 | PARAMS(assign), \ | ^~~~~~ include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’ 23 | TRACE_EVENT(neigh_create, | ^~~~~~~~~~~ include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’ 41 | TP_fast_assign( | ^~~~~~~~~~~~~~ Indeed, the variable pin6 is declared and initialized unconditionally, while it is only used and needlessly re-initialized when support for IPv6 is enabled. Fix this by dropping the unused variable initialization, and moving the variable declaration inside the existing section protected by a check for CONFIG_IPV6. Fixes: fc651001d2c5ca4f ("neighbor: Add tracepoint to __neigh_create") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25tcp: fix excessive TLP and RACK timeouts from HZ roundingNeal Cardwell
commit 1c2709cfff1dedbb9591e989e2f001484208d914 upstream. We discovered from packet traces of slow loss recovery on kernels with the default HZ=250 setting (and min_rtt < 1ms) that after reordering, when receiving a SACKed sequence range, the RACK reordering timer was firing after about 16ms rather than the desired value of roughly min_rtt/4 + 2ms. The problem is largely due to the RACK reorder timer calculation adding in TCP_TIMEOUT_MIN, which is 2 jiffies. On kernels with HZ=250, this is 2*4ms = 8ms. The TLP timer calculation has the exact same issue. This commit fixes the TLP transmit timer and RACK reordering timer floor calculation to more closely match the intended 2ms floor even on kernels with HZ=250. It does this by adding in a new TCP_TIMEOUT_MIN_US floor of 2000 us and then converting to jiffies, instead of the current approach of converting to jiffies and then adding th TCP_TIMEOUT_MIN value of 2 jiffies. Our testing has verified that on kernels with HZ=1000, as expected, this does not produce significant changes in behavior, but on kernels with the default HZ=250 the latency improvement can be large. For example, our tests show that for HZ=250 kernels at low RTTs this fix roughly halves the latency for the RACK reorder timer: instead of mostly firing at 16ms it mostly fires at 8ms. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Fixes: bb4d991a28cc ("tcp: adjust tail loss probe timeout") Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231015174700.2206872-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25xfrm: fix a data-race in xfrm_gen_index()Eric Dumazet
commit 3e4bc23926b83c3c67e5f61ae8571602754131a6 upstream. xfrm_gen_index() mutual exclusion uses net->xfrm.xfrm_policy_lock. This means we must use a per-netns idx_generator variable, instead of a static one. Alternative would be to use an atomic variable. syzbot reported: BUG: KCSAN: data-race in xfrm_sk_policy_insert / xfrm_sk_policy_insert write to 0xffffffff87005938 of 4 bytes by task 29466 on cpu 0: xfrm_gen_index net/xfrm/xfrm_policy.c:1385 [inline] xfrm_sk_policy_insert+0x262/0x640 net/xfrm/xfrm_policy.c:2347 xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639 do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943 ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012 rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054 sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697 __sys_setsockopt+0x1c9/0x230 net/socket.c:2263 __do_sys_setsockopt net/socket.c:2274 [inline] __se_sys_setsockopt net/socket.c:2271 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2271 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffffffff87005938 of 4 bytes by task 29460 on cpu 1: xfrm_sk_policy_insert+0x13e/0x640 xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639 do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943 ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012 rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054 sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697 __sys_setsockopt+0x1c9/0x230 net/socket.c:2263 __do_sys_setsockopt net/socket.c:2274 [inline] __se_sys_setsockopt net/socket.c:2271 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2271 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00006ad8 -> 0x00006b18 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 29460 Comm: syz-executor.1 Not tainted 6.5.0-rc5-syzkaller-00243-g9106536c1aa3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Fixes: 1121994c803f ("netns xfrm: policy insertion in netns") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25audit,io_uring: io_uring openat triggers audit reference count underflowDan Clash
commit 03adc61edad49e1bbecfb53f7ea5d78f398fe368 upstream. An io_uring openat operation can update an audit reference count from multiple threads resulting in the call trace below. A call to io_uring_submit() with a single openat op with a flag of IOSQE_ASYNC results in the following reference count updates. These first part of the system call performs two increments that do not race. do_syscall_64() __do_sys_io_uring_enter() io_submit_sqes() io_openat_prep() __io_openat_prep() getname() getname_flags() /* update 1 (increment) */ __audit_getname() /* update 2 (increment) */ The openat op is queued to an io_uring worker thread which starts the opportunity for a race. The system call exit performs one decrement. do_syscall_64() syscall_exit_to_user_mode() syscall_exit_to_user_mode_prepare() __audit_syscall_exit() audit_reset_context() putname() /* update 3 (decrement) */ The io_uring worker