From 7a934b5cc3f452df6f9a4903450fc103dee98ee8 Mon Sep 17 00:00:00 2001 From: Ming Yen Hsieh Date: Mon, 30 Oct 2023 15:17:34 +0800 Subject: wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config No matter CLC is enabled or disabled, the driver should initialize the default value 0xff for channel configuration of CLC. Otherwise, the zero value would disable channels. Reported-and-tested-by: Ben Greear Closes: https://lore.kernel.org/all/2fb78387-d226-3193-8ca7-90040561b9ad@candelatech.com/ Fixes: 09382d8f8641 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed") Signed-off-by: Ming Yen Hsieh Signed-off-by: Deren Wu Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/5a976ddf1f636b5cb809373501d3cfdc6d8de3e4.1698648737.git.deren.wu@mediatek.com --- drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c index 63f3d4a5c9aa..2cc2d2788f83 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c @@ -375,6 +375,7 @@ static int mt7921_load_clc(struct mt792x_dev *dev, const char *fw_name) int ret, i, len, offset = 0; u8 *clc_base = NULL, hw_encap = 0; + dev->phy.clc_chan_conf = 0xff; if (mt7921_disable_clc || mt76_is_usb(&dev->mt76)) return 0; -- cgit v1.2.3 From ccab434e674ca95d483788b1895a70c21b7f016a Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 15 Nov 2023 11:08:57 +0100 Subject: usb: aqc111: check packet for fixup for true limit If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The issue exists since the introduction of the driver. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/aqc111.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c index a017e9de2119..7b8afa589a53 100644 --- a/drivers/net/usb/aqc111.c +++ b/drivers/net/usb/aqc111.c @@ -1079,17 +1079,17 @@ static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb) u16 pkt_count = 0; u64 desc_hdr = 0; u16 vlan_tag = 0; - u32 skb_len = 0; + u32 skb_len; if (!skb) goto err; - if (skb->len == 0) + skb_len = skb->len; + if (skb_len < sizeof(desc_hdr)) goto err; - skb_len = skb->len; /* RX Descriptor Header */ - skb_trim(skb, skb->len - sizeof(desc_hdr)); + skb_trim(skb, skb_len - sizeof(desc_hdr)); desc_hdr = le64_to_cpup((u64 *)skb_tail_pointer(skb)); /* Check these packets */ -- cgit v1.2.3 From 7fbd5fc2b35a8f559a6b380dfa9bcd964a758186 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 15 Nov 2023 11:53:31 +0100 Subject: stmmac: dwmac-loongson: Add architecture dependency Only present the DWMAC_LOONGSON option on architectures where it can actually be used. This follows the same logic as the DWMAC_INTEL option. Signed-off-by: Jean Delvare Cc: Keguang Zhang Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index a2b9e289aa36..85dcda51df05 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -280,7 +280,7 @@ config DWMAC_INTEL config DWMAC_LOONGSON tristate "Loongson PCI DWMAC support" default MACH_LOONGSON64 - depends on STMMAC_ETH && PCI + depends on (MACH_LOONGSON64 || COMPILE_TEST) && STMMAC_ETH && PCI depends on COMMON_CLK help This selects the LOONGSON PCI bus support for the stmmac driver, -- cgit v1.2.3 From 8ba2c459668cfe2aaacc5ebcd35b4b9ef8643013 Mon Sep 17 00:00:00 2001 From: Jiawen Wu Date: Fri, 17 Nov 2023 18:11:08 +0800 Subject: net: wangxun: fix kernel panic due to null pointer When the device uses a custom subsystem vendor ID, the function wx_sw_init() returns before the memory of 'wx->mac_table' is allocated. The null pointer will causes the kernel panic. Fixes: 79625f45ca73 ("net: wangxun: Move MAC address handling to libwx") Signed-off-by: Jiawen Wu Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 8 +++++--- drivers/net/ethernet/wangxun/ngbe/ngbe_main.c | 4 +--- drivers/net/ethernet/wangxun/txgbe/txgbe_main.c | 4 +--- 3 files changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index a3c5de9d547a..533e912af089 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -1769,10 +1769,12 @@ int wx_sw_init(struct wx *wx) wx->subsystem_device_id = pdev->subsystem_device; } else { err = wx_flash_read_dword(wx, 0xfffdc, &ssid); - if (!err) - wx->subsystem_device_id = swab16((u16)ssid); + if (err < 0) { + wx_err(wx, "read of internal subsystem device id failed\n"); + return err; + } - return err; + wx->subsystem_device_id = swab16((u16)ssid); } wx->mac_table = kcalloc(wx->mac.num_rar_entries, diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c index 3d43f808c86b..8db804543e66 100644 --- a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c +++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c @@ -121,10 +121,8 @@ static int ngbe_sw_init(struct wx *wx) /* PCI config space info */ err = wx_sw_init(wx); - if (err < 0) { - wx_err(wx, "read of internal subsystem device id failed\n"); + if (err < 0) return err; - } /* mac type, phy type , oem type */ ngbe_init_type_code(wx); diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c index 70f0b5c01dac..526250102db2 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c @@ -364,10 +364,8 @@ static int txgbe_sw_init(struct wx *wx) /* PCI config space info */ err = wx_sw_init(wx); - if (err < 0) { - wx_err(wx, "read of internal subsystem device id failed\n"); + if (err < 0) return err; - } txgbe_init_type_code(wx); -- cgit v1.2.3 From 93da8d75a66568ba4bb5b14ad2833acd7304cd02 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 17 Nov 2023 14:17:33 +0000 Subject: wireguard: use DEV_STATS_INC() wg_xmit() can be called concurrently, KCSAN reported [1] some device stats updates can be lost. Use DEV_STATS_INC() for this unlikely case. [1] BUG: KCSAN: data-race in wg_xmit / wg_xmit read-write to 0xffff888104239160 of 8 bytes by task 1375 on cpu 0: wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231 __netdev_start_xmit include/linux/netdevice.h:4918 [inline] netdev_start_xmit include/linux/netdevice.h:4932 [inline] xmit_one net/core/dev.c:3543 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559 ... read-write to 0xffff888104239160 of 8 bytes by task 1378 on cpu 1: wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231 __netdev_start_xmit include/linux/netdevice.h:4918 [inline] netdev_start_xmit include/linux/netdevice.h:4932 [inline] xmit_one net/core/dev.c:3543 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559 ... v2: also change wg_packet_consume_data_done() (Hangbin Liu) and wg_packet_purge_staged_packets() Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Jason A. Donenfeld Cc: Hangbin Liu Signed-off-by: Jason A. Donenfeld Reviewed-by: Hangbin Liu Signed-off-by: David S. Miller --- drivers/net/wireguard/device.c | 4 ++-- drivers/net/wireguard/receive.c | 12 ++++++------ drivers/net/wireguard/send.c | 3 ++- 3 files changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireguard/device.c b/drivers/net/wireguard/device.c index 258dcc103921..deb9636b0ecf 100644 --- a/drivers/net/wireguard/device.c +++ b/drivers/net/wireguard/device.c @@ -210,7 +210,7 @@ static netdev_tx_t wg_xmit(struct sk_buff *skb, struct net_device *dev) */ while (skb_queue_len(&peer->staged_packet_queue) > MAX_STAGED_PACKETS) { dev_kfree_skb(__skb_dequeue(&peer->staged_packet_queue)); - ++dev->stats.tx_dropped; + DEV_STATS_INC(dev, tx_dropped); } skb_queue_splice_tail(&packets, &peer->staged_packet_queue); spin_unlock_bh(&peer->staged_packet_queue.lock); @@ -228,7 +228,7 @@ err_icmp: else if (skb->protocol == htons(ETH_P_IPV6)) icmpv6_ndo_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0); err: - ++dev->stats.tx_errors; + DEV_STATS_INC(dev, tx_errors); kfree_skb(skb); return ret; } diff --git a/drivers/net/wireguard/receive.c b/drivers/net/wireguard/receive.c index 0b3f0c843550..a176653c8861 100644 --- a/drivers/net/wireguard/receive.c +++ b/drivers/net/wireguard/receive.c @@ -416,20 +416,20 @@ dishonest_packet_peer: net_dbg_skb_ratelimited("%s: Packet has unallowed src IP (%pISc) from peer %llu (%pISpfsc)\n", dev->name, skb, peer->internal_id, &peer->endpoint.addr); - ++dev->stats.rx_errors; - ++dev->stats.rx_frame_errors; + DEV_STATS_INC(dev, rx_errors); + DEV_STATS_INC(dev, rx_frame_errors); goto packet_processed; dishonest_packet_type: net_dbg_ratelimited("%s: Packet is neither ipv4 nor ipv6 from peer %llu (%pISpfsc)\n", dev->name, peer->internal_id, &peer->endpoint.addr); - ++dev->stats.rx_errors; - ++dev->stats.rx_frame_errors; + DEV_STATS_INC(dev, rx_errors); + DEV_STATS_INC(dev, rx_frame_errors); goto packet_processed; dishonest_packet_size: net_dbg_ratelimited("%s: Packet has incorrect size from peer %llu (%pISpfsc)\n", dev->name, peer->internal_id, &peer->endpoint.addr); - ++dev->stats.rx_errors; - ++dev->stats.rx_length_errors; + DEV_STATS_INC(dev, rx_errors); + DEV_STATS_INC(dev, rx_length_errors); goto packet_processed; packet_processed: dev_kfree_skb(skb); diff --git a/drivers/net/wireguard/send.c b/drivers/net/wireguard/send.c index 95c853b59e1d..0d48e0f4a1ba 100644 --- a/drivers/net/wireguard/send.c +++ b/drivers/net/wireguard/send.c @@ -333,7 +333,8 @@ err: void wg_packet_purge_staged_packets(struct wg_peer *peer) { spin_lock_bh(&peer->staged_packet_queue.lock); - peer->device->dev->stats.tx_dropped += peer->staged_packet_queue.qlen; + DEV_STATS_ADD(peer->device->dev, tx_dropped, + peer->staged_packet_queue.qlen); __skb_queue_purge(&peer->staged_packet_queue); spin_unlock_bh(&peer->staged_packet_queue.lock); } -- cgit v1.2.3 From 5f228d7c8a539714c1e9b7e7534f76bb7979f268 Mon Sep 17 00:00:00 2001 From: Suman Ghosh Date: Fri, 17 Nov 2023 16:10:18 +0530 Subject: octeontx2-pf: Fix memory leak during interface down During 'ifconfig down' one RSS memory was not getting freed. This patch fixes the same. Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support") Signed-off-by: Suman Ghosh Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 91b99fd70361..ba95ac913274 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1934,6 +1934,8 @@ int otx2_stop(struct net_device *netdev) /* Clear RSS enable flag */ rss = &pf->hw.rss_info; rss->enable = false; + if (!netif_is_rxfh_configured(netdev)) + kfree(rss->rss_ctx[DEFAULT_RSS_CONTEXT_GROUP]); /* Cleanup Queue IRQ */ vec = pci_irq_vector(pf->pdev, -- cgit v1.2.3 From 79e0c5be8c73a674c92bd4ba77b75f4f8c91d32e Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 14 Nov 2023 01:42:13 +0100 Subject: net, vrf: Move dstats structure to core Just move struct pcpu_dstats out of the vrf into the core, and streamline the field names slightly, so they better align with the {t,l}stats ones. No functional change otherwise. A conversion of the u64s to u64_stats_t could be done at a separate point in future. This move is needed as we are moving the {t,l,d}stats allocation/freeing to the core. Signed-off-by: Daniel Borkmann Reviewed-by: Nikolay Aleksandrov Cc: Jakub Kicinski Cc: David Ahern Link: https://lore.kernel.org/r/20231114004220.6495-2-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/vrf.c | 24 +++++++----------------- include/linux/netdevice.h | 10 ++++++++++ 2 files changed, 17 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index db766941b78f..3e6e0fdc3ba7 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -121,22 +121,12 @@ struct net_vrf { int ifindex; }; -struct pcpu_dstats { - u64 tx_pkts; - u64 tx_bytes; - u64 tx_drps; - u64 rx_pkts; - u64 rx_bytes; - u64 rx_drps; - struct u64_stats_sync syncp; -}; - static void vrf_rx_stats(struct net_device *dev, int len) { struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats); u64_stats_update_begin(&dstats->syncp); - dstats->rx_pkts++; + dstats->rx_packets++; dstats->rx_bytes += len; u64_stats_update_end(&dstats->syncp); } @@ -161,10 +151,10 @@ static void vrf_get_stats64(struct net_device *dev, do { start = u64_stats_fetch_begin(&dstats->syncp); tbytes = dstats->tx_bytes; - tpkts = dstats->tx_pkts; - tdrops = dstats->tx_drps; + tpkts = dstats->tx_packets; + tdrops = dstats->tx_drops; rbytes = dstats->rx_bytes; - rpkts = dstats->rx_pkts; + rpkts = dstats->rx_packets; } while (u64_stats_fetch_retry(&dstats->syncp, start)); stats->tx_bytes += tbytes; stats->tx_packets += tpkts; @@ -421,7 +411,7 @@ static int vrf_local_xmit(struct sk_buff *skb, struct net_device *dev, if (likely(__netif_rx(skb) == NET_RX_SUCCESS)) vrf_rx_stats(dev, len); else - this_cpu_inc(dev->dstats->rx_drps); + this_cpu_inc(dev->dstats->rx_drops); return NETDEV_TX_OK; } @@ -616,11 +606,11 @@ static netdev_tx_t vrf_xmit(struct sk_buff *skb, struct net_device *dev) struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats); u64_stats_update_begin(&dstats->syncp); - dstats->tx_pkts++; + dstats->tx_packets++; dstats->tx_bytes += len; u64_stats_update_end(&dstats->syncp); } else { - this_cpu_inc(dev->dstats->tx_drps); + this_cpu_inc(dev->dstats->tx_drops); } return ret; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a16c9cc063fe..98082113156e 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2755,6 +2755,16 @@ struct pcpu_sw_netstats { struct u64_stats_sync syncp; } __aligned(4 * sizeof(u64)); +struct pcpu_dstats { + u64 rx_packets; + u64 rx_bytes; + u64 rx_drops; + u64 tx_packets; + u64 tx_bytes; + u64 tx_drops; + struct u64_stats_sync syncp; +} __aligned(8 * sizeof(u64)); + struct pcpu_lstats { u64_stats_t packets; u64_stats_t bytes; -- cgit v1.2.3 From 34d21de99cea9cb17967874313e5b0262527833c Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 14 Nov 2023 01:42:14 +0100 Subject: net: Move {l,t,d}stats allocation to core and convert veth & vrf Move {l,t,d}stats allocation to the core and let netdevs pick the stats type they need. That way the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc) - all happening in the core. Co-developed-by: Jakub Kicinski Signed-off-by: Jakub Kicinski Signed-off-by: Daniel Borkmann Reviewed-by: Nikolay Aleksandrov Cc: David Ahern Link: https://lore.kernel.org/r/20231114004220.6495-3-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/veth.c | 16 ++-------------- drivers/net/vrf.c | 14 +++----------- include/linux/netdevice.h | 20 +++++++++++++++---- net/core/dev.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++- 4 files changed, 69 insertions(+), 30 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 9980517ed8b0..ac030c241d1a 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -1506,25 +1506,12 @@ static void veth_free_queues(struct net_device *dev) static int veth_dev_init(struct net_device *dev) { - int err; - - dev->lstats = netdev_alloc_pcpu_stats(struct pcpu_lstats); - if (!dev->lstats) - return -ENOMEM; - - err = veth_alloc_queues(dev); - if (err) { - free_percpu(dev->lstats); - return err; - } - - return 0; + return veth_alloc_queues(dev); } static void veth_dev_free(struct net_device *dev) { veth_free_queues(dev); - free_percpu(dev->lstats); } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -1796,6 +1783,7 @@ static void veth_setup(struct net_device *dev) NETIF_F_HW_VLAN_STAG_RX); dev->needs_free_netdev = true; dev->priv_destructor = veth_dev_free; + dev->pcpu_stat_type = NETDEV_PCPU_STAT_LSTATS; dev->max_mtu = ETH_MAX_MTU; dev->hw_features = VETH_FEATURES; diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 3e6e0fdc3ba7..bb95ce43cd97 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -1164,22 +1164,15 @@ static void vrf_dev_uninit(struct net_device *dev) vrf_rtable_release(dev, vrf); vrf_rt6_release(dev, vrf); - - free_percpu(dev->dstats); - dev->dstats = NULL; } static int vrf_dev_init(struct net_device *dev) { struct net_vrf *vrf = netdev_priv(dev); - dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats); - if (!dev->dstats) - goto out_nomem; - /* create the default dst which points back to us */ if (vrf_rtable_create(dev) != 0) - goto out_stats; + goto out_nomem; if (vrf_rt6_create(dev) != 0) goto out_rth; @@ -1193,9 +1186,6 @@ static int vrf_dev_init(struct net_device *dev) out_rth: vrf_rtable_release(dev, vrf); -out_stats: - free_percpu(dev->dstats); - dev->dstats = NULL; out_nomem: return -ENOMEM; } @@ -1694,6 +1684,8 @@ static void vrf_setup(struct net_device *dev) dev->min_mtu = IPV6_MIN_MTU; dev->max_mtu = IP6_MAX_MTU; dev->mtu = dev->max_mtu; + + dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS; } static int vrf_validate(struct nlattr *tb[], struct nlattr *data[], diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 98082113156e..2564e209465e 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1797,6 +1797,13 @@ enum netdev_ml_priv_type { ML_PRIV_CAN, }; +enum netdev_stat_type { + NETDEV_PCPU_STAT_NONE, + NETDEV_PCPU_STAT_LSTATS, /* struct pcpu_lstats */ + NETDEV_PCPU_STAT_TSTATS, /* struct pcpu_sw_netstats */ + NETDEV_PCPU_STAT_DSTATS, /* struct pcpu_dstats */ +}; + /** * struct net_device - The DEVICE structure. * @@ -1991,10 +1998,14 @@ enum netdev_ml_priv_type { * * @ml_priv: Mid-layer private * @ml_priv_type: Mid-layer private type - * @lstats: Loopback statistics - * @tstats: Tunnel statistics - * @dstats: Dummy statistics - * @vstats: Virtual ethernet statistics + * + * @pcpu_stat_type: Type of device statistics which the core should + * allocate/free: none, lstats, tstats, dstats. none + * means the driver is handling statistics allocation/ + * freeing internally. + * @lstats: Loopback statistics: packets, bytes + * @tstats: Tunnel statistics: RX/TX packets, RX/TX bytes + * @dstats: Dummy statistics: RX/TX/drop packets, RX/TX bytes * * @garp_port: GARP * @mrp_port: MRP @@ -2354,6 +2365,7 @@ struct net_device { void *ml_priv; enum netdev_ml_priv_type ml_priv_type; + enum netdev_stat_type pcpu_stat_type:8; union { struct pcpu_lstats __percpu *lstats; struct pcpu_sw_netstats __percpu *tstats; diff --git a/net/core/dev.c b/net/core/dev.c index af53f6d838ce..0cc6e283edba 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -10051,6 +10051,46 @@ void netif_tx_stop_all_queues(struct net_device *dev) } EXPORT_SYMBOL(netif_tx_stop_all_queues); +static int netdev_do_alloc_pcpu_stats(struct net_device *dev) +{ + void __percpu *v; + + switch (dev->pcpu_stat_type) { + case NETDEV_PCPU_STAT_NONE: + return 0; + case NETDEV_PCPU_STAT_LSTATS: + v = dev->lstats = netdev_alloc_pcpu_stats(struct pcpu_lstats); + break; + case NETDEV_PCPU_STAT_TSTATS: + v = dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats); + break; + case NETDEV_PCPU_STAT_DSTATS: + v = dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats); + break; + default: + return -EINVAL; + } + + return v ? 0 : -ENOMEM; +} + +static void netdev_do_free_pcpu_stats(struct net_device *dev) +{ + switch (dev->pcpu_stat_type) { + case NETDEV_PCPU_STAT_NONE: + return; + case NETDEV_PCPU_STAT_LSTATS: + free_percpu(dev->lstats); + break; + case NETDEV_PCPU_STAT_TSTATS: + free_percpu(dev->tstats); + break; + case NETDEV_PCPU_STAT_DSTATS: + free_percpu(dev->dstats); + break; + } +} + /** * register_netdevice() - register a network device * @dev: device to register @@ -10111,9 +10151,13 @@ int register_netdevice(struct net_device *dev) goto err_uninit; } + ret = netdev_do_alloc_pcpu_stats(dev); + if (ret) + goto err_uninit; + ret = dev_index_reserve(net, dev->ifindex); if (ret < 0) - goto err_uninit; + goto err_free_pcpu; dev->ifindex = ret; /* Transfer changeable features to wanted_features and enable @@ -10219,6 +10263,8 @@ err_uninit_notify: call_netdevice_notifiers(NETDEV_PRE_UNINIT, dev); err_ifindex_release: dev_index_release(net, dev->ifindex); +err_free_pcpu: + netdev_do_free_pcpu_stats(dev); err_uninit: if (dev->netdev_ops->ndo_uninit) dev->netdev_ops->ndo_uninit(dev); @@ -10471,6 +10517,7 @@ void netdev_run_todo(void) WARN_ON(rcu_access_pointer(dev->ip_ptr)); WARN_ON(rcu_access_pointer(dev->ip6_ptr)); + netdev_do_free_pcpu_stats(dev); if (dev->priv_destructor) dev->priv_destructor(dev); if (dev->needs_free_netdev) -- cgit v1.2.3 From ae1658272c6491a31ac968e39882fc569f312ac3 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 14 Nov 2023 01:42:15 +0100 Subject: netkit: Add tstats per-CPU traffic counters Add dev->tstats traffic accounting to netkit. The latter contains per-CPU RX and TX counters. The dev's TX counters are bumped upon pass/unspec as well as redirect verdicts, in other words, on everything except for drops. The dev's RX counters are bumped upon successful __netif_rx(), as well as from skb_do_redirect() (not part of this commit here). Using dev->lstats with having just a single packets/bytes counter and inferring one another's RX counters from the peer dev's lstats is not possible given skb_do_redirect() can also bump the device's stats. Signed-off-by: Daniel Borkmann Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20231114004220.6495-4-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/netkit.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/netkit.c b/drivers/net/netkit.c index 5a0f86f38f09..99de11f9cde5 100644 --- a/drivers/net/netkit.c +++ b/drivers/net/netkit.c @@ -68,6 +68,7 @@ static netdev_tx_t netkit_xmit(struct sk_buff *skb, struct net_device *dev) netdev_tx_t ret_dev = NET_XMIT_SUCCESS; const struct bpf_mprog_entry *entry; struct net_device *peer; + int len = skb->len; rcu_read_lock(); peer = rcu_dereference(nk->peer); @@ -85,15 +86,22 @@ static netdev_tx_t netkit_xmit(struct sk_buff *skb, struct net_device *dev) case NETKIT_PASS: skb->protocol = eth_type_trans(skb, skb->dev); skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN); - __netif_rx(skb); + if (likely(__netif_rx(skb) == NET_RX_SUCCESS)) { + dev_sw_netstats_tx_add(dev, 1, len); + dev_sw_netstats_rx_add(peer, len); + } else { + goto drop_stats; + } break; case NETKIT_REDIRECT: + dev_sw_netstats_tx_add(dev, 1, len); skb_do_redirect(skb); break; case NETKIT_DROP: default: drop: kfree_skb(skb); +drop_stats: dev_core_stats_tx_dropped_inc(dev); ret_dev = NET_XMIT_DROP; break; @@ -174,6 +182,13 @@ static struct net_device *netkit_peer_dev(struct net_device *dev) return rcu_dereference(netkit_priv(dev)->peer); } +static void netkit_get_stats(struct net_device *dev, + struct rtnl_link_stats64 *stats) +{ + dev_fetch_sw_netstats(stats, dev->tstats); + stats->tx_dropped = DEV_STATS_READ(dev, tx_dropped); +} + static void netkit_uninit(struct net_device *dev); static const struct net_device_ops netkit_netdev_ops = { @@ -184,6 +199,7 @@ static const struct net_device_ops netkit_netdev_ops = { .ndo_set_rx_headroom = netkit_set_headroom, .ndo_get_iflink = netkit_get_iflink, .ndo_get_peer_dev = netkit_peer_dev, + .ndo_get_stats64 = netkit_get_stats, .ndo_uninit = netkit_uninit, .ndo_features_check = passthru_features_check, }; @@ -218,6 +234,7 @@ static void netkit_setup(struct net_device *dev) ether_setup(dev); dev->max_mtu = ETH_MAX_MTU; + dev->pcpu_stat_type = NETDEV_PCPU_STAT_TSTATS; dev->flags |= IFF_NOARP; dev->priv_flags &= ~IFF_TX_SKB_SHARING; -- cgit v1.2.3 From 6f2684bf2b4460c84d0d34612a939f78b96b03fc Mon Sep 17 00:00:00 2001 From: Peilin Ye Date: Tue, 14 Nov 2023 01:42:16 +0100 Subject: veth: Use tstats per-CPU traffic counters Currently veth devices use the lstats per-CPU traffic counters, which only cover TX traffic. veth_get_stats64() actually populates RX stats of a veth device from its peer's TX counters, based on the assumption that a veth device can _only_ receive packets from its peer, which is no longer true: For example, recent CNIs (like Cilium) can use the bpf_redirect_peer() BPF helper to redirect traffic from NIC's tc ingress to veth's tc ingress (in a different netns), skipping veth's peer device. Unfortunately, this kind of traffic isn't currently accounted for in veth's RX stats. In preparation for the fix, use tstats (instead of lstats) to maintain both RX and TX counters for each veth device. We'll use RX counters for bpf_redirect_peer() traffic, and keep using TX counters for the usual "peer-to-peer" traffic. In veth_get_stats64(), calculate RX stats by _adding_ RX count to peer's TX count, in order to cover both kinds of traffic. veth_stats_rx() might need a name change (perhaps to "veth_stats_xdp()") for less confusion, but let's leave it to another patch to keep the fix minimal. Signed-off-by: Peilin Ye Co-developed-by: Daniel Borkmann Signed-off-by: Daniel Borkmann Reviewed-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20231114004220.6495-5-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/veth.c | 30 +++++++++++------------------- 1 file changed, 11 insertions(+), 19 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/veth.c b/drivers/net/veth.c index ac030c241d1a..6cc352296c67 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -373,7 +373,7 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) skb_tx_timestamp(skb); if (likely(veth_forward_skb(rcv, skb, rq, use_napi) == NET_RX_SUCCESS)) { if (!use_napi) - dev_lstats_add(dev, length); + dev_sw_netstats_tx_add(dev, 1, length); else __veth_xdp_flush(rq); } else { @@ -387,14 +387,6 @@ drop: return ret; } -static u64 veth_stats_tx(struct net_device *dev, u64 *packets, u64 *bytes) -{ - struct veth_priv *priv = netdev_priv(dev); - - dev_lstats_read(dev, packets, bytes); - return atomic64_read(&priv->dropped); -} - static void veth_stats_rx(struct veth_stats *result, struct net_device *dev) { struct veth_priv *priv = netdev_priv(dev); @@ -432,24 +424,24 @@ static void veth_get_stats64(struct net_device *dev, struct veth_priv *priv = netdev_priv(dev); struct net_device *peer; struct veth_stats rx; - u64 packets, bytes; - tot->tx_dropped = veth_stats_tx(dev, &packets, &bytes); - tot->tx_bytes = bytes; - tot->tx_packets = packets; + tot->tx_dropped = atomic64_read(&priv->dropped); + dev_fetch_sw_netstats(tot, dev->tstats); veth_stats_rx(&rx, dev); tot->tx_dropped += rx.xdp_tx_err; tot->rx_dropped = rx.rx_drops + rx.peer_tq_xdp_xmit_err; - tot->rx_bytes = rx.xdp_bytes; - tot->rx_packets = rx.xdp_packets; + tot->rx_bytes += rx.xdp_bytes; + tot->rx_packets += rx.xdp_packets; rcu_read_lock(); peer = rcu_dereference(priv->peer); if (peer) { - veth_stats_tx(peer, &packets, &bytes); - tot->rx_bytes += bytes; - tot->rx_packets += packets; + struct rtnl_link_stats64 tot_peer = {}; + + dev_fetch_sw_netstats(&tot_peer, peer->tstats); + tot->rx_bytes += tot_peer.tx_bytes; + tot->rx_packets += tot_peer.tx_packets; veth_stats_rx(&rx, peer); tot->tx_dropped += rx.peer_tq_xdp_xmit_err; @@ -1783,7 +1775,7 @@ static void veth_setup(struct net_device *dev) NETIF_F_HW_VLAN_STAG_RX); dev->needs_free_netdev = true; dev->priv_destructor = veth_dev_free; - dev->pcpu_stat_type = NETDEV_PCPU_STAT_LSTATS; + dev->pcpu_stat_type = NETDEV_PCPU_STAT_TSTATS; dev->max_mtu = ETH_MAX_MTU; dev->hw_features = VETH_FEATURES; -- cgit v1.2.3 From 2c225425704078282e152ba692649237f78b3d7a Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 14 Nov 2023 01:42:18 +0100 Subject: bpf, netkit: Add indirect call wrapper for fetching peer dev ndo_get_peer_dev is used in tcx BPF fast path, therefore make use of indirect call wrapper and therefore optimize the bpf_redirect_peer() internal handling a bit. Add a small skb_get_peer_dev() wrapper which utilizes the INDIRECT_CALL_1() macro instead of open coding. Future work could potentially add a peer pointer directly into struct net_device in future and convert veth and netkit over to use it so that eventually ndo_get_peer_dev can be removed. Co-developed-by: Nikolay Aleksandrov Signed-off-by: Nikolay Aleksandrov Signed-off-by: Daniel Borkmann Acked-by: Stanislav Fomichev Link: https://lore.kernel.org/r/20231114004220.6495-7-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/netkit.c | 3 ++- include/net/netkit.h | 6 ++++++ net/core/filter.c | 18 +++++++++++++----- 3 files changed, 21 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netkit.c b/drivers/net/netkit.c index 99de11f9cde5..97bd6705c241 100644 --- a/drivers/net/netkit.c +++ b/drivers/net/netkit.