From 9899b81e7ca5c285b825ff10ca9357dd18813d83 Mon Sep 17 00:00:00 2001 From: Mike Sinkovsky Date: Wed, 4 Apr 2012 19:33:53 +0000 Subject: Ethernet driver for the WIZnet W5300 chip Based on original driver from chip manufacturer, but nearly full rewite. Tested and used in production with Blackfin BF531 embedded processor. Signed-off-by: Mike Sinkovsky Signed-off-by: David S. Miller --- include/linux/platform_data/wiznet.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/platform_data/wiznet.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/wiznet.h b/include/linux/platform_data/wiznet.h new file mode 100644 index 000000000000..b5d8c192d84d --- /dev/null +++ b/include/linux/platform_data/wiznet.h @@ -0,0 +1,24 @@ +/* + * Ethernet driver for the WIZnet W5x00 chip. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef PLATFORM_DATA_WIZNET_H +#define PLATFORM_DATA_WIZNET_H + +#include + +struct wiznet_platform_data { + int link_gpio; + u8 mac_addr[ETH_ALEN]; +}; + +#ifndef CONFIG_WIZNET_BUS_SHIFT +#define CONFIG_WIZNET_BUS_SHIFT 0 +#endif + +#define W5100_BUS_DIRECT_SIZE (0x8000 << CONFIG_WIZNET_BUS_SHIFT) +#define W5300_BUS_DIRECT_SIZE (0x0400 << CONFIG_WIZNET_BUS_SHIFT) + +#endif /* PLATFORM_DATA_WIZNET_H */ -- cgit v1.2.3 From 434103adea3f63f6550f4b2bd16653328f933a66 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 16 Mar 2012 16:06:07 -0600 Subject: usb: ehci-tegra: Add vbus_gpio to platform data Add a vbus_gpio field to platform data. This mirrors the device tree property nvidia,vbus-gpio. This makes the VBUS GPIO handling identical between booting with board files and device tree; the driver always does it. This removes the need for board files to request and initialize the GPIO early during their boot process, perhaps even before the GPIO driver is ready to process the request. Cc: Greg Kroah-Hartman Cc: Alan Stern Cc: linux-usb@vger.kernel.org Signed-off-by: Stephen Warren Acked-by: Olof Johansson --- arch/arm/mach-tegra/devices.c | 3 +++ drivers/usb/host/ehci-tegra.c | 13 +++++++------ include/linux/platform_data/tegra_usb.h | 1 + 3 files changed, 11 insertions(+), 6 deletions(-) (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c index 5f6b867e20b4..748b40cb7fcf 100644 --- a/arch/arm/mach-tegra/devices.c +++ b/arch/arm/mach-tegra/devices.c @@ -448,17 +448,20 @@ static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = { struct tegra_ehci_platform_data tegra_ehci1_pdata = { .operating_mode = TEGRA_USB_OTG, .power_down_on_bus_suspend = 1, + .vbus_gpio = -1, }; struct tegra_ehci_platform_data tegra_ehci2_pdata = { .phy_config = &tegra_ehci2_ulpi_phy_config, .operating_mode = TEGRA_USB_HOST, .power_down_on_bus_suspend = 1, + .vbus_gpio = -1, }; struct tegra_ehci_platform_data tegra_ehci3_pdata = { .operating_mode = TEGRA_USB_HOST, .power_down_on_bus_suspend = 1, + .vbus_gpio = -1, }; static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32); diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 73544bd440bd..9692bef159f5 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -581,15 +581,16 @@ static const struct hc_driver tegra_ehci_hc_driver = { .port_handed_over = ehci_port_handed_over, }; -static int setup_vbus_gpio(struct platform_device *pdev) +static int setup_vbus_gpio(struct platform_device *pdev, + struct tegra_ehci_platform_data *pdata) { int err = 0; int gpio; - if (!pdev->dev.of_node) - return 0; - - gpio = of_get_named_gpio(pdev->dev.of_node, "nvidia,vbus-gpio", 0); + gpio = pdata->vbus_gpio; + if (!gpio_is_valid(gpio)) + gpio = of_get_named_gpio(pdev->dev.of_node, + "nvidia,vbus-gpio", 0); if (!gpio_is_valid(gpio)) return 0; @@ -633,7 +634,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &tegra_ehci_dma_mask; - setup_vbus_gpio(pdev); + setup_vbus_gpio(pdev, pdata); tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL); if (!tegra) diff --git a/include/linux/platform_data/tegra_usb.h b/include/linux/platform_data/tegra_usb.h index 6bca5b569acb..66c673fef408 100644 --- a/include/linux/platform_data/tegra_usb.h +++ b/include/linux/platform_data/tegra_usb.h @@ -26,6 +26,7 @@ struct tegra_ehci_platform_data { /* power down the phy on bus suspend */ int power_down_on_bus_suspend; void *phy_config; + int vbus_gpio; }; #endif /* _TEGRA_USB_H_ */ -- cgit v1.2.3 From 3e0c70d050c7ed6d163897a6ac894f063c31b10f Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 12 Apr 2012 15:48:49 +0900 Subject: usb: ehci-sh: Add PHY init function with platform data In devices using ehci-sh, initialization of the PHY may be necessary. This adds platform data to ehci-sh and provide function to initialize PHY. Signed-off-by: Nobuhiro Iwamatsu CC: Shimoda, Yoshihiro Acked-by: Paul Mundt Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sh.c | 8 ++++++++ include/linux/platform_data/ehci-sh.h | 28 ++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) create mode 100644 include/linux/platform_data/ehci-sh.h (limited to 'include/linux/platform_data') diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 9d9cf47d80da..ca819cdd0c5e 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -11,6 +11,7 @@ */ #include #include +#include struct ehci_sh_priv { struct clk *iclk, *fclk; @@ -100,6 +101,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) const struct hc_driver *driver = &ehci_sh_hc_driver; struct resource *res; struct ehci_sh_priv *priv; + struct ehci_sh_platdata *pdata; struct usb_hcd *hcd; int irq, ret; @@ -124,6 +126,9 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) goto fail_create_hcd; } + if (pdev->dev.platform_data != NULL) + pdata = pdev->dev.platform_data; + /* initialize hcd */ hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev, dev_name(&pdev->dev)); @@ -168,6 +173,9 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) clk_enable(priv->fclk); clk_enable(priv->iclk); + if (pdata && pdata->phy_init) + pdata->phy_init(); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret != 0) { dev_err(&pdev->dev, "Failed to add hcd"); diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h new file mode 100644 index 000000000000..5c15a738e116 --- /dev/null +++ b/include/linux/platform_data/ehci-sh.h @@ -0,0 +1,28 @@ +/* + * EHCI SuperH driver platform data + * + * Copyright (C) 2012 Nobuhiro Iwamatsu + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __USB_EHCI_SH_H +#define __USB_EHCI_SH_H + +struct ehci_sh_platdata { + void (*phy_init)(void); /* Phy init function */ +}; + +#endif /* __USB_EHCI_SH_H */ -- cgit v1.2.3 From 7ec944538dde3d7f490bd4d2619051789db5c3c3 Mon Sep 17 00:00:00 2001 From: Aneesh V Date: Fri, 27 Apr 2012 17:54:05 +0530 Subject: memory: emif: add basic infrastructure for EMIF driver EMIF is an SDRAM controller used in various Texas Instruments SoCs. EMIF supports, based on its revision, one or more of LPDDR2/DDR2/DDR3 protocols. Add the basic infrastructure for EMIF driver that includes driver registration, probe, parsing of platform data etc. Signed-off-by: Aneesh V Reviewed-by: Santosh Shilimkar Reviewed-by: Benoit Cousson [santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc] Signed-off-by: Santosh Shilimkar Tested-by: Lokesh Vutla Signed-off-by: Greg Kroah-Hartman --- Documentation/memory-devices/ti-emif.txt | 57 ++++++ drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/memory/Kconfig | 22 +++ drivers/memory/Makefile | 5 + drivers/memory/emif.c | 289 +++++++++++++++++++++++++++++++ drivers/memory/emif.h | 7 + include/linux/platform_data/emif_plat.h | 128 ++++++++++++++ 8 files changed, 511 insertions(+) create mode 100644 Documentation/memory-devices/ti-emif.txt create mode 100644 drivers/memory/Kconfig create mode 100644 drivers/memory/Makefile create mode 100644 drivers/memory/emif.c create mode 100644 include/linux/platform_data/emif_plat.h (limited to 'include/linux/platform_data') diff --git a/Documentation/memory-devices/ti-emif.txt b/Documentation/memory-devices/ti-emif.txt new file mode 100644 index 000000000000..f4ad9a7d0f4b --- /dev/null +++ b/Documentation/memory-devices/ti-emif.txt @@ -0,0 +1,57 @@ +TI EMIF SDRAM Controller Driver: + +Author +======== +Aneesh V + +Location +============ +driver/memory/emif.c + +Supported SoCs: +=================== +TI OMAP44xx +TI OMAP54xx + +Menuconfig option: +========================== +Device Drivers + Memory devices + Texas Instruments EMIF driver + +Description +=========== +This driver is for the EMIF module available in Texas Instruments +SoCs. EMIF is an SDRAM controller that, based on its revision, +supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols. +This driver takes care of only LPDDR2 memories presently. The +functions of the driver includes re-configuring AC timing +parameters and other settings during frequency, voltage and +temperature changes + +Platform Data (see include/linux/platform_data/emif_plat.h): +===================================================================== +DDR device details and other board dependent and SoC dependent +information can be passed through platform data (struct emif_platform_data) +- DDR device details: 'struct ddr_device_info' +- Device AC timings: 'struct lpddr2_timings' and 'struct lpddr2_min_tck' +- Custom configurations: customizable policy options through + 'struct emif_custom_configs' +- IP revision +- PHY type + +Interface to the external world: +================================ +EMIF driver registers notifiers for voltage and frequency changes +affecting EMIF and takes appropriate actions when these are invoked. +- freq_pre_notify_handling() +- freq_post_notify_handling() +- volt_notify_handling() + +Debugfs +======== +The driver creates two debugfs entries per device. +- regcache_dump : dump of register values calculated and saved for all + frequencies used so far. +- mr4 : last polled value of MR4 register in the LPDDR2 device. MR4 + indicates the current temperature level of the device. diff --git a/drivers/Kconfig b/drivers/Kconfig index 0233ad979b7d..63b81826cb55 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -142,4 +142,6 @@ source "drivers/devfreq/Kconfig" source "drivers/extcon/Kconfig" +source "drivers/memory/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index c41dfa92cd79..265b506a15be 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -135,3 +135,4 @@ obj-$(CONFIG_HYPERV) += hv/ obj-$(CONFIG_PM_DEVFREQ) += devfreq/ obj-$(CONFIG_EXTCON) += extcon/ +obj-$(CONFIG_MEMORY) += memory/ diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig new file mode 100644 index 000000000000..b08327cca0e5 --- /dev/null +++ b/drivers/memory/Kconfig @@ -0,0 +1,22 @@ +# +# Memory devices +# + +menuconfig MEMORY + bool "Memory Controller drivers" + +if MEMORY + +config TI_EMIF + tristate "Texas Instruments EMIF driver" + select DDR + help + This driver is for the EMIF module available in Texas Instruments + SoCs. EMIF is an SDRAM controller that, based on its revision, + supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols. + This driver takes care of only LPDDR2 memories presently. The + functions of the driver includes re-configuring AC timing + parameters and other settings during frequency, voltage and + temperature changes + +endif diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile new file mode 100644 index 000000000000..e27f80b28859 --- /dev/null +++ b/drivers/memory/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for memory devices +# + +obj-$(CONFIG_TI_EMIF) += emif.o diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c new file mode 100644 index 000000000000..7486d7ef0826 --- /dev/null +++ b/drivers/memory/emif.c @@ -0,0 +1,289 @@ +/* + * EMIF driver + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * Aneesh V + * Santosh Shilimkar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "emif.h" + +/** + * struct emif_data - Per device static data for driver's use + * @duplicate: Whether the DDR devices attached to this EMIF + * instance are exactly same as that on EMIF1. In + * this case we can save some memory and processing + * @temperature_level: Maximum temperature of LPDDR2 devices attached + * to this EMIF - read from MR4 register. If there + * are two devices attached to this EMIF, this + * value is the maximum of the two temperature + * levels. + * @node: node in the device list + * @base: base address of memory-mapped IO registers. + * @dev: device pointer. + * @plat_data: Pointer to saved platform data. + */ +struct emif_data { + u8 duplicate; + u8 temperature_level; + struct list_head node; + void __iomem *base; + struct device *dev; + struct emif_platform_data *plat_data; +}; + +static struct emif_data *emif1; +static LIST_HEAD(device_list); + +static void get_default_timings(struct emif_data *emif) +{ + struct emif_platform_data *pd = emif->plat_data; + + pd->timings = lpddr2_jedec_timings; + pd->timings_arr_size = ARRAY_SIZE(lpddr2_jedec_timings); + + dev_warn(emif->dev, "%s: using default timings\n", __func__); +} + +static int is_dev_data_valid(u32 type, u32 density, u32 io_width, u32 phy_type, + u32 ip_rev, struct device *dev) +{ + int valid; + + valid = (type == DDR_TYPE_LPDDR2_S4 || + type == DDR_TYPE_LPDDR2_S2) + && (density >= DDR_DENSITY_64Mb + && density <= DDR_DENSITY_8Gb) + && (io_width >= DDR_IO_WIDTH_8 + && io_width <= DDR_IO_WIDTH_32); + + /* Combinations of EMIF and PHY revisions that we support today */ + switch (ip_rev) { + case EMIF_4D: + valid = valid && (phy_type == EMIF_PHY_TYPE_ATTILAPHY); + break; + case EMIF_4D5: + valid = valid && (phy_type == EMIF_PHY_TYPE_INTELLIPHY); + break; + default: + valid = 0; + } + + if (!valid) + dev_err(dev, "%s: invalid DDR details\n", __func__); + return valid; +} + +static int is_custom_config_valid(struct emif_custom_configs *cust_cfgs, + struct device *dev) +{ + int valid = 1; + + if ((cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE) && + (cust_cfgs->lpmode != EMIF_LP_MODE_DISABLE)) + valid = cust_cfgs->lpmode_freq_threshold && + cust_cfgs->lpmode_timeout_performance && + cust_cfgs->lpmode_timeout_power; + + if (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL) + valid = valid && cust_cfgs->temp_alert_poll_interval_ms; + + if (!valid) + dev_warn(dev, "%s: invalid custom configs\n", __func__); + + return valid; +} + +static struct emif_data *__init_or_module get_device_details( + struct platform_device *pdev) +{ + u32 size; + struct emif_data *emif = NULL; + struct ddr_device_info *dev_info; + struct emif_custom_configs *cust_cfgs; + struct emif_platform_data *pd; + struct device *dev; + void *temp; + + pd = pdev->dev.platform_data; + dev = &pdev->dev; + + if (!(pd && pd->device_info && is_dev_data_valid(pd->device_info->type, + pd->device_info->density, pd->device_info->io_width, + pd->phy_type, pd->ip_rev, dev))) { + dev_err(dev, "%s: invalid device data\n", __func__); + goto error; + } + + emif = devm_kzalloc(dev, sizeof(*emif), GFP_KERNEL); + temp = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); + dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL); + + if (!emif || !pd || !dev_info) { + dev_err(dev, "%s:%d: allocation error\n", __func__, __LINE__); + goto error; + } + + memcpy(temp, pd, sizeof(*pd)); + pd = temp; + memcpy(dev_info, pd->device_info, sizeof(*dev_info)); + + pd->device_info = dev_info; + emif->plat_data = pd; + emif->dev = dev; + emif->temperature_level = SDRAM_TEMP_NOMINAL; + + /* + * For EMIF instances other than EMIF1 see if the devices connected + * are exactly same as on EMIF1(which is typically the case). If so, + * mark it as a duplicate of EMIF1 and skip copying timings data. + * This will save some memory and some computation later. + */ + emif->duplicate = emif1 && (memcmp(dev_info, + emif1->plat_data->device_info, + sizeof(struct ddr_device_info)) == 0); + + if (emif->duplicate) { + pd->timings = NULL; + pd->min_tck = NULL; + goto out; + } else if (emif1) { + dev_warn(emif->dev, "%s: Non-symmetric DDR geometry\n", + __func__); + } + + /* + * Copy custom configs - ignore allocation error, if any, as + * custom_configs is not very critical + */ + cust_cfgs = pd->custom_configs; + if (cust_cfgs && is_custom_config_valid(cust_cfgs, dev)) { + temp = devm_kzalloc(dev, sizeof(*cust_cfgs), GFP_KERNEL); + if (temp) + memcpy(temp, cust_cfgs, sizeof(*cust_cfgs)); + else + dev_warn(dev, "%s:%d: allocation error\n", __func__, + __LINE__); + pd->custom_configs = temp; + } + + /* + * Copy timings and min-tck values from platform data. If it is not + * available or if memory allocation fails, use JEDEC defaults + */ + size = sizeof(struct lpddr2_timings) * pd->timings_arr_size; + if (pd->timings) { + temp = devm_kzalloc(dev, size, GFP_KERNEL); + if (temp) { + memcpy(temp, pd->timings, sizeof(*pd->timings)); + pd->timings = temp; + } else { + dev_warn(dev, "%s:%d: allocation error\n", __func__, + __LINE__); + get_default_timings(emif); + } + } else { + get_default_timings(emif); + } + + if (pd->min_tck) { + temp = devm_kzalloc(dev, sizeof(*pd->min_tck), GFP_KERNEL); + if (temp) { + memcpy(temp, pd->min_tck, sizeof(*pd->min_tck)); + pd->min_tck = temp; + } else { + dev_warn(dev, "%s:%d: allocation error\n", __func__, + __LINE__); + pd->min_tck = &lpddr2_jedec_min_tck; + } + } else { + pd->min_tck = &lpddr2_jedec_min_tck; + } + +out: + return emif; + +error: + return NULL; +} + +static int __init_or_module emif_probe(struct platform_device *pdev) +{ + struct emif_data *emif; + struct resource *res; + + emif = get_device_details(pdev); + if (!emif) { + pr_err("%s: error getting device data\n", __func__); + goto error; + } + + if (!emif1) + emif1 = emif; + + list_add(&emif->node, &device_list); + + /* Save pointers to each other in emif and device structures */ + emif->dev = &pdev->dev; + platform_set_drvdata(pdev, emif); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(emif->dev, "%s: error getting memory resource\n", + __func__); + goto error; + } + + emif->base = devm_request_and_ioremap(emif->dev, res); + if (!emif->base) { + dev_err(emif->dev, "%s: devm_request_and_ioremap() failed\n", + __func__); + goto error; + } + + dev_info(&pdev->dev, "%s: device configured with addr = %p\n", + __func__, emif->base); + + return 0; +error: + return -ENODEV; +} + +static struct platform_driver emif_driver = { + .driver = { + .name = "emif", + }, +}; + +static int __init_or_module emif_register(void) +{ + return platform_driver_probe(&emif_driver, emif_probe); +} + +static void __exit emif_unregister(void) +{ + platform_driver_unregister(&emif_driver); +} + +module_init(emif_register); +module_exit(emif_unregister); +MODULE_DESCRIPTION("TI EMIF SDRAM Controller Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:emif"); +MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/drivers/memory/emif.h b/drivers/memory/emif.h index 44b97dfe95b4..692b2a864e7b 100644 --- a/drivers/memory/emif.h +++ b/drivers/memory/emif.h @@ -12,6 +12,13 @@ #ifndef __EMIF_H #define __EMIF_H +/* + * Maximum number of different frequencies supported by EMIF driver + * Determines the number of entries in the pointer array for register + * cache + */ +#define EMIF_MAX_NUM_FREQUENCIES 6 + /* Registers offset */ #define EMIF_MODULE_ID_AND_REVISION 0x0000 #define EMIF_STATUS 0x0004 diff --git a/include/linux/platform_data/emif_plat.h b/include/linux/platform_data/emif_plat.h new file mode 100644 index 000000000000..03378ca84061 --- /dev/null +++ b/include/linux/platform_data/emif_plat.h @@ -0,0 +1,128 @@ +/* + * Definitions for TI EMIF device platform data + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * Aneesh V + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __EMIF_PLAT_H +#define __EMIF_PLAT_H + +/* Low power modes - EMIF_PWR_MGMT_CTRL */ +#define EMIF_LP_MODE_DISABLE 0 +#define EMIF_LP_MODE_CLOCK_STOP 1 +#define EMIF_LP_MODE_SELF_REFRESH 2 +#define EMIF_LP_MODE_PWR_DN 4 + +/* Hardware capabilities */ +#define EMIF_HW_CAPS_LL_INTERFACE 0x00000001 + +/* + * EMIF IP Revisions + * EMIF4D - Used in OMAP4 + * EMIF4D5 - Used in OMAP5 + */ +#define EMIF_4D 1 +#define EMIF_4D5 2 + +/* + * PHY types + * ATTILAPHY - Used in OMAP4 + * INTELLIPHY - Used in OMAP5 + */ +#define EMIF_PHY_TYPE_ATTILAPHY 1 +#define EMIF_PHY_TYPE_INTELLIPHY 2 + +/* Custom config requests */ +#define EMIF_CUSTOM_CONFIG_LPMODE 0x00000001 +#define EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL 0x00000002 + +#ifndef __ASSEMBLY__ +/** + * struct ddr_device_info - All information about the DDR device except AC + * timing parameters + * @type: Device type (LPDDR2-S4, LPDDR2-S2 etc) + * @density: Device density + * @io_width: Bus width + * @cs1_used: Whether there is a DDR device attached to the second + * chip-select(CS1) of this EMIF instance + * @cal_resistors_per_cs: Whether there is one calibration resistor per + * chip-select or whether it's a single one for both + * @manufacturer: Manufacturer name string + */ +struct ddr_device_info { + u32 type; + u32 density; + u32 io_width; + u32 cs1_used; + u32 cal_resistors_per_cs; + char manufacturer[10]; +}; + +/** + * struct emif_custom_configs - Custom configuration parameters/policies + * passed from the platform layer + * @mask: Mask to indicate which configs are requested + * @lpmode: LPMODE to be used in PWR_MGMT_CTRL register + * @lpmode_timeout_performance: Timeout before LPMODE entry when higher + * performance is desired at the cost of power (typically + * at higher OPPs) + * @lpmode_timeout_power: Timeout before LPMODE entry when better power + * savings is desired and performance is not important + * (typically at lower loads indicated by lower OPPs) + * @lpmode_freq_threshold: The DDR frequency threshold to identify between + * the above two cases: + * timeout = (freq >= lpmode_freq_threshold) ? + * lpmode_timeout_performance : + * lpmode_timeout_power; + * @temp_alert_poll_interval_ms: LPDDR2 MR4 polling interval at nominal + * temperature(in milliseconds). When temperature is high + * polling is done 4 times as frequently. + */ +struct emif_custom_configs { + u32 mask; + u32 lpmode; + u32 lpmode_timeout_performance; + u32 lpmode_timeout_power; + u32 lpmode_freq_threshold; + u32 temp_alert_poll_interval_ms; +}; + +/** + * struct emif_platform_data - Platform data passed on EMIF platform + * device creation. Used by the driver. + * @hw_caps: Hw capabilities of the EMIF IP in the respective SoC + * @device_info: Device info structure containing information such + * as type, bus width, density etc + * @timings: Timings information from device datasheet passed + * as an array of 'struct lpddr2_timings'. Can be NULL + * if if default timings are ok + * @timings_arr_size: Size of the timings array. Depends on the number + * of different frequencies for which timings data + * is provided + * @min_tck: Minimum value of some timing parameters in terms + * of number of cycles. Can be NULL if default values + * are ok + * @custom_configs: Custom configurations requested by SoC or board + * code and the data for them. Can be NULL if default + * configurations done by the driver are ok. See + * documentation for 'struct emif_custom_configs' for + * more details + */ +struct emif_platform_data { + u32 hw_caps; + struct ddr_device_info *device_info; + const struct lpddr2_timings *timings; + u32 timings_arr_size; + const struct lpddr2_min_tck *min_tck; + struct emif_custom_configs *custom_configs; + u32 ip_rev; + u32 phy_type; +}; +#endif /* __ASSEMBLY__ */ + +#endif /* __LINUX_EMIF_H */ -- cgit v1.2.3 From 127d42ae47703fe7b7bc59c0fb687a05e22a92a4 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 4 May 2012 14:16:59 +0200 Subject: usb:hsotg:samsung: Remove platform dependency from s3c-hsotg This code removes platform dependency from s3c-hsotg driver. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Kukjin Kim Signed-off-by: Felipe Balbi --- arch/arm/mach-exynos/mach-nuri.c | 1 + arch/arm/mach-exynos/mach-universal_c210.c | 1 + arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +- arch/arm/mach-s3c64xx/mach-smartq.c | 2 +- arch/arm/mach-s3c64xx/mach-smdk6410.c | 2 +- arch/arm/mach-s5pv210/mach-goni.c | 1 + arch/arm/plat-samsung/devs.c | 2 +- .../arm/plat-samsung/include/plat/regs-usb-hsotg.h | 379 --------------------- arch/arm/plat-samsung/include/plat/udc-hs.h | 34 -- drivers/usb/gadget/s3c-hsotg.c | 4 +- drivers/usb/gadget/s3c-hsotg.h | 379 +++++++++++++++++++++ include/linux/platform_data/s3c-hsotg.h | 35 ++ 12 files changed, 423 insertions(+), 419 deletions(-) delete mode 100644 arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h delete mode 100644 arch/arm/plat-samsung/include/plat/udc-hs.h create mode 100644 drivers/usb/gadget/s3c-hsotg.h create mode 100644 include/linux/platform_data/s3c-hsotg.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b4f1f902ce6d..e284b0e4ca2e 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 7ebf79c2ab34..ad15d0fda3c1 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -42,6 +42,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index e20bf5835365..a02f204d99ed 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -61,7 +61,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index ce745e19aa27..ee0d13c98378 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d55bc96d9582..bf477e33f0ee 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -72,7 +72,7 @@ #include #include #include -#include +#include #include "common.h" diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index a8933de3d627..921da285ff20 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 8b928f9bc1c3..a41c808847c0 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -57,7 +57,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h deleted file mode 100644 index dc90f5ede88f..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h +++ /dev/null @@ -1,379 +0,0 @@ -/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C - USB2.0 Highspeed/OtG device block registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H -#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__ - -#define S3C_HSOTG_REG(x) (x) - -#define S3C_GOTGCTL S3C_HSOTG_REG(0x000) -#define S3C_GOTGCTL_BSESVLD (1 << 19) -#define S3C_GOTGCTL_ASESVLD (1 << 18) -#define S3C_GOTGCTL_DBNC_SHORT (1 << 17) -#define S3C_GOTGCTL_CONID_B (1 << 16) -#define S3C_GOTGCTL_DEVHNPEN (1 << 11) -#define S3C_GOTGCTL_HSSETHNPEN (1 << 10) -#define S3C_GOTGCTL_HNPREQ (1 << 9) -#define S3C_GOTGCTL_HSTNEGSCS (1 << 8) -#define S3C_GOTGCTL_SESREQ (1 << 1) -#define S3C_GOTGCTL_SESREQSCS (1 << 0) - -#define S3C_GOTGINT S3C_HSOTG_REG(0x004) -#define S3C_GOTGINT_DbnceDone (1 << 19) -#define S3C_GOTGINT_ADevTOUTChg (1 << 18) -#define S3C_GOTGINT_HstNegDet (1 << 17) -#define S3C_GOTGINT_HstnegSucStsChng (1 << 9) -#define S3C_GOTGINT_SesReqSucStsChng (1 << 8) -#define S3C_GOTGINT_SesEndDet (1 << 2) - -#define S3C_GAHBCFG S3C_HSOTG_REG(0x008) -#define S3C_GAHBCFG_PTxFEmpLvl (1 << 8) -#define S3C_GAHBCFG_NPTxFEmpLvl (1 << 7) -#define S3C_GAHBCFG_DMAEn (1 << 5) -#define S3C_GAHBCFG_HBstLen_MASK (0xf << 1) -#define S3C_GAHBCFG_HBstLen_SHIFT (1) -#define S3C_GAHBCFG_HBstLen_Single (0x0 << 1) -#define S3C_GAHBCFG_HBstLen_Incr (0x1 << 1) -#define S3C_GAHBCFG_HBstLen_Incr4 (0x3 << 1) -#define S3C_GAHBCFG_HBstLen_Incr8 (0x5 << 1) -#define S3C_GAHBCFG_HBstLen_Incr16 (0x7 << 1) -#define S3C_GAHBCFG_GlblIntrEn (1 << 0) - -#define S3C_GUSBCFG S3C_HSOTG_REG(0x00C) -#define S3C_GUSBCFG_PHYLPClkSel (1 << 15) -#define S3C_GUSBCFG_HNPCap (1 << 9) -#define S3C_GUSBCFG_SRPCap (1 << 8) -#define S3C_GUSBCFG_PHYIf16 (1 << 3) -#define S3C_GUSBCFG_TOutCal_MASK (0x7 << 0) -#define S3C_GUSBCFG_TOutCal_SHIFT (0) -#define S3C_GUSBCFG_TOutCal_LIMIT (0x7) -#define S3C_GUSBCFG_TOutCal(_x) ((_x) << 0) - -#define S3C_GRSTCTL S3C_HSOTG_REG(0x010) - -#define S3C_GRSTCTL_AHBIdle (1 << 31) -#define S3C_GRSTCTL_DMAReq (1 << 30) -#define S3C_GRSTCTL_TxFNum_MASK (0x1f << 6) -#define S3C_GRSTCTL_TxFNum_SHIFT (6) -#define S3C_GRSTCTL_TxFNum_LIMIT (0x1f) -#define S3C_GRSTCTL_TxFNum(_x) ((_x) << 6) -#define S3C_GRSTCTL_TxFFlsh (1 << 5) -#define S3C_GRSTCTL_RxFFlsh (1 << 4) -#define S3C_GRSTCTL_INTknQFlsh (1 << 3) -#define S3C_GRSTCTL_FrmCntrRst (1 << 2) -#define S3C_GRSTCTL_HSftRst (1 << 1) -#define S3C_GRSTCTL_CSftRst (1 << 0) - -#define S3C_GINTSTS S3C_HSOTG_REG(0x014) -#define S3C_GINTMSK S3C_HSOTG_REG(0x018) - -#define S3C_GINTSTS_WkUpInt (1 << 31) -#define S3C_GINTSTS_SessReqInt (1 << 30) -#define S3C_GINTSTS_DisconnInt (1 << 29) -#define S3C_GINTSTS_ConIDStsChng (1 << 28) -#define S3C_GINTSTS_PTxFEmp (1 << 26) -#define S3C_GINTSTS_HChInt (1 << 25) -#define S3C_GINTSTS_PrtInt (1 << 24) -#define S3C_GINTSTS_FetSusp (1 << 22) -#define S3C_GINTSTS_incompIP (1 << 21) -#define S3C_GINTSTS_IncomplSOIN (1 << 20) -#define S3C_GINTSTS_OEPInt (1 << 19) -#define S3C_GINTSTS_IEPInt (1 << 18) -#define S3C_GINTSTS_EPMis (1 << 17) -#define S3C_GINTSTS_EOPF (1 << 15) -#define S3C_GINTSTS_ISOutDrop (1 << 14) -#define S3C_GINTSTS_EnumDone (1 << 13) -#define S3C_GINTSTS_USBRst (1 << 12) -#define S3C_GINTSTS_USBSusp (1 << 11) -#define S3C_GINTSTS_ErlySusp (1 << 10) -#define S3C_GINTSTS_GOUTNakEff (1 << 7) -#define S3C_GINTSTS_GINNakEff (1 << 6) -#define S3C_GINTSTS_NPTxFEmp (1 << 5) -#define S3C_GINTSTS_RxFLvl (1 << 4) -#define S3C_GINTSTS_SOF (1 << 3) -#define S3C_GINTSTS_OTGInt (1 << 2) -#define S3C_GINTSTS_ModeMis (1 << 1) -#define S3C_GINTSTS_CurMod_Host (1 << 0) - -#define S3C_GRXSTSR S3C_HSOTG_REG(0x01C) -#define S3C_GRXSTSP S3C_HSOTG_REG(0x020) - -#define S3C_GRXSTS_FN_MASK (0x7f << 25) -#define S3C_GRXSTS_FN_SHIFT (25) - -#define S3C_GRXSTS_PktSts_MASK (0xf << 17) -#define S3C_GRXSTS_PktSts_SHIFT (17) -#define S3C_GRXSTS_PktSts_GlobalOutNAK (0x1 << 17) -#define S3C_GRXSTS_PktSts_OutRX (0x2 << 17) -#define S3C_GRXSTS_PktSts_OutDone (0x3 << 17) -#define S3C_GRXSTS_PktSts_SetupDone (0x4 << 17) -#define S3C_GRXSTS_PktSts_SetupRX (0x6 << 17) - -#define S3C_GRXSTS_DPID_MASK (0x3 << 15) -#define S3C_GRXSTS_DPID_SHIFT (15) -#define S3C_GRXSTS_ByteCnt_MASK (0x7ff << 4) -#define S3C_GRXSTS_ByteCnt_SHIFT (4) -#define S3C_GRXSTS_EPNum_MASK (0xf << 0) -#define S3C_GRXSTS_EPNum_SHIFT (0) - -#define S3C_GRXFSIZ S3C_HSOTG_REG(0x024) - -#define S3C_GNPTXFSIZ S3C_HSOTG_REG(0x028) - -#define S3C_GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16) -#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT (16) -#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT (0xffff) -#define S3C_GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16) -#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0) -#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT (0) -#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff) -#define S3C_GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0) - -#define S3C_GNPTXSTS S3C_HSOTG_REG(0x02C) - -#define S3C_GNPTXSTS_NPtxQTop_MASK (0x7f << 24) -#define S3C_GNPTXSTS_NPtxQTop_SHIFT (24) - -#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16) -#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT (16) -#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff) - -#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0) -#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT (0) -#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff) - - -#define S3C_HPTXFSIZ S3C_HSOTG_REG(0x100) - -#define S3C_DPTXFSIZn(_a) S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4)) - -#define S3C_DPTXFSIZn_DPTxFSize_MASK (0xffff << 16) -#define S3C_DPTXFSIZn_DPTxFSize_SHIFT (16) -#define S3C_DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff) -#define S3C_DPTXFSIZn_DPTxFSize_LIMIT (0xffff) -#define S3C_DPTXFSIZn_DPTxFSize(_x) ((_x) << 16) - -#define S3C_DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0) -#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT (0) - -/* Device mode registers */ -#define S3C_DCFG S3C_HSOTG_REG(0x800) - -#define S3C_DCFG_EPMisCnt_MASK (0x1f << 18) -#define S3C_DCFG_EPMisCnt_SHIFT (18) -#define S3C_DCFG_EPMisCnt_LIMIT (0x1f) -#define S3C_DCFG_EPMisCnt(_x) ((_x) << 18) - -#define S3C_DCFG_PerFrInt_MASK (0x3 << 11) -#define S3C_DCFG_PerFrInt_SHIFT (11) -#define S3C_DCFG_PerFrInt_LIMIT (0x3) -#define S3C_DCFG_PerFrInt(_x) ((_x) << 11) - -#define S3C_DCFG_DevAddr_MASK (0x7f << 4) -#define S3C_DCFG_DevAddr_SHIFT (4) -#define S3C_DCFG_DevAddr_LIMIT (0x7f) -#define S3C_DCFG_DevAddr(_x) ((_x) << 4) - -#define S3C_DCFG_NZStsOUTHShk (1 << 2) - -#define S3C_DCFG_DevSpd_MASK (0x3 << 0) -#define S3C_DCFG_DevSpd_SHIFT (0) -#define S3C_DCFG_DevSpd_HS (0x0 << 0) -#define S3C_DCFG_DevSpd_FS (0x1 << 0) -#define S3C_DCFG_DevSpd_LS (0x2 << 0) -#define S3C_DCFG_DevSpd_FS48 (0x3 << 0) - -#define S3C_DCTL S3C_HSOTG_REG(0x804) - -#define S3C_DCTL_PWROnPrgDone (1 << 11) -#define S3C_DCTL_CGOUTNak (1 << 10) -#define S3C_DCTL_SGOUTNak (1 << 9) -#define S3C_DCTL_CGNPInNAK (1 << 8) -#define S3C_DCTL_SGNPInNAK (1 << 7) -#define S3C_DCTL_TstCtl_MASK (0x7 << 4) -#define S3C_DCTL_TstCtl_SHIFT (4) -#define S3C_DCTL_GOUTNakSts (1 << 3) -#define S3C_DCTL_GNPINNakSts (1 << 2) -#define S3C_DCTL_SftDiscon (1 << 1) -#define S3C_DCTL_RmtWkUpSig (1 << 0) - -#define S3C_DSTS S3C_HSOTG_REG(0x808) - -#define S3C_DSTS_SOFFN_MASK (0x3fff << 8) -#define S3C_DSTS_SOFFN_SHIFT (8) -#define S3C_DSTS_SOFFN_LIMIT (0x3fff) -#define S3C_DSTS_SOFFN(_x) ((_x) << 8) -#define S3C_DSTS_ErraticErr (1 << 3) -#define S3C_DSTS_EnumSpd_MASK (0x3 << 1) -#define S3C_DSTS_EnumSpd_SHIFT (1) -#define S3C_DSTS_EnumSpd_HS (0x0 << 1) -#define S3C_DSTS_EnumSpd_FS (0x1 << 1) -#define S3C_DSTS_EnumSpd_LS (0x2 << 1) -#define S3C_DSTS_EnumSpd_FS48 (0x3 << 1) - -#define S3C_DSTS_SuspSts (1 << 0) - -#define S3C_DIEPMSK S3C_HSOTG_REG(0x810) - -#define S3C_DIEPMSK_TxFIFOEmpty (1 << 7) -#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6) -#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5) -#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4) -#define S3C_DIEPMSK_TimeOUTMsk (1 << 3) -#define S3C_DIEPMSK_AHBErrMsk (1 << 2) -#define S3C_DIEPMSK_EPDisbldMsk (1 << 1) -#define S3C_DIEPMSK_XferComplMsk (1 << 0) - -#define S3C_DOEPMSK S3C_HSOTG_REG(0x814) - -#define S3C_DOEPMSK_Back2BackSetup (1 << 6) -#define S3C_DOEPMSK_OUTTknEPdisMsk (1 << 4) -#define S3C_DOEPMSK_SetupMsk (1 << 3) -#define S3C_DOEPMSK_AHBErrMsk (1 << 2) -#define S3C_DOEPMSK_EPDisbldMsk (1 << 1) -#define S3C_DOEPMSK_XferComplMsk (1 << 0) - -#define S3C_DAINT S3C_HSOTG_REG(0x818) -#define S3C_DAINTMSK S3C_HSOTG_REG(0x81C) - -#define S3C_DAINT_OutEP_SHIFT (16) -#define S3C_DAINT_OutEP(x) (1 << ((x) + 16)) -#define S3C_DAINT_InEP(x) (1 << (x)) - -#define S3C_DTKNQR1 S3C_HSOTG_REG(0x820) -#define S3C_DTKNQR2 S3C_HSOTG_REG(0x824) -#define S3C_DTKNQR3 S3C_HSOTG_REG(0x830) -#define S3C_DTKNQR4 S3C_HSOTG_REG(0x834) - -#define S3C_DVBUSDIS S3C_HSOTG_REG(0x828) -#define S3C_DVBUSPULSE S3C_HSOTG_REG(0x82C) - -#define S3C_DIEPCTL0 S3C_HSOTG_REG(0x900) -#define S3C_DOEPCTL0 S3C_HSOTG_REG(0xB00) -#define S3C_DIEPCTL(_a) S3C_HSOTG_REG(0x900 + ((_a) * 0x20)) -#define S3C_DOEPCTL(_a) S3C_HSOTG_REG(0xB00 + ((_a) * 0x20)) - -/* EP0 specialness: - * bits[29..28] - reserved (no SetD0PID, SetD1PID) - * bits[25..22] - should always be zero, this isn't a periodic endpoint - * bits[10..0] - MPS setting differenct for EP0 -*/ -#define S3C_D0EPCTL_MPS_MASK (0x3 << 0) -#define S3C_D0EPCTL_MPS_SHIFT (0) -#define S3C_D0EPCTL_MPS_64 (0x0 << 0) -#define S3C_D0EPCTL_MPS_32 (0x1 << 0) -#define S3C_D0EPCTL_MPS_16 (0x2 << 0) -#define S3C_D0EPCTL_MPS_8 (0x3 << 0) - -#define S3C_DxEPCTL_EPEna (1 << 31) -#define S3C_DxEPCTL_EPDis (1 << 30) -#define S3C_DxEPCTL_SetD1PID (1 << 29) -#define S3C_DxEPCTL_SetOddFr (1 << 29) -#define S3C_DxEPCTL_SetD0PID (1 << 28) -#define S3C_DxEPCTL_SetEvenFr (1 << 28) -#define S3C_DxEPCTL_SNAK (1 << 27) -#define S3C_DxEPCTL_CNAK (1 << 26) -#define S3C_DxEPCTL_TxFNum_MASK (0xf << 22) -#define S3C_DxEPCTL_TxFNum_SHIFT (22) -#define S3C_DxEPCTL_TxFNum_LIMIT (0xf) -#define S3C_DxEPCTL_TxFNum(_x) ((_x) << 22) - -#define S3C_DxEPCTL_Stall (1 << 21) -#define S3C_DxEPCTL_Snp (1 << 20) -#define S3C_DxEPCTL_EPType_MASK (0x3 << 18) -#define S3C_DxEPCTL_EPType_SHIFT (18) -#define S3C_DxEPCTL_EPType_Control (0x0 << 18) -#define S3C_DxEPCTL_EPType_Iso (0x1 << 18) -#define S3C_DxEPCTL_EPType_Bulk (0x2 << 18) -#define S3C_DxEPCTL_EPType_Intterupt (0x3 << 18) - -#define S3C_DxEPCTL_NAKsts (1 << 17) -#define S3C_DxEPCTL_DPID (1 << 16) -#define S3C_DxEPCTL_EOFrNum (1 << 16) -#define S3C_DxEPCTL_USBActEp (1 << 15) -#define S3C_DxEPCTL_NextEp_MASK (0xf << 11) -#define S3C_DxEPCTL_NextEp_SHIFT (11) -#define S3C_DxEPCTL_NextEp_LIMIT (0xf) -#define S3C_DxEPCTL_NextEp(_x) ((_x) << 11) - -#define S3C_DxEPCTL_MPS_MASK (0x7ff << 0) -#define S3C_DxEPCTL_MPS_SHIFT (0) -#define S3C_DxEPCTL_MPS_LIMIT (0x7ff) -#define S3C_DxEPCTL_MPS(_x) ((_x) << 0) - -#define S3C_DIEPINT(_a) S3C_HSOTG_REG(0x908 + ((_a) * 0x20)) -#define S3C_DOEPINT(_a) S3C_HSOTG_REG(0xB08 + ((_a) * 0x20)) - -#define S3C_DxEPINT_INEPNakEff (1 << 6) -#define S3C_DxEPINT_Back2BackSetup (1 << 6) -#define S3C_DxEPINT_INTknEPMis (1 << 5) -#define S3C_DxEPINT_INTknTXFEmp (1 << 4) -#define S3C_DxEPINT_OUTTknEPdis (1 << 4) -#define S3C_DxEPINT_Timeout (1 << 3) -#define S3C_DxEPINT_Setup (1 << 3) -#define S3C_DxEPINT_AHBErr (1 << 2) -#define S3C_DxEPINT_EPDisbld (1 << 1) -#define S3C_DxEPINT_XferCompl (1 << 0) - -#define S3C_DIEPTSIZ0 S3C_HSOTG_REG(0x910) - -#define S3C_DIEPTSIZ0_PktCnt_MASK (0x3 << 19) -#define S3C_DIEPTSIZ0_PktCnt_SHIFT (19) -#define S3C_DIEPTSIZ0_PktCnt_LIMIT (0x3) -#define S3C_DIEPTSIZ0_PktCnt(_x) ((_x) << 19) - -#define S3C_DIEPTSIZ0_XferSize_MASK (0x7f << 0) -#define S3C_DIEPTSIZ0_XferSize_SHIFT (0) -#define S3C_DIEPTSIZ0_XferSize_LIMIT (0x7f) -#define S3C_DIEPTSIZ0_XferSize(_x) ((_x) << 0) - - -#define DOEPTSIZ0 S3C_HSOTG_REG(0xB10) -#define S3C_DOEPTSIZ0_SUPCnt_MASK (0x3 << 29) -#define S3C_DOEPTSIZ0_SUPCnt_SHIFT (29) -#define S3C_DOEPTSIZ0_SUPCnt_LIMIT (0x3) -#define S3C_DOEPTSIZ0_SUPCnt(_x) ((_x) << 29) - -#define S3C_DOEPTSIZ0_PktCnt (1 << 19) -#define S3C_DOEPTSIZ0_XferSize_MASK (0x7f << 0) -#define S3C_DOEPTSIZ0_XferSize_SHIFT (0) - -#define S3C_DIEPTSIZ(_a) S3C_HSOTG_REG(0x910 + ((_a) * 0x20)) -#define S3C_DOEPTSIZ(_a) S3C_HSOTG_REG(0xB10 + ((_a) * 0x20)) - -#define S3C_DxEPTSIZ_MC_MASK (0x3 << 29) -#define S3C_DxEPTSIZ_MC_SHIFT (29) -#define S3C_DxEPTSIZ_MC_LIMIT (0x3) -#define S3C_DxEPTSIZ_MC(_x) ((_x) << 29) - -#define S3C_DxEPTSIZ_PktCnt_MASK (0x3ff << 19) -#define S3C_DxEPTSIZ_PktCnt_SHIFT (19) -#define S3C_DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff) -#define S3C_DxEPTSIZ_PktCnt_LIMIT (0x3ff) -#define S3C_DxEPTSIZ_PktCnt(_x) ((_x) << 19) - -#define S3C_DxEPTSIZ_XferSize_MASK (0x7ffff << 0) -#define S3C_DxEPTSIZ_XferSize_SHIFT (0) -#define S3C_DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff) -#define S3C_DxEPTSIZ_XferSize_LIMIT (0x7ffff) -#define S3C_DxEPTSIZ_XferSize(_x) ((_x) << 0) - - -#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20)) -#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20)) -#define S3C_DTXFSTS(_a) S3C_HSOTG_REG(0x918 + ((_a) * 0x20)) - -#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000)) - -#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */ diff --git a/arch/arm/plat-samsung/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h deleted file mode 100644 index c9e3667cb2b1..000000000000 --- a/arch/arm/plat-samsung/include/plat/udc-hs.h +++ /dev/null @@ -1,34 +0,0 @@ -/* arch/arm/plat-s3c/include/plat/udc-hs.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C USB2.0 High-speed / OtG platform information - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -enum s3c_hsotg_dmamode { - S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ - S3C_HSOTG_DMA_ONLY, /* always use DMA */ - S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */ -}; - -/** - * struct s3c_hsotg_plat - platform data for high-speed otg/udc - * @dma: Whether to use DMA or not. - * @is_osc: The clock source is an oscillator, not a crystal - */ -struct s3c_hsotg_plat { - enum s3c_hsotg_dmamode dma; - unsigned int is_osc : 1; - - int (*phy_init)(struct platform_device *pdev, int type); - int (*phy_exit)(struct platform_device *pdev, int type); -}; - -extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd); diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 105b206cd844..70c6f3b45cf2 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -34,9 +34,9 @@ #include #include -#include +#include "s3c-hsotg.h" +#include #include -#include #include #define DMA_ADDR_INVALID (~((dma_addr_t)0)) diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h new file mode 100644 index 000000000000..4c4ccc44b577 --- /dev/null +++ b/drivers/usb/gadget/s3c-hsotg.h @@ -0,0 +1,379 @@ +/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C - USB2.0 Highspeed/OtG device block registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H +#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__ + +#define S3C_HSOTG_REG(x) (x) + +#define S3C_GOTGCTL S3C_HSOTG_REG(0x000) +#define S3C_GOTGCTL_BSESVLD (1 << 19) +#define S3C_GOTGCTL_ASESVLD (1 << 18) +#define S3C_GOTGCTL_DBNC_SHORT (1 << 17) +#define S3C_GOTGCTL_CONID_B (1 << 16) +#define S3C_GOTGCTL_DEVHNPEN (1 << 11) +#define S3C_GOTGCTL_HSSETHNPEN (1 << 10) +#define S3C_GOTGCTL_HNPREQ (1 << 9) +#define S3C_GOTGCTL_HSTNEGSCS (1 << 8) +#define S3C_GOTGCTL_SESREQ (1 << 1) +#define S3C_GOTGCTL_SESREQSCS (1 << 0) + +#define S3C_GOTGINT S3C_HSOTG_REG(0x004) +#define S3C_GOTGINT_DbnceDone (1 << 19) +#define S3C_GOTGINT_ADevTOUTChg (1 << 18) +#define S3C_GOTGINT_HstNegDet (1 << 17) +#define S3C_GOTGINT_HstnegSucStsChng (1 << 9) +#define S3C_GOTGINT_SesReqSucStsChng (1 << 8) +#define S3C_GOTGINT_SesEndDet (1 << 2) + +#define S3C_GAHBCFG S3C_HSOTG_REG(0x008) +#define S3C_GAHBCFG_PTxFEmpLvl (1 << 8) +#define S3C_GAHBCFG_NPTxFEmpLvl (1 << 7) +#define S3C_GAHBCFG_DMAEn (1 << 5) +#define S3C_GAHBCFG_HBstLen_MASK (0xf << 1) +#define S3C_GAHBCFG_HBstLen_SHIFT (1) +#define S3C_GAHBCFG_HBstLen_Single (0x0 << 1) +#define S3C_GAHBCFG_HBstLen_Incr (0x1 << 1) +#define S3C_GAHBCFG_HBstLen_Incr4 (0x3 << 1) +#define S3C_GAHBCFG_HBstLen_Incr8 (0x5 << 1) +#define S3C_GAHBCFG_HBstLen_Incr16 (0x7 << 1) +#define S3C_GAHBCFG_GlblIntrEn (1 << 0) + +#define S3C_GUSBCFG S3C_HSOTG_REG(0x00C) +#define S3C_GUSBCFG_PHYLPClkSel (1 << 