thread performs one increment and two decrements. These updates can race with the system call decrement. io_wqe_worker() io_worker_handle_work() io_wq_submit_work() io_issue_sqe() io_openat() io_openat2() do_filp_open() path_openat() __audit_inode() /* update 4 (increment) */ putname() /* update 5 (decrement) */ __audit_uring_exit() audit_reset_context() putname() /* update 6 (decrement) */ The fix is to change the refcnt member of struct audit_names from int to atomic_t. kernel BUG at fs/namei.c:262! Call Trace: ... ? putname+0x68/0x70 audit_reset_context.part.0.constprop.0+0xe1/0x300 __audit_uring_exit+0xda/0x1c0 io_issue_sqe+0x1f3/0x450 ? lock_timer_base+0x3b/0xd0 io_wq_submit_work+0x8d/0x2b0 ? __try_to_del_timer_sync+0x67/0xa0 io_worker_handle_work+0x17c/0x2b0 io_wqe_worker+0x10a/0x350 Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/MW2PR2101MB1033FFF044A258F84AEAA584F1C9A@MW2PR2101MB1033.namprd21.prod.outlook.com/ Fixes: 5bd2182d58e9 ("audit,io_uring,io-wq: add some basic audit support to io_uring") Signed-off-by: Dan Clash <daclash@linux.microsoft.com> Link: https://lore.kernel.org/r/20231012215518.GA4048@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25Bluetooth: hci_conn: Fix modifying handle while abortingLuiz Augusto von Dentz
commit 16e3b6429159795a87add7584eb100b19aa1d70b upstream. This introduces hci_conn_set_handle which takes care of verifying the conditions where the hci_conn handle can be modified, including when hci_conn_abort has been called and also checks that the handles is valid as well. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-19fs: factor out vfs_parse_monolithic_sep() helperAmir Goldstein
[ Upstream commit e001d1447cd4585d7f23a44ff668ba2bc624badb ] Factor out vfs_parse_monolithic_sep() from generic_parse_monolithic(), so filesystems could use it with a custom option separator callback. Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Stable-dep-of: c34706acf40b ("ovl: fix regression in parsing of mount options with escaped comma") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-19dma-buf: add dma_fence_timestamp helperChristian König
commit b83ce9cb4a465b8f9a3fa45561b721a9551f60e3 upstream. When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-19mcb: remove is_added flag from mcb_device structJorge Sanjuan Garcia
commit 0f28ada1fbf0054557cddcdb93ad17f767105208 upstream. When calling mcb_bus_add_devices(), both mcb devices and the mcb bus will attempt to attach a device to a driver because they share the same bus_type. This causes an issue when trying to cast the container of the device to mcb_device struct using to_mcb_device(), leading to a wrong cast when the mcb_bus is added. A crash occurs when freing the ida resources as the bus numbering of mcb_bus gets confused with the is_added flag on the mcb_device struct. The only reason for this cast was to keep an is_added flag on the mcb_device struct that does not seem necessary. The function device_attach() handles already bound devices and the mcb subsystem does nothing special with this is_added flag so remove it completely. Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device") Cc: stable <stable@kernel.org> Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Co-developed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Signed-off-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Link: https://lore.kernel.org/r/20230906114901.63174-2-JoseJavier.Rodriguez@duagon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-19af_packet: Fix fortified memcpy() without flex array.Kuniyuki Iwashima
[ Upstream commit e2bca4870fdaf855651ee80b083d892599c5d982 ] Sergei Trofimovich reported a regression [0] caused by commit a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname()."). It introduced a flex array sll_addr_flex in struct sockaddr_ll as a union-ed member with sll_addr to work around the fortified memcpy() check. However, a userspace program uses a struct that has struct sockaddr_ll in the middle, where a flex array is illegal to exist. include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t' 24 | __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex); | ^~~~~~~~~~~~~~~~~~~~ To fix the regression, let's go back to the first attempt [1] telling memcpy() the actual size of the array. Reported-by: Sergei Trofimovich <slyich@gmail.com> Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0] Link: https://lore.kernel.org/netdev/20230720004410.87588-3-kuniyu@amazon.com/ [1] Fixes: a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname().") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20231009153151.75688-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-19net: macsec: indicate next pn update when offloadingRadu Pirea (NXP OSS)
[ Upstream commit 0412cc846a1ef38697c3f321f9b174da91ecd3b5 ] Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: e0a8c918daa5 ("net: phy: mscc: macsec: reject PN update requests") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-19ata: libata-scsi: Disable scsi device manage_system_start_stopDamien Le Moal