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include @@ -177,7 +178,7 @@ out: rcu_read_unlock(); } -static struct net_device *netkit_peer_dev(struct net_device *dev) +INDIRECT_CALLABLE_SCOPE struct net_device *netkit_peer_dev(struct net_device *dev) { return rcu_dereference(netkit_priv(dev)->peer); } diff --git a/include/net/netkit.h b/include/net/netkit.h index 0ba2e6b847ca..9ec0163739f4 100644 --- a/include/net/netkit.h +++ b/include/net/netkit.h @@ -10,6 +10,7 @@ int netkit_prog_attach(const union bpf_attr *attr, struct bpf_prog *prog); int netkit_link_attach(const union bpf_attr *attr, struct bpf_prog *prog); int netkit_prog_detach(const union bpf_attr *attr, struct bpf_prog *prog); int netkit_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr); +INDIRECT_CALLABLE_DECLARE(struct net_device *netkit_peer_dev(struct net_device *dev)); #else static inline int netkit_prog_attach(const union bpf_attr *attr, struct bpf_prog *prog) @@ -34,5 +35,10 @@ static inline int netkit_prog_query(const union bpf_attr *attr, { return -EINVAL; } + +static inline struct net_device *netkit_peer_dev(struct net_device *dev) +{ + return NULL; +} #endif /* CONFIG_NETKIT */ #endif /* __NET_NETKIT_H */ diff --git a/net/core/filter.c b/net/core/filter.c index cca810987c8d..7e4d7c3bcc84 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -81,6 +81,7 @@ #include #include #include +#include #include #include "dev.h" @@ -2468,6 +2469,16 @@ static const struct bpf_func_proto bpf_clone_redirect_proto = { DEFINE_PER_CPU(struct bpf_redirect_info, bpf_redirect_info); EXPORT_PER_CPU_SYMBOL_GPL(bpf_redirect_info); +static struct net_device *skb_get_peer_dev(struct net_device *dev) +{ + const struct net_device_ops *ops = dev->netdev_ops; + + if (likely(ops->ndo_get_peer_dev)) + return INDIRECT_CALL_1(ops->ndo_get_peer_dev, + netkit_peer_dev, dev); + return NULL; +} + int skb_do_redirect(struct sk_buff *skb) { struct bpf_redirect_info *ri = this_cpu_ptr(&bpf_redirect_info); @@ -2481,12 +2492,9 @@ int skb_do_redirect(struct sk_buff *skb) if (unlikely(!dev)) goto out_drop; if (flags & BPF_F_PEER) { - const struct net_device_ops *ops = dev->netdev_ops; - - if (unlikely(!ops->ndo_get_peer_dev || - !skb_at_tc_ingress(skb))) + if (unlikely(!skb_at_tc_ingress(skb))) goto out_drop; - dev = ops->ndo_get_peer_dev(dev); + dev = skb_get_peer_dev(dev); if (unlikely(!dev || !(dev->flags & IFF_UP) || net_eq(net, dev_net(dev)))) -- cgit v1.2.3 From d30fb712e52964f2cf9a9c14cf67078394044837 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Sun, 19 Nov 2023 08:23:41 -0800 Subject: hv_netvsc: fix race of netvsc and VF register_netdevice The rtnl lock also needs to be held before rndis_filter_device_add() which advertises nvsp_2_vsc_capability / sriov bit, and triggers VF NIC offering and registering. If VF NIC finished register_netdev() earlier it may cause name based config failure. To fix this issue, move the call to rtnl_lock() before rndis_filter_device_add(), so VF will be registered later than netvsc / synthetic NIC, and gets a name numbered (ethX) after netvsc. Cc: stable@vger.kernel.org Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()") Reported-by: Dexuan Cui Signed-off-by: Haiyang Zhang Reviewed-by: Wojciech Drewek Reviewed-by: Simon Horman Reviewed-by: Dexuan Cui Signed-off-by: Paolo Abeni --- drivers/net/hyperv/netvsc_drv.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 3ba3c8fb28a5..5e528a76f5f5 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2531,15 +2531,6 @@ static int netvsc_probe(struct hv_device *dev, goto devinfo_failed; } - nvdev = rndis_filter_device_add(dev, device_info); - if (IS_ERR(nvdev)) { - ret = PTR_ERR(nvdev); - netdev_err(net, "unable to add netvsc device (ret %d)\n", ret); - goto rndis_failed; - } - - eth_hw_addr_set(net, device_info->mac_adr); - /* We must get rtnl lock before scheduling nvdev->subchan_work, * otherwise netvsc_subchan_work() can get rtnl lock first and wait * all subchannels to show up, but that may not happen because @@ -2547,9 +2538,23 @@ static int netvsc_probe(struct hv_device *dev, * -> ... -> device_add() -> ... -> __device_attach() can't get * the device lock, so all the subchannels can't be processed -- * finally netvsc_subchan_work() hangs forever. + * + * The rtnl lock also needs to be held before rndis_filter_device_add() + * which advertises nvsp_2_vsc_capability / sriov bit, and triggers + * VF NIC offering and registering. If VF NIC finished register_netdev() + * earlier it may cause name based config failure. */ rtnl_lock(); + nvdev = rndis_filter_device_add(dev, device_info); + if (IS_ERR(nvdev)) { + ret = PTR_ERR(nvdev); + netdev_err(net, "unable to add netvsc device (ret %d)\n", ret); + goto rndis_failed; + } + + eth_hw_addr_set(net, device_info->mac_adr); + if (nvdev->num_chn > 1) schedule_work(&nvdev->subchan_work); @@ -2586,9 +2591,9 @@ static int netvsc_probe(struct hv_device *dev, return 0; register_failed: - rtnl_unlock(); rndis_filter_device_remove(dev, nvdev); rndis_failed: + rtnl_unlock(); netvsc_devinfo_put(device_info); devinfo_failed: free_percpu(net_device_ctx->vf_stats); -- cgit v1.2.3 From 85520856466ed6bc3b1ccb013cddac70ceb437db Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Sun, 19 Nov 2023 08:23:42 -0800 Subject: hv_netvsc: Fix race of register_netdevice_notifier and VF register If VF NIC is registered earlier, NETDEV_REGISTER event is replayed, but NETDEV_POST_INIT is not. Move register_netdevice_notifier() earlier, so the call back function is set before probing. Cc: stable@vger.kernel.org Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()") Reported-by: Dexuan Cui Signed-off-by: Haiyang Zhang Reviewed-by: Wojciech Drewek Reviewed-by: Dexuan Cui Signed-off-by: Paolo Abeni --- drivers/net/hyperv/netvsc_drv.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 5e528a76f5f5..b7dfd51f09e6 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2793,12 +2793,17 @@ static int __init netvsc_drv_init(void) } netvsc_ring_bytes = ring_size * PAGE_SIZE; + register_netdevice_notifier(&netvsc_netdev_notifier); + ret = vmbus_driver_register(&netvsc_drv); if (ret) - return ret; + goto err_vmbus_reg; - register_netdevice_notifier(&netvsc_netdev_notifier); return 0; + +err_vmbus_reg: + unregister_netdevice_notifier(&netvsc_netdev_notifier); + return ret; } MODULE_LICENSE("GPL"); -- cgit v1.2.3 From c807d6cd089d2f4951baa838081ec5ae3e2360f8 Mon Sep 17 00:00:00 2001 From: Long Li Date: Sun, 19 Nov 2023 08:23:43 -0800 Subject: hv_netvsc: Mark VF as slave before exposing it to user-mode When a VF is being exposed form the kernel, it should be marked as "slave" before exposing to the user-mode. The VF is not usable without netvsc running as master. The user-mode should never see a VF without the "slave" flag. This commit moves the code of setting the slave flag to the time before VF is exposed to user-mode. Cc: stable@vger.kernel.org Fixes: 0c195567a8f6 ("netvsc: transparent VF management") Signed-off-by: Long Li Signed-off-by: Haiyang Zhang Acked-by: Stephen Hemminger Acked-by: Dexuan Cui Signed-off-by: Paolo Abeni --- drivers/net/hyperv/netvsc_drv.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index b7dfd51f09e6..706ea5263e87 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2206,9 +2206,6 @@ static int netvsc_vf_join(struct net_device *vf_netdev, goto upper_link_failed; } - /* set slave flag before open to prevent IPv6 addrconf */ - vf_netdev->flags |= IFF_SLAVE; - schedule_delayed_work(&ndev_ctx->vf_takeover, VF_TAKEOVER_INT); call_netdevice_notifiers(NETDEV_JOIN, vf_netdev); @@ -2315,16 +2312,18 @@ static struct net_device *get_netvsc_byslot(const struct net_device *vf_netdev) } - /* Fallback path to check synthetic vf with - * help of mac addr + /* Fallback path to check synthetic vf with help of mac addr. + * Because this function can be called before vf_netdev is + * initialized (NETDEV_POST_INIT) when its perm_addr has not been copied + * from dev_addr, also try to match to its dev_addr. + * Note: On Hyper-V and Azure, it's not possible to set a MAC address + * on a VF that matches to the MAC of a unrelated NETVSC device. */ list_for_each_entry(ndev_ctx, &netvsc_dev_list, list) { ndev = hv_get_drvdata(ndev_ctx->device_ctx); - if (ether_addr_equal(vf_netdev->perm_addr, ndev->perm_addr)) { - netdev_notice(vf_netdev, - "falling back to mac addr based matching\n"); + if (ether_addr_equal(vf_netdev->perm_addr, ndev->perm_addr) || + ether_addr_equal(vf_netdev->dev_addr, ndev->perm_addr)) return ndev; - } } netdev_notice(vf_netdev, @@ -2332,6 +2331,19 @@ static struct net_device *get_netvsc_byslot(const struct net_device *vf_netdev) return NULL; } +static int netvsc_prepare_bonding(struct net_device *vf_netdev) +{ + struct net_device *ndev; + + ndev = get_netvsc_byslot(vf_netdev); + if (!ndev) + return NOTIFY_DONE; + + /* set slave flag before open to prevent IPv6 addrconf */ + vf_netdev->flags |= IFF_SLAVE; + return NOTIFY_DONE; +} + static int netvsc_register_vf(struct net_device *vf_netdev) { struct net_device_context *net_device_ctx; @@ -2758,6 +2770,8 @@ static int netvsc_netdev_event(struct notifier_block *this, return NOTIFY_DONE; switch (event) { + case NETDEV_POST_INIT: + return netvsc_prepare_bonding(event_dev); case NETDEV_REGISTER: return netvsc_register_vf(event_dev); case NETDEV_UNREGISTER: -- cgit v1.2.3 From 0739af07d1d947af27c877f797cb82ceee702515 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez Date: Mon, 20 Nov 2023 13:06:29 +0100 Subject: net: usb: ax88179_178a: fix failed operations during ax88179_reset Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device, the following test cycle has been implemented: - power on - check logs - shutdown - after detecting the system shutdown, disconnect power - after approximately 60 seconds of sleep, power is restored Running some cycles, sometimes error logs like this appear: kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19 kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19 ... These failed operation are happening during ax88179_reset execution, so the initialization could not be correct. In order to avoid this, we need to increase the delay after reset and clock initial operations. By using these larger values, many cycles have been run and no failed operations appear. It would be better to check some status register to verify when the operation has finished, but I do not have found any available information (neither in the public datasheets nor in the manufacturer's driver). The only available information for the necessary delays is the maufacturer's driver (original values) but the proposed values are not enough for the tested devices. Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Reported-by: Herb Wei Tested-by: Herb Wei Signed-off-by: Jose Ignacio Tornos Martinez Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/ax88179_178a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index aff39bf3161d..4ea0e155bb0d 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1583,11 +1583,11 @@ static int ax88179_reset(struct usbnet *dev) *tmp16 = AX_PHYPWR_RSTCTL_IPRL; ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16); - msleep(200); + msleep(500); *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS; ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp); - msleep(100); + msleep(200); /* Ethernet PHY Auto Detach*/ ax88179_auto_detach(dev); -- cgit v1.2.3 From 6a26310273c323380da21eb23fcfd50e31140913 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 21 Nov 2023 09:09:33 +0100 Subject: Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df. I couldn't reproduce the reported issue. What I did, based on a pcap packet log provided by the reporter: - Used same chip version (RTL8168h) - Set MAC address to the one used on the reporters system - Replayed the EAPOL unicast packet that, according to the reporter, was filtered out by the mc filter. The packet was properly received. Therefore the root cause of the reported issue seems to be somewhere else. Disabling mc filtering completely for the most common chip version is a quite big hammer. Therefore revert the change and wait for further analysis results from the reporter. Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index b9bb1d2f0237..295366a85c63 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -2599,9 +2599,7 @@ static void rtl_set_rx_mode(struct net_device *dev) rx_mode &= ~AcceptMulticast; } else if (netdev_mc_count(dev) > MC_FILTER_LIMIT || dev->flags & IFF_ALLMULTI || - tp->mac_version == RTL_GIGA_MAC_VER_35 || - tp->mac_version == RTL_GIGA_MAC_VER_46 || - tp->mac_version == RTL_GIGA_MAC_VER_48) { + tp->mac_version == RTL_GIGA_MAC_VER_35) { /* accept all multicasts */ } else if (netdev_mc_empty(dev)) { rx_mode &= ~AcceptMulticast; -- cgit v1.2.3 From 695bfba7ca781dd41b5225148cc8cebd74c553c2 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Mon, 13 Nov 2023 11:06:33 +0100 Subject: wifi: mt76: mt7925: fix typo in mt7925_init_he_caps Use iftype for interface type switch in mt7925_init_he_caps routine. This found during code review but later Coverity reported this with id 1549845. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/7de6e939dc75ee08f05bf1ee73253aa7eeccf28e.1699869649.git.lorenzo@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7925/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c index 15c2fb0bcb1b..aa918b9b0469 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c @@ -14,7 +14,7 @@ static void mt7925_init_he_caps(struct mt792x_phy *phy, enum nl80211_band band, struct ieee80211_sband_iftype_data *data, - enum nl80211_iftype iftype) + enum nl80211_iftype iftype) { struct ieee80211_sta_he_cap *he_cap = &data->he_cap; struct ieee80211_he_cap_elem *he_cap_elem = &he_cap->he_cap_elem; @@ -53,7 +53,7 @@ mt7925_init_he_caps(struct mt792x_phy *phy, enum nl80211_band band, IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO | IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO; - switch (i) { + switch (iftype) { case NL80211_IFTYPE_AP: he_cap_elem->mac_cap_info[2] |= IEEE80211_HE_MAC_CAP2_BSR; -- cgit v1.2.3 From 99360d9620f09fb8bc15548d855011bbb198c680 Mon Sep 17 00:00:00 2001 From: Lech Perczak Date: Sat, 18 Nov 2023 00:19:18 +0100 Subject: net: usb: qmi_wwan: claim interface 4 for ZTE MF290 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver. The proper configuration is: Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Cc: Bjørn Mork Signed-off-by: Lech Perczak Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 344af3c5c836..e2e181378f41 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1289,6 +1289,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x0168, 4)}, {QMI_FIXED_INTF(0x19d2, 0x0176, 3)}, {QMI_FIXED_INTF(0x19d2, 0x0178, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0189, 4)}, /* ZTE MF290 */ {QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */ {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */ {QMI_FIXED_INTF(0x19d2, 0x0200, 1)}, -- cgit v1.2.3 From 4aa1d8f89b10cdc25a231dabf808d8935e0b137a Mon Sep 17 00:00:00 2001 From: Suman Ghosh Date: Tue, 21 Nov 2023 22:26:24 +0530 Subject: octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF It is possible to add a ntuple rule which would like to direct packet to a VF whose number of queues are greater/less than its PF's queue numbers. For example a PF can have 2 Rx queues but a VF created on that PF can have 8 Rx queues. As of today, ntuple rule will reject rule because it is checking the requested queue number against PF's number of Rx queues. As a part of this fix if the action of a ntuple rule is to move a packet to a VF's queue then the check is removed. Also, a debug information is printed to aware user that it is user's responsibility to cross check if the requested queue number on that VF is a valid one. Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters") Signed-off-by: Suman Ghosh Reviewed-by: Wojciech Drewek Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com Signed-off-by: Paolo Abeni --- .../net/ethernet/marvell/octeontx2/nic/otx2_flows.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c index 4762dbea64a1..97a71e9b8563 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c @@ -1088,6 +1088,7 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc) struct ethhdr *eth_hdr; bool new = false; int err = 0; + u64 vf_num; u32 ring; if (!flow_cfg->max_flows) { @@ -1100,7 +1101,21 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc) if (!(pfvf->flags & OTX2_FLAG_NTUPLE_SUPPORT)) return -ENOMEM; - if (ring >= pfvf->hw.rx_queues && fsp->ring_cookie != RX_CLS_FLOW_DISC) + /* Number of queues on a VF can be greater or less than + * the PF's queue. Hence no need to check for the + * queue count. Hence no need to check queue count if PF + * is installing for its VF. Below is the expected vf_num value + * based on the ethtool commands. + * + * e.g. + * 1. ethtool -U ... action -1 ==> vf_num:255 + * 2. ethtool -U ... action ==> vf_num:0 + * 3. ethtool -U ... vf queue ==> + * vf_num:vf_idx+1 + */ + vf_num = ethtool_get_flow_spec_ring_vf(fsp->ring_cookie); + if (!is_otx2_vf(pfvf->pcifunc) && !vf_num && + ring >= pfvf->hw.rx_queues && fsp->ring_cookie != RX_CLS_FLOW_DISC) return -EINVAL; if (fsp->location >= otx2_get_maxflows(flow_cfg)) @@ -1182,6 +1197,9 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc) flow_cfg->nr_flows++; } + if (flow->is_vf) + netdev_info(pfvf->netdev, + "Make sure that VF's queue number is within its queue limit\n"); return 0; } -- cgit v1.2.3 From 818ad9cc90d4a7165caaee7e32800c50d0564ec3 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 21 Nov 2023 20:08:44 +0100 Subject: net: veth: fix ethtool stats reporting Fix a possible misalignment between page_pool stats and tx xdp_stats reported in veth_get_ethtool_stats routine. The issue can be reproduced configuring the veth pair with the following tx/rx queues: $ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \ numtxqueues 1 numrxqueues 1 and loading a simple XDP program on v0 that just returns XDP_PASS. In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1. Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN since we always report xdp_stats for all tx queues in ethtool. Fixes: 4fc418053ec7 ("net: veth: add page_pool stats") Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni --- drivers/net/veth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 6cc352296c67..57efb3454c57 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -236,8 +236,8 @@ static void veth_get_ethtool_stats(struct net_device *dev, data[tx_idx + j] += *(u64 *)(base + offset); } } while (u64_stats_fetch_retry(&rq_stats->syncp, start)); - pp_idx = tx_idx + VETH_TQ_STATS_LEN; } + pp_idx = idx + dev->real_num_tx_queues * VETH_TQ_STATS_LEN; page_pool_stats: veth_get_page_pool_stats(dev, &data[pp_idx]); -- cgit v1.2.3 From 676ec53844cbdf2f47e68a076cdff7f0ec6cbe3f Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Wed, 22 Nov 2023 00:44:33 +0530 Subject: amd-xgbe: handle corner-case during sfp hotplug Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues. Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by: Shyam Sundar S K Signed-off-by: Raju Rangoju Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c index 32d2c6fac652..4a2dc705b528 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c @@ -1193,7 +1193,19 @@ static int xgbe_phy_config_fixed(struct xgbe_prv_data *pdata) if (pdata->phy.duplex != DUPLEX_FULL) return -EINVAL; - xgbe_set_mode(pdata, mode); + /* Force the mode change for SFI in Fixed PHY config. + * Fixed PHY configs needs PLL to be enabled while doing mode set. + * When the SFP module isn't connected during boot, driver assumes + * AN is ON and attempts autonegotiation. However, if the connected + * SFP comes up in Fixed PHY config, the link will not come up as + * PLL isn't enabled while the initial mode set command is issued. + * So, force the mode change for SFI in Fixed PHY configuration to + * fix link issues. + */ + if (mode == XGBE_MODE_SFI) + xgbe_change_mode(pdata, mode); + else + xgbe_set_mode(pdata, mode); return 0; } -- cgit v1.2.3 From 7121205d5330c6a3cb3379348886d47c77b78d06 Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Wed, 22 Nov 2023 00:44:34 +0530 Subject: amd-xgbe: handle the corner-case during tx completion The existing implementation uses software logic to accumulate tx completions until the specified time (1ms) is met and then poll them. However, there exists a tiny gap which leads to a race between resetting and checking the tx_activate flag. Due to this the tx completions are not reported to upper layer and tx queue timeout kicks-in restarting the device. To address this, introduce a tx cleanup mechanism as part of the periodic maintenance process. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Acked-by: Shyam Sundar S K Signed-off-by: Raju Rangoju Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 614c0278419b..6b73648b3779 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -682,10 +682,24 @@ static void xgbe_service(struct work_struct *work) static void xgbe_service_timer(struct timer_list *t) { struct xgbe_prv_data *pdata = from_timer(pdata, t, service_timer); + struct xgbe_channel *channel; + unsigned int i; queue_work(pdata->dev_workqueue, &pdata->service_work); mod_timer(&pdata->service_timer, jiffies + HZ); + + if (!pdata->tx_usecs) + return; + + for (i = 0; i < pdata->channel_count; i++) { + channel = pdata->channel[i]; + if (!channel->tx_ring || channel->tx_timer_active) + break; + channel->tx_timer_active = 1; + mod_timer(&channel->tx_timer, + jiffies + usecs_to_jiffies(pdata->tx_usecs)); + } } static void xgbe_init_timers(struct xgbe_prv_data *pdata) -- cgit v1.2.3 From 7a2323ac24a50311f64a3a9b54ed5bef5821ecae Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Wed, 22 Nov 2023 00:44:35 +0530 Subject: amd-xgbe: propagate the correct speed and duplex status xgbe_get_link_ksettings() does not propagate correct speed and duplex information to ethtool during cable unplug. Due to which ethtool reports incorrect values for speed and duplex. Address this by propagating correct information. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Acked-by: Shyam Sundar S K Signed-off-by: Raju Rangoju Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c index 6e83ff59172a..32fab5e77246 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c @@ -314,10 +314,15 @@ static int xgbe_get_link_ksettings(struct net_device *netdev, cmd->base.phy_address = pdata->phy.address; - cmd->base.autoneg = pdata->phy.autoneg; - cmd->base.speed = pdata->phy.speed; - cmd->base.duplex = pdata->phy.duplex; + if (netif_carrier_ok(netdev)) { + cmd->base.speed = pdata->phy.speed; + cmd->base.duplex = pdata->phy.duplex; + } else { + cmd->base.speed = SPEED_UNKNOWN; + cmd->base.duplex = DUPLEX_UNKNOWN; + } + cmd->base.autoneg = pdata->phy.autoneg; cmd->base.port = PORT_NONE; XGBE_LM_COPY(cmd, supported, lks, supported); -- cgit v1.2.3 From 0ffb08b1a45bd6b7694e01da0e1d9e3e788418fb Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 21 Nov 2023 13:12:55 -0800 Subject: ice: remove ptp_tx ring parameter flag Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller Reviewed-by: Jesse Brandeburg Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Paolo Abeni --- drivers/net/ethernet/intel/ice/ice_ptp.c | 14 -------------- drivers/net/ethernet/intel/ice/ice_txrx.c | 3 --- drivers/net/ethernet/intel/ice/ice_txrx.h | 1 - 3 files changed, 18 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c index 1eddcbe89b0c..affd90622a68 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp.c @@ -280,20 +280,6 @@ static void ice_ptp_configure_tx_tstamp(struct ice_pf *pf, bool on) */ static void ice_set_tx_tstamp(struct ice_pf *pf, bool on) { - struct ice_vsi *vsi; - u16 i; - - vsi = ice_get_main_vsi(pf); - if (!vsi) - return; - - /* Set the timestamp enable flag for all the Tx rings */ - ice_for_each_txq(vsi, i) { - if (!vsi->tx_rings[i]) - continue; - vsi->tx_rings[i]->ptp_tx = on; - } - if (pf->ptp.tx_interrupt_mode == ICE_PTP_TX_INTERRUPT_SELF) ice_ptp_configure_tx_tstamp(pf, on); diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c index 52d0a126eb61..9e97ea863068 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.c +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c @@ -2306,9 +2306,6 @@ ice_tstamp(struct ice_tx_ring *tx_ring, struct sk_buff *skb, if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))) return; - if (!tx_ring->ptp_tx) - return; - /* Tx timestamps cannot be sampled when doing TSO */ if (first->tx_flags & ICE_TX_FLAGS_TSO) return; diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h index 166413fc33f4..daf7b9dbb143 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.h +++ b/drivers/net/ethernet/intel/ice/ice_txrx.h @@ -380,7 +380,6 @@ struct ice_tx_ring { #define ICE_TX_FLAGS_RING_VLAN_L2TAG2 BIT(2) u8 flags; u8 dcb_tc; /* Traffic class of ring */ - u8 ptp_tx; } ____cacheline_internodealigned_in_smp; static inline bool ice_ring_uses_build_skb(struct ice_rx_ring *ring) -- cgit v1.2.3 From 7d606a1e2d0575b6c3a2600f43f90d1e409f9661 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 21 Nov 2023 13:12:56 -0800 Subject: ice: unify logic for programming PFINT_TSYN_MSK Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") Signed-off-by: Jacob Keller Reviewed-by: Jesse Brandeburg Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Paolo Abeni --- drivers/net/ethernet/intel/ice/ice_ptp.c | 60 ++++++++++++++++++-------------- 1 file changed, 34 insertions(+), 26 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c index affd90622a68..624d05b4bbd9 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp.c @@ -256,21 +256,42 @@ ice_verify_pin_e810t(struct ptp_clock_info *info, unsigned int pin, } /** - * ice_ptp_configure_tx_tstamp - Enable or disable Tx timestamp interrupt - * @pf: The PF pointer to search in - * @on: bool value for whether timestamp interrupt is enabled or disabled + * ice_ptp_cfg_tx_interrupt - Configure Tx timestamp interrupt for the device + * @pf: Board private structure + * + * Program the device to respond appropriately to the Tx timestamp interrupt + * cause. */ -static void ice_ptp_configure_tx_tstamp(struct ice_pf *pf, bool on) +static void ice_ptp_cfg_tx_interrupt(struct ice_pf *pf) { + struct ice_hw *hw = &pf->hw; + bool enable; u32 val; + switch (pf->ptp.tx_interrupt_mode) { + case ICE_PTP_TX_INTERRUPT_ALL: + /* React to interrupts across all quads. */ + wr32(hw, PFINT_TSYN_MSK + (0x4 * hw->pf_id), (u32)0x1f); + enable = true; + break; + case ICE_PTP_TX_INTERRUPT_NONE: + /* Do not react to interrupts on any quad. */ + wr32(hw, PFINT_TSYN_MSK + (0x4 * hw->pf_id), (u32)0x0); + enable = false; + break; + case ICE_PTP_TX_INTERRUPT_SELF: + default: + enable = pf->ptp.tstamp_config.tx_type == HWTSTAMP_TX_ON; + break; + } + /* Configure the Tx timestamp interrupt */ - val = rd32(&pf->hw, PFINT_OICR_ENA); - if (on) + val = rd32(hw, PFINT_OICR_ENA); + if (enable) val |= PFINT_OICR_TSYN_TX_M; else val &= ~PFINT_OICR_TSYN_TX_M; - wr32(&pf->hw, PFINT_OICR_ENA, val); + wr32(hw, PFINT_OICR_ENA, val); } /** @@ -280,10 +301,9 @@ static void ice_ptp_configure_tx_tstamp(struct ice_pf *pf, bool on) */ static void ice_set_tx_tstamp(struct ice_pf *pf, bool on) { - if (pf->ptp.tx_interrupt_mode == ICE_PTP_TX_INTERRUPT_SELF) - ice_ptp_configure_tx_tstamp(pf, on); - pf->ptp.tstamp_config.tx_type = on ? HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF; + + ice_ptp_cfg_tx_interrupt(pf); } /** @@ -2789,15 +2809,7 @@ static int ice_ptp_init_owner(struct ice_pf *pf) /* Release the global hardware lock */ ice_ptp_unlock(hw); - if (pf->ptp.tx_interrupt_mode == ICE_PTP_TX_INTERRUPT_ALL) { - /* The clock owner for this device type handles the timestamp - * interrupt for all ports. - */ - ice_ptp_configure_tx_tstamp(pf, true); - - /* React on all quads interrupts for E82x */ - wr32(hw, PFINT_TSYN_MSK + (0x4 * hw->pf_id), (u32)0x1f); - + if (!ice_is_e810(hw)) { /* Enable quad interrupts */ err = ice_ptp_tx_ena_intr(pf, true, itr); if (err) @@ -2867,13 +2879,6 @@ static int ice_ptp_init_port(struct ice_pf *pf, struct ice_ptp_port *ptp_port) case ICE_PHY_E810: return ice_ptp_init_tx_e810(pf, &ptp_port->tx); case ICE_PHY_E822: - /* Non-owner PFs don't react to any interrupts on E82x, - * neither on own quad nor on others - */ - if (!ice_ptp_pf_handles_tx_interrupt(pf)) { - ice_ptp_configure_tx_tstamp(pf, false); - wr32(hw, PFINT_TSYN_MSK + (0x4 * hw->pf_id), (u32)0x0); - } kthread_init_delayed_work(&ptp_port->ov_work, ice_ptp_wait_for_offsets); @@ -3018,6 +3023,9 @@ void ice_ptp_init(struct ice_pf *pf) /* Start the PHY timestamping block */ ice_ptp_reset_phy_timestamping(pf); + /* Configure initial Tx interrupt settings */ + ice_ptp_cfg_tx_interrupt(pf); + set_bit(ICE_FLAG_PTP, pf->flags); err = ice_ptp_init_work(pf, ptp); if (err) -- cgit v1.2.3 From 7758017911a4f2578d54c318e8fe77bcb5899054 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 21 Nov 2023 13:12:57 -0800 Subject: ice: restore timestamp configuration after device reset The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller Reviewed-by: Jesse Brandeburg Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Paolo Abeni --- drivers/net/ethernet/intel/ice/ice_main.c | 12 ++--- drivers/net/ethernet/intel/ice/ice_ptp.c | 74 +++++++++++++++++++------------ drivers/net/ethernet/intel/ice/ice_ptp.h | 5 +-- 3 files changed, 51 insertions(+), 40 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 6607fa6fe556..fb9c93f37e84 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -7401,15 +7401,6 @@ static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type) goto err_vsi_rebuild; } - /* configure PTP timestamping after VSI rebuild */ - if (test_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags)) { - if (pf->ptp.tx_interrupt_mode == ICE_PTP_TX_INTERRUPT_SELF) - ice_ptp_cfg_timestamp(pf, false); - else if (pf->ptp.tx_interrupt_mode == ICE_PTP_TX_INTERRUPT_ALL) - /* for E82x PHC owner always need to have interrupts */ - ice_ptp_cfg_timestamp(pf, true); - } - err = ice_vsi_rebuild_by_type(pf, ICE_VSI_SWITCHDEV_CTRL); if (err) { dev_err(dev, "Switchdev CTRL VSI rebuild failed: %d\n", err); @@ -7461,6 +7452,9 @@ static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type) ice_plug_aux_dev(pf); if (ice_is_feature_supported(pf, ICE_F_SRIOV_LAG)) ice_lag_rebuild(pf); + + /* Restore timestamp mode settings after VSI rebuild */ + ice_ptp_restore_timestamp_mode(pf); return; err_vsi_rebuild: diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c index 624d05b4bbd9..71f405f8a6fe 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp.c @@ -294,18 +294,6 @@ static void ice_ptp_cfg_tx_interrupt(struct ice_pf *pf) wr32(hw, PFINT_OICR_ENA, val); } -/** - * ice_set_tx_tstamp - Enable or disable Tx timestamping - * @pf: The PF pointer to search in - * @on: bool value for whether timestamps are enabled or disabled - */ -static void ice_set_tx_tstamp(struct ice_pf *pf, bool on) -{ - pf->ptp.tstamp_config.tx_type = on ? HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF; - - ice_ptp_cfg_tx_interrupt(pf); -} - /** * ice_set_rx_tstamp - Enable or disable Rx timestamping * @pf: The PF pointer to search in @@ -317,7 +305,7 @@ static void ice_set_rx_tstamp(struct ice_pf *pf, bool on) u16 i; vsi = ice_get_main_vsi(pf); - if (!vsi) + if (!vsi || !vsi->rx_rings) return; /* Set the timestamp flag for all the Rx rings */ @@ -326,23 +314,50 @@ static void ice_set_rx_tstamp(struct ice_pf *pf, bool on) continue; vsi->rx_rings[i]->ptp_rx = on; } +} + +/** + * ice_ptp_disable_timestamp_mode - Disable current timestamp mode + * @pf: Board private structure + * + * Called during preparation for reset to temporarily disable timestamping on + * the device. Called during remove to disable timestamping while cleaning up + * driver resources. + */ +static void ice_ptp_disable_timestamp_mode(struct ice_pf *pf) +{ + struct ice_hw *hw = &pf->hw; + u32 val; + + val = rd32(hw, PFINT_OICR_ENA); + val &= ~PFINT_OICR_TSYN_TX_M; + wr32(hw, PFINT_OICR_ENA, val); - pf->ptp.tstamp_config.rx_filter = on ? HWTSTAMP_FILTER_ALL : - HWTSTAMP_FILTER_NONE; + ice_set_rx_tstamp(pf, false); } /** - * ice_ptp_cfg_timestamp - Configure timestamp for init/deinit + * ice_ptp_restore_timestamp_mode - Restore timestamp configuration * @pf: Board private structure - * @ena: bool value to enable or disable time stamp * - * This function will configure timestamping during PTP initialization - * and deinitialization + * Called at the end of rebuild to restore timestamp configuration after + * a device reset. */ -void ice_ptp_cfg_timestamp(struct ice_pf *pf, bool ena) +void ice_ptp_restore_timestamp_mode(struct ice_pf *pf) { - ice_set_tx_tstamp(pf, ena); - ice_set_rx_tstamp(pf, ena); + struct ice_hw *hw = &pf->hw; + bool enable_rx; + + ice_ptp_cfg_tx_interrupt(pf); + + enable_rx = pf->ptp.tstamp_config.rx_filter == HWTSTAMP_FILTER_ALL; + ice_set_rx_tstamp(pf, enable_rx); + + /* Trigger an immediate software interrupt to ensure that timestamps + * which occurred during reset are handled now. + */ + wr32(hw, PFINT_OICR, PFINT_OICR_TSYN_TX_M); + ice_flush(hw); } /** @@ -2043,10 +2058,10 @@ ice_ptp_set_timestamp_mode(struct ice_pf *pf, struct hwtstamp_config *config) { switch (config->tx_type) { case HWTSTAMP_TX_OFF: - ice_set_tx_tstamp(pf, false); + pf->ptp.tstamp_config.tx_type = HWTSTAMP_TX_OFF; break; case HWTSTAMP_TX_ON: - ice_set_tx_tstamp(pf, true); + pf->ptp.tstamp_config.tx_type = HWTSTAMP_TX_ON; break; default: return -ERANGE; @@ -2054,7 +2069,7 @@ ice_ptp_set_timestamp_mode(struct ice_pf *pf, struct hwtstamp_config *config) switch (config->rx_filter) { case HWTSTAMP_FILTER_NONE: - ice_set_rx_tstamp(pf, false); + pf->ptp.tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE; break; case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: @@ -2070,12 +2085,15 @@ ice_ptp_set_timestamp_mode(struct ice_pf *pf, struct hwtstamp_config *config) case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: case HWTSTAMP_FILTER_NTP_ALL: case HWTSTAMP_FILTER_ALL: - ice_set_rx_tstamp(pf, true); + pf->ptp.tstamp_config.rx_filter = HWTSTAMP_FILTER_ALL; break; default: return -ERANGE; } + /* Immediately update the device timestamping mode */ + ice_ptp_restore_timestamp_mode(pf); + return 0; } @@ -2743,7 +2761,7 @@ void ice_ptp_prepare_for_reset(struct ice_pf *pf) clear_bit(ICE_FLAG_PTP, pf->flags); /* Disable timestamping for both Tx and Rx */ - ice_ptp_cfg_timestamp(pf, false); + ice_ptp_disable_timestamp_mode(pf); kthread_cancel_delayed_work_sync(&ptp->work); @@ -3061,7 +3079,7 @@ void ice_ptp_release(struct ice_pf *pf) return; /* Disable timestamping for both Tx and Rx */ - ice_ptp_cfg_timestamp(pf, false); + ice_ptp_disable_timestamp_mode(pf); ice_ptp_remove_auxbus_device(pf); diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.h b/drivers/net/ethernet/intel/ice/ice_ptp.h index 8f6f94392756..06a330867fc9 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.h +++ b/drivers/net/ethernet/intel/ice/ice_ptp.h @@ -292,7 +292,7 @@ int ice_ptp_clock_index(struct ice_pf *pf); struct ice_pf; int ice_ptp_set_ts_config(struct ice_pf *pf, struct ifreq *ifr); int ice_ptp_get_ts_config(struct ice_pf *pf, struct ifreq *ifr); -void ice_ptp_cfg_timestamp(struct ice_pf *pf, bool ena); +void ice_ptp_restore_timestamp_mode(struct ice_pf *pf); void ice_ptp_extts_event(struct ice_pf *pf); s8 ice_ptp_request_ts(struct ice_ptp_tx *tx, struct sk_buff *skb); @@ -317,8 +317,7 @@ static inline int ice_ptp_get_ts_config(struct ice_pf *pf, struct ifreq *ifr) return -EOPNOTSUPP; } -static inline void ice_ptp_cfg_timestamp(struct ice_pf *pf, bool ena) { } - +static inline void ice_ptp_restore_timestamp_mode(struct ice_pf *pf) { } static inline void ice_ptp_extts_event(struct ice_pf *pf) { } static inline s8 ice_ptp_request_ts(struct ice_ptp_tx *tx, struct sk_buff *skb) -- cgit v1.2.3 From 4e20655e503e3a478cd1682bf25e3202dd823da8 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Tue, 21 Nov 2023 13:13:36 -0800 Subject: i40e: Fix adding unsupported cloud filters If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman Signed-off-by: Ivan Vecera Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 08d7edccfb8d..3f99eb198245 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -3844,7 +3844,7 @@ static int i40e_vc_add_cloud_filter(struct i40e_vf *vf, u8 *msg) struct i40e_pf *pf = vf->pf; struct i40e_vsi *vsi = NULL; int aq_ret = 0; - int i, ret; + int i; if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) { aq_ret = -EINVAL; @@ -3868,8 +3868,10 @@ static int i40e_vc_add_cloud_filter(struct i40e_vf *vf, u8 *msg) } cfilter = kzalloc(sizeof(*cfilter), GFP_KERNEL); - if (!cfilter) - return -ENOMEM; + if (!cfilter) { + aq_ret = -ENOMEM; + goto err_out; + } /* parse destination mac address */ for (i = 0; i < ETH_ALEN; i++) @@ -3917,13 +3919,13 @@ static int i40e_vc_add_cloud_filter(struct i40e_vf *vf, u8 *msg) /* Adding cloud filter programmed as TC filter */ if (tcf.dst_port) - ret = i40e_add_del_cloud_filter_big_buf(vsi, cfilter, true); + aq_ret = i40e_add_del_cloud_filter_big_buf(vsi, cfilter, true); else - ret = i40e_add_del_cloud_filter(vsi, cfilter, true); - if (ret) { + aq_ret = i40e_add_del_cloud_filter(vsi, cfilter, true); + if (aq_ret) { dev_err(&pf->pdev->dev, "VF %d: Failed to add cloud filter, err %pe aq_err %s\n", - vf->vf_id, ERR_PTR(ret), + vf->vf_id, ERR_PTR(aq_ret), i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status)); goto err_free; } -- cgit v1.2.3 From fd0413bbf8b11f56e8aa842783b0deda0dfe2926 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Tue, 21 Nov 2023 16:42:17 -0800 Subject: net: axienet: Fix check for partial TX checksum Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Samuel Holland Reviewed-by: Andrew Lunn Reviewed-by: Radhey Shyam Pandey Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 82d0d44b2b02..bf6e33990490 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -822,7 +822,7 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) if (lp->features & XAE_FEATURE_FULL_TX_CSUM) { /* Tx Full Checksum Offload Enabled */ cur_p->app0 |= 2; - } else if (lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) { + } else if (lp->features & XAE_FEATURE_PARTIAL_TX_CSUM) { csum_start_off = skb_transport_offset(skb); csum_index_off = csum_start_off + skb->csum_offset; /* Tx Partial Checksum Offload Enabled */ -- cgit v1.2.3 From 37f0205538baf70beb57cdcb6c7d14aa13257926 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 22 Nov 2023 17:17:08 -0600 Subject: net: ipa: fix one GSI register field width The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register is 24 bits (not 20 bits) starting with IPA v5.0. Fix this. Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions") Signed-off-by: Alex Elder Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.org Signed-off-by: Jakub Kicinski --- drivers/net/ipa/reg/gsi_reg-v5.0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ipa/reg/gsi_reg-v5.0.c b/drivers/net/ipa/reg/gsi_reg-v5.0.c index d7b81a36d673..145eb0bd096d 100644 --- a/drivers/net/ipa/reg/gsi_reg-v5.0.c +++ b/drivers/net/ipa/reg/gsi_reg-v5.0.c @@ -78,7 +78,7 @@ REG_STRIDE_FIELDS(EV_CH_E_CNTXT_0, ev_ch_e_cntxt_0, 0x0001c000 + 0x12000 * GSI_EE_AP, 0x80); static const u32 reg_ev_ch_e_cntxt_1_fmask[] = { - [R_LENGTH] = GENMASK(19, 0), + [R_LENGTH] = GENMASK(23, 0), }; REG_STRIDE_FIELDS(EV_CH_E_CNTXT_1, ev_ch_e_cntxt_1, -- cgit v1.2.3 From c0c6bde586c7dce82719b4ff32a2db6af9ee3d65 Mon Sep 17 00:00:00 2001 From: Stanislav Fomichev Date: Mon, 13 Nov 2023 20:54:52 -0800 Subject: netdevsim: Don't accept device bound programs Commit 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") introduced device-bound programs by largely reusing existing offloading infrastructure. This changed the semantics of 'prog->aux->offload' a bit. Now, it's non-NULL for both offloaded and device-bound programs. Instead of looking at 'prog->aux->offload' let's call bpf_prog_is_offloaded which should be true iff the program is offloaded and not merely device-bound. Fixes: 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") Reported-by: syzbot+44c2416196b7c607f226@syzkaller.appspotmail.com Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann Reviewed-by: Jakub Kicinski Cc: Dipendra Khadka Link: https://lore.kernel.org/bpf/20231114045453.1816995-2-sdf@google.com Signed-off-by: Alexei Starovoitov --- drivers/net/netdevsim/bpf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netdevsim/bpf.c b/drivers/net/netdevsim/bpf.c index f60eb97e3a62..608953d4f98d 100644 --- a/drivers/net/netdevsim/bpf.c +++ b/drivers/net/netdevsim/bpf.c @@ -93,7 +93,7 @@ static void nsim_prog_set_loaded(struct bpf_prog *prog, bool loaded) { struct nsim_bpf_bound_prog *state; - if (!prog || !prog->aux->offload) + if (!prog || !bpf_prog_is_offloaded(prog->aux)) return; state = prog->aux->offload->dev_priv; @@ -311,7 +311,7 @@ nsim_setup_prog_hw_checks(struct netdevsim *ns, struct netdev_bpf *bpf) if (!bpf->prog) return 0; - if (!bpf->prog->aux->offload) { + if (!bpf_prog_is_offloaded(bpf->prog->aux)) { NSIM_EA(bpf->extack, "xdpoffload of non-bound program"); return -EINVAL; } -- cgit v1.2.3 From 109b25d13e0054337860d44841b990d11b32d262 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 22 Nov 2023 14:11:41 +0900 Subject: net: rswitch: Fix type of ret in rswitch_start_xmit() The type of ret in rswitch_start_xmit() should be netdev_tx_t. So, fix it. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Wojciech Drewek Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/rswitch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c index 43a7795d6591..d53d90020904 100644 --- a/drivers/net/ethernet/renesas/rswitch.c +++ b/drivers/net/ethernet/renesas/rswitch.c @@ -1504,8 +1504,8 @@ static netdev_tx_t rswitch_start_xmit(struct sk_buff *skb, struct net_device *nd { struct rswitch_device *rdev = netdev_priv(ndev); struct rswitch_gwca_queue *gq = rdev->tx_queue; + netdev_tx_t ret = NETDEV_TX_OK; struct rswitch_ext_desc *desc; - int ret = NETDEV_TX_OK; dma_addr_t dma_addr; if (rswitch_get_num_cur_queues(gq) >= gq->ring_size - 1) { -- cgit v1.2.3 From 1aaef8634a20b322c82e84f12a9b6aec1e2fd4fa Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 22 Nov 2023 14:11:42 +0900 Subject: net: rswitch: Fix return value in rswitch_start_xmit() This .ndo_start_xmit() function should return netdev_tx_t value, not -ENOMEM. So, fix it. Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Wojciech Drewek Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/rswitch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c index d53d90020904..45bf9808c143 100644 --- a/drivers/net/ethernet/renesas/rswitch.c +++ b/drivers/net/ethernet/renesas/rswitch.c @@ -1535,7 +1535,7 @@ static netdev_tx_t rswitch_start_xmit(struct sk_buff *skb, struct net_device *nd ts_info = kzalloc(sizeof(*ts_info), GFP_ATOMIC); if (!ts_info) { dma_unmap_single(ndev->dev.parent, dma_addr, skb->len, DMA_TO_DEVICE); - return -ENOMEM; + return ret; } skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; -- cgit v1.2.3 From 782486af9b5b76493012711413c141509ac45dec Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 22 Nov 2023 14:11:43 +0900 Subject: net: rswitch: Fix missing dev_kfree_skb_any() in error path Before returning the rswitch_start_xmit() in the error path, dev_kfree_skb_any() should be called. So, fix it. Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Wojciech Drewek Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/rswitch.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c index 45bf9808c143..e77c6ff93d81 100644 --- a/drivers/net/ethernet/renesas/rswitch.c +++ b/drivers/net/ethernet/renesas/rswitch.c @@ -1517,10 +1517,8 @@ static netdev_tx_t rswitch_start_xmit(struct sk_buff *skb, struct net_device *nd return ret; dma_addr = dma_map_single(ndev->dev.parent, skb->data, skb->len, DMA_TO_DEVICE); - if (dma_mapping_error(ndev->dev.parent, dma_addr)) { - dev_kfree_skb_any(skb); - return ret; - } + if (dma_mapping_error(ndev->dev.parent, dma_addr)) + goto err_kfree; gq->skbs[gq->cur] = skb; desc = &gq->tx_ring[gq->cur]; @@ -1533,10 +1531,8 @@ static netdev_tx_t rswitch_start_xmit(struct sk_buff *skb, struct net_device *nd struct rswitch_gwca_ts_info *ts_info; ts_info = kzalloc(sizeof(*ts_info), GFP_ATOMIC); - if (!ts_info) { - dma_unmap_single(ndev->dev.parent, dma_addr, skb->len, DMA_TO_DEVICE); - return ret; - } + if (!ts_info) + goto err_unmap; skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; rdev->ts_tag++; @@ -1558,6 +1554,14 @@ static netdev_tx_t rswitch_start_xmit(struct sk_buff *skb, struct net_device *nd gq->cur = rswitch_next_queue_index(gq, true, 1); rswitch_modify(rdev->addr, GWTRC(gq->index), 0, BIT(gq->index % 32)); + return ret; + +err_unmap: + dma_unmap_single(ndev->dev.parent, dma_addr, skb->len, DMA_TO_DEVICE); + +err_kfree: + dev_kfree_skb_any(skb); + return ret; } -- cgit v1.2.3 From 71b5e40651d89a8685bea1592dfcd2aa61559628 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 27 Sep 2023 15:40:41 +0300 Subject: wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta() This error path should return -EINVAL instead of success. Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Dan Carpenter Acked-by: Gregory Greenman Link: https://lore.kernel.org/r/75e4ea09-db58-462f-bd4e-5ad4e5e5dcb5@moroto.mountain Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c index ca5e4fbcf8ce..6af606e5da65 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c @@ -707,8 +707,10 @@ int iwl_mvm_mld_add_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, rcu_dereference_protected(mvm_sta->link[link_id], lockdep_is_held(&mvm->mutex)); - if (WARN_ON(!link_conf || !mvm_link_sta)) + if (WARN_ON(!link_conf || !mvm_link_sta)) { + ret = -EINVAL; goto err; + } ret = iwl_mvm_mld_cfg_sta(mvm, sta, vif, link_sta, link_conf, mvm_link_sta); -- cgit v1.2.3 From b3f1a164c7f742503dc7159011f7ad6b092b660e Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 24 Nov 2023 14:15:28 +1000 Subject: net: dsa: mv88e6xxx: fix marvell 6350 switch probing As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Marvell 88e6350 switches fail to be probed: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces error creating PHYLINK: -22 mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22 ... The problem stems from the use of mv88e6185_phylink_get_caps() to get the device capabilities. Create a new dedicated phylink_get_caps for the 6351 family (which the 6350 is one of) to properly support their set of capabilities. According to chip.h the 6351 switch family includes the 6171, 6175, 6350 and 6351 switches, so update each of these to use the correct phylink_get_caps. Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Greg Ungerer Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 42b1acaca33a..d8a67bf4e595 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -577,6 +577,18 @@ static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100; } +static void mv88e6351_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, + struct phylink_config *config) +{ + unsigned long *supported = config->supported_interfaces; + + /* Translate the default cmode */ + mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported); + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | + MAC_1000FD; +} + static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip) { u16 reg, val; @@ -4340,7 +4352,7 @@ static const struct mv88e6xxx_ops mv88e6171_ops = { .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .stu_getnext = mv88e6352_g1_stu_getnext, .stu_loadpurge = mv88e6352_g1_stu_loadpurge, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6172_ops = { @@ -4440,7 +4452,7 @@ static const struct mv88e6xxx_ops mv88e6175_ops = { .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .stu_getnext = mv88e6352_g1_stu_getnext, .stu_loadpurge = mv88e6352_g1_stu_loadpurge, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6176_ops = { @@ -5069,7 +5081,7 @@ static const struct mv88e6xxx_ops mv88e6350_ops = { .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .stu_getnext = mv88e6352_g1_stu_getnext, .stu_loadpurge = mv88e6352_g1_stu_loadpurge, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6351_ops = { @@ -5117,7 +5129,7 @@ static const struct mv88e6xxx_ops mv88e6351_ops = { .stu_loadpurge = mv88e6352_g1_stu_loadpurge, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6352_ops = { -- cgit v1.2.3 From a524eabcd72d28425d9db242cf375d0389d74eba Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 24 Nov 2023 14:15:29 +1000 Subject: net: dsa: mv88e6xxx: fix marvell 6350 probe crash As of commit b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [] lr : [] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by: Greg Ungerer Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index d8a67bf4e595..07a22c74fe81 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3892,7 +3892,8 @@ static int mv88e6xxx_port_setup(struct dsa_switch *ds, int port) struct mv88e6xxx_chip *chip = ds->priv; int err; - if (chip->info->ops->pcs_ops->pcs_init) { + if (chip->info->ops->pcs_ops && + chip->info->ops->pcs_ops->pcs_init) { err = chip->info->ops->pcs_ops->pcs_init(chip, port); if (err) return err; @@ -3907,7 +3908,8 @@ static void mv88e6xxx_port_teardown(struct dsa_switch *ds, int port) mv88e6xxx_teardown_devlink_regions_port(ds, port); - if (chip->info->ops->pcs_ops->pcs_teardown) + if (chip->info->ops->pcs_ops && + chip->info->ops->pcs_ops->pcs_teardown) chip->info->ops->pcs_ops->pcs_teardown(chip, port); } -- cgit v1.2.3 From f422abe3f23d483cf01f386819f26fb3fe0dbb2b Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Fri, 24 Nov 2023 12:28:04 +0200 Subject: dpaa2-eth: increase the needed headroom to account for alignment Increase the needed headroom to account for a 64 byte alignment restriction which, with this patch, we make mandatory on the Tx path. The case in which the amount of headroom needed is not available is already handled by the driver which instead sends a S/G frame with the first buffer only holding the SW and HW annotation areas. Without this patch, we can empirically see data corruption happening between Tx and Tx confirmation which sometimes leads to the SW annotation area being overwritten. Since this is an old IP where the hardware team cannot help to understand the underlying behavior, we make the Tx alignment mandatory for all frames to avoid the crash on Tx conf. Also, remove the comment that suggested that this is just an optimization. This patch also sets the needed_headroom net device field to the usual value that the driver would need on the Tx path: - 64 bytes for the software annotation area - 64 bytes to account for a 64 byte aligned buffer address Fixes: 6e2387e8f19e ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver") Closes: https://lore.kernel.org/netdev/aa784d0c-85eb-4e5d-968b-c8f74fa86be6@gin.de/ Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 8 ++++---- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 15bab41cee48..774377db0b4b 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -1073,14 +1073,12 @@ static int dpaa2_eth_build_single_fd(struct dpaa2_eth_priv *priv, dma_addr_t addr; buffer_start = skb->data - dpaa2_eth_needed_headroom(skb); - - /* If there's enough room to align the FD address, do it. - * It will help hardware optimize accesses. - */ aligned_start = PTR_ALIGN(buffer_start - DPAA2_ETH_TX_BUF_ALIGN, DPAA2_ETH_TX_BUF_ALIGN); if (aligned_start >= skb->head) buffer_start = aligned_start; + else + return -ENOMEM; /* Store a backpointer to the skb at the beginning of the buffer * (in the private data area) such that we can release it @@ -4967,6 +4965,8 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) if (err) goto err_dl_port_add; + net_dev->needed_headroom = DPAA2_ETH_SWA_SIZE + DPAA2_ETH_TX_BUF_ALIGN; + err = register_netdev(net_dev); if (err < 0) { dev_err(dev, "register_netdev() failed\n"); diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h index bfb6c96c3b2f..834cba8c3a41 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h @@ -740,7 +740,7 @@ static inline bool dpaa2_eth_rx_pause_enabled(u64 link_options) static inline unsigned int dpaa2_eth_needed_headroom(struct sk_buff *skb) { - unsigned int headroom = DPAA2_ETH_SWA_SIZE; + unsigned int headroom = DPAA2_ETH_SWA_SIZE + DPAA2_ETH_TX_BUF_ALIGN; /* If we don't have an skb (e.g. XDP buffer), we only need space for * the software annotation area -- cgit v1.2.3 From beb1930f966d1517921488bd5d64147f58f79abf Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Fri, 24 Nov 2023 12:28:05 +0200 Subject: dpaa2-eth: recycle the RX buffer only after all processing done The blamed commit added support for Rx copybreak. This meant that for certain frame sizes, a new skb was allocated and the initial data buffer was recycled. Instead of waiting to recycle the Rx buffer only after all processing was done on it (like accessing the parse results or timestamp information), the code path just went ahead and re-used the buffer right away. This sometimes lead to corrupted HW and SW annotation areas. Fix this by delaying the moment when the buffer is recycled. Fixes: 50f826999a80 ("dpaa2-eth: add rx copybreak support") Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 774377db0b4b..888509cf1f21 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -516,8 +516,6 @@ struct sk_buff *dpaa2_eth_alloc_skb(struct dpaa2_eth_priv *priv, memcpy(skb->data, fd_vaddr + fd_offset, fd_length); - dpaa2_eth_recycle_buf(priv, ch, dpaa2_fd_get_addr(fd)); - return skb; } @@ -589,6 +587,7 @@ void dpaa2_eth_rx(struct dpaa2_eth_priv *priv, struct rtnl_link_stats64 *percpu_stats; struct dpaa2_eth_drv_stats *percpu_extras; struct device *dev = priv->net_dev->dev.parent; + bool recycle_rx_buf = false; void *buf_data; u32 xdp_act; @@ -618,6 +617,8 @@ void dpaa2_eth_rx(struct dpaa2_eth_priv *priv, dma_unmap_page(dev, addr, priv->rx_buf_size, DMA_BIDIRECTIONAL); skb = dpaa2_eth_build_linear_skb(ch, fd, vaddr); + } else { + recycle_rx_buf = true; } } else if (fd_format == dpaa2_fd_sg) { WARN_ON(priv->xdp_prog); @@ -637,6 +638,9 @@ void dpaa2_eth_rx(struct dpaa2_eth_priv *priv, goto err_build_skb; dpaa2_eth_receive_skb(priv, ch, fd, vaddr, fq, percpu_stats, skb); + + if (recycle_rx_buf) + dpaa2_eth_recycle_buf(priv, ch, dpaa2_fd_get_addr(fd)); return; err_build_skb: -- cgit v1.2.3 From 3d529cd11f2b6c1c3b8e084269152eb30fbb96f5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Nov 2023 17:25:28 +0100 Subject: wifi: mac80211: use wiphy locked debugfs helpers for agg_status The read is currently with RCU and the write can deadlock, convert both for the sake of illustration. Make mac80211 depend on cfg80211 debugfs to get the helpers, but mac80211 debugfs without it does nothing anyway. This also required some adjustments in ath9k. Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/ath9k/Kconfig | 4 +- net/mac80211/Kconfig | 2 +- net/mac80211/debugfs_sta.c | 74 +++++++++++++++++++--------------- 3 files changed, 44 insertions(+), 36 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index e150d82eddb6..0c47be06c153 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -57,8 +57,7 @@ config ATH9K_AHB config ATH9K_DEBUGFS bool "Atheros ath9k debugging" - depends on ATH9K && DEBUG_FS - select MAC80211_DEBUGFS + depends on ATH9K && DEBUG_FS && MAC80211_DEBUGFS select ATH9K_COMMON_DEBUG help Say Y, if you need access to ath9k's statistics for @@ -70,7 +69,6 @@ config ATH9K_DEBUGFS config ATH9K_STATION_STATISTICS bool "Detailed station statistics" depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS - select MAC80211_DEBUGFS default n help This option enables detailed statistics for association stations. diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 037ab74f5ade..cb0291decf2e 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -88,7 +88,7 @@ config MAC80211_LEDS config MAC80211_DEBUGFS bool "Export mac80211 internals in DebugFS" - depends on MAC80211 && DEBUG_FS + depends on MAC80211 && CFG80211_DEBUGFS help Select this to see extensive information about the internal state of mac80211 in debugfs. diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 06e3613bf46b..5bf507ebb096 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -312,23 +312,14 @@ static ssize_t sta_aql_write(struct file *file, const char __user *userbuf, STA_OPS_RW(aql); -static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) +static ssize_t sta_agg_status_do_read(struct wiphy *wiphy, struct file *file, + char *buf, size_t bufsz, void *data) { - char *buf, *p; - ssize_t bufsz = 71 + IEEE80211_NUM_TIDS * 40; + struct sta_info *sta = data; + char *p = buf; int i; - struct sta_info *sta = file->private_data; struct tid_ampdu_rx *tid_rx; struct tid_ampdu_tx *tid_tx; - ssize_t ret; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) - return -ENOMEM; - p = buf; - - rcu_read_lock(); p += scnprintf(p, bufsz + buf - p, "next dialog_token: %#02x\n", sta->ampdu_mlme.dialog_token_allocator + 1); @@ -338,8 +329,8 @@ static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, for (i = 0; i < IEEE80211_NUM_TIDS; i++) { bool tid_rx_valid; - tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[i]); - tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[i]); + tid_rx = wiphy_dereference(wiphy, sta->ampdu_mlme.tid_rx[i]); + tid_tx = wiphy_dereference(wiphy, sta->ampdu_mlme.tid_tx[i]); tid_rx_valid = test_bit(i, sta->ampdu_mlme.agg_session_valid); p += scnprintf(p, bufsz + buf - p, "%02d", i); @@ -358,31 +349,39 @@ static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, tid_tx ? skb_queue_len(&tid_tx->pending) : 0); p += scnprintf(p, bufsz + buf - p, "\n"); } - rcu_read_unlock(); - ret = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); + return p - buf; +} + +static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct sta_info *sta = file->private_data; + struct wiphy *wiphy = sta->local->hw.wiphy; + size_t bufsz = 71 + IEEE80211_NUM_TIDS * 40; + char *buf = kmalloc(bufsz, GFP_KERNEL); + ssize_t ret; + + if (!buf) + return -ENOMEM; + + ret = wiphy_locked_debugfs_read(wiphy, file, buf, bufsz, + userbuf, count, ppos, + sta_agg_status_do_read, sta); kfree(buf); + return ret; } -static ssize_t sta_agg_status_write(struct file *file, const char __user *userbuf, - size_t count, loff_t *ppos) +static ssize_t sta_agg_status_do_write(struct wiphy *wiphy, struct file *file, + char *buf, size_t count, void *data) { - char _buf[25] = {}, *buf = _buf; - struct sta_info *sta = file->private_data; + struct sta_info *sta = data; bool start, tx; unsigned long tid; - char *pos; + char *pos = buf; int ret, timeout = 5000; - if (count > sizeof(_buf)) - return -EINVAL; - - if (copy_from_user(buf, userbuf, count)) - return -EFAULT; - - buf[sizeof(_buf) - 1] = '\0'; - pos = buf; buf = strsep(&pos, " "); if (!buf) return -EINVAL; @@ -420,7 +419,6 @@ static ssize_t sta_agg_status_write(struct file *file, const char __user *userbu if (ret || tid >= IEEE80211_NUM_TIDS) return -EINVAL; - wiphy_lock(sta->local->hw.wiphy); if (tx) { if (start) ret = ieee80211_start_tx_ba_session(&sta->sta, tid, @@ -432,10 +430,22 @@ static ssize_t sta_agg_status_write(struct file *file, const char __user *userbu 3, true); ret = 0; } - wiphy_unlock(sta->local->hw.wiphy); return ret ?: count; } + +static ssize_t sta_agg_status_write(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct sta_info *sta = file->private_data; + struct wiphy *wiphy = sta->local->hw.wiphy; + char _buf[26]; + + return wiphy_locked_debugfs_write(wiphy, file, _buf, sizeof(_buf), + userbuf, count, + sta_agg_status_do_write, sta); +} STA_OPS_RW(agg_status); /* link sta attributes */ -- cgit v1.2.3 From 0bad281d0ecdf8391b0f42678b663336e7c3ceb0 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 27 Nov 2023 21:05:33 +0100 Subject: netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link The IFLA_NETKIT_PEER_INFO attribute can only be used during device creation, but not via changelink callback. Hence reject it there. Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device") Signed-off-by: Daniel Borkmann Acked-by: Nikolay Aleksandrov Cc: Jakub Kicinski Reviewed-by: Jakub Kicinski Link: https://lore.kernel.org/r/e86a277a1e8d3b19890312779e42f790b0605ea4.1701115314.git.daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/netkit.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/netkit.c b/drivers/net/netkit.c index 97bd6705c241..39171380ccf2 100644 --- a/drivers/net/netkit.c +++ b/drivers/net/netkit.c @@ -851,6 +851,12 @@ static int netkit_change_link(struct net_device *dev, struct nlattr *tb[], return -EACCES; } + if (data[IFLA_NETKIT_PEER_INFO]) { + NL_SET_ERR_MSG_ATTR(extack, data[IFLA_NETKIT_PEER_INFO], + "netkit peer info cannot be changed after device creation"); + return -EINVAL; + } + if (data[IFLA_NETKIT_POLICY]) { attr = data[IFLA_NETKIT_POLICY]; policy = nla_get_u32(attr); -- cgit v1.2.3 From ad31c629ca3c87f6d557488c1f9faaebfbcd203c Mon Sep 17 00:00:00 2001 From: Elena Salomatkina Date: Sat, 25 Nov 2023 00:08:02 +0300 Subject: octeontx2-af: Fix possible buffer overflow A loop in rvu_mbox_handler_nix_bandprof_free() contains a break if (idx == MAX_BANDPROF_PER_PFFUNC), but if idx may reach MAX_BANDPROF_PER_PFFUNC buffer '(*req->prof_idx)[layer]' overflow happens before that check. The patch moves the break to the beginning of the loop. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support"). Signed-off-by: Elena Salomatkina Reviewed-by: Simon Horman Reviewed-by: Subbaraya Sundeep Link: https://lore.kernel.org/r/20231124210802.109763-1-elena.salomatkina.cmc@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index 23c2f2ed2fb8..c112c71ff576 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -5505,6 +5505,8 @@ int rvu_mbox_handler_nix_bandprof_free(struct rvu *rvu, ipolicer = &nix_hw->ipolicer[layer]; for (idx = 0; idx < req->prof_count[layer]; idx++) { + if (idx == MAX_BANDPROF_PER_PFFUNC) + break; prof_idx = req->prof_idx[layer][idx]; if (prof_idx >= ipolicer->band_prof.max || ipolicer->pfvf_map[prof_idx] != pcifunc) @@ -5518,8 +5520,6 @@ int rvu_mbox_handler_nix_bandprof_free(struct rvu *rvu, ipolicer->pfvf_map[prof_idx] = 0x00; ipolicer->match_id[prof_idx] = 0; rvu_free_rsrc(&ipolicer->band_prof, prof_idx); - if (idx == MAX_BANDPROF_PER_PFFUNC) - break; } } mutex_unlock(&rvu->rsrc_lock); -- cgit v1.2.3 From e54d628a2721bfbb002c19f6e8ca6746cec7640f Mon Sep 17 00:00:00 2001 From: Furong Xu <0x1207@gmail.com> Date: Sat, 25 Nov 2023 14:01:26 +0800 Subject: net: stmmac: xgmac: Disable FPE MMC interrupts Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default") tries to disable MMC interrupts to avoid a storm of unhandled interrupts, but leaves the FPE(Frame Preemption) MMC interrupts enabled, FPE MMC interrupts can cause the same problem. Now we mask FPE TX and RX interrupts to disable all MMC interrupts. Fixes: aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default") Reviewed-by: Larysa Zaremba Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Serge Semin Reviewed-by: Wojciech Drewek Link: https://lore.kernel.org/r/20231125060126.2328690-1-0x1207@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c index ea4910ae0921..6a7c1d325c46 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c @@ -177,8 +177,10 @@ #define MMC_XGMAC_RX_DISCARD_OCT_GB 0x1b4 #define MMC_XGMAC_RX_ALIGN_ERR_PKT 0x1bc +#define MMC_XGMAC_TX_FPE_INTR_MASK 0x204 #define MMC_XGMAC_TX_FPE_FRAG 0x208 #define MMC_XGMAC_TX_HOLD_REQ 0x20c +#define MMC_XGMAC_RX_FPE_INTR_MASK 0x224 #define MMC_XGMAC_RX_PKT_ASSEMBLY_ERR 0x228 #define MMC_XGMAC_RX_PKT_SMD_ERR 0x22c #define MMC_XGMAC_RX_PKT_ASSEMBLY_OK 0x230 @@ -352,6 +354,8 @@ static void dwxgmac_mmc_intr_all_mask(void __iomem *mmcaddr) { writel(0x0, mmcaddr + MMC_RX_INTR_MASK); writel(0x0, mmcaddr + MMC_TX_INTR_MASK); + writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_TX_FPE_INTR_MASK); + writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_RX_FPE_INTR_MASK); writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_RX_IPC_INTR_MASK); } -- cgit v1.2.3 From 51597219e0cd5157401d4d0ccb5daa4d9961676f Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Sat, 25 Nov 2023 22:04:02 +0530 Subject: octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64 When more than 64 VFs are enabled for a PF then mbox communication between VF and PF is not working as mbox work queueing for few VFs are skipped due to wrong calculation of VF numbers. Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by: Geetha sowjanya Signed-off-by: Subbaraya Sundeep Link: https://lore.kernel.org/r/1700930042-5400-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index ba95ac913274..6d56fc191845 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -566,7 +566,9 @@ static irqreturn_t otx2_pfvf_mbox_intr_handler(int irq, void *pf_irq) otx2_write64(pf, RVU_PF_VFPF_MBOX_INTX(1), intr); otx2_queue_work(mbox, pf->mbox_pfvf_wq, 64, vfs, intr, TYPE_PFVF); - vfs -= 64; + if (intr) + trace_otx2_msg_interrupt(mbox->mbox.pdev, "VF(s) to PF", intr); + vfs = 64; } intr = otx2_read64(pf, RVU_PF_VFPF_MBOX_INTX(0)); @@ -574,7 +576,8 @@ static irqreturn_t otx2_pfvf_mbox_intr_handler(int irq, void *pf_irq) otx2_queue_work(mbox, pf->mbox_pfvf_wq, 0, vfs, intr, TYPE_PFVF); - trace_otx2_msg_interrupt(mbox->mbox.pdev, "VF(s) to PF", intr); + if (intr) + trace_otx2_msg_interrupt(mbox->mbox.pdev, "VF(s) to PF", intr); return IRQ_HANDLED; } -- cgit v1.2.3 From fd7f98b2e12a3d96a92bde6640657ec7116f4372 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Sat, 25 Nov 2023 22:06:57 +0530 Subject: octeontx2-pf: Restore TC ingress police rules when interface is up TC ingress policer rules depends on interface receive queue contexts since the bandwidth profiles are attached to RQ contexts. When an interface is brought down all the queue contexts are freed. This in turn frees bandwidth profiles in hardware causing ingress police rules non-functional after the interface is brought up. Fix this by applying all the ingress police rules config to hardware in otx2_open. Also allow adding ingress rules only when interface is running since no contexts exist for the interface when it is down. Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower") Signed-off-by: Subbaraya Sundeep Link: https://lore.kernel.org/r/1700930217-5707-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c | 3 + .../ethernet/marvell/octeontx2/nic/otx2_common.h | 2 + .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 2 + .../net/ethernet/marvell/octeontx2/nic/otx2_tc.c | 120 ++++++++++++++++----- 4 files changed, 102 insertions(+), 25 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c index a4a258da8dd5..c1c99d7054f8 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c @@ -450,6 +450,9 @@ int cn10k_set_ipolicer_rate(struct otx2_nic *pfvf, u16 profile, aq->prof.pebs_mantissa = 0; aq->prof_mask.pebs_mantissa = 0xFF; + aq->prof.hl_en = 0; + aq->prof_mask.hl_en = 1; + /* Fill AQ info */ aq->qidx = profile; aq->ctype = NIX_AQ_CTYPE_BANDPROF; diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h index e7c69b57147e..06910307085e 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h @@ -1070,6 +1070,8 @@ int otx2_init_tc(struct otx2_nic *nic); void otx2_shutdown_tc(struct otx2_nic *nic); int otx2_setup_tc(struct net_device *netdev, enum tc_setup_type type, void *type_data); +void otx2_tc_apply_ingress_police_rules(struct otx2_nic *nic); + /* CGX/RPM DMAC filters support */ int otx2_dmacflt_get_max_cnt(struct otx2_nic *pf); int otx2_dmacflt_add(struct otx2_nic *pf, const u8 *mac, u32 bit_pos); diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 6d56fc191845..532e324bdcc8 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1873,6 +1873,8 @@ int otx2_open(struct net_device *netdev) if (pf->flags & OTX2_FLAG_DMACFLTR_SUPPORT) otx2_dmacflt_reinstall_flows(pf); + otx2_tc_apply_ingress_police_rules(pf); + err = otx2_rxtx_enable(pf, true); /* If a mbox communication error happens at this point then interface * will end up in a state such that it is in down state but hardware diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c index 8a5e3987a482..db1e0e0e812d 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c @@ -47,6 +47,9 @@ struct otx2_tc_flow { bool is_act_police; u32 prio; struct npc_install_flow_req req; + u64 rate; + u32 burst; + bool is_pps; }; static void otx2_get_egress_burst_cfg(struct otx2_nic *nic, u32 burst, @@ -284,21 +287,10 @@ static int otx2_tc_egress_matchall_delete(struct otx2_nic *nic, return err; } -static int otx2_tc_act_set_police(struct otx2_nic *nic, - struct otx2_tc_flow *node, - struct flow_cls_offload *f, - u64 rate, u32 burst, u32 mark, - struct npc_install_flow_req *req, bool pps) +static int otx2_tc_act_set_hw_police(struct otx2_nic *nic, + struct otx2_tc_flow *node) { - struct netlink_ext_ack *extack = f->common.extack; - struct otx2_hw *hw = &nic->hw; - int rq_idx, rc; - - rq_idx = find_first_zero_bit(&nic->rq_bmap, hw->rx_queues); - if (rq_idx >= hw->rx_queues) { - NL_SET_ERR_MSG_MOD(extack, "Police action rules exceeded"); - return -EINVAL; - } + int rc; mutex_lock(&nic->mbox.lock); @@ -308,23 +300,17 @@ static int otx2_tc_act_set_police(struct otx2_nic *nic, return rc; } - rc = cn10k_set_ipolicer_rate(nic, node->leaf_profile, burst, rate, pps); + rc = cn10k_set_ipolicer_rate(nic, node->leaf_profile, + node->burst, node->rate, node->is_pps); if (rc) goto free_leaf; - rc = cn10k_map_unmap_rq_policer(nic, rq_idx, node->leaf_profile, true); + rc = cn10k_map_unmap_rq_policer(nic, node->rq, node->leaf_profile, true); if (rc) goto free_leaf; mutex_unlock(&nic->mbox.lock); - req->match_id = mark & 0xFFFFULL; - req->index = rq_idx; - req->op = NIX_RX_ACTIONOP_UCAST; - set_bit(rq_idx, &nic->rq_bmap); - node->is_act_police = true; - node->rq = rq_idx; - return 0; free_leaf: @@ -336,6 +322,39 @@ free_leaf: return rc; } +static int otx2_tc_act_set_police(struct otx2_nic *nic, + struct otx2_tc_flow *node, + struct flow_cls_offload *f, + u64 rate, u32 burst, u32 mark, + struct npc_install_flow_req *req, bool pps) +{ + struct netlink_ext_ack *extack = f->common.extack; + struct otx2_hw *hw = &nic->hw; + int rq_idx, rc; + + rq_idx = find_first_zero_bit(&nic->rq_bmap, hw->rx_queues); + if (rq_idx >= hw->rx_queues) { + NL_SET_ERR_MSG_MOD(extack, "Police action rules exceeded"); + return -EINVAL; + } + + req->match_id = mark & 0xFFFFULL; + req->index = rq_idx; + req->op = NIX_RX_ACTIONOP_UCAST; + + node->is_act_police = true; + node->rq = rq_idx; + node->burst = burst; + node->rate = rate; + node->is_pps = pps; + + rc = otx2_tc_act_set_hw_police(nic, node); + if (!rc) + set_bit(rq_idx, &nic->rq_bmap); + + return rc; +} + static int otx2_tc_parse_actions(struct otx2_nic *nic, struct flow_action *flow_action, struct npc_install_flow_req *req, @@ -1044,6 +1063,11 @@ static int otx2_tc_del_flow(struct otx2_nic *nic, } if (flow_node->is_act_police) { + __clear_bit(flow_node->rq, &nic->rq_bmap); + + if (nic->flags & OTX2_FLAG_INTF_DOWN) + goto free_mcam_flow; + mutex_lock(&nic->mbox.lock); err = cn10k_map_unmap_rq_policer(nic, flow_node->rq, @@ -1059,11 +1083,10 @@ static int otx2_tc_del_flow(struct otx2_nic *nic, "Unable to free leaf bandwidth profile(%d)\n", flow_node->leaf_profile); - __clear_bit(flow_node->rq, &nic->rq_bmap); - mutex_unlock(&nic->mbox.lock); } +free_mcam_flow: otx2_del_mcam_flow_entry(nic, flow_node->entry, NULL); otx2_tc_update_mcam_table(nic, flow_cfg, flow_node, false); kfree_rcu(flow_node, rcu); @@ -1083,6 +1106,11 @@ static int otx2_tc_add_flow(struct otx2_nic *nic, if (!(nic->flags & OTX2_FLAG_TC_FLOWER_SUPPORT)) return -ENOMEM; + if (nic->flags & OTX2_FLAG_INTF_DOWN) { + NL_SET_ERR_MSG_MOD(extack, "Interface not initialized"); + return -EINVAL; + } + if (flow_cfg->nr_flows == flow_cfg->max_flows) { NL_SET_ERR_MSG_MOD(extack, "Free MCAM entry not available to add the flow"); @@ -1442,3 +1470,45 @@ void otx2_shutdown_tc(struct otx2_nic *nic) otx2_destroy_tc_flow_list(nic); } EXPORT_SYMBOL(otx2_shutdown_tc); + +static void otx2_tc_config_ingress_rule(struct otx2_nic *nic, + struct otx2_tc_flow *node) +{ + struct npc_install_flow_req *req; + + if (otx2_tc_act_set_hw_police(nic, node)) + return; + + mutex_lock(&nic->mbox.lock); + + req = otx2_mbox_alloc_msg_npc_install_flow(&nic->mbox); + if (!req) + goto err; + + memcpy(req, &node->req, sizeof(struct npc_install_flow_req)); + + if (otx2_sync_mbox_msg(&nic->mbox)) + netdev_err(nic->netdev, + "Failed to install MCAM flow entry for ingress rule"); +err: + mutex_unlock(&nic->mbox.lock); +} + +void otx2_tc_apply_ingress_police_rules(struct otx2_nic *nic) +{ + struct otx2_flow_config *flow_cfg = nic->flow_cfg; + struct otx2_tc_flow *node; + + /* If any ingress policer rules exist for the interface then + * apply those rules. Ingress policer rules depend on bandwidth + * profiles linked to the receive queues. Since no receive queues + * exist when interface is down, ingress policer rules are stored + * and configured in hardware after all receive queues are allocated + * in otx2_open. + */ + list_for_each_entry(node, &flow_cfg->flow_list_tc, list) { + if (node->is_act_police) + otx2_tc_config_ingress_rule(nic, node); + } +} +EXPORT_SYMBOL(otx2_tc_apply_ingress_police_rules); -- cgit v1.2.3 From 59d395ed606d8df14615712b0cdcdadb2d962175 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 26 Nov 2023 19:36:46 +0100 Subject: r8169: fix deadlock on RTL8125 in jumbo mtu mode The original change results in a deadlock if jumbo mtu mode is used. Reason is that the phydev lock is held when rtl_reset_work() is called here, and rtl_jumbo_config() calls phy_start_aneg() which also tries to acquire the phydev lock. Fix this by calling rtl_reset_work() asynchronously. Fixes: 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125") Reported-by: Ian Chen Tested-by: Ian Chen Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/caf6a487-ef8c-4570-88f9-f47a659faf33@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/realtek/r8169_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 295366a85c63..a43e33e4b25e 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -579,6 +579,7 @@ struct rtl8169_tc_offsets { enum rtl_flag { RTL_FLAG_TASK_ENABLED = 0, RTL_FLAG_TASK_RESET_PENDING, + RTL_FLAG_TASK_RESET_NO_QUEUE_WAKE, RTL_FLAG_TASK_TX_TIMEOUT, RTL_FLAG_MAX }; @@ -4582,6 +4583,8 @@ static void rtl_task(struct work_struct *work) reset: rtl_reset_work(tp); netif_wake_queue(tp->dev); + } else if (test_and_clear_bit(RTL_FLAG_TASK_RESET_NO_QUEUE_WAKE, tp->wk.flags)) { + rtl_reset_work(tp); } out_unlock: rtnl_unlock(); @@ -4615,7 +4618,7 @@ static void r8169_phylink_handler(struct net_device *ndev) } else { /* In few cases rx is broken after link-down otherwise */ if (rtl_is_8125(tp)) - rtl_reset_work(tp); + rtl_schedule_task(tp, RTL_FLAG_TASK_RESET_NO_QUEUE_WAKE); pm_runtime_idle(d); } -- cgit v1.2.3 From 91d3d149978ba7b238198dd80e4b823756aa7cfa Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 26 Nov 2023 23:01:02 +0100 Subject: r8169: prevent potential deadlock in rtl8169_close ndo_stop() is RTNL-protected by net core, and the worker function takes RTNL as well. Therefore we will deadlock when trying to execute a pending work synchronously. To fix this execute any pending work asynchronously. This will do no harm because netif_running() is false in ndo_stop(), and therefore the work function is effectively a no-op. However we have to ensure that no task is running or pending after rtl_remove_one(), therefore add a call to cancel_work_sync(). Fixes: abe5fc42f9ce ("r8169: use RTNL to protect critical sections") Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/realtek/r8169_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index a43e33e4b25e..62cabeeb842a 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4694,7 +4694,7 @@ static int rtl8169_close(struct net_device *dev) rtl8169_down(tp); rtl8169_rx_clear(tp); - cancel_work_sync(&tp->wk.work); + cancel_work(&tp->wk.work); free_irq(tp->irq, tp); @@ -4928,6 +4928,8 @@ static void rtl_remove_one(struct pci_dev *pdev) if (pci_dev_run_wake(pdev)) pm_runtime_get_noresume(&pdev->dev); + cancel_work_sync(&tp->wk.work); + unregister_netdev(tp->dev); if (tp->dash_type != RTL_DASH_NONE) -- cgit v1.2.3 From 9870257a0a338cd8d6c1cddab74e703f490f6779 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 27 Nov 2023 21:24:20 +0900 Subject: ravb: Fix races between ravb_tx_timeout_work() and net related ops Fix races between ravb_tx_timeout_work() and functions of net_device_ops and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that since ravb_close() is under the rtnl lock and calls cancel_work_sync(), ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock may happen in ravb_tx_timeout_work() like below: CPU0 CPU1 ravb_tx_timeout() schedule_work() ... __dev_close_many() // Under rtnl lock ravb_close() cancel_work_sync() // Waiting ravb_tx_timeout_work() rtnl_lock() // This is possible to cause a deadlock If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Sergey Shtylyov Link: https://lore.kernel.org/r/20231127122420.3706751-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/renesas/ravb_main.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index c70cff80cc99..7c007ecd3ff6 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1874,6 +1874,12 @@ static void ravb_tx_timeout_work(struct work_struct *work) struct net_device *ndev = priv->ndev; int error; + if (!rtnl_trylock()) { + usleep_range(1000, 2000); + schedule_work(&priv->work); + return; + } + netif_tx_stop_all_queues(ndev); /* Stop PTP Clock driver */ @@ -1907,7 +1913,7 @@ static void ravb_tx_timeout_work(struct work_struct *work) */ netdev_err(ndev, "%s: ravb_dmac_init() failed, error %d\n", __func__, error); - return; + goto out_unlock; } ravb_emac_init(ndev); @@ -1917,6 +1923,9 @@ out: ravb_ptp_init(ndev, priv->pdev); netif_tx_start_all_queues(ndev); + +out_unlock: + rtnl_unlock(); } /* Packet transmit function for Ethernet AVB */ -- cgit v1.2.3 From 9f74a3dfcf83e11aedcb98250b8040dbc6d9659a Mon Sep 17 00:00:00 2001 From: Dave Ertman Date: Mon, 27 Nov 2023 13:23:38 -0800 Subject: ice: Fix VF Reset paths when interface in a failed over aggregate There is an error when an interface has the following conditions: - PF is in an aggregate (bond) - PF has VFs created on it - bond is in a state where it is failed-over to the secondary interface - A VF reset is issued on one or more of those VFs The issue is generated by the originating PF trying to rebuild or reconfigure the VF resources. Since the bond is failed over to the secondary interface the queue contexts are in a modified state. To fix this issue, have the originating interface reclaim its resources prior to the tear-down and rebuild or reconfigure. Then after the process is complete, move the resources back to the currently active interface. There are multiple paths that can be used depending on what triggered the event, so create a helper function to move the queues and use paired calls to the helper (back to origin, process, then move back to active interface) under the same lag_mutex lock. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Signed-off-by: Dave Ertman Tested-by: Sujai Buvaneswaran Signed-off-by: Tony Nguyen Reviewed-by: Przemek Kitszel Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice_lag.c | 122 +++++++++++++++----------- drivers/net/ethernet/intel/ice/ice_lag.h | 1 + drivers/net/ethernet/intel/ice/ice_vf_lib.c | 20 +++++ drivers/net/ethernet/intel/ice/ice_virtchnl.c | 25 ++++++ 4 files changed, 118 insertions(+), 50 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ice/ice_lag.c b/drivers/net/ethernet/intel/ice/ice_lag.c index cd065ec48c87..280994ee5933 100644 --- a/drivers/net/ethernet/intel/ice/ice_lag.c +++ b/drivers/net/ethernet/intel/ice/ice_lag.c @@ -569,6 +569,50 @@ resume_traffic: dev_dbg(dev, "Problem restarting traffic for LAG node move\n"); } +/** + * ice_lag_build_netdev_list - populate the lag struct's netdev list + * @lag: local lag struct + * @ndlist: pointer to netdev list to populate + */ +static void ice_lag_build_netdev_list(struct ice_lag *lag, + struct ice_lag_netdev_list *ndlist) +{ + struct ice_lag_netdev_list *nl; + struct net_device *tmp_nd; + + INIT_LIST_HEAD(&ndlist->node); + rcu_read_lock(); + for_each_netdev_in_bond_rcu(lag->upper_netdev, tmp_nd) { + nl = kzalloc(sizeof(*nl), GFP_ATOMIC); + if (!nl) + break; + + nl->netdev = tmp_nd; + list_add(&nl->node, &ndlist->node); + } + rcu_read_unlock(); + lag->netdev_head = &ndlist->node; +} + +/** + * ice_lag_destroy_netdev_list - free lag struct's netdev list + * @lag: pointer to local lag struct + * @ndlist: pointer to lag struct netdev list + */ +static void ice_lag_destroy_netdev_list(struct ice_lag *lag, + struct ice_lag_netdev_list *ndlist) +{ + struct ice_lag_netdev_list *entry, *n; + + rcu_read_lock(); + list_for_each_entry_safe(entry, n, &ndlist->node, node) { + list_del(&entry->node); + kfree(entry); + } + rcu_read_unlock(); + lag->netdev_head = NULL; +} + /** * ice_lag_move_single_vf_nodes - Move Tx scheduling nodes for single VF * @lag: primary interface LAG struct @@ -597,7 +641,6 @@ ice_lag_move_single_vf_nodes(struct ice_lag *lag, u8 oldport, u8 newport, void ice_lag_move_new_vf_nodes(struct ice_vf *vf) { struct ice_lag_netdev_list ndlist; - struct list_head *tmp, *n; u8 pri_port, act_port; struct ice_lag *lag; struct ice_vsi *vsi; @@ -621,38 +664,15 @@ void ice_lag_move_new_vf_nodes(struct ice_vf *vf) pri_port = pf->hw.port_info->lport; act_port = lag->active_port; - if (lag->upper_netdev) { - struct ice_lag_netdev_list *nl; - struct net_device *tmp_nd; - - INIT_LIST_HEAD(&ndlist.node); - rcu_read_lock(); - for_each_netdev_in_bond_rcu(lag->upper_netdev, tmp_nd) { - nl = kzalloc(sizeof(*nl), GFP_ATOMIC); - if (!nl) - break; - - nl->netdev = tmp_nd; - list_add(&nl->node, &ndlist.node); - } - rcu_read_unlock(); - } - - lag->netdev_head = &ndlist.node; + if (lag->upper_netdev) + ice_lag_build_netdev_list(lag, &ndlist); if (ice_is_feature_supported(pf, ICE_F_SRIOV_LAG) && lag->bonded && lag->primary && pri_port != act_port && !list_empty(lag->netdev_head)) ice_lag_move_single_vf_nodes(lag, pri_port, act_port, vsi->idx); - list_for_each_safe(tmp, n, &ndlist.node) { - struct ice_lag_netdev_list *entry; - - entry = list_entry(tmp, struct ice_lag_netdev_list, node); - list_del(&entry->node); - kfree(entry); - } - lag->netdev_head = NULL; + ice_lag_destroy_netdev_list(lag, &ndlist); new_vf_unlock: mutex_unlock(&pf->lag_mutex); @@ -679,6 +699,29 @@ static void ice_lag_move_vf_nodes(struct ice_lag *lag, u8 oldport, u8 newport) ice_lag_move_single_vf_nodes(lag, oldport, newport, i); } +/** + * ice_lag_move_vf_nodes_cfg - move vf nodes outside LAG netdev event context + * @lag: local lag struct + * @src_prt: lport value for source port + * @dst_prt: lport value for destination port + * + * This function is used to move nodes during an out-of-netdev-event situation, + * primarily when the driver needs to reconfigure or recreate resources. + * + * Must be called while holding the lag_mutex to avoid lag events from + * processing while out-of-sync moves are happening. Also, paired moves, + * such as used in a reset flow, should both be called under the same mutex + * lock to avoid changes between start of reset and end of reset. + */ +void ice_lag_move_vf_nodes_cfg(struct ice_lag *lag, u8 src_prt, u8 dst_prt) +{ + struct ice_lag_netdev_list ndlist; + + ice_lag_build_netdev_list(lag, &ndlist); + ice_lag_move_vf_nodes(lag, src_prt, dst_prt); + ice_lag_destroy_netdev_list(lag, &ndlist); +} + #define ICE_LAG_SRIOV_CP_RECIPE 10 #define ICE_LAG_SRIOV_TRAIN_PKT_LEN 16 @@ -2051,7 +2094,6 @@ void ice_lag_rebuild(struct ice_pf *pf) { struct ice_lag_netdev_list ndlist; struct ice_lag *lag, *prim_lag; - struct list_head *tmp, *n; u8 act_port, loc_port; if (!pf->lag || !pf->lag->bonded) @@ -2063,21 +2105,7 @@ void ice_lag_rebuild(struct ice_pf *pf) if (lag->primary) { prim_lag = lag; } else { - struct ice_lag_netdev_list *nl; - struct net_device *tmp_nd; - - INIT_LIST_HEAD(&ndlist.node); - rcu_read_lock(); - for_each_netdev_in_bond_rcu(lag->upper_netdev, tmp_nd) { - nl = kzalloc(sizeof(*nl), GFP_ATOMIC); - if (!nl) - break; - - nl->netdev = tmp_nd; - list_add(&nl->node, &ndlist.node); - } - rcu_read_unlock(); - lag->netdev_head = &ndlist.node; + ice_lag_build_netdev_list(lag, &ndlist); prim_lag = ice_lag_find_primary(lag); } @@ -2107,13 +2135,7 @@ void ice_lag_rebuild(struct ice_pf *pf) ice_clear_rdma_cap(pf); lag_rebuild_out: - list_for_each_safe(tmp, n, &ndlist.node) { - struct ice_lag_netdev_list *entry; - - entry = list_entry(tmp, struct ice_lag_netdev_list, node); - list_del(&entry->node); - kfree(entry); - } + ice_lag_destroy_netdev_list(lag, &ndlist); mutex_unlock(&pf->lag_mutex); } diff --git a/drivers/net/ethernet/intel/ice/ice_lag.h b/drivers/net/ethernet/intel/ice/ice_lag.h index 9557e8605a07..ede833dfa658 100644 --- a/drivers/net/ethernet/intel/ice/ice_lag.h +++ b/drivers/net/ethernet/intel/ice/ice_lag.h @@ -65,4 +65,5 @@ int ice_init_lag(struct ice_pf *pf); void ice_deinit_lag(struct ice_pf *pf); void ice_lag_rebuild(struct ice_pf *pf); bool ice_lag_is_switchdev_running(struct ice_pf *pf); +void ice_lag_move_vf_nodes_cfg(struct ice_lag *lag, u8 src_prt, u8 dst_prt); #endif /* _ICE_LAG_H_ */ diff --git a/drivers/net/ethernet/intel/ice/ice_vf_lib.c b/drivers/net/ethernet/intel/ice/ice_vf_lib.c index aca1f2ea5034..b7ae09952156 100644 --- a/drivers/net/ethernet/intel/ice/ice_vf_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_vf_lib.c @@ -829,12 +829,16 @@ static void ice_notify_vf_reset(struct ice_vf *vf) int ice_reset_vf(struct ice_vf *vf, u32 flags) { struct ice_pf *pf = vf->pf; + struct ice_lag *lag; struct ice_vsi *vsi; + u8 act_prt, pri_prt; struct device *dev; int err = 0; bool rsd; dev = ice_pf_to_dev(pf); + act_prt = ICE_LAG_INVALID_PORT; + pri_prt = pf->hw.port_info->lport; if (flags & ICE_VF_RESET_NOTIFY) ice_notify_vf_reset(vf); @@ -845,6 +849,17 @@ int ice_reset_vf(struct ice_vf *vf, u32 flags) return 0; } + lag = pf->lag; + mutex_lock(&pf->lag_mutex); + if (lag && lag->bonded && lag->primary) { + act_prt = lag->active_port; + if (act_prt != pri_prt && act_prt != ICE_LAG_INVALID_PORT && + lag->upper_netdev) + ice_lag_move_vf_nodes_cfg(lag, act_prt, pri_prt); + else + act_prt = ICE_LAG_INVALID_PORT; + } + if (flags & ICE_VF_RESET_LOCK) mutex_lock(&vf->cfg_lock); else @@ -937,6 +952,11 @@ out_unlock: if (flags & ICE_VF_RESET_LOCK) mutex_unlock(&vf->cfg_lock); + if (lag && lag->bonded && lag->primary && + act_prt != ICE_LAG_INVALID_PORT) + ice_lag_move_vf_nodes_cfg(lag, pri_prt, act_prt); + mutex_unlock(&pf->lag_mutex); + return err; } diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl.c b/drivers/net/ethernet/intel/ice/ice_virtchnl.c index cdf17b1e2f25..de11b3186bd7 100644 --- a/drivers/net/ethernet/intel/ice/ice_virtchnl.c +++ b/drivers/net/ethernet/intel/ice/ice_virtchnl.c @@ -1603,9 +1603,24 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg) (struct virtchnl_vsi_queue_config_info *)msg; struct virtchnl_queue_pair_info *qpi; struct ice_pf *pf = vf->pf; + struct ice_lag *lag; struct ice_vsi *vsi; + u8 act_prt, pri_prt; int i = -1, q_idx; + lag = pf->lag; + mutex_lock(&pf->lag_mutex); + act_prt = ICE_LAG_INVALID_PORT; + pri_prt = pf->hw.port_info->lport; + if (lag && lag->bonded && lag->primary) { + act_prt = lag->active_port; + if (act_prt != pri_prt && act_prt != ICE_LAG_INVALID_PORT && + lag->upper_netdev) + ice_lag_move_vf_nodes_cfg(lag, act_prt, pri_prt); + else + act_prt = ICE_LAG_INVALID_PORT; + } + if (!test_bit(ICE_VF_STATE_ACTIVE, vf->vf_states)) goto error_param; @@ -1729,6 +1744,11 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg) } } + if (lag && lag->bonded && lag->primary && + act_prt != ICE_LAG_INVALID_PORT) + ice_lag_move_vf_nodes_cfg(lag, pri_prt, act_prt); + mutex_unlock(&pf->lag_mutex); + /* send the response to the VF */ return ice_vc_send_msg_to_vf(vf, VIRTCHNL_OP_CONFIG_VSI_QUEUES, VIRTCHNL_STATUS_SUCCESS, NULL, 0); @@ -1743,6 +1763,11 @@ error_param: vf->vf_id, i); } + if (lag && lag->bonded && lag->primary && + act_prt != ICE_LAG_INVALID_PORT) + ice_lag_move_vf_nodes_cfg(lag, pri_prt, act_prt); + mutex_unlock(&pf->lag_mutex); + ice_lag_move_new_vf_nodes(vf); /* send the response to the VF */ -- cgit v1.2.3 From 91fdb30ddfdb651509914d3ed0a0302712540fed Mon Sep 17 00:00:00 2001 From: Jiawen Wu Date: Tue, 28 Nov 2023 17:59:28 +0800 Subject: net: libwx: fix memory leak on msix entry Since pci_free_irq_vectors() set pdev->msix_enabled as 0 in the calling of pci_msix_shutdown(), wx->msix_entries is never freed. Reordering the lines to fix the memory leak. Cc: stable@vger.kernel.org Fixes: 3f703186113f ("net: libwx: Add irq flow functions") Signed-off-by: Jiawen Wu Reviewed-by: Kalesh AP Link: https://lore.kernel.org/r/20231128095928.1083292-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/wangxun/libwx/wx_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.c b/drivers/net/ethernet/wangxun/libwx/wx_lib.c index 2823861e5a92..a5a50b5a8816 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_lib.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.c @@ -1972,11 +1972,11 @@ void wx_reset_interrupt_capability(struct wx *wx) if (!pdev->msi_enabled && !pdev->msix_enabled) return; - pci_free_irq_vectors(wx->pdev); if (pdev->msix_enabled) { kfree(wx->msix_entries); wx->msix_entries = NULL; } + pci_free_irq_vectors(wx->pdev); } EXPORT_SYMBOL(wx_reset_interrupt_capability); -- cgit v1.2.3 From d8eb6ea4b302e7ff78535c205510e359ac10a0bd Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:34 +0200 Subject: net: ravb: Check return value of reset_control_deassert() reset_control_deassert() could return an error. Some devices cannot work if reset signal de-assert operation fails. To avoid this check the return code of reset_control_deassert() in ravb_probe() and take proper action. Along with it, the free_netdev() call from the error path was moved after reset_control_assert() on its own label (out_free_netdev) to free netdev in case reset_control_deassert() fails. Fixes: 0d13a1a464a0 ("ravb: Add reset support") Reviewed-by: Sergey Shtylyov Reviewed-by: Philipp Zabel Signed-off-by: Claudiu Beznea Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 7c007ecd3ff6..35a6b0a26dcd 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2654,7 +2654,10 @@ static int ravb_probe(struct platform_device *pdev) ndev->features = info->net_features; ndev->hw_features = info->net_hw_features; - reset_control_deassert(rstc); + error = reset_control_deassert(rstc); + if (error) + goto out_free_netdev; + pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -2881,11 +2884,11 @@ out_disable_gptp_clk: out_disable_refclk: clk_disable_unprepare(priv->refclk); out_release: - free_netdev(ndev); - pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); reset_control_assert(rstc); +out_free_netdev: + free_netdev(ndev); return error; } -- cgit v1.2.3 From 88b74831faaee455c2af380382d979fc38e79270 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:35 +0200 Subject: net: ravb: Use pm_runtime_resume_and_get() pm_runtime_get_sync() may return an error. In case it returns with an error dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get() takes care of this. Thus use it. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reviewed-by: Sergey Shtylyov Signed-off-by: Claudiu Beznea Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 35a6b0a26dcd..96b38d1e39ae 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2659,7 +2659,9 @@ static int ravb_probe(struct platform_device *pdev) goto out_free_netdev; pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); + error = pm_runtime_resume_and_get(&pdev->dev); + if (error < 0) + goto out_rpm_disable; if (info->multi_irqs) { if (info->err_mgmt_irqs) @@ -2885,6 +2887,7 @@ out_disable_refclk: clk_disable_unprepare(priv->refclk); out_release: pm_runtime_put(&pdev->dev); +out_rpm_disable: pm_runtime_disable(&pdev->dev); reset_control_assert(rstc); out_free_netdev: -- cgit v1.2.3 From d78c0ced60d5e2f8b5a4a0468a5c400b24aeadf2 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:36 +0200 Subject: net: ravb: Make write access to CXR35 first before accessing other EMAC registers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the description of CXR35 register (chapter "PHY interface select register (CXR35)"): "After release reset, make write-access to this register before making write-access to other registers (except MDIOMOD). Even if not need to change the value of this register, make write-access to this register at least one time. Because RGMII/MII MODE is recognized by accessing this register". The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S, RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC register that is to be configured. Note [A] from chapter "PHY interface select register (CXR35)" specifies the following: [A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII in APB Clock 100 MHz. (1) To use RGMII interface, Set ‘H’03E8_0000’ to this register. (2) To use MII interface, Set ‘H’03E8_0002’ to this register. Take into account these indication. Fixes: 1089877ada8d ("ravb: Add RZ/G2L MII interface support") Reviewed-by: Sergey Shtylyov Signed-off-by: Claudiu Beznea Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 96b38d1e39ae..4d57ecfdfe61 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -515,6 +515,15 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) { struct ravb_private *priv = netdev_priv(ndev); + if (priv->phy_interface == PHY_INTERFACE_MODE_MII) { + ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_MII, CXR35); + ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, 0); + } else { + ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_RGMII, CXR35); + ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, + CXR31_SEL_LINK0); + } + /* Receive frame limit set register */ ravb_write(ndev, GBETH_RX_BUFF_MAX + ETH_FCS_LEN, RFLR); @@ -537,14 +546,6 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) /* E-MAC interrupt enable register */ ravb_write(ndev, ECSIPR_ICDIP, ECSIPR); - - if (priv->phy_interface == PHY_INTERFACE_MODE_MII) { - ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, 0); - ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_MII, CXR35); - } else { - ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, - CXR31_SEL_LINK0); - } } static void ravb_emac_init_rcar(struct net_device *ndev) -- cgit v1.2.3 From 6f32c086602050fc11157adeafaa1c1eb393f0af Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:37 +0200 Subject: net: ravb: Start TX queues after HW initialization succeeded ravb_phy_start() may fail. If that happens, the TX queues will remain started. Thus, move the netif_tx_start_all_queues() after PHY is successfully initialized. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reviewed-by: Sergey Shtylyov Signed-off-by: Claudiu Beznea Reviewed-by: Kalesh AP Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 4d57ecfdfe61..5f1fb94c5ab7 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1812,13 +1812,13 @@ static int ravb_open(struct net_device *ndev) if (info->gptp) ravb_ptp_init(ndev, priv->pdev); - netif_tx_start_all_queues(ndev); - /* PHY control start */ error = ravb_phy_start(ndev); if (error) goto out_ptp_stop; + netif_tx_start_all_queues(ndev); + return 0; out_ptp_stop: -- cgit v1.2.3 From eac16a733427ba0de2449ffc7bd3da32ddb65cb7 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:38 +0200 Subject: net: ravb: Stop DMA in case of failures on ravb_open() In case ravb_phy_start() returns with error the settings applied in ravb_dmac_init() are not reverted (e.g. config mode). For this call ravb_stop_dma() on failure path of ravb_open(). Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver") Reviewed-by: Sergey Shtylyov Signed-off-by: Claudiu Beznea Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 5f1fb94c5ab7..6c9e92676106 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1825,6 +1825,7 @@ out_ptp_stop: /* Stop PTP Clock driver */ if (info->gptp) ravb_ptp_stop(ndev); + ravb_stop_dma(ndev); out_free_irq_mgmta: if (!info->multi_irqs) goto out_free_irq; -- cgit v1.2.3 From edf9bc396e05081ca281ffb0cd41e44db478ff26 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:39 +0200 Subject: net: ravb: Keep reverse order of operations in ravb_remove() On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet MACs and PHYs it has been discovered that doing unbind/bind for ravb driver in a loop leads to wrong speed and duplex for Ethernet links and broken connectivity (the connectivity cannot be restored even with bringing interface down/up). Before doing unbind/bind the Ethernet interfaces were configured though systemd. The sh instructions used to do unbind/bind were: $ cd /sys/bus/platform/drivers/ravb/ $ while :; do echo 11c30000.ethernet > unbind ; \ echo 11c30000.ethernet > bind; done It has been discovered that there is a race b/w IOCTLs initialized by systemd at the response of success binding and the "ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as follows: 1/ as a result of bind success the user space open/configures the interfaces tough an IOCTL; the following stack trace has been identified on RZ/G3S: Call trace: dump_backtrace+0x9c/0x100 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 ravb_open+0x70/0xa58 __dev_open+0xf4/0x1e8 __dev_change_flags+0x198/0x218 dev_change_flags+0x2c/0x80 devinet_ioctl+0x640/0x708 inet_ioctl+0x1e4/0x200 sock_do_ioctl+0x50/0x108 sock_ioctl+0x240/0x358 __arm64_sys_ioctl+0xb0/0x100 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0xb8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x190/0x198 2/ this call may execute concurrently with ravb_remove() as the unbind/bind operation was executed in a loop 3/ if the operation mode is changed to RESET (through ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove()) while the above ravb_open() is in progress it may lead to MAC (or PHY, or MAC-PHY connection, the right point hasn't been identified at the moment) to be broken, thus the Ethernet connectivity fails to restore. The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC)) after unregister_netdev() to avoid resetting the controller while the netdev interface is still registered. To avoid future issues in ravb_remove(), the patch follows the proper order of operations in ravb_remove(): reverse order compared with ravb_probe(). This avoids described races as the IOCTLs as well as unregister_netdev() (called now at the beginning of ravb_remove()) calls rtnl_lock() before continuing and IOCTLs check (though devinet_ioctl()) if device is still registered just after taking the lock: int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr) { // ... rtnl_lock(); ret = -ENODEV; dev = __dev_get_by_name(net, ifr->ifr_name); if (!dev) goto done; // ... done: rtnl_unlock(); out: return ret; } Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reviewed-by: Sergey Shtylyov Signed-off-by: Claudiu Beznea Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 6c9e92676106..664eda4b5a11 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2903,22 +2903,26 @@ static void ravb_remove(struct platform_device *pdev) struct ravb_private *priv = netdev_priv(ndev); const struct ravb_hw_info *info = priv->info; - /* Stop PTP Clock driver */ - if (info->ccc_gac) - ravb_ptp_stop(ndev); - - clk_disable_unprepare(priv->gptp_clk); - clk_disable_unprepare(priv->refclk); - - /* Set reset mode */ - ravb_write(ndev, CCC_OPC_RESET, CCC); unregister_netdev(ndev); if (info->nc_queues) netif_napi_del(&priv->napi[RAVB_NC]); netif_napi_del(&priv->napi[RAVB_BE]); + ravb_mdio_release(priv); + + /* Stop PTP Clock driver */ + if (info->ccc_gac) + ravb_ptp_stop(ndev); + dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat, priv->desc_bat_dma); + + /* Set reset mode */ + ravb_write(ndev, CCC_OPC_RESET, CCC); + + clk_disable_unprepare(priv->gptp_clk); + clk_disable_unprepare(priv->refclk); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); reset_control_assert(priv->rstc); -- cgit v1.2.3 From 9572c949385aa2ef10368287c439bcb7935137c8 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Wed, 29 Nov 2023 10:53:42 +0530 Subject: octeontx2-pf: Add missing mutex lock in otx2_get_pauseparam All the mailbox messages sent to AF needs to be guarded by mutex lock. Add the missing lock in otx2_get_pauseparam function. Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool") Signed-off-by: Subbaraya Sundeep Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c index 9efcec549834..53f6258a973c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c @@ -334,9 +334,12 @@ static void otx2_get_pauseparam(struct net_device *netdev, if (is_otx2_lbkvf(pfvf->pdev)) return; + mutex_lock(&pfvf->mbox.lock); req = otx2_mbox_alloc_msg_cgx_cfg_pause_frm(&pfvf->mbox); - if (!req) + if (!req) { + mutex_unlock(&pfvf->mbox.lock); return; + } if (!otx2_sync_mbox_msg(&pfvf->mbox)) { rsp = (struct cgx_pause_frm_cfg *) @@ -344,6 +347,7 @@ static void otx2_get_pauseparam(struct net_device *netdev, pause->rx_pause = rsp->rx_pause; pause->tx_pause = rsp->tx_pause; } + mutex_unlock(&pfvf->mbox.lock); } static int otx2_set_pauseparam(struct net_device *netdev, -- cgit v1.2.3 From 830139e7b6911266a84a77e1f18abf758995cc89 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Wed, 29 Nov 2023 11:11:48 +0530 Subject: octeontx2-af: Check return value of nix_get_nixlf before using nixlf If a NIXLF is not attached to a PF/VF device then nix_get_nixlf function fails and returns proper error code. But npc_get_default_entry_action does not check it and uses garbage value in subsequent calls. Fix this by cheking the return value of nix_get_nixlf. Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Subbaraya Sundeep Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index 16cfc802e348..f65805860c8d 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -389,7 +389,13 @@ static u64 npc_get_default_entry_action(struct rvu *rvu, struct npc_mcam *mcam, int bank, nixlf, index; /* get ucast entry rule entry index */ - nix_get_nixlf(rvu, pf_func, &nixlf, NULL); + if (nix_get_nixlf(rvu, pf_func, &nixlf, NULL)) { + dev_err(rvu->dev, "%s: nixlf not attached to pcifunc:0x%x\n", + __func__, pf_func); + /* Action 0 is drop */ + return 0; + } + index = npc_get_nixlf_mcam_index(mcam, pf_func, nixlf, NIXLF_UCAST_ENTRY); bank = npc_get_bank(mcam, index); -- cgit v1.2.3 From 16b55b1f2269962fb6b5154b8bf43f37c9a96637 Mon Sep 17 00:00:00 2001 From: Thinh Tran Date: Thu, 30 Nov 2023 18:19:11 -0600 Subject: net/tg3: fix race condition in tg3_reset_task() When an EEH error is encountered by a PCI adapter, the EEH driver modifies the PCI channel's state as shown below: enum { /* I/O channel is in normal state */ pci_channel_io_normal = (__force pci_channel_state_t) 1, /* I/O to channel is blocked */ pci_channel_io_frozen = (__force pci_channel_state_t) 2, /* PCI card is dead */ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, }; If the same EEH error then causes the tg3 driver's transmit timeout logic to execute, the tg3_tx_timeout() function schedules a reset task via tg3_reset_task_schedule(), which may cause a race condition between the tg3 and EEH driver as both attempt to recover the HW via a reset action. EEH driver gets error event --> eeh_set_channel_state() and set device to one of error state above scheduler: tg3_reset_task() get returned error from tg3_init_hw() --> dev_close() shuts down the interface tg3_io_slot_reset() and tg3_io_resume() fail to reset/resume the device To resolve this issue, we avoid the race condition by checking the PCI channel state in the tg3_reset_task() function and skip the tg3 driver initiated reset when the PCI channel is not in the normal state. (The driver has no access to tg3 device registers at this point and cannot even complete the reset task successfully without external assistance.) We'll leave the reset procedure to be managed by the EEH driver which calls the tg3_io_error_detected(), tg3_io_slot_reset() and tg3_io_resume() functions as appropriate. Adding the same checking in tg3_dump_state() to avoid dumping all device registers when the PCI channel is not in the normal state. Signed-off-by: Thinh Tran Tested-by: Venkata Sai Duggi Reviewed-by: David Christensen Reviewed-by: Michael Chan Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/tg3.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 48b6191efa56..f52830dfb26a 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6474,6 +6474,14 @@ static void tg3_dump_state(struct tg3 *tp) int i; u32 *regs; + /* If it is a PCI error, all registers will be 0xffff, + * we don't dump them out, just report the error and return + */ + if (tp->pdev->error_state != pci_channel_io_normal) { + netdev_err(tp->dev, "PCI channel ERROR!\n"); + return; + } + regs = kzalloc(TG3_REG_BLK_SIZE, GFP_ATOMIC); if (!regs) return; @@ -11259,7 +11267,8 @@ static void tg3_reset_task(struct work_struct *work) rtnl_lock(); tg3_full_lock(tp, 0); - if (tp->pcierr_recovery || !netif_running(tp->dev)) { + if (tp->pcierr_recovery || !netif_running(tp->dev) || + tp->pdev->error_state != pci_channel_io_normal) { tg3_flag_clear(tp, RESET_TASK_PENDING); tg3_full_unlock(tp); rtnl_unlock(); -- cgit v1.2.3 From 6c89f49964375c904cea33c0247467873f4daf2c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 29 Nov 2023 21:58:53 -0800 Subject: hv_netvsc: rndis_filter needs to select NLS rndis_filter uses utf8s_to_utf16s() which is provided by setting NLS, so select NLS to fix the build error: ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined! Fixes: 1ce09e899d28 ("hyperv: Add support for setting MAC from within guests") Signed-off-by: Randy Dunlap Cc: Haiyang Zhang Cc: K. Y. Srinivasan Cc: Wei Liu Cc: Dexuan Cui Reviewed-by: Simon Horman Tested-by: Simon Horman # build-tested Reviewed-by: Michael Kelley Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski --- drivers/net/hyperv/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/Kconfig b/drivers/net/hyperv/Kconfig index ca7bf7f897d3..c8cbd85adcf9 100644 --- a/drivers/net/hyperv/Kconfig +++ b/drivers/net/hyperv/Kconfig @@ -3,5 +3,6 @@ config HYPERV_NET tristate "Microsoft Hyper-V virtual network driver" depends on HYPERV select UCS2_STRING + select NLS help Select this option to enable the Hyper-V virtual network driver. -- cgit v1.2.3 From 4b0768b6556af56ee9b7cf4e68452a2b6289ae45 Mon Sep 17 00:00:00 2001 From: ChunHao Lin Date: Wed, 29 Nov 2023 23:53:50 +0800 Subject: r8169: fix rtl8125b PAUSE frames blasting when suspended When FIFO reaches near full state, device will issue pause frame. If pause slot is enabled(set to 1), in this time, device will issue pause frame only once. But if pause slot is disabled(set to 0), device will keep sending pause frames until FIFO reaches near empty state. When pause slot is disabled, if there is no one to handle receive packets, device FIFO will reach near full state and keep sending pause frames. That will impact entire local area network. This issue can be reproduced in Chromebox (not Chromebook) in developer mode running a test image (and v5.10 kernel): 1) ping -f $CHROMEBOX (from workstation on same local network) 2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX 3) ping $ROUTER (wait until ping fails from workstation) Takes about ~20-30 seconds after step 2 for the local network to stop working. Fix this issue by enabling pause slot to only send pause frame once when FIFO reaches near full state. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Reported-by: Grant Grundler Tested-by: Grant Grundler Cc: stable@vger.kernel.org Signed-off-by: ChunHao Lin Reviewed-by: Jacob Keller Reviewed-by: Heiner Kallweit Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/realtek/r8169_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 62cabeeb842a..bb787a52bc75 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -196,6 +196,7 @@ enum rtl_registers { /* No threshold before first PCI xfer */ #define RX_FIFO_THRESH (7 << RXCFG_FIFO_SHIFT) #define RX_EARLY_OFF (1 << 11) +#define RX_PAUSE_SLOT_ON (1 << 11) /* 8125b and later */ #define RXCFG_DMA_SHIFT 8 /* Unlimited maximum PCI burst. */ #define RX_DMA_BURST (7 << RXCFG_DMA_SHIFT) @@ -2306,9 +2307,13 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp) case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_53: RTL_W32(tp, RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF); break; - case RTL_GIGA_MAC_VER_61 ... RTL_GIGA_MAC_VER_63: + case RTL_GIGA_MAC_VER_61: RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST); break; + case RTL_GIGA_MAC_VER_63: + RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST | + RX_PAUSE_SLOT_ON); + break; default: RTL_W32(tp, RxConfig, RX128_INT_EN | RX_DMA_BURST); break; -- cgit v1.2.3 From e62adaeecdc6a1e8ae86e7f3f9f8223a3ede94f5 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Nov 2023 13:25:20 -0800 Subject: r8152: Hold the rtnl_lock for all of reset As of commit d9962b0d4202 ("r8152: Block future register access if register access fails") there is a race condition that can happen between the USB device reset thread and napi_enable() (not) getting called during rtl8152_open(). Specifically: * While rtl8152_open() is running we get a register access error that's _not_ -ENODEV and queue up a USB reset. * rtl8152_open() exits before calling napi_enable() due to any reason (including usb_submit_urb() returning an error). In that case: * Since the USB reset is perform in a separate thread asynchronously, it can run at anytime USB device lock is not held - even before rtl8152_open() has exited with an error and caused __dev_open() to clear the __LINK_STATE_START bit. * The rtl8152_pre_reset() will notice that the netif_running() returns true (since __LINK_STATE_START wasn't cleared) so it won't exit early. * rtl8152_pre_reset() will then hang in napi_disable() because napi_enable() was never called. We can fix the race by making sure that the r8152 reset routines don't run at the same time as we're opening the device. Specifically we need the reset routines in their entirety rely on the return value of netif_running(). The only way to reliably depend on that is for them to hold the rntl_lock() mutex for the duration of reset. Grabbing the rntl_lock() mutex for the duration of reset seems like a long time, but reset is not expected to be common and the rtnl_lock() mutex is already held for long durations since the core grabs it around the open/close calls. Fixes: d9962b0d4202 ("r8152: Block future register access if register access fails") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 2c5c1e91ded6..d6edf0254599 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -8397,6 +8397,8 @@ static int rtl8152_pre_reset(struct usb_interface *intf) struct r8152 *tp = usb_get_intfdata(intf); struct net_device *netdev; + rtnl_lock(); + if (!tp || !test_bit(PROBED_WITH_NO_ERRORS, &tp->flags)) return 0; @@ -8428,20 +8430,17 @@ static int rtl8152_post_reset(struct usb_interface *intf) struct sockaddr sa; if (!tp || !test_bit(PROBED_WITH_NO_ERRORS, &tp->flags)) - return 0; + goto exit; rtl_set_accessible(tp); /* reset the MAC address in case of policy change */ - if (determine_ethernet_addr(tp, &sa) >= 0) { - rtnl_lock(); + if (determine_ethernet_addr(tp, &sa) >= 0) dev_set_mac_address (tp->netdev, &sa, NULL); - rtnl_unlock(); - } netdev = tp->netdev; if (!netif_running(netdev)) - return 0; + goto exit; set_bit(WORK_ENABLE, &tp->flags); if (netif_carrier_ok(netdev)) { @@ -8460,6 +8459,8 @@ static int rtl8152_post_reset(struct usb_interface *intf) if (!list_empty(&tp->rx_done)) napi_schedule(&tp->napi); +exit: + rtnl_unlock(); return 0; } -- cgit v1.2.3 From 32a574c7e2685aa8138754d4d755f9246cc6bd48 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Nov 2023 13:25:21 -0800 Subject: r8152: Add RTL8152_INACCESSIBLE checks to more loops Previous commits added checks for RTL8152_INACCESSIBLE in the loops in the driver. There are still a few more that keep tripping the driver up in error cases and make things take longer than they should. Add those in. All the loops that are part of this commit existed in some form or another since the r8152 driver was first introduced, though RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit 715f67f33af4 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE") Fixes: ac718b69301c ("net/usb: new driver for RTL8152") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index d6edf0254599..e9955701f455 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3000,6 +3000,8 @@ static void rtl8152_nic_reset(struct r8152 *tp) ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST); for (i = 0; i < 1000; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + break; if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST)) break; usleep_range(100, 400); @@ -3329,6 +3331,8 @@ static void rtl_disable(struct r8152 *tp) rxdy_gated_en(tp, true); for (i = 0; i < 1000; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + break; ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY) break; @@ -3336,6 +3340,8 @@ static void rtl_disable(struct r8152 *tp) } for (i = 0; i < 1000; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + break; if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY) break; usleep_range(1000, 2000); @@ -5499,6 +5505,8 @@ static void wait_oob_link_list_ready(struct r8152 *tp) int i; for (i = 0; i < 1000; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + break; ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); if (ocp_data & LINK_LIST_READY) break; -- cgit v1.2.3 From 8a67b47fced9f6a84101eb9ec5ce4c7d64204bc7 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Nov 2023 13:25:22 -0800 Subject: r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash() Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8156b_wait_loading_flash(). Fixes: 195aae321c82 ("r8152: support new chips") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index e9955701f455..c4dd81e2421f 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5521,6 +5521,8 @@ static void r8156b_wait_loading_flash(struct r8152 *tp) int i; for (i = 0; i < 100; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + break; if (ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & GPHY_PATCH_DONE) break; usleep_range(1000, 2000); -- cgit v1.2.3 From 8c53a7bd706535a9cf4e2ec3a4e8d61d46353ca0 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Nov 2023 13:25:23 -0800 Subject: r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1() Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_pre_firmware_1(). Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index c4dd81e2421f..3958eb622d47 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5645,6 +5645,8 @@ static int r8153_pre_firmware_1(struct r8152 *tp) for (i = 0; i < 104; i++) { u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL); + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + return -ENODEV; if (!(ocp_data & WTD1_EN)) break; usleep_range(1000, 2000); -- cgit v1.2.3 From 79321a793945fdbff2f405f84712d0ab81bed287 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Nov 2023 13:25:24 -0800 Subject: r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en() Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_aldps_en(). Fixes: 4214cc550bf9 ("r8152: check if disabling ALDPS is finished") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 3958eb622d47..fcdc9ba0f826 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5803,6 +5803,8 @@ static void r8153_aldps_en(struct r8152 *tp, bool enable) data &= ~EN_ALDPS; ocp_reg_write(tp, OCP_POWER_CFG, data); for (i = 0; i < 20; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + return; usleep_range(1000, 2000); if (ocp_read_word(tp, MCU_TYPE_PLA, 0xe000) & 0x0100) break; -- cgit v1.2.3 From 6b17a597fc2f13aaaa0a2780eb7edb9ae7ac9aea Mon Sep 17 00:00:00 2001 From: Thomas Reichinger Date: Thu, 30 Nov 2023 12:35:03 +0100 Subject: arcnet: restoring support for multiple Sohard Arcnet cards Probe of Sohard Arcnet cards fails, if 2 or more cards are installed in a system. See kernel log: [ 2.759203] arcnet: arcnet loaded [ 2.763648] arcnet:com20020: COM20020 chipset support (by David Woodhouse et al.) [ 2.770585] arcnet:com20020_pci: COM20020 PCI support [ 2.772295] com20020 0000:02:00.0: enabling device (0000 -> 0003) [ 2.772354] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.071301] com20020 0000:02:00.0 arc0-0 (uninitialized): PCI COM20020: station FFh found at F080h, IRQ 101. [ 3.071305] com20020 0000:02:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.071534] com20020 0000:07:00.0: enabling device (0000 -> 0003) [ 3.071581] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.369501] com20020 0000:07:00.0: Led pci:green:tx:0-0 renamed to pci:green:tx:0-0_1 due to name collision [ 3.369535] com20020 0000:07:00.0: Led pci:red:recon:0-0 renamed to pci:red:recon:0-0_1 due to name collision [ 3.370586] com20020 0000:07:00.0 arc0-0 (uninitialized): PCI COM20020: station E1h found at C000h, IRQ 35. [ 3.370589] com20020 0000:07:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.370608] com20020: probe of 0000:07:00.0 failed with error -5 commit 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support") changes the device name of all COM20020 based PCI cards, even if only some cards support this: snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); The error happens because all Sohard Arcnet cards would be called arc0-0, since the Sohard Arcnet cards don't have a PLX rotary coder. I.e. EAE Arcnet cards have a PLX rotary coder, which sets the first decimal, ensuring unique devices names. This patch adds two new card feature flags to indicate which cards support LEDs and the PLX rotary coder. For EAE based cards the names still depend on the PLX rotary coder (untested, since missing EAE hardware). For Sohard based cards, this patch will result in devices being called arc0, arc1, ... (tested). Signed-off-by: Thomas Reichinger Fixes: 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support") Link: https://lore.kernel.org/r/20231130113503.6812-1-thomas.reichinger@sohard.de Signed-off-by: Jakub Kicinski --- drivers/net/arcnet/arcdevice.h | 2 + drivers/net/arcnet/com20020-pci.c | 89 ++++++++++++++++++++------------------- 2 files changed, 48 insertions(+), 43 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arcnet/arcdevice.h b/drivers/net/arcnet/arcdevice.h index 19e996a829c9..b54275389f8a 100644 --- a/drivers/net/arcnet/arcdevice.h +++ b/drivers/net/arcnet/arcdevice.h @@ -186,6 +186,8 @@ do { \ #define ARC_IS_5MBIT 1 /* card default speed is 5MBit */ #define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit, but default is 2.5MBit. */ +#define ARC_HAS_LED 4 /* card has software controlled LEDs */ +#define ARC_HAS_ROTARY 8 /* card has rotary encoder */ /* information needed to define an encapsulation driver */ struct ArcProto { diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index c580acb8b1d3..7b5c8bb02f11 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -213,12 +213,13 @@ static int com20020pci_probe(struct pci_dev *pdev, if (!strncmp(ci->name, "EAE PLX-PCI FB2", 15)) lp->backplane = 1; - /* Get the dev_id from the PLX rotary coder */ - if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) - dev_id_mask = 0x3; - dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask; - - snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); + if (ci->flags & ARC_HAS_ROTARY) { + /* Get the dev_id from the PLX rotary coder */ + if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) + dev_id_mask = 0x3; + dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask; + snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); + } if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { pr_err("IO address %Xh is empty!\n", ioaddr); @@ -230,6 +231,10 @@ static int com20020pci_probe(struct pci_dev *pdev, goto err_free_arcdev; } + ret = com20020_found(dev, IRQF_SHARED); + if (ret) + goto err_free_arcdev; + card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev), GFP_KERNEL); if (!card) { @@ -239,41 +244,39 @@ static int com20020pci_probe(struct pci_dev *pdev, card->index = i; card->pci_priv = priv; - card->tx_led.brightness_set = led_tx_set; - card->tx_led.default_trigger = devm_kasprintf(&pdev->dev, - GFP_KERNEL, "arc%d-%d-tx", - dev->dev_id, i); - card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, - "pci:green:tx:%d-%d", - dev->dev_id, i); - - card->tx_led.dev = &dev->dev; - card->recon_led.brightness_set = led_recon_set; - card->recon_led.default_trigger = devm_kasprintf(&pdev->dev, - GFP_KERNEL, "arc%d-%d-recon", - dev->dev_id, i); - card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, - "pci:red:recon:%d-%d", - dev->dev_id, i); - card->recon_led.dev = &dev->dev; - card->dev = dev; - - ret = devm_led_classdev_register(&pdev->dev, &card->tx_led); - if (ret) - goto err_free_arcdev; - ret = devm_led_classdev_register(&pdev->dev, &card->recon_led); - if (ret) - goto err_free_arcdev; - - dev_set_drvdata(&dev->dev, card); - - ret = com20020_found(dev, IRQF_SHARED); - if (ret) - goto err_free_arcdev; - - devm_arcnet_led_init(dev, dev->dev_id, i); + if (ci->flags & ARC_HAS_LED) { + card->tx_led.brightness_set = led_tx_set; + card->tx_led.default_trigger = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "arc%d-%d-tx", + dev->dev_id, i); + card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "pci:green:tx:%d-%d", + dev->dev_id, i); + + card->tx_led.dev = &dev->dev; + card->recon_led.brightness_set = led_recon_set; + card->recon_led.default_trigger = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "arc%d-%d-recon", + dev->dev_id, i); + card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "pci:red:recon:%d-%d", + dev->dev_id, i); + card->recon_led.dev = &dev->dev; + + ret = devm_led_classdev_register(&pdev->dev, &card->tx_led); + if (ret) + goto err_free_arcdev; + + ret = devm_led_classdev_register(&pdev->dev, &card->recon_led); + if (ret) + goto err_free_arcdev; + + dev_set_drvdata(&dev->dev, card); + devm_arcnet_led_init(dev, dev->dev_id, i); + } + card->dev = dev; list_add(&card->list, &priv->list_dev); continue; @@ -329,7 +332,7 @@ static struct com20020_pci_card_info card_info_5mbit = { }; static struct com20020_pci_card_info card_info_sohard = { - .name = "PLX-PCI", + .name = "SOHARD SH ARC-PCI", .devcount = 1, /* SOHARD needs PCI base addr 4 */ .chan_map_tbl = { @@ -364,7 +367,7 @@ static struct com20020_pci_card_info card_info_eae_arc1 = { }, }, .rotary = 0x0, - .flags = ARC_CAN_10MBIT, + .flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT, }; static struct com20020_pci_card_info card_info_eae_ma1 = { @@ -396,7 +399,7 @@ static struct com20020_pci_card_info card_info_eae_ma1 = { }, }, .rotary = 0x0, - .flags = ARC_CAN_10MBIT, + .flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT, }; static struct com20020_pci_card_info card_info_eae_fb2 = { @@ -421,7 +424,7 @@ static struct com20020_pci_card_info card_info_eae_fb2 = { }, }, .rotary = 0x0, - .flags = ARC_CAN_10MBIT, + .flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT, }; static const struct pci_device_id com20020pci_id_table[] = { -- cgit v1.2.3 From adbf100fc47001c93d7e513ecac6fd6e04d5b4a1 Mon Sep 17 00:00:00 2001 From: Naveen Mamindlapalli Date: Fri, 1 Dec 2023 11:03:30 +0530 Subject: octeontx2-pf: consider both Rx and Tx packet stats for adaptive interrupt coalescing The current adaptive interrupt coalescing code updates only rx packet stats for dim algorithm. This patch also updates tx packet stats which will be useful when there is only tx traffic. Also moved configuring hardware adaptive interrupt setting to driver dim callback. Fixes: 6e144b47f560 ("octeontx2-pf: Add support for adaptive interrupt coalescing") Signed-off-by: Naveen Mamindlapalli Signed-off-by: Suman Ghosh Reviewed-by: Wojciech Drewek Link: https://lore.kernel.org/r/20231201053330.3903694-1-sumang@marvell.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 9 +++++++++ .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.c | 20 ++++++++++---------- 2 files changed, 19 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 532e324bdcc8..0c17ebdda148 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1688,6 +1688,14 @@ static void otx2_do_set_rx_mode(struct otx2_nic *pf) mutex_unlock(&pf->mbox.lock); } +static void otx2_set_irq_coalesce(struct otx2_nic *pfvf) +{ + int cint; + + for (cint = 0; cint < pfvf->hw.cint_cnt; cint++) + otx2_config_irq_coalescing(pfvf, cint); +} + static void otx2_dim_work(struct work_struct *w) { struct dim_cq_moder cur_moder; @@ -1703,6 +1711,7 @@ static void otx2_dim_work(struct work_struct *w) CQ_TIMER_THRESH_MAX : cur_moder.usec; pfvf->hw.cq_ecount_wait = (cur_moder.pkts > NAPI_POLL_WEIGHT) ? NAPI_POLL_WEIGHT : cur_moder.pkts; + otx2_set_irq_coalesce(pfvf); dim->state = DIM_START_MEASURE; } diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c index 6ee15f3c25ed..4d519ea833b2 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c @@ -512,11 +512,18 @@ static void otx2_adjust_adaptive_coalese(struct otx2_nic *pfvf, struct otx2_cq_p { struct dim_sample dim_sample; u64 rx_frames, rx_bytes; + u64 tx_frames, tx_bytes; rx_frames = OTX2_GET_RX_STATS(RX_BCAST) + OTX2_GET_RX_STATS(RX_MCAST) + OTX2_GET_RX_STATS(RX_UCAST); rx_bytes = OTX2_GET_RX_STATS(RX_OCTS); - dim_update_sample(pfvf->napi_events, rx_frames, rx_bytes, &dim_sample); + tx_bytes = OTX2_GET_TX_STATS(TX_OCTS); + tx_frames = OTX2_GET_TX_STATS(TX_UCAST); + + dim_update_sample(pfvf->napi_events, + rx_frames + tx_frames, + rx_bytes + tx_bytes, + &dim_sample); net_dim(&cq_poll->dim, dim_sample); } @@ -558,16 +565,9 @@ int otx2_napi_handler(struct napi_struct *napi, int budget) if (pfvf->flags & OTX2_FLAG_INTF_DOWN) return workdone; - /* Check for adaptive interrupt coalesce */ - if (workdone != 0 && - ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) == - OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) { - /* Adjust irq coalese using net_dim */ + /* Adjust irq coalese using net_dim */ + if (pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) otx2_adjust_adaptive_coalese(pfvf, cq_poll); - /* Update irq coalescing */ - for (i = 0; i < pfvf->hw.cint_cnt; i++) - otx2_config_irq_coalescing(pfvf, i); - } if (unlikely(!filled_cnt)) { struct refill_work *work; -- cgit v1.2.3 From 37e4b8df27bc68340f3fc80dbb27e3549c7f881c Mon Sep 17 00:00:00 2001 From: Jianheng Zhang Date: Fri, 1 Dec 2023 03:22:03 +0000 Subject: net: stmmac: fix FPE events losing The status bits of register MAC_FPE_CTRL_STS are clear on read. Using 32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt handler missing FPE event status and leads to FPE handshaking failure and retries. To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to cache the control bits of MAC_FPE_CTRL_STS and to avoid reading MAC_FPE_CTRL_STS in those methods. Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure") Reviewed-by: Serge Semin Signed-off-by: Jianheng Zhang Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 45 +++++++++------------- drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 4 +- .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 3 +- drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 +++- drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 1 + include/linux/stmmac.h | 1 + 7 files changed, 36 insertions(+), 30 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c index e95d35f1e5a0..8fd167501fa0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c @@ -710,28 +710,22 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev, } } -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, + u32 num_txq, u32 num_rxq, bool enable) { u32 value; - if (!enable) { - value = readl(ioaddr + MAC_FPE_CTRL_STS); - - value &= ~EFPE; - - writel(value, ioaddr + MAC_FPE_CTRL_STS); - return; + if (enable) { + cfg->fpe_csr = EFPE; + value = readl(ioaddr + GMAC_RXQ_CTRL1); + value &= ~GMAC_RXQCTRL_FPRQ; + value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT; + writel(value, ioaddr + GMAC_RXQ_CTRL1); + } else { + cfg->fpe_csr = 0; } - - value = readl(ioaddr + GMAC_RXQ_CTRL1); - value &= ~GMAC_RXQCTRL_FPRQ; - value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT; - writel(value, ioaddr + GMAC_RXQ_CTRL1); - - value = readl(ioaddr + MAC_FPE_CTRL_STS); - value |= EFPE; - writel(value, ioaddr + MAC_FPE_CTRL_STS); + writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS); } int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev) @@ -741,6 +735,9 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev) status = FPE_EVENT_UNKNOWN; + /* Reads from the MAC_FPE_CTRL_STS register should only be performed + * here, since the status flags of MAC_FPE_CTRL_STS are "clear on read" + */ value = readl(ioaddr + MAC_FPE_CTRL_STS); if (value & TRSP) { @@ -766,19 +763,15 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev) return status; } -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type) +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, + enum stmmac_mpacket_type type) { - u32 value; + u32 value = cfg->fpe_csr; - value = readl(ioaddr + MAC_FPE_CTRL_STS); - - if (type == MPACKET_VERIFY) { - value &= ~SRSP; + if (type == MPACKET_VERIFY) value |= SVER; - } else { - value &= ~SVER; + else if (type == MPACKET_RESPONSE) value |= SRSP; - } writel(value, ioaddr + MAC_FPE_CTRL_STS); } diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h index 53c138d0ff48..34e620790eb3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h @@ -153,9 +153,11 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg, unsigned int ptp_rate); void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev, struct stmmac_extra_stats *x, u32 txqcnt); -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, + u32 num_txq, u32 num_rxq, bool enable); void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, + struct stmmac_fpe_cfg *cfg, enum stmmac_mpacket_type type); int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index 453e88b75be0..a74e71db79f9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -1484,7 +1484,8 @@ static int dwxgmac3_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg, return 0; } -static void dwxgmac3_fpe_configure(void __iomem *ioaddr, u32 num_txq, +static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, + u32 num_txq, u32 num_rxq, bool enable) { u32 value; diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h index b95d3e137813..68aa2d5ca6e5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h @@ -412,9 +412,11 @@ struct stmmac_ops { unsigned int ptp_rate); void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev, struct stmmac_extra_stats *x, u32 txqcnt); - void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, + void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, + u32 num_txq, u32 num_rxq, bool enable); void (*fpe_send_mpacket)(void __iomem *ioaddr, + struct stmmac_fpe_cfg *cfg, enum stmmac_mpacket_type type); int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev); }; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 2afb2bd25977..37e64283f910 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up) bool *hs_enable = &fpe_cfg->hs_enable; if (is_up && *hs_enable) { - stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY); + stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg, + MPACKET_VERIFY); } else { *lo_state = FPE_STATE_OFF; *lp_state = FPE_STATE_OFF; @@ -5839,6 +5840,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status) /* If user has requested FPE enable, quickly response */ if (*hs_enable) stmmac_fpe_send_mpacket(priv, priv->ioaddr, + fpe_cfg, MPACKET_RESPONSE); } @@ -7263,6 +7265,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work) if (*lo_state == FPE_STATE_ENTERING_ON && *lp_state == FPE_STATE_ENTERING_ON) { stmmac_fpe_configure(priv, priv->ioaddr, + fpe_cfg, priv->plat->tx_queues_to_use, priv->plat->rx_queues_to_use, *enable); @@ -7281,6 +7284,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work) netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT, *lo_state, *lp_state); stmmac_fpe_send_mpacket(priv, priv->ioaddr, + fpe_cfg, MPACKET_VERIFY); } /* Sleep then retry */ @@ -7295,6 +7299,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable) if (priv->plat->fpe_cfg->hs_enable != enable) { if (enable) { stmmac_fpe_send_mpacket(priv, priv->ioaddr, + priv->plat->fpe_cfg, MPACKET_VERIFY); } else { priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF; @@ -7755,6 +7760,7 @@ int stmmac_suspend(struct device *dev) if (priv->dma_cap.fpesel) { /* Disable FPE */ stmmac_fpe_configure(priv, priv->ioaddr, + priv->plat->fpe_cfg, priv->plat->tx_queues_to_use, priv->plat->rx_queues_to_use, false); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c index ac41ef4cbd2f..6ad3e0a11936 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c @@ -1079,6 +1079,7 @@ disable: priv->plat->fpe_cfg->enable = false; stmmac_fpe_configure(priv, priv->ioaddr, + priv->plat->fpe_cfg, priv->plat->tx_queues_to_use, priv->plat->rx_queues_to_use, false); diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 0b4658a7eceb..dee5ad6e48c5 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg { bool hs_enable; /* FPE handshake enable */ enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */ enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */ + u32 fpe_csr; /* MAC_FPE_CTRL_STS reg cache */ }; struct stmmac_safety_feature_cfg { -- cgit v1.2.3 From 3c91c909f13f0c32b0d54d75c3f798479b1a84f5 Mon Sep 17 00:00:00 2001 From: Zhipeng Lu Date: Sat, 2 Dec 2023 17:59:02 +0800 Subject: octeontx2-af: fix a use-after-free in rvu_npa_register_reporters The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl) after the create_workqueue fails, and after that free, the rvu_dl will be translate back through rvu_npa_health_reporters_create, rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the err_dl_health label, being freed again in rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy. In the second calls of rvu_npa_health_reporters_destroy, however, it uses rvu_dl->rvu_npa_health_reporter, which is already freed at the end of rvu_npa_health_reporters_destroy in the first call. So this patch prevents the first destroy by instantly returning -ENONMEN when create_workqueue fails. In addition, since the failure of create_workqueue is the only entrence of label err, it has been integrated into the error-handling path of create_workqueue. Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA") Signed-off-by: Zhipeng Lu Acked-by: Paolo Abeni Acked-by: Geethasowjanya Akula Link: https://lore.kernel.org/r/20231202095902.3264863-1-alexious@zju.edu.cn Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c index c70932625d0d..62780d8b4f9a 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c @@ -1087,7 +1087,7 @@ static int rvu_npa_register_reporters(struct rvu_devlink *rvu_dl) rvu_dl->devlink_wq = create_workqueue("rvu_devlink_wq"); if (!rvu_dl->devlink_wq) - goto err; + return -ENOMEM; INIT_WORK(&rvu_reporters->intr_work, rvu_npa_intr_work); INIT_WORK(&rvu_reporters->err_work, rvu_npa_err_work); @@ -1095,9 +1095,6 @@ static int rvu_npa_register_reporters(struct rvu_devlink *rvu_dl) INIT_WORK(&rvu_reporters->ras_work, rvu_npa_ras_work); return 0; -err: - rvu_npa_health_reporters_destroy(rvu_dl); - return -ENOMEM; } static int rvu_npa_health_reporters_create(struct rvu_devlink *rvu_dl) -- cgit v1.2.3 From f8e9889f54da6e3146c2cb3f5c206cf1a704f9d3 Mon Sep 17 00:00:00 2001 From: Michal Swiatkowski Date: Tue, 24 Oct 2023 16:20:10 +0200 Subject: ice: change vfs.num_msix_per to vf->num_msix vfs::num_msix_per should be only used as default value for vf->num_msix. For other use cases vf->num_msix should be used, as VF can have different MSI-X amount values. Fix incorrect register index calculation. vfs::num_msix_per and pf->sriov_base_vector shouldn't be used after implementation of changing MSI-X amount on VFs. Instead vf->first_vector_idx should be used, as it is storing value for first irq index. Fixes: fe1c5ca2fe76 ("ice: implement num_msix field per VF") Reviewed-by: Jacob Keller Signed-off-by: Michal Swiatkowski Reviewed-by: Simon Horman Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_sriov.c | 7 +------ drivers/net/ethernet/intel/ice/ice_virtchnl.c | 5 ++--- 2 files changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ice/ice_sriov.c b/drivers/net/ethernet/intel/ice/ice_sriov.c index 2a5e6616cc0a..e1494f24f661 100644 --- a/drivers/net/ethernet/intel/ice/ice_sriov.c +++ b/drivers/net/ethernet/intel/ice/ice_sriov.c @@ -374,16 +374,11 @@ static void ice_ena_vf_mappings(struct ice_vf *vf) */ int ice_calc_vf_reg_idx(struct ice_vf *vf, struct ice_q_vector *q_vector) { - struct ice_pf *pf; - if (!vf || !q_vector) return -EINVAL; - pf = vf->pf; - /* always add one to account for the OICR being the first MSIX */ - return pf->sriov_base_vector + pf->vfs.num_msix_per * vf->vf_id + - q_vector->v_idx + 1; + return vf->first_vector_idx + q_vector->v_idx + 1; } /** diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl.c b/drivers/net/ethernet/intel/ice/ice_virtchnl.c index de11b3186bd7..1c7b4ded948b 100644 --- a/drivers/net/ethernet/intel/ice/ice_virtchnl.c +++ b/drivers/net/ethernet/intel/ice/ice_virtchnl.c @@ -1523,7 +1523,6 @@ static int ice_vc_cfg_irq_map_msg(struct ice_vf *vf, u8 *msg) u16 num_q_vectors_mapped, vsi_id, vector_id; struct virtchnl_irq_map_info *irqmap_info; struct virtchnl_vector_map *map; - struct ice_pf *pf = vf->pf; struct ice_vsi *vsi; int i; @@ -1535,7 +1534,7 @@ static int ice_vc_cfg_irq_map_msg(struct ice_vf *vf, u8 *msg) * there is actually at least a single VF queue vector mapped */ if (!test_bit(ICE_VF_STATE_ACTIVE, vf->vf_states) || - pf->vfs.num_msix_per < num_q_vectors_mapped || + vf->num_msix < num_q_vectors_mapped || !num_q_vectors_mapped) { v_ret = VIRTCHNL_STATUS_ERR_PARAM; goto error_param; @@ -1557,7 +1556,7 @@ static int ice_vc_cfg_irq_map_msg(struct ice_vf *vf, u8 *msg) /* vector_id is always 0-based for each VF, and can never be * larger than or equal to the max allowed interrupts per VF */ - if (!(vector_id < pf->vfs.num_msix_per) || + if (!(vector_id < vf->num_msix) || !ice_vc_isvalid_vsi_id(vf, vsi_id) || (!vector_id && (map->rxq_map || map->txq_map))) { v_ret = VIRTCHNL_STATUS_ERR_PARAM; -- cgit v1.2.3 From 4e7f0087b058cc3cab8f3c32141b51aa5457d298 Mon Sep 17 00:00:00 2001 From: Marcin Szycik Date: Tue, 7 Nov 2023 14:51:38 +0100 Subject: ice: Restore fix disabling RX VLAN filtering Fix setting dis_rx_filtering depending on whether port vlan is being turned on or off. This was originally fixed in commit c793f8ea15e3 ("ice: Fix disabling Rx VLAN filtering with port VLAN enabled"), but while refactoring ice_vf_vsi_init_vlan_ops(), the fix has been lost. Restore the fix along with the original comment from that change. Also delete duplicate lines in ice_port_vlan_on(). Fixes: 2946204b3fa8 ("ice: implement bridge port vlan") Reviewed-by: Wojciech Drewek Signed-off-by: Marcin Szycik Reviewed-by: Simon Horman Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_vf_vsi_vlan_ops.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ice/ice_vf_vsi_vlan_ops.c b/drivers/net/ethernet/intel/ice/ice_vf_vsi_vlan_ops.c index d7b10dc67f03..80dc4bcdd3a4 100644 --- a/drivers/net/ethernet/intel/ice/ice_vf_vsi_vlan_ops.c +++ b/drivers/net/ethernet/intel/ice/ice_vf_vsi_vlan_ops.c @@ -32,7 +32,6 @@ static void ice_port_vlan_on(struct ice_vsi *vsi) /* setup outer VLAN ops */ vlan_ops->set_port_vlan = ice_vsi_set_outer_port_vlan; vlan_ops->clear_port_vlan = ice_vsi_clear_outer_port_vlan; - vlan_ops->clear_port_vlan = ice_vsi_clear_outer_port_vlan; /* setup inner VLAN ops */ vlan_ops = &vsi->inner_vlan_ops; @@ -47,8 +46,13 @@ static void ice_port_vlan_on(struct ice_vsi *vsi) vlan_ops->set_port_vlan = ice_vsi_set_inner_port_vlan; vlan_ops->clear_port_vlan = ice_vsi_clear_inner_port_vlan; - vlan_ops->clear_port_vlan = ice_vsi_clear_inner_port_vlan; } + + /* all Rx traffic should be in the domain of the assigned port VLAN, + * so prevent disabling Rx VLAN filtering + */ + vlan_ops->dis_rx_filtering = noop_vlan; + vlan_ops->ena_rx_filtering = ice_vsi_ena_rx_vlan_filtering; } @@ -77,6 +81,8 @@ static void ice_port_vlan_off(struct ice_vsi *vsi) vlan_ops->del_vlan = ice_vsi_del_vlan; } + vlan_ops->dis_rx_filtering = ice_vsi_dis_rx_vlan_filtering; + if (!test_bit(ICE_FLAG_VF_VLAN_PRUNING, pf->flags)) vlan_ops->ena_rx_filtering = noop_vlan; else @@ -141,7 +147,6 @@ void ice_vf_vsi_init_vlan_ops(struct ice_vsi *vsi) &vsi->outer_vlan_ops : &vsi->inner_vlan_ops; vlan_ops->add_vlan = ice_vsi_add_vlan; - vlan_ops->dis_rx_filtering = ice_vsi_dis_rx_vlan_filtering; vlan_ops->ena_tx_filtering = ice_vsi_ena_tx_vlan_filtering; vlan_ops->dis_tx_filtering = ice_vsi_dis_tx_vlan_filtering; } -- cgit v1.2.3 From 7d9f22b3d3ef379ed05bd3f3e2de83dfa8da8258 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Fri, 10 Nov 2023 09:12:09 +0100 Subject: i40e: Fix unexpected MFS warning message Commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") added a warning message that reports unexpected size of port's MFS (max frame size) value. This message use for the port number local variable 'i' that is wrong. In i40e_probe() this 'i' variable is used only to iterate VSIs to find FDIR VSI: ... /* if FDIR VSI was set up, start it now */ for (i = 0; i < pf->num_alloc_vsi; i++) { if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) { i40e_vsi_open(pf->vsi[i]); break; } } ... So the warning message use for the port number index of FDIR VSI if this exists or pf->num_alloc_vsi if not. Fix the message by using 'pf->hw.port' for the port number. Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") Signed-off-by: Ivan Vecera Reviewed-by: Simon Horman Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index f7a332e51524..1ab8dbe2d880 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -16224,7 +16224,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) I40E_PRTGL_SAH_MFS_MASK) >> I40E_PRTGL_SAH_MFS_SHIFT; if (val < MAX_FRAME_SIZE_DEFAULT) dev_warn(&pdev->dev, "MFS for port %x has been set below the default: %x\n", - i, val); + pf->hw.port, val); /* Add a filter to drop all Flow control frames from any VSI from being * transmitted. By doing so we stop a malicious VF from sending out -- cgit v1.2.3 From a206d9959f5ccd0fb2d54a997c993947ae0e881c Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 27 Nov 2023 15:33:50 -0800 Subject: iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero In __iavf_set_coalesce, the driver checks both ec->rx_coalesce_usecs and ec->tx_coalesce_usecs for validity. It does this via a chain if if/else-if blocks. If every single branch of the series of if statements exited, this would be fine. However, the rx_coalesce_usecs is checked against zero to print an informative message if use_adaptive_rx_coalesce is enabled. If this check is true, it short circuits the entire chain of statements, preventing validation of the tx_coalesce_usecs field. Indeed, since commit e792779e6b63 ("iavf: Prevent changing static ITR values if adaptive moderation is on") the iavf driver actually rejects any change to the tx_coalesce_usecs or rx_coalesce_usecs when use_adaptive_tx_coalesce or use_adaptive_rx_coalesce is enabled, making this checking a bit redundant. Fix this error by removing the unnecessary and redundant checks for use_adaptive_rx_coalesce and use_adaptive_tx_coalesce. Since zero is a valid value, and since the tx_coalesce_usecs and rx_coalesce_usecs fields are already unsigned, remove the minimum value check. This allows assigning an ITR value ranging from 0-8160 as described by the printed message. Fixes: 65e87c0398f5 ("i40evf: support queue-specific settings for interrupt moderation") Signed-off-by: Jacob Keller Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 12 ++---------- drivers/net/ethernet/intel/iavf/iavf_txrx.h | 1 - 2 files changed, 2 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c index 6f236d1a6444..19cbfe554689 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c +++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c @@ -827,18 +827,10 @@ static int __iavf_set_coalesce(struct net_device *netdev, struct iavf_adapter *adapter = netdev_priv(netdev); int i; - if (ec->rx_coalesce_usecs == 0) { - if (ec->use_adaptive_rx_coalesce) - netif_info(adapter, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n"); - } else if ((ec->rx_coalesce_usecs < IAVF_MIN_ITR) || - (ec->rx_coalesce_usecs > IAVF_MAX_ITR)) { + if (ec->rx_coalesce_usecs > IAVF_MAX_ITR) { netif_info(adapter, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n"); return -EINVAL; - } else if (ec->tx_coalesce_usecs == 0) { - if (ec->use_adaptive_tx_coalesce) - netif_info(adapter, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n"); - } else if ((ec->tx_coalesce_usecs < IAVF_MIN_ITR) || - (ec->tx_coalesce_usecs > IAVF_MAX_ITR)) { + } else if (ec->tx_coalesce_usecs > IAVF_MAX_ITR) { netif_info(adapter, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n"); return -EINVAL; } diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.h b/drivers/net/ethernet/intel/iavf/iavf_txrx.h index 7e6ee32d19b6..10ba36602c0c 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_txrx.h +++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.h @@ -15,7 +15,6 @@ */ #define IAVF_ITR_DYNAMIC 0x8000 /* use top bit as a flag */ #define IAVF_ITR_MASK 0x1FFE /* mask for ITR register value */ -#define IAVF_MIN_ITR 2 /* reg uses 2 usec resolution */ #define IAVF_ITR_100K 10 /* all values below must be even */ #define IAVF_ITR_50K 20 #define IAVF_ITR_20K 50 -- cgit v1.2.3 From a61f46e1102545cf1fb5f19992288265362cefb0 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Mon, 4 Dec 2023 16:01:48 +0100 Subject: net: veth: fix packet segmentation in veth_convert_skb_to_xdp_buff Based on the previous allocated packet, page_offset can be not null in veth_convert_skb_to_xdp_buff routine. Take into account page fragment offset during the skb paged area copy in veth_convert_skb_to_xdp_buff(). Fixes: 2d0de67da51a ("net: veth: use newly added page pool API for veth with xdp") Signed-off-by: Lorenzo Bianconi Reviewed-by: Yunsheng Lin Link: https://lore.kernel.org/r/eddfe549e7e626870071930964ac3c38a1dc8068.1701702000.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/veth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 57efb3454c57..977861c46b1f 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -790,7 +790,8 @@ static int veth_convert_skb_to_xdp_buff(struct veth_rq *rq, skb_add_rx_frag(nskb, i, page, page_offset, size, truesize); - if (skb_copy_bits(skb, off, page_address(page), + if (skb_copy_bits(skb, off, + page_address(page) + page_offset, size)) { consume_skb(nskb); goto drop; -- cgit v1.2.3 From d007caaaf052f82ca2340d4c7b32d04a3f5dbf3f Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Mon, 4 Dec 2023 10:40:04 +0800 Subject: net: bnxt: fix a potential use-after-free in bnxt_init_tc When flow_indr_dev_register() fails, bnxt_init_tc will free bp->tc_info through kfree(). However, the caller function bnxt_init_one() will ignore this failure and call bnxt_shutdown_tc() on failure of bnxt_dl_register(), where a use-after-free happens. Fix this issue by setting bp->tc_info to NULL after kfree(). Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks") Signed-off-by: Dinghao Liu Reviewed-by: Pavan Chebbi Reviewed-by: Michael Chan Reviewed-by: Somnath Kotur Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c index 38d89d80b4a9..273c9ba48f09 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c @@ -2075,6 +2075,7 @@ destroy_flow_table: rhashtable_destroy(&tc_info->flow_table); free_tc_info: kfree(tc_info); + bp->tc_info = NULL; return rc; } -- cgit v1.2.3 From 0ceb3860a67652f9d36dfdecfcd2cb3eb2f4537d Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 4 Dec 2023 11:22:33 -0800 Subject: ionic: fix snprintf format length warning Our friendly kernel test robot has reminded us that with a new check we have a warning about a potential string truncation. In this case it really doesn't hurt anything, but it is worth addressing especially since there really is no reason to reserve so many bytes for our queue names. It seems that cutting the queue name buffer length in half stops the complaint. Fixes: c06107cabea3 ("ionic: more ionic name tweaks") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/ Signed-off-by: Shannon Nelson Reviewed-by: Brett Creeley Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20231204192234.21017-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/pensando/ionic/ionic_dev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_dev.h b/drivers/net/ethernet/pensando/ionic/ionic_dev.h index 1dbc3cb50b1d..9b5463040075 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_dev.h +++ b/drivers/net/ethernet/pensando/ionic/ionic_dev.h @@ -223,7 +223,7 @@ struct ionic_desc_info { void *cb_arg; }; -#define IONIC_QUEUE_NAME_MAX_SZ 32 +#define IONIC_QUEUE_NAME_MAX_SZ 16 struct ionic_queue { struct device *dev; -- cgit v1.2.3 From 4115ba677c35f694b62298e55f0e04ce84eed469 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Mon, 4 Dec 2023 11:22:34 -0800 Subject: ionic: Fix dim work handling in split interrupt mode Currently ionic_dim_work() is incorrect when in split interrupt mode. This is because the interrupt rate is only being changed for the Rx side even for dim running on Tx. Fix this by using the qcq from the container_of macro. Also, introduce some local variables for a bit of cleanup. Fixes: a6ff85e0a2d9 ("ionic: remove intr coalesce update from napi") Signed-off-by: Brett Creeley Signed-off-by: Shannon Nelson Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20231204192234.21017-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index edc14730ce88..bad919343180 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -49,24 +49,24 @@ static void ionic_lif_queue_identify(struct ionic_lif *lif); static void ionic_dim_work(struct work_struct *work) { struct dim *dim = container_of(work, struct dim, work); + struct ionic_intr_info *intr; struct dim_cq_moder cur_moder; struct ionic_qcq *qcq; + struct ionic_lif *lif; u32 new_coal; cur_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix); qcq = container_of(dim, struct ionic_qcq, dim); - new_coal = ionic_coal_usec_to_hw(qcq->q.lif->ionic, cur_moder.usec); + lif = qcq->q.lif; + new_coal = ionic_coal_usec_to_hw(lif->ionic, cur_moder.usec); new_coal = new_coal ? new_coal : 1; - if (qcq->intr.dim_coal_hw != new_coal) { - unsigned int qi = qcq->cq.bound_q->index; - struct ionic_lif *lif = qcq->q.lif; - - qcq->intr.dim_coal_hw = new_coal; + intr = &qcq->intr; + if (intr->dim_coal_hw != new_coal) { + intr->dim_coal_hw = new_coal; ionic_intr_coal_init(lif->ionic->idev.intr_ctrl, - lif->rxqcqs[qi]->intr.index, - qcq->intr.dim_coal_hw); + intr->index, intr->dim_coal_hw); } dim->state = DIM_START_MEASURE; -- cgit v1.2.3 From 7037d95a047cd89b1f680eed253c6ab586bef1ed Mon Sep 17 00:00:00 2001 From: Kelly Kane Date: Sat, 2 Dec 2023 17:17:12 -0800 Subject: r8152: add vendor/device ID pair for ASUS USB-C2500 The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Kelly Kane Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com Signed-off-by: Paolo Abeni --- drivers/net/usb/r8152.c | 1 + include/linux/usb/r8152.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index fcdc9ba0f826..9bf2140fd0a1 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -10049,6 +10049,7 @@ static const struct usb_device_id rtl8152_table[] = { { USB_DEVICE(VENDOR_ID_NVIDIA, 0x09ff) }, { USB_DEVICE(VENDOR_ID_TPLINK, 0x0601) }, { USB_DEVICE(VENDOR_ID_DLINK, 0xb301) }, + { USB_DEVICE(VENDOR_ID_ASUS, 0x1976) }, {} }; diff --git a/include/linux/usb/r8152.h b/include/linux/usb/r8152.h index 287e9d83fb8b..33a4c146dc19 100644 --- a/include/linux/usb/r8152.h +++ b/include/linux/usb/r8152.h @@ -30,6 +30,7 @@ #define VENDOR_ID_NVIDIA 0x0955 #define VENDOR_ID_TPLINK 0x2357 #define VENDOR_ID_DLINK 0x2001 +#define VENDOR_ID_ASUS 0x0b05 #if IS_REACHABLE(CONFIG_USB_RTL8152) extern u8 rtl8152_get_version(struct usb_interface *intf); -- cgit v1.2.3 From cbe860be36095e68e4e5561ab43610982fb429fd Mon Sep 17 00:00:00 2001 From: Daniil Maximov Date: Mon, 4 Dec 2023 11:58:10 +0300 Subject: net: atlantic: Fix NULL dereference of skb pointer in If is_ptp_ring == true in the loop of __aq_ring_xdp_clean function, then a timestamp is stored from a packet in a field of skb object, which is not allocated at the moment of the call (skb == NULL). Generalize aq_ptp_extract_ts and other affected functions so they don't work with struct sk_buff*, but with struct skb_shared_hwtstamps*. Found by Linux Verification Center (linuxtesting.org) with SVACE Fixes: 26efaef759a1 ("net: atlantic: Implement xdp data plane") Signed-off-by: Daniil Maximov Reviewed-by: Igor Russkikh Link: https://lore.kernel.org/r/20231204085810.1681386-1-daniil31415it@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/aquantia/atlantic/aq_ptp.c | 10 +++++----- drivers/net/ethernet/aquantia/atlantic/aq_ptp.h | 4 ++-- drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 18 ++++++++++++------ 3 files changed, 19 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c index 80b44043e6c5..28c9b6f1a54f 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c @@ -553,17 +553,17 @@ void aq_ptp_tx_hwtstamp(struct aq_nic_s *aq_nic, u64 timestamp) /* aq_ptp_rx_hwtstamp - utility function which checks for RX time stamp * @adapter: pointer to adapter struct - * @skb: particular skb to send timestamp with + * @shhwtstamps: particular skb_shared_hwtstamps to save timestamp * * if the timestamp is valid, we convert it into the timecounter ns * value, then store that result into the hwtstamps structure which * is passed up the network stack */ -static void aq_ptp_rx_hwtstamp(struct aq_ptp_s *aq_ptp, struct sk_buff *skb, +static void aq_ptp_rx_hwtstamp(struct aq_ptp_s *aq_ptp, struct skb_shared_hwtstamps *shhwtstamps, u64 timestamp) { timestamp -= atomic_read(&aq_ptp->offset_ingress); - aq_ptp_convert_to_hwtstamp(aq_ptp, skb_hwtstamps(skb), timestamp); + aq_ptp_convert_to_hwtstamp(aq_ptp, shhwtstamps, timestamp); } void aq_ptp_hwtstamp_config_get(struct aq_ptp_s *aq_ptp, @@ -639,7 +639,7 @@ bool aq_ptp_ring(struct aq_nic_s *aq_nic, struct aq_ring_s *ring) &aq_ptp->ptp_rx == ring || &aq_ptp->hwts_rx == ring; } -u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct sk_buff *skb, u8 *p, +u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct skb_shared_hwtstamps *shhwtstamps, u8 *p, unsigned int len) { struct aq_ptp_s *aq_ptp = aq_nic->aq_ptp; @@ -648,7 +648,7 @@ u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct sk_buff *skb, u8 *p, p, len, ×tamp); if (ret > 0) - aq_ptp_rx_hwtstamp(aq_ptp, skb, timestamp); + aq_ptp_rx_hwtstamp(aq_ptp, shhwtstamps, timestamp); return ret; } diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h index 28ccb7ca2df9..210b723f2207 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h @@ -67,7 +67,7 @@ int aq_ptp_hwtstamp_config_set(struct aq_ptp_s *aq_ptp, /* Return either ring is belong to PTP or not*/ bool aq_ptp_ring(struct aq_nic_s *aq_nic, struct aq_ring_s *ring); -u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct sk_buff *skb, u8 *p, +u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct skb_shared_hwtstamps *shhwtstamps, u8 *p, unsigned int len); struct ptp_clock *aq_ptp_get_ptp_clock(struct aq_ptp_s *aq_ptp); @@ -143,7 +143,7 @@ static inline bool aq_ptp_ring(struct aq_nic_s *aq_nic, struct aq_ring_s *ring) } static inline u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, - struct sk_buff *skb, u8 *p, + struct skb_shared_hwtstamps *shhwtstamps, u8 *p, unsigned int len) { return 0; diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c index 4de22eed099a..694daeaf3e61 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c @@ -647,7 +647,7 @@ static int __aq_ring_rx_clean(struct aq_ring_s *self, struct napi_struct *napi, } if (is_ptp_ring) buff->len -= - aq_ptp_extract_ts(self->aq_nic, skb, + aq_ptp_extract_ts(self->aq_nic, skb_hwtstamps(skb), aq_buf_vaddr(&buff->rxdata), buff->len); @@ -742,6 +742,8 @@ static int __aq_ring_xdp_clean(struct aq_ring_s *rx_ring, struct aq_ring_buff_s *buff = &rx_ring->buff_ring[rx_ring->sw_head]; bool is_ptp_ring = aq_ptp_ring(rx_ring->aq_nic, rx_ring); struct aq_ring_buff_s *buff_ = NULL; + u16 ptp_hwtstamp_len = 0; + struct skb_shared_hwtstamps shhwtstamps; struct sk_buff *skb = NULL; unsigned int next_ = 0U; struct xdp_buff xdp; @@ -810,11 +812,12 @@ static int __aq_ring_xdp_clean(struct aq_ring_s *rx_ring, hard_start = page_address(buff->rxdata.page) + buff->rxdata.pg_off - rx_ring->page_offset; - if (is_ptp_ring) - buff->len -= - aq_ptp_extract_ts(rx_ring->aq_nic, skb, - aq_buf_vaddr(&buff->rxdata), - buff->len); + if (is_ptp_ring) { + ptp_hwtstamp_len = aq_ptp_extract_ts(rx_ring->aq_nic, &shhwtstamps, + aq_buf_vaddr(&buff->rxdata), + buff->len); + buff->len -= ptp_hwtstamp_len; + } xdp_init_buff(&xdp, frame_sz, &rx_ring->xdp_rxq); xdp_prepare_buff(&xdp, hard_start, rx_ring->page_offset, @@ -834,6 +837,9 @@ static int __aq_ring_xdp_clean(struct aq_ring_s *rx_ring, if (IS_ERR(skb) || !skb) continue; + if (ptp_hwtstamp_len > 0) + *skb_hwtstamps(skb) = shhwtstamps; + if (buff->is_vlan) __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), buff->vlan_rx_tag); -- cgit v1.2.3 From 84757d0839451b20b11e993128f0a77393ca50c1 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Mon, 4 Dec 2023 22:32:31 +0800 Subject: net: hns: fix wrong head when modify the tx feature when sending packets Upon changing the tx feature, the hns driver will modify the maybe_stop_tx() and fill_desc() functions, if the modify happens during packet sending, will cause the hardware and software pointers do not match, and the port can not work anymore. This patch deletes the maybe_stop_tx() and fill_desc() functions modification when setting tx feature, and use the skb_is_gro() to determine which functions to use in the tx path. Fixes: 38f616da1c28 ("net:hns: Add support of ethtool TSO set option for Hip06 in HNS") Signed-off-by: Yonglong Liu Signed-off-by: Jijie Shao Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 53 ++++++++++++++++----------- drivers/net/ethernet/hisilicon/hns/hns_enet.h | 3 +- 2 files changed, 33 insertions(+), 23 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index 0900abf5c508..8a713eed4465 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -142,7 +142,8 @@ MODULE_DEVICE_TABLE(acpi, hns_enet_acpi_match); static void fill_desc(struct hnae_ring *ring, void *priv, int size, dma_addr_t dma, int frag_end, - int buf_num, enum hns_desc_type type, int mtu) + int buf_num, enum hns_desc_type type, int mtu, + bool is_gso) { struct hnae_desc *desc = &ring->desc[ring->next_to_use]; struct hnae_desc_cb *desc_cb = &ring->desc_cb[ring->next_to_use]; @@ -275,6 +276,15 @@ static int hns_nic_maybe_stop_tso( return 0; } +static int hns_nic_maybe_stop_tx_v2(struct sk_buff **out_skb, int *bnum, + struct hnae_ring *ring) +{ + if (skb_is_gso(*out_skb)) + return hns_nic_maybe_stop_tso(out_skb, bnum, ring); + else + return hns_nic_maybe_stop_tx(out_skb, bnum, ring); +} + static void fill_tso_desc(struct hnae_ring *ring, void *priv, int size, dma_addr_t dma, int frag_end, int buf_num, enum hns_desc_type type, int mtu) @@ -300,6 +310,19 @@ static void fill_tso_desc(struct hnae_ring *ring, void *priv, mtu); } +static void fill_desc_v2(struct hnae_ring *ring, void *priv, + int size, dma_addr_t dma, int frag_end, + int buf_num, enum hns_desc_type type, int mtu, + bool is_gso) +{ + if (is_gso) + fill_tso_desc(ring, priv, size, dma, frag_end, buf_num, type, + mtu); + else + fill_v2_desc(ring, priv, size, dma, frag_end, buf_num, type, + mtu); +} + netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev, struct sk_buff *skb, struct hns_nic_ring_data *ring_data) @@ -313,6 +336,7 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev, int seg_num; dma_addr_t dma; int size, next_to_use; + bool is_gso; int i; switch (priv->ops.maybe_stop_tx(&skb, &buf_num, ring)) { @@ -339,8 +363,9 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev, ring->stats.sw_err_cnt++; goto out_err_tx_ok; } + is_gso = skb_is_gso(skb); priv->ops.fill_desc(ring, skb, size, dma, seg_num == 1 ? 