15) +#define S3C_GUSBCFG_HNPCap (1 << 9) +#define S3C_GUSBCFG_SRPCap (1 << 8) +#define S3C_GUSBCFG_PHYIf16 (1 << 3) +#define S3C_GUSBCFG_TOutCal_MASK (0x7 << 0) +#define S3C_GUSBCFG_TOutCal_SHIFT (0) +#define S3C_GUSBCFG_TOutCal_LIMIT (0x7) +#define S3C_GUSBCFG_TOutCal(_x) ((_x) << 0) + +#define S3C_GRSTCTL S3C_HSOTG_REG(0x010) + +#define S3C_GRSTCTL_AHBIdle (1 << 31) +#define S3C_GRSTCTL_DMAReq (1 << 30) +#define S3C_GRSTCTL_TxFNum_MASK (0x1f << 6) +#define S3C_GRSTCTL_TxFNum_SHIFT (6) +#define S3C_GRSTCTL_TxFNum_LIMIT (0x1f) +#define S3C_GRSTCTL_TxFNum(_x) ((_x) << 6) +#define S3C_GRSTCTL_TxFFlsh (1 << 5) +#define S3C_GRSTCTL_RxFFlsh (1 << 4) +#define S3C_GRSTCTL_INTknQFlsh (1 << 3) +#define S3C_GRSTCTL_FrmCntrRst (1 << 2) +#define S3C_GRSTCTL_HSftRst (1 << 1) +#define S3C_GRSTCTL_CSftRst (1 << 0) + +#define S3C_GINTSTS S3C_HSOTG_REG(0x014) +#define S3C_GINTMSK S3C_HSOTG_REG(0x018) + +#define S3C_GINTSTS_WkUpInt (1 << 31) +#define S3C_GINTSTS_SessReqInt (1 << 30) +#define S3C_GINTSTS_DisconnInt (1 << 29) +#define S3C_GINTSTS_ConIDStsChng (1 << 28) +#define S3C_GINTSTS_PTxFEmp (1 << 26) +#define S3C_GINTSTS_HChInt (1 << 25) +#define S3C_GINTSTS_PrtInt (1 << 24) +#define S3C_GINTSTS_FetSusp (1 << 22) +#define S3C_GINTSTS_incompIP (1 << 21) +#define S3C_GINTSTS_IncomplSOIN (1 << 20) +#define S3C_GINTSTS_OEPInt (1 << 19) +#define S3C_GINTSTS_IEPInt (1 << 18) +#define S3C_GINTSTS_EPMis (1 << 17) +#define S3C_GINTSTS_EOPF (1 << 15) +#define S3C_GINTSTS_ISOutDrop (1 << 14) +#define S3C_GINTSTS_EnumDone (1 << 13) +#define S3C_GINTSTS_USBRst (1 << 12) +#define S3C_GINTSTS_USBSusp (1 << 11) +#define S3C_GINTSTS_ErlySusp (1 << 10) +#define S3C_GINTSTS_GOUTNakEff (1 << 7) +#define S3C_GINTSTS_GINNakEff (1 << 6) +#define S3C_GINTSTS_NPTxFEmp (1 << 5) +#define S3C_GINTSTS_RxFLvl (1 << 4) +#define S3C_GINTSTS_SOF (1 << 3) +#define S3C_GINTSTS_OTGInt (1 << 2) +#define S3C_GINTSTS_ModeMis (1 << 1) +#define S3C_GINTSTS_CurMod_Host (1 << 0) + +#define S3C_GRXSTSR S3C_HSOTG_REG(0x01C) +#define S3C_GRXSTSP S3C_HSOTG_REG(0x020) + +#define S3C_GRXSTS_FN_MASK (0x7f << 25) +#define S3C_GRXSTS_FN_SHIFT (25) + +#define S3C_GRXSTS_PktSts_MASK (0xf << 17) +#define S3C_GRXSTS_PktSts_SHIFT (17) +#define S3C_GRXSTS_PktSts_GlobalOutNAK (0x1 << 17) +#define S3C_GRXSTS_PktSts_OutRX (0x2 << 17) +#define S3C_GRXSTS_PktSts_OutDone (0x3 << 17) +#define S3C_GRXSTS_PktSts_SetupDone (0x4 << 17) +#define S3C_GRXSTS_PktSts_SetupRX (0x6 << 17) + +#define S3C_GRXSTS_DPID_MASK (0x3 << 15) +#define S3C_GRXSTS_DPID_SHIFT (15) +#define S3C_GRXSTS_ByteCnt_MASK (0x7ff << 4) +#define S3C_GRXSTS_ByteCnt_SHIFT (4) +#define S3C_GRXSTS_EPNum_MASK (0xf << 0) +#define S3C_GRXSTS_EPNum_SHIFT (0) + +#define S3C_GRXFSIZ S3C_HSOTG_REG(0x024) + +#define S3C_GNPTXFSIZ S3C_HSOTG_REG(0x028) + +#define S3C_GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16) +#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT (16) +#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT (0xffff) +#define S3C_GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16) +#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0) +#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT (0) +#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff) +#define S3C_GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0) + +#define S3C_GNPTXSTS S3C_HSOTG_REG(0x02C) + +#define S3C_GNPTXSTS_NPtxQTop_MASK (0x7f << 24) +#define S3C_GNPTXSTS_NPtxQTop_SHIFT (24) + +#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16) +#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT (16) +#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff) + +#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0) +#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT (0) +#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff) + + +#define S3C_HPTXFSIZ S3C_HSOTG_REG(0x100) + +#define S3C_DPTXFSIZn(_a) S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4)) + +#define S3C_DPTXFSIZn_DPTxFSize_MASK (0xffff << 16) +#define S3C_DPTXFSIZn_DPTxFSize_SHIFT (16) +#define S3C_DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff) +#define S3C_DPTXFSIZn_DPTxFSize_LIMIT (0xffff) +#define S3C_DPTXFSIZn_DPTxFSize(_x) ((_x) << 16) + +#define S3C_DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0) +#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT (0) + +/* Device mode registers */ +#define S3C_DCFG S3C_HSOTG_REG(0x800) + +#define S3C_DCFG_EPMisCnt_MASK (0x1f << 18) +#define S3C_DCFG_EPMisCnt_SHIFT (18) +#define S3C_DCFG_EPMisCnt_LIMIT (0x1f) +#define S3C_DCFG_EPMisCnt(_x) ((_x) << 18) + +#define S3C_DCFG_PerFrInt_MASK (0x3 << 11) +#define S3C_DCFG_PerFrInt_SHIFT (11) +#define S3C_DCFG_PerFrInt_LIMIT (0x3) +#define S3C_DCFG_PerFrInt(_x) ((_x) << 11) + +#define S3C_DCFG_DevAddr_MASK (0x7f << 4) +#define S3C_DCFG_DevAddr_SHIFT (4) +#define S3C_DCFG_DevAddr_LIMIT (0x7f) +#define S3C_DCFG_DevAddr(_x) ((_x) << 4) + +#define S3C_DCFG_NZStsOUTHShk (1 << 2) + +#define S3C_DCFG_DevSpd_MASK (0x3 << 0) +#define S3C_DCFG_DevSpd_SHIFT (0) +#define S3C_DCFG_DevSpd_HS (0x0 << 0) +#define S3C_DCFG_DevSpd_FS (0x1 << 0) +#define S3C_DCFG_DevSpd_LS (0x2 << 0) +#define S3C_DCFG_DevSpd_FS48 (0x3 << 0) + +#define S3C_DCTL S3C_HSOTG_REG(0x804) + +#define S3C_DCTL_PWROnPrgDone (1 << 11) +#define S3C_DCTL_CGOUTNak (1 << 10) +#define S3C_DCTL_SGOUTNak (1 << 9) +#define S3C_DCTL_CGNPInNAK (1 << 8) +#define S3C_DCTL_SGNPInNAK (1 << 7) +#define S3C_DCTL_TstCtl_MASK (0x7 << 4) +#define S3C_DCTL_TstCtl_SHIFT (4) +#define S3C_DCTL_GOUTNakSts (1 << 3) +#define S3C_DCTL_GNPINNakSts (1 << 2) +#define S3C_DCTL_SftDiscon (1 << 1) +#define S3C_DCTL_RmtWkUpSig (1 << 0) + +#define S3C_DSTS S3C_HSOTG_REG(0x808) + +#define S3C_DSTS_SOFFN_MASK (0x3fff << 8) +#define S3C_DSTS_SOFFN_SHIFT (8) +#define S3C_DSTS_SOFFN_LIMIT (0x3fff) +#define S3C_DSTS_SOFFN(_x) ((_x) << 8) +#define S3C_DSTS_ErraticErr (1 << 3) +#define S3C_DSTS_EnumSpd_MASK (0x3 << 1) +#define S3C_DSTS_EnumSpd_SHIFT (1) +#define S3C_DSTS_EnumSpd_HS (0x0 << 1) +#define S3C_DSTS_EnumSpd_FS (0x1 << 1) +#define S3C_DSTS_EnumSpd_LS (0x2 << 1) +#define S3C_DSTS_EnumSpd_FS48 (0x3 << 1) + +#define S3C_DSTS_SuspSts (1 << 0) + +#define S3C_DIEPMSK S3C_HSOTG_REG(0x810) + +#define S3C_DIEPMSK_TxFIFOEmpty (1 << 7) +#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6) +#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5) +#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4) +#define S3C_DIEPMSK_TimeOUTMsk (1 << 3) +#define S3C_DIEPMSK_AHBErrMsk (1 << 2) +#define S3C_DIEPMSK_EPDisbldMsk (1 << 1) +#define S3C_DIEPMSK_XferComplMsk (1 << 0) + +#define S3C_DOEPMSK S3C_HSOTG_REG(0x814) + +#define S3C_DOEPMSK_Back2BackSetup (1 << 6) +#define S3C_DOEPMSK_OUTTknEPdisMsk (1 << 4) +#define S3C_DOEPMSK_SetupMsk (1 << 3) +#define S3C_DOEPMSK_AHBErrMsk (1 << 2) +#define S3C_DOEPMSK_EPDisbldMsk (1 << 1) +#define S3C_DOEPMSK_XferComplMsk (1 << 0) + +#define S3C_DAINT S3C_HSOTG_REG(0x818) +#define S3C_DAINTMSK S3C_HSOTG_REG(0x81C) + +#define S3C_DAINT_OutEP_SHIFT (16) +#define S3C_DAINT_OutEP(x) (1 << ((x) + 16)) +#define S3C_DAINT_InEP(x) (1 << (x)) + +#define S3C_DTKNQR1 S3C_HSOTG_REG(0x820) +#define S3C_DTKNQR2 S3C_HSOTG_REG(0x824) +#define S3C_DTKNQR3 S3C_HSOTG_REG(0x830) +#define S3C_DTKNQR4 S3C_HSOTG_REG(0x834) + +#define S3C_DVBUSDIS S3C_HSOTG_REG(0x828) +#define S3C_DVBUSPULSE S3C_HSOTG_REG(0x82C) + +#define S3C_DIEPCTL0 S3C_HSOTG_REG(0x900) +#define S3C_DOEPCTL0 S3C_HSOTG_REG(0xB00) +#define S3C_DIEPCTL(_a) S3C_HSOTG_REG(0x900 + ((_a) * 0x20)) +#define S3C_DOEPCTL(_a) S3C_HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting differenct for EP0 +*/ +#define S3C_D0EPCTL_MPS_MASK (0x3 << 0) +#define S3C_D0EPCTL_MPS_SHIFT (0) +#define S3C_D0EPCTL_MPS_64 (0x0 << 0) +#define S3C_D0EPCTL_MPS_32 (0x1 << 0) +#define S3C_D0EPCTL_MPS_16 (0x2 << 0) +#define S3C_D0EPCTL_MPS_8 (0x3 << 0) + +#define S3C_DxEPCTL_EPEna (1 << 31) +#define S3C_DxEPCTL_EPDis (1 << 30) +#define S3C_DxEPCTL_SetD1PID (1 << 29) +#define S3C_DxEPCTL_SetOddFr (1 << 29) +#define S3C_DxEPCTL_SetD0PID (1 << 28) +#define S3C_DxEPCTL_SetEvenFr (1 << 28) +#define S3C_DxEPCTL_SNAK (1 << 27) +#define S3C_DxEPCTL_CNAK (1 << 26) +#define S3C_DxEPCTL_TxFNum_MASK (0xf << 22) +#define S3C_DxEPCTL_TxFNum_SHIFT (22) +#define S3C_DxEPCTL_TxFNum_LIMIT (0xf) +#define S3C_DxEPCTL_TxFNum(_x) ((_x) << 22) + +#define S3C_DxEPCTL_Stall (1 << 21) +#define S3C_DxEPCTL_Snp (1 << 20) +#define S3C_DxEPCTL_EPType_MASK (0x3 << 18) +#define S3C_DxEPCTL_EPType_SHIFT (18) +#define S3C_DxEPCTL_EPType_Control (0x0 << 18) +#define S3C_DxEPCTL_EPType_Iso (0x1 << 18) +#define S3C_DxEPCTL_EPType_Bulk (0x2 << 18) +#define S3C_DxEPCTL_EPType_Intterupt (0x3 << 18) + +#define S3C_DxEPCTL_NAKsts (1 << 17) +#define S3C_DxEPCTL_DPID (1 << 16) +#define S3C_DxEPCTL_EOFrNum (1 << 16) +#define S3C_DxEPCTL_USBActEp (1 << 15) +#define S3C_DxEPCTL_NextEp_MASK (0xf << 11) +#define S3C_DxEPCTL_NextEp_SHIFT (11) +#define S3C_DxEPCTL_NextEp_LIMIT (0xf) +#define S3C_DxEPCTL_NextEp(_x) ((_x) << 11) + +#define S3C_DxEPCTL_MPS_MASK (0x7ff << 0) +#define S3C_DxEPCTL_MPS_SHIFT (0) +#define S3C_DxEPCTL_MPS_LIMIT (0x7ff) +#define S3C_DxEPCTL_MPS(_x) ((_x) << 0) + +#define S3C_DIEPINT(_a) S3C_HSOTG_REG(0x908 + ((_a) * 0x20)) +#define S3C_DOEPINT(_a) S3C_HSOTG_REG(0xB08 + ((_a) * 0x20)) + +#define S3C_DxEPINT_INEPNakEff (1 << 6) +#define S3C_DxEPINT_Back2BackSetup (1 << 6) +#define S3C_DxEPINT_INTknEPMis (1 << 5) +#define S3C_DxEPINT_INTknTXFEmp (1 << 4) +#define S3C_DxEPINT_OUTTknEPdis (1 << 4) +#define S3C_DxEPINT_Timeout (1 << 3) +#define S3C_DxEPINT_Setup (1 << 3) +#define S3C_DxEPINT_AHBErr (1 << 2) +#define S3C_DxEPINT_EPDisbld (1 << 1) +#define S3C_DxEPINT_XferCompl (1 << 0) + +#define S3C_DIEPTSIZ0 S3C_HSOTG_REG(0x910) + +#define S3C_DIEPTSIZ0_PktCnt_MASK (0x3 << 19) +#define S3C_DIEPTSIZ0_PktCnt_SHIFT (19) +#define S3C_DIEPTSIZ0_PktCnt_LIMIT (0x3) +#define S3C_DIEPTSIZ0_PktCnt(_x) ((_x) << 19) + +#define S3C_DIEPTSIZ0_XferSize_MASK (0x7f << 0) +#define S3C_DIEPTSIZ0_XferSize_SHIFT (0) +#define S3C_DIEPTSIZ0_XferSize_LIMIT (0x7f) +#define S3C_DIEPTSIZ0_XferSize(_x) ((_x) << 0) + + +#define DOEPTSIZ0 S3C_HSOTG_REG(0xB10) +#define S3C_DOEPTSIZ0_SUPCnt_MASK (0x3 << 29) +#define S3C_DOEPTSIZ0_SUPCnt_SHIFT (29) +#define S3C_DOEPTSIZ0_SUPCnt_LIMIT (0x3) +#define S3C_DOEPTSIZ0_SUPCnt(_x) ((_x) << 29) + +#define S3C_DOEPTSIZ0_PktCnt (1 << 19) +#define S3C_DOEPTSIZ0_XferSize_MASK (0x7f << 0) +#define S3C_DOEPTSIZ0_XferSize_SHIFT (0) + +#define S3C_DIEPTSIZ(_a) S3C_HSOTG_REG(0x910 + ((_a) * 0x20)) +#define S3C_DOEPTSIZ(_a) S3C_HSOTG_REG(0xB10 + ((_a) * 0x20)) + +#define S3C_DxEPTSIZ_MC_MASK (0x3 << 29) +#define S3C_DxEPTSIZ_MC_SHIFT (29) +#define S3C_DxEPTSIZ_MC_LIMIT (0x3) +#define S3C_DxEPTSIZ_MC(_x) ((_x) << 29) + +#define S3C_DxEPTSIZ_PktCnt_MASK (0x3ff << 19) +#define S3C_DxEPTSIZ_PktCnt_SHIFT (19) +#define S3C_DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff) +#define S3C_DxEPTSIZ_PktCnt_LIMIT (0x3ff) +#define S3C_DxEPTSIZ_PktCnt(_x) ((_x) << 19) + +#define S3C_DxEPTSIZ_XferSize_MASK (0x7ffff << 0) +#define S3C_DxEPTSIZ_XferSize_SHIFT (0) +#define S3C_DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff) +#define S3C_DxEPTSIZ_XferSize_LIMIT (0x7ffff) +#define S3C_DxEPTSIZ_XferSize(_x) ((_x) << 0) + + +#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20)) +#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20)) +#define S3C_DTXFSTS(_a) S3C_HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */ diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h new file mode 100644 index 000000000000..97ec12c2ded4 --- /dev/null +++ b/include/linux/platform_data/s3c-hsotg.h @@ -0,0 +1,35 @@ +/* include/linux/platform_data/s3c-hsotg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * S3C USB2.0 High-speed / OtG platform information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +enum s3c_hsotg_dmamode { + S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ + S3C_HSOTG_DMA_ONLY, /* always use DMA */ + S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */ +}; + +/** + * struct s3c_hsotg_plat - platform data for high-speed otg/udc + * @dma: Whether to use DMA or not. + * @is_osc: The clock source is an oscillator, not a crystal + */ +struct s3c_hsotg_plat { + enum s3c_hsotg_dmamode dma; + unsigned int is_osc:1; + int phy_type; + + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd); -- cgit v1.2.3 From aaeb6dfff02f9c1077c2a09c45b99f6255ef9159 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 11 May 2012 15:35:32 +0200 Subject: ARM: AT91: Add platform data for the AT91 ADCs The AT91 SoCs often embeds an ADC. This patch adds the needed platform data to specify the informations required by the driver to work properly. For now, we only need the reference voltage and which channels are available on the board. Signed-off-by: Maxime Ripard Acked-by: Nicolas Ferre Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/at91_adc.h | 61 ++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 include/linux/platform_data/at91_adc.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h new file mode 100644 index 000000000000..e15745b4f3a5 --- /dev/null +++ b/include/linux/platform_data/at91_adc.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2011 Free Electrons + * + * Licensed under the GPLv2 or later. + */ + +#ifndef _AT91_ADC_H_ +#define _AT91_ADC_H_ + +/** + * struct at91_adc_reg_desc - Various informations relative to registers + * @channel_base: Base offset for the channel data registers + * @drdy_mask: Mask of the DRDY field in the relevant registers + (Interruptions registers mostly) + * @status_register: Offset of the Interrupt Status Register + * @trigger_register: Offset of the Trigger setup register + */ +struct at91_adc_reg_desc { + u8 channel_base; + u32 drdy_mask; + u8 status_register; + u8 trigger_register; +}; + +/** + * struct at91_adc_trigger - description of triggers + * @name: name of the trigger advertised to the user + * @value: value to set in the ADC's trigger setup register + to enable the trigger + * @is_external: Does the trigger rely on an external pin? + */ +struct at91_adc_trigger { + const char *name; + u8 value; + bool is_external; +}; + +/** + * struct at91_adc_data - platform data for ADC driver + * @channels_used: channels in use on the board as a bitmask + * @num_channels: global number of channels available on the board + * @registers: Registers definition on the board + * @startup_time: startup time of the ADC in microseconds + * @trigger_list: Triggers available in the ADC + * @trigger_number: Number of triggers available in the ADC + * @use_external_triggers: does the board has external triggers availables + * @vref: Reference voltage for the ADC in millivolts + */ +struct at91_adc_data { + unsigned long channels_used; + u8 num_channels; + struct at91_adc_reg_desc *registers; + u8 startup_time; + struct at91_adc_trigger *trigger_list; + u8 trigger_number; + bool use_external_triggers; + u16 vref; +}; + +extern void __init at91_add_device_adc(struct at91_adc_data *data); +#endif -- cgit v1.2.3 From a07e103ef08c6907d695a06467d7ee950796fccf Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 May 2012 15:22:23 +0900 Subject: gpio: Emma Mobile GPIO driver V2 This patch is V2 of the Emma Mobile GPIO driver. This driver is designed to be reusable between multiple SoCs that share the same basic building block, but so far it has only been used on Emma Mobile EV2. Each driver instance handles 32 GPIOs with individually maskable IRQs. The driver operates on two I/O memory ranges and the 32 GPIOs are hooked up to two interrupts. In the case of Emma Mobile EV2 this GPIO building block is used as main external interrupt controller hooking up 159 GPIOS as 159 interrupts via 5 driver instances and 10 interrupts to the GIC and the Cortex-A9 Dual. Signed-off-by: Magnus Damm Acked-by: Linus Walleij Signed-off-by: Rafael J. Wysocki --- drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-em.c | 418 ++++++++++++++++++++++++++++++++++ include/linux/platform_data/gpio-em.h | 10 + 4 files changed, 435 insertions(+) create mode 100644 drivers/gpio/gpio-em.c create mode 100644 include/linux/platform_data/gpio-em.h (limited to 'include/linux/platform_data') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index e03653d69357..eb80ba300452 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -91,6 +91,12 @@ config GPIO_IT8761E help Say yes here to support GPIO functionality of IT8761E super I/O chip. +config GPIO_EM + tristate "Emma Mobile GPIO" + depends on ARM + help + Say yes here to support GPIO on Renesas Emma Mobile SoCs. + config GPIO_EP93XX def_bool y depends on ARCH_EP93XX diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 007f54bd0081..3f1f829260bb 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o +obj-$(CONFIG_GPIO_EM) += gpio-em.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c new file mode 100644 index 000000000000..150d9768811d --- /dev/null +++ b/drivers/gpio/gpio-em.c @@ -0,0 +1,418 @@ +/* + * Emma Mobile GPIO Support - GIO + * + * Copyright (C) 2012 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct em_gio_priv { + void __iomem *base0; + void __iomem *base1; + unsigned int irq_base; + spinlock_t sense_lock; + struct platform_device *pdev; + struct gpio_chip gpio_chip; + struct irq_chip irq_chip; + struct irq_domain *irq_domain; +}; + +#define GIO_E1 0x00 +#define GIO_E0 0x04 +#define GIO_EM 0x04 +#define GIO_OL 0x08 +#define GIO_OH 0x0c +#define GIO_I 0x10 +#define GIO_IIA 0x14 +#define GIO_IEN 0x18 +#define GIO_IDS 0x1c +#define GIO_IIM 0x1c +#define GIO_RAW 0x20 +#define GIO_MST 0x24 +#define GIO_IIR 0x28 + +#define GIO_IDT0 0x40 +#define GIO_IDT1 0x44 +#define GIO_IDT2 0x48 +#define GIO_IDT3 0x4c +#define GIO_RAWBL 0x50 +#define GIO_RAWBH 0x54 +#define GIO_IRBL 0x58 +#define GIO_IRBH 0x5c + +#define GIO_IDT(n) (GIO_IDT0 + ((n) * 4)) + +static inline unsigned long em_gio_read(struct em_gio_priv *p, int offs) +{ + if (offs < GIO_IDT0) + return ioread32(p->base0 + offs); + else + return ioread32(p->base1 + (offs - GIO_IDT0)); +} + +static inline void em_gio_write(struct em_gio_priv *p, int offs, + unsigned long value) +{ + if (offs < GIO_IDT0) + iowrite32(value, p->base0 + offs); + else + iowrite32(value, p->base1 + (offs - GIO_IDT0)); +} + +static inline struct em_gio_priv *irq_to_priv(struct irq_data *d) +{ + struct irq_chip *chip = irq_data_get_irq_chip(d); + return container_of(chip, struct em_gio_priv, irq_chip); +} + +static void em_gio_irq_disable(struct irq_data *d) +{ + struct em_gio_priv *p = irq_to_priv(d); + + em_gio_write(p, GIO_IDS, BIT(irqd_to_hwirq(d))); +} + +static void em_gio_irq_enable(struct irq_data *d) +{ + struct em_gio_priv *p = irq_to_priv(d); + + em_gio_write(p, GIO_IEN, BIT(irqd_to_hwirq(d))); +} + +#define GIO_ASYNC(x) (x + 8) + +static unsigned char em_gio_sense_table[IRQ_TYPE_SENSE_MASK + 1] = { + [IRQ_TYPE_EDGE_RISING] = GIO_ASYNC(0x00), + [IRQ_TYPE_EDGE_FALLING] = GIO_ASYNC(0x01), + [IRQ_TYPE_LEVEL_HIGH] = GIO_ASYNC(0x02), + [IRQ_TYPE_LEVEL_LOW] = GIO_ASYNC(0x03), + [IRQ_TYPE_EDGE_BOTH] = GIO_ASYNC(0x04), +}; + +static int em_gio_irq_set_type(struct irq_data *d, unsigned int type) +{ + unsigned char value = em_gio_sense_table[type & IRQ_TYPE_SENSE_MASK]; + struct em_gio_priv *p = irq_to_priv(d); + unsigned int reg, offset, shift; + unsigned long flags; + unsigned long tmp; + + if (!value) + return -EINVAL; + + offset = irqd_to_hwirq(d); + + pr_debug("gio: sense irq = %d, mode = %d\n", offset, value); + + /* 8 x 4 bit fields in 4 IDT registers */ + reg = GIO_IDT(offset >> 3); + shift = (offset & 0x07) << 4; + + spin_lock_irqsave(&p->sense_lock, flags); + + /* disable the interrupt in IIA */ + tmp = em_gio_read(p, GIO_IIA); + tmp &= ~BIT(offset); + em_gio_write(p, GIO_IIA, tmp); + + /* change the sense setting in IDT */ + tmp = em_gio_read(p, reg); + tmp &= ~(0xf << shift); + tmp |= value << shift; + em_gio_write(p, reg, tmp); + + /* clear pending interrupts */ + em_gio_write(p, GIO_IIR, BIT(offset)); + + /* enable the interrupt in IIA */ + tmp = em_gio_read(p, GIO_IIA); + tmp |= BIT(offset); + em_gio_write(p, GIO_IIA, tmp); + + spin_unlock_irqrestore(&p->sense_lock, flags); + + return 0; +} + +static irqreturn_t em_gio_irq_handler(int irq, void *dev_id) +{ + struct em_gio_priv *p = dev_id; + unsigned long pending; + unsigned int offset, irqs_handled = 0; + + while ((pending = em_gio_read(p, GIO_MST))) { + offset = __ffs(pending); + em_gio_write(p, GIO_IIR, BIT(offset)); + generic_handle_irq(irq_find_mapping(p->irq_domain, offset)); + irqs_handled++; + } + + return irqs_handled ? IRQ_HANDLED : IRQ_NONE; +} + +static inline struct em_gio_priv *gpio_to_priv(struct gpio_chip *chip) +{ + return container_of(chip, struct em_gio_priv, gpio_chip); +} + +static int em_gio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + em_gio_write(gpio_to_priv(chip), GIO_E0, BIT(offset)); + return 0; +} + +static int em_gio_get(struct gpio_chip *chip, unsigned offset) +{ + return (int)(em_gio_read(gpio_to_priv(chip), GIO_I) & BIT(offset)); +} + +static void __em_gio_set(struct gpio_chip *chip, unsigned int reg, + unsigned shift, int value) +{ + /* upper 16 bits contains mask and lower 16 actual value */ + em_gio_write(gpio_to_priv(chip), reg, + (1 << (shift + 16)) | (value << shift)); +} + +static void em_gio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + /* output is split into two registers */ + if (offset < 16) + __em_gio_set(chip, GIO_OL, offset, value); + else + __em_gio_set(chip, GIO_OH, offset - 16, value); +} + +static int em_gio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + /* write GPIO value to output before selecting output mode of pin */ + em_gio_set(chip, offset, value); + em_gio_write(gpio_to_priv(chip), GIO_E1, BIT(offset)); + return 0; +} + +static int em_gio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return irq_find_mapping(gpio_to_priv(chip)->irq_domain, offset); +} + +static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct em_gio_priv *p = h->host_data; + + pr_debug("gio: map hw irq = %d, virq = %d\n", (int)hw, virq); + + irq_set_chip_data(virq, h->host_data); + irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); /* kill me now */ + return 0; +} + +static struct irq_domain_ops em_gio_irq_domain_ops = { + .map = em_gio_irq_domain_map, +}; + +static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p) +{ + struct platform_device *pdev = p->pdev; + struct gpio_em_config *pdata = pdev->dev.platform_data; + + p->irq_base = irq_alloc_descs(pdata->irq_base, 0, + pdata->number_of_pins, numa_node_id()); + if (IS_ERR_VALUE(p->irq_base)) { + dev_err(&pdev->dev, "cannot get irq_desc\n"); + return -ENXIO; + } + pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n", + pdata->gpio_base, pdata->number_of_pins, p->irq_base); + + p->irq_domain = irq_domain_add_legacy(pdev->dev.of_node, + pdata->number_of_pins, + p->irq_base, 0, + &em_gio_irq_domain_ops, p); + if (!p->irq_domain) { + irq_free_descs(p->irq_base, pdata->number_of_pins); + return -ENXIO; + } + + return 0; +} + +static void __devexit em_gio_irq_domain_cleanup(struct em_gio_priv *p) +{ + struct gpio_em_config *pdata = p->pdev->dev.platform_data; + + irq_free_descs(p->irq_base, pdata->number_of_pins); + /* FIXME: irq domain wants to be freed! */ +} + +static int __devinit em_gio_probe(struct platform_device *pdev) +{ + struct gpio_em_config *pdata = pdev->dev.platform_data; + struct em_gio_priv *p; + struct resource *io[2], *irq[2]; + struct gpio_chip *gpio_chip; + struct irq_chip *irq_chip; + const char *name = dev_name(&pdev->dev); + int ret; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + if (!p) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + ret = -ENOMEM; + goto err0; + } + + p->pdev = pdev; + platform_set_drvdata(pdev, p); + spin_lock_init(&p->sense_lock); + + io[0] = platform_get_resource(pdev, IORESOURCE_MEM, 0); + io[1] = platform_get_resource(pdev, IORESOURCE_MEM, 1); + irq[0] = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + irq[1] = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + + if (!io[0] || !io[1] || !irq[0] || !irq[1] || !pdata) { + dev_err(&pdev->dev, "missing IRQ, IOMEM or configuration\n"); + ret = -EINVAL; + goto err1; + } + + p->base0 = ioremap_nocache(io[0]->start, resource_size(io[0])); + if (!p->base0) { + dev_err(&pdev->dev, "failed to remap low I/O memory\n"); + ret = -ENXIO; + goto err1; + } + + p->base1 = ioremap_nocache(io[1]->start, resource_size(io[1])); + if (!p->base1) { + dev_err(&pdev->dev, "failed to remap high I/O memory\n"); + ret = -ENXIO; + goto err2; + } + + gpio_chip = &p->gpio_chip; + gpio_chip->direction_input = em_gio_direction_input; + gpio_chip->get = em_gio_get; + gpio_chip->direction_output = em_gio_direction_output; + gpio_chip->set = em_gio_set; + gpio_chip->to_irq = em_gio_to_irq; + gpio_chip->label = name; + gpio_chip->owner = THIS_MODULE; + gpio_chip->base = pdata->gpio_base; + gpio_chip->ngpio = pdata->number_of_pins; + + irq_chip = &p->irq_chip; + irq_chip->name = name; + irq_chip->irq_mask = em_gio_irq_disable; + irq_chip->irq_unmask = em_gio_irq_enable; + irq_chip->irq_enable = em_gio_irq_enable; + irq_chip->irq_disable = em_gio_irq_disable; + irq_chip->irq_set_type = em_gio_irq_set_type; + irq_chip->flags = IRQCHIP_SKIP_SET_WAKE; + + ret = em_gio_irq_domain_init(p); + if (ret) { + dev_err(&pdev->dev, "cannot initialize irq domain\n"); + goto err3; + } + + if (request_irq(irq[0]->start, em_gio_irq_handler, 0, name, p)) { + dev_err(&pdev->dev, "failed to request low IRQ\n"); + ret = -ENOENT; + goto err4; + } + + if (request_irq(irq[1]->start, em_gio_irq_handler, 0, name, p)) { + dev_err(&pdev->dev, "failed to request high IRQ\n"); + ret = -ENOENT; + goto err5; + } + + ret = gpiochip_add(gpio_chip); + if (ret) { + dev_err(&pdev->dev, "failed to add GPIO controller\n"); + goto err6; + } + return 0; + +err6: + free_irq(irq[1]->start, pdev); +err5: + free_irq(irq[0]->start, pdev); +err4: + em_gio_irq_domain_cleanup(p); +err3: + iounmap(p->base1); +err2: + iounmap(p->base0); +err1: + kfree(p); +err0: + return ret; +} + +static int __devexit em_gio_remove(struct platform_device *pdev) +{ + struct em_gio_priv *p = platform_get_drvdata(pdev); + struct resource *irq[2]; + int ret; + + ret = gpiochip_remove(&p->gpio_chip); + if (ret) + return ret; + + irq[0] = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + irq[1] = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + + free_irq(irq[1]->start, pdev); + free_irq(irq[0]->start, pdev); + em_gio_irq_domain_cleanup(p); + iounmap(p->base1); + iounmap(p->base0); + kfree(p); + return 0; +} + +static struct platform_driver em_gio_device_driver = { + .probe = em_gio_probe, + .remove = __devexit_p(em_gio_remove), + .driver = { + .name = "em_gio", + } +}; + +module_platform_driver(em_gio_device_driver); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas Emma Mobile GIO Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/gpio-em.h b/include/linux/platform_data/gpio-em.h new file mode 100644 index 000000000000..573edfb046c4 --- /dev/null +++ b/include/linux/platform_data/gpio-em.h @@ -0,0 +1,10 @@ +#ifndef __GPIO_EM_H__ +#define __GPIO_EM_H__ + +struct gpio_em_config { + unsigned int gpio_base; + unsigned int irq_base; + unsigned int number_of_pins; +}; + +#endif /* __GPIO_EM_H__ */ -- cgit v1.2.3 From f7c2fe386ae92b471a0edd4fa4bed7033224b9bf Mon Sep 17 00:00:00 2001 From: "Felten, Lothar" Date: Sat, 12 May 2012 04:36:38 -0400 Subject: hwmon: INA219 and INA226 support Add support for the Texas Instruments INA219 and INA226 power monitors. Signed-off-by: Lothar Felten [guenter.roeck@ericsson.com: formatting cleanup; check for smbus word data; select PGA=8 for INA219] Signed-off-by: Guenter Roeck --- Documentation/hwmon/ina2xx | 29 +++ drivers/hwmon/Kconfig | 13 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/ina2xx.c | 368 +++++++++++++++++++++++++++++++++++ include/linux/platform_data/ina2xx.h | 19 ++ 5 files changed, 430 insertions(+) create mode 100644 Documentation/hwmon/ina2xx create mode 100644 drivers/hwmon/ina2xx.c create mode 100644 include/linux/platform_data/ina2xx.h (limited to 'include/linux/platform_data') diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx new file mode 100644 index 000000000000..f50a6cc27616 --- /dev/null +++ b/Documentation/hwmon/ina2xx @@ -0,0 +1,29 @@ +Kernel driver ina2xx +==================== + +Supported chips: + * Texas Instruments INA219 + Prefix: 'ina219' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + + * Texas Instruments INA226 + Prefix: 'ina226' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + +Author: Lothar Felten + +Description +----------- + +The INA219 is a high-side current shunt and power monitor with an I2C +interface. The INA219 monitors both shunt drop and supply voltage, with +programmable conversion times and filtering. + +The INA226 is a current shunt and power monitor with an I2C interface. +The INA226 monitors both a shunt voltage drop and bus supply voltage. + +The shunt value in micro-ohms can be set via platform data. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 8deedc1b9840..1c7bbd458902 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1102,6 +1102,19 @@ config SENSORS_AMC6821 This driver can also be build as a module. If so, the module will be called amc6821. +config SENSORS_INA2XX + tristate "Texas Instruments INA219, INA226" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for INA219 and INA226 power + monitor chips. + + The INA2xx driver is configured for the default configuration of + the part as described in the datasheet. + Default value for Rshunt is 10 mOhms. + This driver can also be built as a module. If so, the module + will be called ina2xx. + config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 6d3f11f71815..e1eeac13b851 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o +obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_JC42) += jc42.o obj-$(CONFIG_SENSORS_JZ4740) += jz4740-hwmon.o diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c new file mode 100644 index 000000000000..7f3f4a385729 --- /dev/null +++ b/drivers/hwmon/ina2xx.c @@ -0,0 +1,368 @@ +/* + * Driver for Texas Instruments INA219, INA226 power monitor chips + * + * INA219: + * Zero Drift Bi-Directional Current/Power Monitor with I2C Interface + * Datasheet: http://www.ti.com/product/ina219 + * + * INA226: + * Bi-Directional Current/Power Monitor with I2C Interface + * Datasheet: http://www.ti.com/product/ina226 + * + * Copyright (C) 2012 Lothar Felten + * Thanks to Jan Volkering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* common register definitions */ +#define INA2XX_CONFIG 0x00 +#define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */ +#define INA2XX_BUS_VOLTAGE 0x02 /* readonly */ +#define INA2XX_POWER 0x03 /* readonly */ +#define INA2XX_CURRENT 0x04 /* readonly */ +#define INA2XX_CALIBRATION 0x05 + +/* INA226 register definitions */ +#define INA226_MASK_ENABLE 0x06 +#define INA226_ALERT_LIMIT 0x07 +#define INA226_DIE_ID 0xFF + + +/* register count */ +#define INA219_REGISTERS 6 +#define INA226_REGISTERS 8 + +#define INA2XX_MAX_REGISTERS 8 + +/* settings - depend on use case */ +#define INA219_CONFIG_DEFAULT 0x399F /* PGA=8 */ +#define INA226_CONFIG_DEFAULT 0x4527 /* averages=16 */ + +/* worst case is 68.10 ms (~14.6Hz, ina219) */ +#define INA2XX_CONVERSION_RATE 15 + +enum ina2xx_ids { ina219, ina226 }; + +struct ina2xx_data { + struct device *hwmon_dev; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; + + int kind; + int registers; + u16 