commit aa3998dbeb3abce63653b7f6d4542e7dcd022590 upstream. The introduction of a device link to create a consumer/supplier relationship between the scsi device of an ATA device and the ATA port of that ATA device fixes the ordering of system suspend and resume operations. For suspend, the scsi device is suspended first and the ata port after it. This is fine as this allows the synchronize cache and START STOP UNIT commands issued by the scsi disk driver to be executed before the ata port is disabled. For resume operations, the ata port is resumed first, followed by the scsi device. This allows having the request queue of the scsi device to be unfrozen after the ata port resume is scheduled in EH, thus avoiding to see new requests prematurely issued to the ATA device. Since libata sets manage_system_start_stop to 1, the scsi disk resume operation also results in issuing a START STOP UNIT command to the device being resumed so that the device exits standby power mode. However, restoring the ATA device to the active power mode must be synchronized with libata EH processing of the port resume operation to avoid either 1) seeing the start stop unit command being received too early when the port is not yet resumed and ready to accept commands, or after the port resume process issues commands such as IDENTIFY to revalidate the device. In this last case, the risk is that the device revalidation fails with timeout errors as the drive is still spun down. Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") disabled issuing the START STOP UNIT command to avoid issues with it. But this is incorrect as transitioning a device to the active power mode from the standby power mode set on suspend requires a media access command. The IDENTIFY, READ LOG and SET FEATURES commands executed in libata EH context triggered by the ata port resume operation may thus fail. Fix these synchronization issues is by handling a device power mode transitions for system suspend and resume directly in libata EH context, without relying on the scsi disk driver management triggered with the manage_system_start_stop flag. To do this, the following libata helper functions are introduced: 1) ata_dev_power_set_standby(): This function issues a STANDBY IMMEDIATE command to transitiom a device to the standby power mode. For HDDs, this spins down the disks. This function applies only to ATA and ZAC devices and does nothing otherwise. This function also does nothing for devices that have the ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag set. For suspend, call ata_dev_power_set_standby() in ata_eh_handle_port_suspend() before the port is disabled and frozen. ata_eh_unload() is also modified to transition all enabled devices to the standby power mode when the system is shutdown or devices removed. 2) ata_dev_power_set_active() and This function applies to ATA or ZAC devices and issues a VERIFY command for 1 sector at LBA 0 to transition the device to the active power mode. For HDDs, since this function will complete only once the disk spin up. Its execution uses the same timeouts as for reset, to give the drive enough time to complete spinup without triggering a command timeout. For resume, call ata_dev_power_set_active() in ata_eh_revalidate_and_attach() after the port has been enabled and before any other command is issued to the device. With these changes, the manage_system_start_stop and no_start_on_resume scsi device flags do not need to be set in ata_scsi_dev_config(). The flag manage_runtime_start_stop is still set to allow the sd driver to spinup/spindown a disk through the sd runtime operations. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-19quota: Fix slow quotaoffJan Kara
commit 869b6ea1609f655a43251bf41757aa44e5350a8f upstream. Eric has reported that commit dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") heavily increases runtime of generic/270 xfstest for ext4 in nojournal mode. The reason for this is that ext4 in nojournal mode leaves dquots dirty until the last dqput() and thus the cleanup done in quota_release_workfn() has to write them all. Due to the way quota_release_workfn() is written this results in synchronize_srcu() call for each dirty dquot which makes the dquot cleanup when turning quotas off extremely slow. To be able to avoid synchronize_srcu() for each dirty dquot we need to rework how we track dquots to be cleaned up. Instead of keeping the last dquot reference while it is on releasing_dquots list, we drop it right away and mark the dquot with new DQ_RELEASING_B bit instead. This way we can we can remove dquot from releasing_dquots list when new reference to it is acquired and thus there's no need to call synchronize_srcu() each time we drop dq_list_lock. References: https://lore.kernel.org/all/ZRytn6CxFK2oECUt@debian-BULLSEYE-live-builder-AMD64 Reported-by: Eric Whitney <enwlinux@gmail.com> Fixes: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-19cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timerOza Pawandeep