1 : 0, - buf_num, DESC_TYPE_SKB, ndev->mtu); + buf_num, DESC_TYPE_SKB, ndev->mtu, is_gso); /* fill the fragments */ for (i = 1; i < seg_num; i++) { @@ -354,7 +379,7 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev, } priv->ops.fill_desc(ring, skb_frag_page(frag), size, dma, seg_num - 1 == i ? 1 : 0, buf_num, - DESC_TYPE_PAGE, ndev->mtu); + DESC_TYPE_PAGE, ndev->mtu, is_gso); } /*complete translate all packets*/ @@ -1776,15 +1801,6 @@ static int hns_nic_set_features(struct net_device *netdev, netdev_info(netdev, "enet v1 do not support tso!\n"); break; default: - if (features & (NETIF_F_TSO | NETIF_F_TSO6)) { - priv->ops.fill_desc = fill_tso_desc; - priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tso; - /* The chip only support 7*4096 */ - netif_set_tso_max_size(netdev, 7 * 4096); - } else { - priv->ops.fill_desc = fill_v2_desc; - priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx; - } break; } netdev->features = features; @@ -2159,16 +2175,9 @@ static void hns_nic_set_priv_ops(struct net_device *netdev) priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx; } else { priv->ops.get_rxd_bnum = get_v2rx_desc_bnum; - if ((netdev->features & NETIF_F_TSO) || - (netdev->features & NETIF_F_TSO6)) { - priv->ops.fill_desc = fill_tso_desc; - priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tso; - /* This chip only support 7*4096 */ - netif_set_tso_max_size(netdev, 7 * 4096); - } else { - priv->ops.fill_desc = fill_v2_desc; - priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx; - } + priv->ops.fill_desc = fill_desc_v2; + priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx_v2; + netif_set_tso_max_size(netdev, 7 * 4096); /* enable tso when init * control tso on/off through TSE bit in bd */ diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.h b/drivers/net/ethernet/hisilicon/hns/hns_enet.h index ffa9d6573f54..3f3ee032f631 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.h @@ -44,7 +44,8 @@ struct hns_nic_ring_data { struct hns_nic_ops { void (*fill_desc)(struct hnae_ring *ring, void *priv, int size, dma_addr_t dma, int frag_end, - int buf_num, enum hns_desc_type type, int mtu); + int buf_num, enum hns_desc_type type, int mtu, + bool is_gso); int (*maybe_stop_tx)(struct sk_buff **out_skb, int *bnum, struct hnae_ring *ring); void (*get_rxd_bnum)(u32 bnum_flag, int *out_bnum); -- cgit v1.2.3 From f708aba40f9c1eeb9c7e93ed4863b5f85b09b288 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Mon, 4 Dec 2023 22:32:32 +0800 Subject: net: hns: fix fake link up on xge port If a xge port just connect with an optical module and no fiber, it may have a fake link up because there may be interference on the hardware. This patch adds an anti-shake to avoid the problem. And the time of anti-shake is base on tests. Fixes: b917078c1c10 ("net: hns: Add ACPI support to check SFP present") Signed-off-by: Yonglong Liu Signed-off-by: Jijie Shao Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 29 +++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c index 928d934cb21a..f75668c47935 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c @@ -66,6 +66,27 @@ static enum mac_mode hns_get_enet_interface(const struct hns_mac_cb *mac_cb) } } +static u32 hns_mac_link_anti_shake(struct mac_driver *mac_ctrl_drv) +{ +#define HNS_MAC_LINK_WAIT_TIME 5 +#define HNS_MAC_LINK_WAIT_CNT 40 + + u32 link_status = 0; + int i; + + if (!mac_ctrl_drv->get_link_status) + return link_status; + + for (i = 0; i < HNS_MAC_LINK_WAIT_CNT; i++) { + msleep(HNS_MAC_LINK_WAIT_TIME); + mac_ctrl_drv->get_link_status(mac_ctrl_drv, &link_status); + if (!link_status) + break; + } + + return link_status; +} + void hns_mac_get_link_status(struct hns_mac_cb *mac_cb, u32 *link_status) { struct mac_driver *mac_ctrl_drv; @@ -83,6 +104,14 @@ void hns_mac_get_link_status(struct hns_mac_cb *mac_cb, u32 *link_status) &sfp_prsnt); if (!ret) *link_status = *link_status && sfp_prsnt; + + /* for FIBER port, it may have a fake link up. + * when the link status changes from down to up, we need to do + * anti-shake. the anti-shake time is base on tests. + * only FIBER port need to do this. + */ + if (*link_status && !mac_cb->link) + *link_status = hns_mac_link_anti_shake(mac_ctrl_drv); } mac_cb->link = *link_status; -- cgit v1.2.3 From dca6fa8644b89f54345e55501b1419316ba5cb29 Mon Sep 17 00:00:00 2001 From: Nithin Dabilpuram Date: Tue, 5 Dec 2023 13:34:30 +0530 Subject: octeontx2-af: Adjust Tx credits when MCS external bypass is disabled When MCS external bypass is disabled, MCS returns additional 2 credits(32B) for every packet Tx'ed on LMAC. To account for these extra credits, NIX_AF_TX_LINKX_NORM_CREDIT.CC_MCS_CNT needs to be configured as otherwise NIX Tx credits would overflow and will never be returned to idle state credit count causing issues with credit control and MTU change. This patch fixes the same by configuring CC_MCS_CNT at probe time for MCS enabled SoC's Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by: Nithin Dabilpuram Signed-off-by: Geetha sowjanya Signed-off-by: Sunil Goutham Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/mcs.c | 14 +++++++++++++- drivers/net/ethernet/marvell/octeontx2/af/mcs.h | 2 ++ drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 1 + drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 8 ++++++++ drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h | 1 + 5 files changed, 25 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c index c43f19dfbd74..bd87507cf8ea 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c @@ -1219,6 +1219,17 @@ struct mcs *mcs_get_pdata(int mcs_id) return NULL; } +bool is_mcs_bypass(int mcs_id) +{ + struct mcs *mcs_dev; + + list_for_each_entry(mcs_dev, &mcs_list, mcs_list) { + if (mcs_dev->mcs_id == mcs_id) + return mcs_dev->bypass; + } + return true; +} + void mcs_set_port_cfg(struct mcs *mcs, struct mcs_port_cfg_set_req *req) { u64 val = 0; @@ -1436,7 +1447,7 @@ static int mcs_x2p_calibration(struct mcs *mcs) return err; } -static void mcs_set_external_bypass(struct mcs *mcs, u8 bypass) +static void mcs_set_external_bypass(struct mcs *mcs, bool bypass) { u64 val; @@ -1447,6 +1458,7 @@ static void mcs_set_external_bypass(struct mcs *mcs, u8 bypass) else val &= ~BIT_ULL(6); mcs_reg_write(mcs, MCSX_MIL_GLOBAL, val); + mcs->bypass = bypass; } static void mcs_global_cfg(struct mcs *mcs) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.h b/drivers/net/ethernet/marvell/octeontx2/af/mcs.h index 0f89dcb76465..f927cc61dfd2 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.h @@ -149,6 +149,7 @@ struct mcs { u16 num_vec; void *rvu; u16 *tx_sa_active; + bool bypass; }; struct mcs_ops { @@ -206,6 +207,7 @@ void mcs_get_custom_tag_cfg(struct mcs *mcs, struct mcs_custom_tag_cfg_get_req * int mcs_alloc_ctrlpktrule(struct rsrc_bmap *rsrc, u16 *pf_map, u16 offset, u16 pcifunc); int mcs_free_ctrlpktrule(struct mcs *mcs, struct mcs_free_ctrl_pkt_rule_req *req); int mcs_ctrlpktrule_write(struct mcs *mcs, struct mcs_ctrl_pkt_rule_write_req *req); +bool is_mcs_bypass(int mcs_id); /* CN10K-B APIs */ void cn10kb_mcs_set_hw_capabilities(struct mcs *mcs); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h index c4d999ef5ab4..cce2806aaa50 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h @@ -345,6 +345,7 @@ struct nix_hw { struct nix_txvlan txvlan; struct nix_ipolicer *ipolicer; u64 *tx_credits; + u8 cc_mcs_cnt; }; /* RVU block's capabilities or functionality, diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index c112c71ff576..4227ebb4a758 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -12,6 +12,7 @@ #include "rvu_reg.h" #include "rvu.h" #include "npc.h" +#include "mcs.h" #include "cgx.h" #include "lmac_common.h" #include "rvu_npc_hash.h" @@ -4389,6 +4390,12 @@ static void nix_link_config(struct rvu *rvu, int blkaddr, SDP_HW_MAX_FRS << 16 | NIC_HW_MIN_FRS); } + /* Get MCS external bypass status for CN10K-B */ + if (mcs_get_blkcnt() == 1) { + /* Adjust for 2 credits when external bypass is disabled */ + nix_hw->cc_mcs_cnt = is_mcs_bypass(0) ? 0 : 2; + } + /* Set credits for Tx links assuming max packet length allowed. * This will be reconfigured based on MTU set for PF/VF. */ @@ -4412,6 +4419,7 @@ static void nix_link_config(struct rvu *rvu, int blkaddr, tx_credits = (lmac_fifo_len - lmac_max_frs) / 16; /* Enable credits and set credit pkt count to max allowed */ cfg = (tx_credits << 12) | (0x1FF << 2) | BIT_ULL(1); + cfg |= FIELD_PREP(NIX_AF_LINKX_MCS_CNT_MASK, nix_hw->cc_mcs_cnt); link = iter + slink; nix_hw->tx_credits[link] = tx_credits; diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h index b42e631e52d0..18c1c9f361cc 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h @@ -437,6 +437,7 @@ #define NIX_AF_LINKX_BASE_MASK GENMASK_ULL(11, 0) #define NIX_AF_LINKX_RANGE_MASK GENMASK_ULL(19, 16) +#define NIX_AF_LINKX_MCS_CNT_MASK GENMASK_ULL(33, 32) /* SSO */ #define SSO_AF_CONST (0x1000) -- cgit v1.2.3 From 9723b2cca1f0e980c53156b52ea73b93966b3c8a Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Tue, 5 Dec 2023 13:34:31 +0530 Subject: octeontx2-af: Fix mcs sa cam entries size On latest silicon versions SA cam entries increased to 256. This patch fixes the datatype of sa_entries in mcs_hw_info struct to u16 to hold 256 entries. Fixes: 080bbd19c9dd ("octeontx2-af: cn10k: mcs: Add mailboxes for port related operations") Signed-off-by: Geetha sowjanya Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h index 6845556581c3..5df42634ceb8 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h @@ -1945,7 +1945,7 @@ struct mcs_hw_info { u8 tcam_entries; /* RX/TX Tcam entries per mcs block */ u8 secy_entries; /* RX/TX SECY entries per mcs block */ u8 sc_entries; /* RX/TX SC CAM entries per mcs block */ - u8 sa_entries; /* PN table entries = SA entries */ + u16 sa_entries; /* PN table entries = SA entries */ u64 rsvd[16]; }; -- cgit v1.2.3 From 3ba98a8c6f8ceb4e01a78f973d8d9017020bbd57 Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Tue, 5 Dec 2023 13:34:32 +0530 Subject: octeontx2-af: Fix mcs stats register address This patch adds the miss mcs stats register for mcs supported platforms. Fixes: 9312150af8da ("octeontx2-af: cn10k: mcs: Support for stats collection") Signed-off-by: Geetha sowjanya Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/mcs.c | 4 +-- .../net/ethernet/marvell/octeontx2/af/mcs_reg.h | 31 +++++++++++++++++++--- 2 files changed, 29 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c index bd87507cf8ea..c1775bd01c2b 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c @@ -117,7 +117,7 @@ void mcs_get_rx_secy_stats(struct mcs *mcs, struct mcs_secy_stats *stats, int id reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYTAGGEDCTLX(id); stats->pkt_tagged_ctl_cnt = mcs_reg_read(mcs, reg); - reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDORNOTAGX(id); + reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDX(id); stats->pkt_untaged_cnt = mcs_reg_read(mcs, reg); reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYCTLX(id); @@ -215,7 +215,7 @@ void mcs_get_sc_stats(struct mcs *mcs, struct mcs_sc_stats *stats, reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSCNOTVALIDX(id); stats->pkt_notvalid_cnt = mcs_reg_read(mcs, reg); - reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDOROKX(id); + reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDX(id); stats->pkt_unchecked_cnt = mcs_reg_read(mcs, reg); if (mcs->hw->mcs_blks > 1) { diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h index f3ab01fc363c..f4c6de89002c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h @@ -810,14 +810,37 @@ offset = 0x9d8ull; \ offset; }) +#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDX(a) ({ \ + u64 offset; \ + \ + offset = 0xee80ull; \ + if (mcs->hw->mcs_blks > 1) \ + offset = 0xe818ull; \ + offset += (a) * 0x8ull; \ + offset; }) + +#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDX(a) ({ \ + u64 offset; \ + \ + offset = 0xa680ull; \ + if (mcs->hw->mcs_blks > 1) \ + offset = 0xd018ull; \ + offset += (a) * 0x8ull; \ + offset; }) + +#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCLATEORDELAYEDX(a) ({ \ + u64 offset; \ + \ + offset = 0xf680ull; \ + if (mcs->hw->mcs_blks > 1) \ + offset = 0xe018ull; \ + offset += (a) * 0x8ull; \ + offset; }) + #define MCSX_CSE_RX_MEM_SLAVE_INOCTETSSCDECRYPTEDX(a) (0xe680ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INOCTETSSCVALIDATEX(a) (0xde80ull + (a) * 0x8ull) -#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDORNOTAGX(a) (0xa680ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYNOTAGX(a) (0xd218 + (a) * 0x8ull) -#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDX(a) (0xd018ull + (a) * 0x8ull) -#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDOROKX(a) (0xee80ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYCTLX(a) (0xb680ull + (a) * 0x8ull) -#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCLATEORDELAYEDX(a) (0xf680ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSAINVALIDX(a) (0x12680ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSANOTUSINGSAERRORX(a) (0x15680ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSANOTVALIDX(a) (0x13680ull + (a) * 0x8ull) -- cgit v1.2.3 From d431abd0a9aa27be379fb5f8304062071b0f5a7e Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Tue, 5 Dec 2023 13:34:33 +0530 Subject: octeontx2-af: Add missing mcs flr handler call If mcs resources are attached to PF/VF. These resources need to be freed on FLR. This patch add missing mcs flr call on PF FLR. Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by: Geetha sowjanya Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c index 22c395c7d040..731bb82b577c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c @@ -2631,6 +2631,9 @@ static void __rvu_flr_handler(struct rvu *rvu, u16 pcifunc) rvu_npc_free_mcam_entries(rvu, pcifunc, -1); rvu_mac_reset(rvu, pcifunc); + if (rvu->mcs_blk_cnt) + rvu_mcs_flr_handler(rvu, pcifunc); + mutex_unlock(&rvu->flr_lock); } -- cgit v1.2.3 From 7336fc196748f82646b630d5a2e9d283e200b988 Mon Sep 17 00:00:00 2001 From: Rahul Bhansali Date: Tue, 5 Dec 2023 13:34:34 +0530 Subject: octeontx2-af: Update Tx link register range On new silicons the TX channels for transmit level has increased. This patch fixes the respective register offset range to configure the newly added channels. Fixes: b279bbb3314e ("octeontx2-af: NIX Tx scheduler queue config support") Signed-off-by: Rahul Bhansali Signed-off-by: Geetha sowjanya Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c index b3150f053291..d46ac29adb96 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c @@ -31,8 +31,8 @@ static struct hw_reg_map txsch_reg_map[NIX_TXSCH_LVL_CNT] = { {NIX_TXSCH_LVL_TL4, 3, 0xFFFF, {{0x0B00, 0x0B08}, {0x0B10, 0x0B18}, {0x1200, 0x12E0} } }, {NIX_TXSCH_LVL_TL3, 4, 0xFFFF, {{0x1000, 0x10E0}, {0x1600, 0x1608}, - {0x1610, 0x1618}, {0x1700, 0x17B0} } }, - {NIX_TXSCH_LVL_TL2, 2, 0xFFFF, {{0x0E00, 0x0EE0}, {0x1700, 0x17B0} } }, + {0x1610, 0x1618}, {0x1700, 0x17C8} } }, + {NIX_TXSCH_LVL_TL2, 2, 0xFFFF, {{0x0E00, 0x0EE0}, {0x1700, 0x17C8} } }, {NIX_TXSCH_LVL_TL1, 1, 0xFFFF, {{0x0C00, 0x0D98} } }, }; -- cgit v1.2.3 From 0c7ed1f9197aecada33a08b022e484a97bf584ba Mon Sep 17 00:00:00 2001 From: Tobias Waldekranz Date: Tue, 5 Dec 2023 23:13:59 +0100 Subject: net: dsa: mv88e6xxx: Restore USXGMII support for 6393X In 4a56212774ac, USXGMII support was added for 6393X, but this was lost in the PCS conversion (the blamed commit), most likely because these efforts where more or less done in parallel. Restore this feature by porting Michal's patch to fit the new implementation. Reviewed-by: Florian Fainelli Tested-by: Michal Smulski Reviewed-by: Vladimir Oltean Fixes: e5b732a275f5 ("net: dsa: mv88e6xxx: convert 88e639x to phylink_pcs") Signed-off-by: Tobias Waldekranz Link: https://lore.kernel.org/r/20231205221359.3926018-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mv88e6xxx/pcs-639x.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/mv88e6xxx/pcs-639x.c b/drivers/net/dsa/mv88e6xxx/pcs-639x.c index 9a8429f5d09c..d758a6c1b226 100644 --- a/drivers/net/dsa/mv88e6xxx/pcs-639x.c +++ b/drivers/net/dsa/mv88e6xxx/pcs-639x.c @@ -465,6 +465,7 @@ mv88e639x_pcs_select(struct mv88e6xxx_chip *chip, int port, case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_XAUI: case PHY_INTERFACE_MODE_RXAUI: + case PHY_INTERFACE_MODE_USXGMII: return &mpcs->xg_pcs; default: @@ -873,7 +874,8 @@ static int mv88e6393x_xg_pcs_post_config(struct phylink_pcs *pcs, struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs); int err; - if (interface == PHY_INTERFACE_MODE_10GBASER) { + if (interface == PHY_INTERFACE_MODE_10GBASER || + interface == PHY_INTERFACE_MODE_USXGMII) { err = mv88e6393x_erratum_5_2(mpcs); if (err) return err; @@ -886,12 +888,37 @@ static int mv88e6393x_xg_pcs_post_config(struct phylink_pcs *pcs, return mv88e639x_xg_pcs_enable(mpcs); } +static void mv88e6393x_xg_pcs_get_state(struct phylink_pcs *pcs, + struct phylink_link_state *state) +{ + struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs); + u16 status, lp_status; + int err; + + if (state->interface != PHY_INTERFACE_MODE_USXGMII) + return mv88e639x_xg_pcs_get_state(pcs, state); + + state->link = false; + + err = mv88e639x_read(mpcs, MV88E6390_USXGMII_PHY_STATUS, &status); + err = err ? : mv88e639x_read(mpcs, MV88E6390_USXGMII_LP_STATUS, &lp_status); + if (err) { + dev_err(mpcs->mdio.dev.parent, + "can't read USXGMII status: %pe\n", ERR_PTR(err)); + return; + } + + state->link = !!(status & MDIO_USXGMII_LINK); + state->an_complete = state->link; + phylink_decode_usxgmii_word(state, lp_status); +} + static const struct phylink_pcs_ops mv88e6393x_xg_pcs_ops = { .pcs_enable = mv88e6393x_xg_pcs_enable, .pcs_disable = mv88e6393x_xg_pcs_disable, .pcs_pre_config = mv88e6393x_xg_pcs_pre_config, .pcs_post_config = mv88e6393x_xg_pcs_post_config, - .pcs_get_state = mv88e639x_xg_pcs_get_state, + .pcs_get_state = mv88e6393x_xg_pcs_get_state, .pcs_config = mv88e639x_xg_pcs_config, }; -- cgit v1.2.3 From 0ad722bd9ee3a9bdfca9613148645e4c9b7f26cf Mon Sep 17 00:00:00 2001 From: Hui Zhou Date: Tue, 5 Dec 2023 11:26:25 +0200 Subject: nfp: flower: fix for take a mutex lock in soft irq context and rcu lock The neighbour event callback call the function nfp_tun_write_neigh, this function will take a mutex lock and it is in soft irq context, change the work queue to process the neighbour event. Move the nfp_tun_write_neigh function out of range rcu_read_lock/unlock() in function nfp_tunnel_request_route_v4 and nfp_tunnel_request_route_v6. Fixes: abc210952af7 ("nfp: flower: tunnel neigh support bond offload") CC: stable@vger.kernel.org # 6.2+ Signed-off-by: Hui Zhou Signed-off-by: Louis Peens Signed-off-by: David S. Miller --- .../ethernet/netronome/nfp/flower/tunnel_conf.c | 127 +++++++++++++++------ 1 file changed, 95 insertions(+), 32 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c index 060a77f2265d..e522845c7c21 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c +++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c @@ -160,6 +160,18 @@ struct nfp_tun_mac_addr_offload { u8 addr[ETH_ALEN]; }; +/** + * struct nfp_neigh_update_work - update neighbour information to nfp + * @work: Work queue for writing neigh to the nfp + * @n: neighbour entry + * @app: Back pointer to app + */ +struct nfp_neigh_update_work { + struct work_struct work; + struct neighbour *n; + struct nfp_app *app; +}; + enum nfp_flower_mac_offload_cmd { NFP_TUNNEL_MAC_OFFLOAD_ADD = 0, NFP_TUNNEL_MAC_OFFLOAD_DEL = 1, @@ -607,38 +619,30 @@ err: nfp_flower_cmsg_warn(app, "Neighbour configuration failed.\n"); } -static int -nfp_tun_neigh_event_handler(struct notifier_block *nb, unsigned long event, - void *ptr) +static void +nfp_tun_release_neigh_update_work(struct nfp_neigh_update_work *update_work) { - struct nfp_flower_priv *app_priv; - struct netevent_redirect *redir; - struct neighbour *n; + neigh_release(update_work->n); + kfree(update_work); +} + +static void nfp_tun_neigh_update(struct work_struct *work) +{ + struct nfp_neigh_update_work *update_work; struct nfp_app *app; + struct neighbour *n; bool neigh_invalid; int err; - switch (event) { - case NETEVENT_REDIRECT: - redir = (struct netevent_redirect *)ptr; - n = redir->neigh; - break; - case NETEVENT_NEIGH_UPDATE: - n = (struct neighbour *)ptr; - break; - default: - return NOTIFY_DONE; - } - - neigh_invalid = !(n->nud_state & NUD_VALID) || n->dead; - - app_priv = container_of(nb, struct nfp_flower_priv, tun.neigh_nb); - app = app_priv->app; + update_work = container_of(work, struct nfp_neigh_update_work, work); + app = update_work->app; + n = update_work->n; if (!nfp_flower_get_port_id_from_netdev(app, n->dev)) - return NOTIFY_DONE; + goto out; #if IS_ENABLED(CONFIG_INET) + neigh_invalid = !(n->nud_state & NUD_VALID) || n->dead; if (n->tbl->family == AF_INET6) { #if IS_ENABLED(CONFIG_IPV6) struct flowi6 flow6 = {}; @@ -655,13 +659,11 @@ nfp_tun_neigh_event_handler(struct notifier_block *nb, unsigned long event, dst = ip6_dst_lookup_flow(dev_net(n->dev), NULL, &flow6, NULL); if (IS_ERR(dst)) - return NOTIFY_DONE; + goto out; dst_release(dst); } nfp_tun_write_neigh(n->dev, app, &flow6, n, true, false); -#else - return NOTIFY_DONE; #endif /* CONFIG_IPV6 */ } else { struct flowi4 flow4 = {}; @@ -678,17 +680,71 @@ nfp_tun_neigh_event_handler(struct notifier_block *nb, unsigned long event, rt = ip_route_output_key(dev_net(n->dev), &flow4); err = PTR_ERR_OR_ZERO(rt); if (err) - return NOTIFY_DONE; + goto out; ip_rt_put(rt); } nfp_tun_write_neigh(n->dev, app, &flow4, n, false, false); } -#else - return NOTIFY_DONE; #endif /* CONFIG_INET */ +out: + nfp_tun_release_neigh_update_work(update_work); +} - return NOTIFY_OK; +static struct nfp_neigh_update_work * +nfp_tun_alloc_neigh_update_work(struct nfp_app *app, struct neighbour *n) +{ + struct nfp_neigh_update_work *update_work; + + update_work = kzalloc(sizeof(*update_work), GFP_ATOMIC); + if (!update_work) + return NULL; + + INIT_WORK(&update_work->work, nfp_tun_neigh_update); + neigh_hold(n); + update_work->n = n; + update_work->app = app; + + return update_work; +} + +static int +nfp_tun_neigh_event_handler(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct nfp_neigh_update_work *update_work; + struct nfp_flower_priv *app_priv; + struct netevent_redirect *redir; + struct neighbour *n; + struct nfp_app *app; + + switch (event) { + case NETEVENT_REDIRECT: + redir = (struct netevent_redirect *)ptr; + n = redir->neigh; + break; + case NETEVENT_NEIGH_UPDATE: + n = (struct neighbour *)ptr; + break; + default: + return NOTIFY_DONE; + } +#if IS_ENABLED(CONFIG_IPV6) + if (n->tbl != ipv6_stub->nd_tbl && n->tbl != &arp_tbl) +#else + if (n->tbl != &arp_tbl) +#endif + return NOTIFY_DONE; + + app_priv = container_of(nb, struct nfp_flower_priv, tun.neigh_nb); + app = app_priv->app; + update_work = nfp_tun_alloc_neigh_update_work(app, n); + if (!update_work) + return NOTIFY_DONE; + + queue_work(system_highpri_wq, &update_work->work); + + return NOTIFY_DONE; } void nfp_tunnel_request_route_v4(struct nfp_app *app, struct sk_buff *skb) @@ -706,6 +762,7 @@ void nfp_tunnel_request_route_v4(struct nfp_app *app, struct sk_buff *skb) netdev = nfp_app_dev_get(app, be32_to_cpu(payload->ingress_port), NULL); if (!netdev) goto fail_rcu_unlock; + dev_hold(netdev); flow.daddr = payload->ipv4_addr; flow.flowi4_proto = IPPROTO_UDP; @@ -725,13 +782,16 @@ void nfp_tunnel_request_route_v4(struct nfp_app *app, struct sk_buff *skb) ip_rt_put(rt); if (!n) goto fail_rcu_unlock; + rcu_read_unlock(); + nfp_tun_write_neigh(n->dev, app, &flow, n, false, true); neigh_release(n); - rcu_read_unlock(); + dev_put(netdev); return; fail_rcu_unlock: rcu_read_unlock(); + dev_put(netdev); nfp_flower_cmsg_warn(app, "Requested route not found.\n"); } @@ -749,6 +809,7 @@ void nfp_tunnel_request_route_v6(struct nfp_app *app, struct sk_buff *skb) netdev = nfp_app_dev_get(app, be32_to_cpu(payload->ingress_port), NULL); if (!netdev) goto fail_rcu_unlock; + dev_hold(netdev); flow.daddr = payload->ipv6_addr; flow.flowi6_proto = IPPROTO_UDP; @@ -766,14 +827,16 @@ void nfp_tunnel_request_route_v6(struct nfp_app *app, struct sk_buff *skb) dst_release(dst); if (!n) goto fail_rcu_unlock; + rcu_read_unlock(); nfp_tun_write_neigh(n->dev, app, &flow, n, true, true); neigh_release(n); - rcu_read_unlock(); + dev_put(netdev); return; fail_rcu_unlock: rcu_read_unlock(); + dev_put(netdev); nfp_flower_cmsg_warn(app, "Requested IPv6 route not found.\n"); } -- cgit v1.2.3 From 1499b89289bf272fd83cb296c82fb5519d0fe93f Mon Sep 17 00:00:00 2001 From: Sean Nyekjaer Date: Wed, 6 Dec 2023 08:16:54 +0100 Subject: net: dsa: microchip: provide a list of valid protocols for xmit handler Provide a list of valid protocols for which the driver will provide it's deferred xmit handler. When using DSA_TAG_PROTO_KSZ8795 protocol, it does not provide a "connect" method, therefor ksz_connect() is not allocating ksz_tagger_data. This avoids the following null pointer dereference: ksz_connect_tag_protocol from dsa_register_switch+0x9ac/0xee0 dsa_register_switch from ksz_switch_register+0x65c/0x828 ksz_switch_register from ksz_spi_probe+0x11c/0x168 ksz_spi_probe from spi_probe+0x84/0xa8 spi_probe from really_probe+0xc8/0x2d8 Fixes: ab32f56a4100 ("net: dsa: microchip: ptp: add packet transmission timestamping") Signed-off-by: Sean Nyekjaer Reviewed-by: Florian Fainelli Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20231206071655.1626479-1-sean@geanix.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/microchip/ksz_common.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 3fed406fb46a..ff4b39601c93 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2713,10 +2713,18 @@ static int ksz_connect_tag_protocol(struct dsa_switch *ds, { struct ksz_tagger_data *tagger_data; - tagger_data = ksz_tagger_data(ds); - tagger_data->xmit_work_fn = ksz_port_deferred_xmit; - - return 0; + switch (proto) { + case DSA_TAG_PROTO_KSZ8795: + return 0; + case DSA_TAG_PROTO_KSZ9893: + case DSA_TAG_PROTO_KSZ9477: + case DSA_TAG_PROTO_LAN937X: + tagger_data = ksz_tagger_data(ds); + tagger_data->xmit_work_fn = ksz_port_deferred_xmit; + return 0; + default: + return -EPROTONOSUPPORT; + } } static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port, -- cgit v1.2.3