[ Upstream commit 4785aa8028536c2be656d22c74ec1995b97056f3 ] Arm® Functional Fixed Hardware Specification defines LPI states, which provide an architectural context loss flags field that can be used to describe the context that might be lost when an LPI state is entered. - Core context Lost - General purpose registers. - Floating point and SIMD registers. - System registers, include the System register based - generic timer for the core. - Debug register in the core power domain. - PMU registers in the core power domain. - Trace register in the core power domain. - Trace context loss - GICR - GICD Qualcomm's custom CPUs preserves the architectural state, including keeping the power domain for local timers active. when core is power gated, the local timers are sufficient to wake the core up without needing broadcast timer. The patch fixes the evaluation of cpuidle arch_flags, and moves only to broadcast timer if core context lost is defined in ACPI LPI. Fixes: a36a7fecfe60 ("ACPI / processor_idle: Add support for Low Power Idle(LPI) states") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Oza Pawandeep <quic_poza@quicinc.com> Link: https://lore.kernel.org/r/20231003173333.2865323-1-quic_poza@quicinc.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10net: mana: Fix oversized sge0 for GSO packetsHaiyang Zhang
[ Upstream commit a43e8e9ffa0d1de058964edf1a0622cbb7e27cfe ] Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10tcp: fix quick-ack counting to count actual ACKs of new dataNeal Cardwell
[ Upstream commit 059217c18be6757b95bfd77ba53fb50b48b8a816 ] This commit fixes quick-ack counting so that it only considers that a quick-ack has been provided if we are sending an ACK that newly acknowledges data. The code was erroneously using the number of data segments in outgoing skbs when deciding how many quick-ack credits to remove. This logic does not make sense, and could cause poor performance in request-response workloads, like RPC traffic, where requests or responses can be multi-segment skbs. When a TCP connection decides to send N quick-acks, that is to accelerate the cwnd growth of the congestion control module controlling the remote endpoint of the TCP connection. That quick-ack decision is purely about the incoming data and outgoing ACKs. It has nothing to do with the outgoing data or the size of outgoing data. And in particular, an ACK only serves the intended purpose of allowing the remote congestion control to grow the congestion window quickly if the ACK is ACKing or SACKing new data. The fix is simple: only count packets as serving the goal of the quickack mechanism if they are ACKing/SACKing new data. We can tell whether this is the case by checking inet_csk_ack_scheduled(), since we schedule an ACK exactly when we are ACKing/SACKing new data. Fixes: fc6415bcb0f5 ("[TCP]: Fix quick-ack decrementing with TSO.") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10netfilter: handle the connecting collision properly in nf_conntrack_proto_sctpXin Long
[ Upstream commit 8e56b063c86569e51eed1c5681ce6361fa97fc7a ] In Scenario A and B below, as the delayed INIT_ACK always changes the peer vtag, SCTP ct with the incorrect vtag may cause packet loss. Scenario A: INIT_ACK is delayed until the peer receives its own INIT_ACK 192.168.1.2 > 192.168.1.1: [INIT] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT] [init tag: 1414468151] 192.168.1.2 > 192.168.1.1: [INIT ACK] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT ACK] [init tag: 1650211246] * 192.168.1.2 > 192.168.1.1: [COOKIE ECHO] 192.168.1.1 > 192.168.1.2: [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: [COOKIE ACK] Scenario B: INIT_ACK is delayed until the peer completes its own handshake 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] * This patch fixes it as below: In SCTP_CID_INIT processing: - clear ct->proto.sctp.init[!dir] if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir]. (Scenario E) - set ct->proto.sctp.init[dir]. In SCTP_CID_INIT_ACK processing: - drop it if !ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario B, Scenario C) - drop it if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario A) In SCTP_CID_COOKIE_ACK processing: - clear ct->proto.sctp.init[dir] and ct->proto.sctp.init[!dir]. (Scenario D) Also, it's important to allow the ct state to move forward with cookie_echo and cookie_ack from the opposite dir for the collision scenarios. There are also other Scenarios where it should allow the packet through, addressed by the processing above: Scenario C: new CT is created by INIT_ACK. Scenario D: start INIT on the existing ESTABLISHED ct. Scenario E: start INIT after the old collision on the existing ESTABLISHED ct. 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] (both side are stopped, then start new connection again in hours) 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 242308742] Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10neighbour: fix data-races around n->outputEric Dumazet
[ Upstream commit 5baa0433a15eadd729625004c37463acb982eca7 ] n->output field can be read locklessly, while a writer might change the pointer concurrently. Add missing annotations to prevent load-store tearing. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10bpf: Fix tr dereferencingLeon Hwang
[ Upstream commit b724a6418f1f853bcb39c8923bf14a50c7bdbd07 ] Fix 'tr' dereferencing bug when CONFIG_BPF_JIT is turned off. When CONFIG_BPF_JIT is turned off, 'bpf_trampoline_get()' returns NULL, which is same as the cases when CONFIG_BPF_JIT is turned on. Closes: https://lore.kernel.org/r/202309131936.5Nc8eUD0-lkp@intel.com/ Fixes: f7b12b6fea00 ("bpf: verifier: refactor check_attach_btf_id()") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Leon Hwang <hffilwlqm@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230917153846.88732-1-hffilwlqm@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10wifi: cfg80211: add missing kernel-doc for cqm_rssi_workJohannes Berg
[ Upstream commit d1383077c225ceb87ac7a3b56b2c505193f77ed7 ] As reported by Stephen, I neglected to add the kernel-doc for the new struct member. Fix that. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10wifi: cfg80211: fix cqm_config access raceJohannes Berg
[ Upstream commit 37c20b2effe987b806c8de6d12978e4ffeff026f ] Max Schulze reports crashes with brcmfmac. The reason seems to be a race between userspace removing the CQM config and the driver calling cfg80211_cqm_rssi_notify(), where if the data is freed while cfg80211_cqm_rssi_notify() runs it will crash since it assumes wdev->cqm_config is set. This can't be fixed with a simple non-NULL check since there's nothing we can do for locking easily, so use RCU instead to protect the pointer, but that requires pulling the updates out into an asynchronous worker so they can sleep and call back into the driver. Since we need to change the free anyway, also change it to go back to the old settings if changing the settings fails. Reported-and-tested-by: Max Schulze <max.schulze@online.de> Closes: https://lore.kernel.org/r/ac96309a-8d8d-4435-36e6-6d152eb31876@online.de Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10wifi: cfg80211/mac80211: hold link BSSes when assoc fails for MLO connectionWen Gong
[ Upstream commit 234249d88b091d006b82f8d570343aae5f383736 ] When connect to MLO AP with more than one link, and the assoc response of AP is not success, then cfg80211_unhold_bss() is not called for all the links' cfg80211_bss except the primary link which means the link used by the latest successful association request. Thus the hold value of the cfg80211_bss is not reset to 0 after the assoc fail, and then the __cfg80211_unlink_bss() will not be called for the cfg80211_bss by __cfg80211_bss_expire(). Then the AP always looks exist even the AP is shutdown or reconfigured to another type, then it will lead error while connecting it again. The detail info are as below. When connect with muti-links AP, cfg80211_hold_bss() is called by cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When assoc response from AP is not success(such as status_code==1), the ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL because ieee80211_assoc_success()->ieee80211_vif_update_links() is not called for the links. Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and struct cfg80211_connect_resp_params cr in __cfg80211_connect_result() will only have the data of the primary link, and finally function cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss() for the primary link. Then cfg80211_bss of the other links will never free because its hold is always > 0 now. Hence assign value for the bss and status from assoc_data since it is valid for this case. Also assign value of addr from assoc_data when the link is NULL because the addrs of assoc_data and link both represent the local link addr and they are same value for success connection. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW statesLiam R. Howlett
commit a8091f039c1ebf5cb0d5261e3613f18eb2a5d8b7 upstream. When updating the maple tree iterator to avoid rewalks, an issue was introduced when shifting beyond the limits. This can be seen by trying to go to the previous address of 0, which would set the maple node to MAS_NONE and keep the range as the last entry. Subsequent calls to mas_find() would then search upwards from mas->last and skip the value at mas->index/mas->last. This showed up as a bug in mprotect which skips the actual VMA at the current range after attempting to go to the previous VMA from 0. Since MAS_NONE may already be set when searching for a value that isn't contained within a node, changing the handling of MAS_NONE in mas_find() would make the code more complicated and error prone. Furthermore, there was no way to tell which limit was hit, and thus which action to take (next or the entry at the current range). This solution is to add two states to track what happened with the previous iterator action. This allows for the expected behaviour of the next command to return the correct item (either the item at the range requested, or the next/previous). Tests are also added and updated accordingly. Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/ Fixes: 39193685d585 ("maple_tree: try harder to keep active node with mas_prev()") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Pedro Falcato <pedro.falcato@gmail.com> Closes: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b Closes: https://bugs.archlinux.org/task/79656 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10net: change accept_ra_min_rtr_lft to affect all RA lifetimesPatrick Rohr
commit 5027d54a9c30bc7ec808360378e2b4753f053f25 upstream. accept_ra_min_rtr_lft only considered the lifetime of the default route and discarded entire RAs accordingly. This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and applies the value to individual RA sections; in particular, router lifetime, PIO preferred lifetime, and RIO lifetime. If any of those lifetimes are lower than the configured value, the specific RA section is ignored. In order for the sysctl to be useful to Android, it should really apply to all lifetimes in the RA, since that is what determines the minimum frequency at which RAs must be processed by the kernel. Android uses hardware offloads to drop RAs for a fraction of the minimum of all lifetimes present in the RA (some networks have very frequent RAs (5s) with high lifetimes (2h)). Despite this, we have encountered networks that set the router lifetime to 30s which results in very frequent CPU wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the WiFi firmware) entirely on such networks, it seems better to ignore the misconfigured routers while still processing RAs from other IPv6 routers on the same network (i.e. to support IoT applications). The previous implementation dropped the entire RA based on router lifetime. This turned out to be hard to expand to the other lifetimes present in the RA in a consistent manner; dropping the entire RA based on RIO/PIO lifetimes would essentially require parsing the whole thing twice. Fixes: 1671bcfd76fd ("net: add sysctl accept_ra_min_rtr_lft") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Patrick Rohr <prohr@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10net: add sysctl accept_ra_min_rtr_lftPatrick Rohr
commit 1671bcfd76fdc0b9e65153cf759153083755fe4c upstream. This change adds a new sysctl accept_ra_min_rtr_lft to specify the minimum acceptable router lifetime in an RA. If the received RA router lifetime is less than the configured value (and not 0), the RA is ignored. This is useful for mobile devices, whose battery life can be impacted by networks that configure RAs with a short lifetime. On such networks, the device should never gain IPv6 provisioning and should attempt to drop RAs via hardware offload, if available. Signed-off-by: Patrick Rohr <prohr@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10scsi: Do not attempt to rescan suspended devicesDamien Le Moal
[ Upstream commit ff48b37802e5c134e2dfc4d091f10b2eb5065a72 ] scsi_rescan_device() takes a scsi device lock before executing a device handler and device driver rescan methods. Waiting for the completion of any command issued to the device by these methods will thus be done with the device lock held. As a result, there is a risk of deadlocking within the power management code if scsi_rescan_device() is called to handle a device resume with the associated scsi device not yet resumed. Avoid such situation by checking that the target scsi device is in the running state, that is, fully capable of executing commands, before proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise. With this error return, the caller can retry rescaning the device after a delay. The state check is done with the device lock held and is thus safe against incoming suspend power management operations. Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Stable-dep-of: 8b4d9469d0b0 ("ata: libata-scsi: Fix delayed scsi_rescan_device() execution") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10scsi: core: Improve type safety of scsi_rescan_device()Bart Van Assche
[ Upstream commit 79519528a180c64a90863db2ce70887de6c49d16 ] Most callers of scsi_rescan_device() have the scsi_device pointer readily available. Pass a struct scsi_device pointer to scsi_rescan_device() instead of a struct device pointer. This change prevents that a pointer to another struct device would be passed accidentally to scsi_rescan_device(). Remove the scsi_rescan_device() declaration from the scsi_priv.h header file since it duplicates the declaration in <scsi/scsi_host.h>. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230822153043.4046244-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: 8b4d9469d0b0 ("ata: libata-scsi: Fix delayed scsi_rescan_device() execution") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10maple_tree: add mas_is_active() to detect in-tree walksLiam R. Howlett
[ Upstream commit 5c590804b6b0ff933ed4e5cee5d76de3a5048d9f ] Patch series "maple_tree: Fix mas_prev() state regression". Pedro Falcato retported an mprotect regression [1] which was bisected back to the iterator changes for maple tree. Root cause analysis showed the mas_prev() running off the end of the VMA space (previous from 0) followed by mas_find(), would skip the first value. This patchset introduces maple state underflow/overflow so the sequence of calls on the maple state will return what the user expects. Users who encounter this bug may see mprotect(), userfaultfd_register(), and mlock() fail on VMAs mapped with address 0. This patch (of 2): Instead of constantly checking each possibility of the maple state, create a fast path that will skip over checking unlikely states. Link: https://lkml.kernel.org/r/20230921181236.509072-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20230921181236.509072-2-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06ata: libata-sata: increase PMP SRST timeout to 10sMatthias Schiffer
commit 753a4d531bc518633ea88ac0ed02b25a16823d51 upstream. On certain SATA controllers, softreset fails after wakeup from S2RAM with the message "softreset failed (1st FIS failed)", sometimes resulting in drives not being detected again. With the increased timeout, this issue is avoided. Instead, "softreset failed (device not ready)" is now logged 1-2 times; this later failure seems to cause fewer problems however, and the drives are detected reliably once they've spun up and the probe is retried. The issue was observed with the primary SATA controller of the QNAP TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU, and the following drives: - Seagate IronWolf ST12000VN0008 - Seagate IronWolf ST8000NE0004 The SATA controller seems to be more relevant to this issue than the drives, as the same drives are always detected reliably on the secondary SATA controller on the same board (an ASMedia 106x) without any "softreset failed" errors even without the increased timeout. Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s") Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-06bpf: Fix BTF_ID symbol generation collisionJiri Olsa
commit 8f908db77782630c45ba29dac35c434b5ce0b730 upstream. Marcus and Satya reported an issue where BTF_ID macro generates same symbol in separate objects and that breaks final vmlinux link. ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol '__BTF_ID__struct__cgroup__624' is already defined This can be triggered under specific configs when __COUNTER__ happens to be the same for the same symbol in two different translation units, which is already quite unlikely to happen. Add __LINE__ number suffix to make BTF_ID symbol more unique, which is not a complete fix, but it would help for now and meanwhile we can work on better solution as suggested by Andrii. Cc: stable@vger.kernel.org Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com> Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com> Closes: https://github.com/ClangBuiltLinux/linux/issues/1913 Debugged-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-1-263fc519c21f@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-06mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcementJohannes Weiner
commit 9ea9cb00a82b53ec39630eac718776d37e41b35a upstream. Breno and Josef report a deadlock scenario from cgroup reclaim re-entering the filesystem: [ 361.546690] ====================================================== [ 361.559210] WARNING: possible circular locking dependency detected [ 361.571703] 6.5.0-0_fbk700_debug_rc0_kbuilder_13159_gbf787a128001 #1 Tainted: G S E [ 361.589704] ------------------------------------------------------ [ 361.602277] find/9315 is trying to acquire lock: [ 361.611625] ffff88837ba140c0 (&delayed_node->mutex){+.+.}-{4:4}, at: __btrfs_release_delayed_node+0x68/0x4f0 [ 361.631437] [ 361.631437] but task is already holding lock: [ 361.643243] ffff8881765b8678 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock+0x1e/0x40 [ 362.904457] mutex_lock_nested+0x1c/0x30 [ 362.912414] __btrfs_release_delayed_node+0x68/0x4f0 [ 362.922460] btrfs_evict_inode+0x301/0x770 [ 362.982726] evict+0x17c/0x380 [ 362.988944] prune_icache_sb+0x100/0x1d0 [ 363.005559] super_cache_scan+0x1f8/0x260 [ 363.013695] do_shrink_slab+0x2a2/0x540 [ 363.021489] shrink_slab_memcg+0x237/0x3d0 [ 363.050606] shrink_slab+0xa7/0x240 [ 363.083382] shrink_node_memcgs+0x262/0x3b0 [ 363.091870] shrink_node+0x1a4/0x720 [ 363.099150] shrink_zones+0x1f6/0x5d0 [ 363.148798] do_try_to_free_pages+0x19b/0x5e0 [ 363.157633] try_to_free_mem_cgroup_pages+0x266/0x370 [ 363.190575] reclaim_high+0x16f/0x1f0 [ 363.208409] mem_cgroup_handle_over_high+0x10b/0x270 [ 363.246678] try_charge_memcg+0xaf2/0xc70 [ 363.304151] charge_memcg+0xf0/0x350 [ 363.320070] __mem_cgroup_charge+0x28/0x40 [ 363.328371] __filemap_add_folio+0x870/0xd50 [ 363.371303] filemap_add_folio+0xdd/0x310 [ 363.399696] __filemap_get_folio+0x2fc/0x7d0 [ 363.419086] pagecache_get_page+0xe/0x30 [ 363.427048] alloc_extent_buffer+0x1cd/0x6a0 [ 363.435704] read_tree_block+0x43/0xc0 [ 363.443316] read_block_for_search+0x361/0x510 [ 363.466690] btrfs_search_slot+0xc8c/0x1520 This is caused by the mem_cgroup_handle_over_high() not respecting the gfp_mask of the allocation context. We used to only call this function on resume to userspace, where no locks were held. But c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges") added a call from the allocation context without considering the gfp. Link: https://lkml.kernel.org/r/20230914152139.100822-1-hannes@cmpxchg.org Fixes: c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Breno Leitao <leitao@debian.org> Reported-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> [5.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-06timers: Tag (hr)timer softirq as hotplug safeFrederic Weisbecker
commit 1a6a464774947920dcedcf7409be62495c7cedd0 upstream. Specific stress involving frequent CPU-hotplug operations, such as running rcutorture for example, may trigger the following message: NOHZ tick-stop error: local softirq work is pending, handler #02!!!" This happens in the CPU-down hotplug process, after CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this fragile intermediate state, softirqs waiting for threaded handling may be forever ignored and eventually reported by the idle task as in the above example. However some vectors are known to be safe as long as the corresponding subsystems have teardown callbacks handling the migration of their events. The above error message reports pending timers softirq although this vector can be considered as hotplug safe because the CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration of timers after the death of the CPU. Hrtimers also have a similar hotplug handling. Therefore this error message, as far as (hr-)timers are concerned, can be considered spurious and the relevant softirq vectors can be marked as hotplug safe. Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230912104406.312185-6-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-06scsi: sd: Differentiate system and runtime start/stop managementDamien Le Moal
commit 3cc2ffe5c16dc65dfac354bc5b5bc98d3b397567 upstream. The underlying device and driver of a SCSI disk may have different system and runtime power mode control requirements. This is because runtime power management affects only the SCSI disk, while system level power management affects all devices, including the controller for the SCSI disk. For instance, issuing a START STOP UNIT command when a SCSI disk is runtime suspended and resumed is fine: the command is translated to a STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY command to wake it up. The SCSI disk runtime operations have no effect on the ata port device used to connect the ATA disk. However, for system suspend/resume operations, the ATA port used to connect the device will also be suspended and resumed, with the resume operation requiring re-validating the device link and the device itself. In this case, issuing a VERIFY command to spinup the disk must be done before starting to revalidate the device, when the ata port is being resumed. In such case, we must not allow the SCSI disk driver to issue START STOP UNIT commands. Allow a low level driver to refine the SCSI disk start/stop management by differentiating system and runtime cases with two new SCSI device flags: manage_system_start_stop and manage_runtime_start_stop. These new flags replace the current manage_start_stop flag. Drivers setting the manage_start_stop are modifed to set both new flags, thus preserving the existing start/stop management behavior. For backward compatibility, the old manage_start_stop sysfs device attribute is kept as a read-only attribute showing a value of 1 for devices enabling both new flags and 0 otherwise. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-06ata: libata-scsi: link ata port and scsi deviceDamien Le Moal
commit fb99ef17865035a6657786d4b2af11a27ba23f9b upstream. There is no direct device ancestry defined between an ata_device and its scsi device which prevents the power management code from correctly ordering suspend and resume operations. Create such ancestry with the ata device as the parent to ensure that the scsi device (child) is suspended before the ata device and that resume handles the ata device before the scsi device. The parent-child (supplier-consumer) relationship is established between the ata_port (parent) and the scsi device (child) with the function device_add_link(). The parent used is not the ata_device as the PM operations are defined per port and the status of all devices connected through that port is controlled from the port operations. The device link is established with the new function ata_scsi_slave_alloc(), and this function is used to define the ->slave_alloc callback of the scsi host template of all ata drivers. Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-06scsi: core: ata: Do no try to probe for CDL on old drivesDamien Le Moal
commit 2132df16f53b4f01ab25f5d404f36a22244ae342 upstream. Some old drives (e.g. an Ultra320 SCSI disk as reported by John) do not seem to execute MAINTENANCE_IN / MI_REPORT_SUPPORTED_OPERATION_CODES commands correctly and hang when a non-zero service action is specified (one command format with service action case in scsi_report_opcode()). Currently, CDL probing with scsi_cdl_check_cmd() is the only caller using a non zero service action for scsi_report_opcode(). To avoid issues with these old drives, do not attempt CDL probe if the device reports support for an SPC version lower than 5 (CDL was introduced in SPC-5). To keep things working with ATA devices which probe for the CDL T2A and T2B pages introduced with SPC-6, modify ata_scsiop_inq_std() to claim SPC-6 version compatibility for ATA drives supporting CDL. SPC-6 standard version number is defined as Dh (= 13) in SPC-6 r09. Fix scsi_probe_lun() to correctly capture this value by changing the bit mask for the second byte of the INQUIRY response from 0x7 to 0xf. include/scsi/scsi.h is modified to add the definition SCSI_SPC_6 with the value 14 (Dh + 1). The missing definitions for the SCSI_SPC_4 and SCSI_SPC_5 versions are also added. Reported-by: John David Anglin <dave.anglin@bell.net> Fixes: 624885209f31 ("scsi: core: Detect support for command duration limits") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230915022034.678121-1-dlemoal@kernel.org Tested-by: David Gow <david@davidgow.net> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-06bpf: Clarify error expectations from bpf_clone_redirectStanislav Fomichev
[ Upstream commit 7cb779a6867fea00b4209bcf6de2f178a743247d ] Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped packets") exposed the fact that bpf_clone_redirect is capable of returning raw NET_XMIT_XXX return codes. This is in the conflict with its UAPI doc which says the following: "0 on success, or a negative error in case of failure." Update the UAPI to reflect the fact that bpf_clone_redirect can return positive error numbers, but don't explicitly define their meaning. Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-23 22:51:36 +0000