regs[INA2XX_MAX_REGISTERS]; +}; + +int ina2xx_read_word(struct i2c_client *client, int reg) +{ + int val = i2c_smbus_read_word_data(client, reg); + if (unlikely(val < 0)) { + dev_dbg(&client->dev, + "Failed to read register: %d\n", reg); + return val; + } + return be16_to_cpu(val); +} + +void ina2xx_write_word(struct i2c_client *client, int reg, int data) +{ + i2c_smbus_write_word_data(client, reg, cpu_to_be16(data)); +} + +static struct ina2xx_data *ina2xx_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ina2xx_data *data = i2c_get_clientdata(client); + struct ina2xx_data *ret = data; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + + HZ / INA2XX_CONVERSION_RATE) || !data->valid) { + + int i; + + dev_dbg(&client->dev, "Starting ina2xx update\n"); + + /* Read all registers */ + for (i = 0; i < data->registers; i++) { + int rv = ina2xx_read_word(client, i); + if (rv < 0) { + ret = ERR_PTR(rv); + goto abort; + } + data->regs[i] = rv; + } + data->last_updated = jiffies; + data->valid = 1; + } +abort: + mutex_unlock(&data->update_lock); + return ret; +} + +static int ina219_get_value(struct ina2xx_data *data, u8 reg) +{ + /* + * calculate exact value for the given register + * we assume default power-on reset settings: + * bus voltage range 32V + * gain = /8 + * adc 1 & 2 -> conversion time 532uS + * mode is continuous shunt and bus + * calibration value is INA219_CALIBRATION_VALUE + */ + int val = data->regs[reg]; + + switch (reg) { + case INA2XX_SHUNT_VOLTAGE: + /* LSB=10uV. Convert to mV. */ + val = DIV_ROUND_CLOSEST(val, 100); + break; + case INA2XX_BUS_VOLTAGE: + /* LSB=4mV. Register is not right aligned, convert to mV. */ + val = (val >> 3) * 4; + break; + case INA2XX_POWER: + /* LSB=20mW. Convert to uW */ + val = val * 20 * 1000; + break; + case INA2XX_CURRENT: + /* LSB=1mA (selected). Is in mA */ + break; + default: + /* programmer goofed */ + WARN_ON_ONCE(1); + val = 0; + break; + } + + return val; +} + +static int ina226_get_value(struct ina2xx_data *data, u8 reg) +{ + /* + * calculate exact value for the given register + * we assume default power-on reset settings: + * bus voltage range 32V + * gain = /8 + * adc 1 & 2 -> conversion time 532uS + * mode is continuous shunt and bus + * calibration value is INA226_CALIBRATION_VALUE + */ + int val = data->regs[reg]; + + switch (reg) { + case INA2XX_SHUNT_VOLTAGE: + /* LSB=2.5uV. Convert to mV. */ + val = DIV_ROUND_CLOSEST(val, 400); + break; + case INA2XX_BUS_VOLTAGE: + /* LSB=1.25mV. Convert to mV. */ + val = val + DIV_ROUND_CLOSEST(val, 4); + break; + case INA2XX_POWER: + /* LSB=25mW. Convert to uW */ + val = val * 25 * 1000; + break; + case INA2XX_CURRENT: + /* LSB=1mA (selected). Is in mA */ + break; + default: + /* programmer goofed */ + WARN_ON_ONCE(1); + val = 0; + break; + } + + return val; +} + +static ssize_t ina2xx_show_value(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ina2xx_data *data = ina2xx_update_device(dev); + int value = 0; + + if (IS_ERR(data)) + return PTR_ERR(data); + + switch (data->kind) { + case ina219: + value = ina219_get_value(data, attr->index); + break; + case ina226: + value = ina226_get_value(data, attr->index); + break; + default: + WARN_ON_ONCE(1); + break; + } + return snprintf(buf, PAGE_SIZE, "%d\n", value); +} + +/* shunt voltage */ +static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, \ + ina2xx_show_value, NULL, INA2XX_SHUNT_VOLTAGE); + +/* bus voltage */ +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, \ + ina2xx_show_value, NULL, INA2XX_BUS_VOLTAGE); + +/* calculated current */ +static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, \ + ina2xx_show_value, NULL, INA2XX_CURRENT); + +/* calculated power */ +static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, \ + ina2xx_show_value, NULL, INA2XX_POWER); + +/* pointers to created device attributes */ +static struct attribute *ina2xx_attributes[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_power1_input.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ina2xx_group = { + .attrs = ina2xx_attributes, +}; + +static int ina2xx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct ina2xx_data *data; + struct ina2xx_platform_data *pdata; + int ret = 0; + long shunt = 10000; /* default shunt value 10mOhms */ + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (client->dev.platform_data) { + pdata = + (struct ina2xx_platform_data *)client->dev.platform_data; + shunt = pdata->shunt_uohms; + } + + if (shunt <= 0) + return -ENODEV; + + /* set the device type */ + data->kind = id->driver_data; + + switch (data->kind) { + case ina219: + /* device configuration */ + ina2xx_write_word(client, INA2XX_CONFIG, INA219_CONFIG_DEFAULT); + + /* set current LSB to 1mA, shunt is in uOhms */ + /* (equation 13 in datasheet) */ + ina2xx_write_word(client, INA2XX_CALIBRATION, 40960000 / shunt); + dev_info(&client->dev, + "power monitor INA219 (Rshunt = %li uOhm)\n", shunt); + data->registers = INA219_REGISTERS; + break; + case ina226: + /* device configuration */ + ina2xx_write_word(client, INA2XX_CONFIG, INA226_CONFIG_DEFAULT); + + /* set current LSB to 1mA, shunt is in uOhms */ + /* (equation 1 in datasheet)*/ + ina2xx_write_word(client, INA2XX_CALIBRATION, 5120000 / shunt); + dev_info(&client->dev, + "power monitor INA226 (Rshunt = %li uOhm)\n", shunt); + data->registers = INA226_REGISTERS; + break; + default: + /* unknown device id */ + return -ENODEV; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + ret = sysfs_create_group(&client->dev.kobj, &ina2xx_group); + if (ret) + return ret; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + goto out_err_hwmon; + } + + return 0; + +out_err_hwmon: + sysfs_remove_group(&client->dev.kobj, &ina2xx_group); + return ret; +} + +static int ina2xx_remove(struct i2c_client *client) +{ + struct ina2xx_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &ina2xx_group); + + return 0; +} + +static const struct i2c_device_id ina2xx_id[] = { + { "ina219", ina219 }, + { "ina226", ina226 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ina2xx_id); + +static struct i2c_driver ina2xx_driver = { + .driver = { + .name = "ina2xx", + }, + .probe = ina2xx_probe, + .remove = ina2xx_remove, + .id_table = ina2xx_id, +}; + +static int __init ina2xx_init(void) +{ + return i2c_add_driver(&ina2xx_driver); +} + +static void __exit ina2xx_exit(void) +{ + i2c_del_driver(&ina2xx_driver); +} + +MODULE_AUTHOR("Lothar Felten "); +MODULE_DESCRIPTION("ina2xx driver"); +MODULE_LICENSE("GPL"); + +module_init(ina2xx_init); +module_exit(ina2xx_exit); diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h new file mode 100644 index 000000000000..9abc0ca7259b --- /dev/null +++ b/include/linux/platform_data/ina2xx.h @@ -0,0 +1,19 @@ +/* + * Driver for Texas Instruments INA219, INA226 power monitor chips + * + * Copyright (C) 2012 Lothar Felten + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/ina2xx file. + */ + +/** + * struct ina2xx_platform_data - ina2xx info + * @shunt_uohms shunt resistance in microohms + */ +struct ina2xx_platform_data { + long shunt_uohms; +}; -- cgit v1.2.3 From b9c7aff481f19dd655ae3ce6513817d625e2d47c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 29 May 2012 11:18:51 -0700 Subject: drivers/thermal/spear_thermal.c: add Device Tree probing capability SPEAr platforms now support DT and so must convert all drivers to support DT. This patch adds DT probing support for SPEAr thermal sensor driver and updates its documentation too. Also, as SPEAr is the only user of this driver and is only available with DT, make this an only DT driver. So, platform_data is completely removed and passed via DT now. Signed-off-by: Viresh Kumar Cc: Dan Carpenter Reviewed-by: Vincenzo Frascino Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- .../devicetree/bindings/thermal/spear-thermal.txt | 14 ++++++++++++ drivers/thermal/Kconfig | 1 + drivers/thermal/spear_thermal.c | 26 +++++++++++++--------- include/linux/platform_data/spear_thermal.h | 26 ---------------------- 4 files changed, 31 insertions(+), 36 deletions(-) create mode 100644 Documentation/devicetree/bindings/thermal/spear-thermal.txt delete mode 100644 include/linux/platform_data/spear_thermal.h (limited to 'include/linux/platform_data') diff --git a/Documentation/devicetree/bindings/thermal/spear-thermal.txt b/Documentation/devicetree/bindings/thermal/spear-thermal.txt new file mode 100644 index 000000000000..93e3b67c102d --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/spear-thermal.txt @@ -0,0 +1,14 @@ +* SPEAr Thermal + +Required properties: +- compatible : "st,thermal-spear1340" +- reg : Address range of the thermal registers +- st,thermal-flags: flags used to enable thermal sensor + +Example: + + thermal@fc000000 { + compatible = "st,thermal-spear1340"; + reg = <0xfc000000 0x1000>; + st,thermal-flags = <0x7000>; + }; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 514a691abea0..3ab2bd540b54 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -23,6 +23,7 @@ config SPEAR_THERMAL bool "SPEAr thermal sensor driver" depends on THERMAL depends on PLAT_SPEAR + depends on OF help Enable this to plug the SPEAr thermal sensor driver into the Linux thermal framework diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c index c2e32df3b164..ca40d36d0ba8 100644 --- a/drivers/thermal/spear_thermal.c +++ b/drivers/thermal/spear_thermal.c @@ -20,9 +20,9 @@ #include #include #include +#include #include #include -#include #include #define MD_FACTOR 1000 @@ -103,21 +103,20 @@ static int spear_thermal_probe(struct platform_device *pdev) { struct thermal_zone_device *spear_thermal = NULL; struct spear_thermal_dev *stdev; - struct spear_thermal_pdata *pdata; - int ret = 0; + struct device_node *np = pdev->dev.of_node; struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int ret = 0, val; + + if (!np || !of_property_read_u32(np, "st,thermal-flags", &val)) { + dev_err(&pdev->dev, "Failed: DT Pdata not passed\n"); + return -EINVAL; + } if (!stres) { dev_err(&pdev->dev, "memory resource missing\n"); return -ENODEV; } - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - dev_err(&pdev->dev, "platform data is NULL\n"); - return -EINVAL; - } - stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL); if (!stdev) { dev_err(&pdev->dev, "kzalloc fail\n"); @@ -144,7 +143,7 @@ static int spear_thermal_probe(struct platform_device *pdev) goto put_clk; } - stdev->flags = pdata->thermal_flags; + stdev->flags = val; writel_relaxed(stdev->flags, stdev->thermal_base); spear_thermal = thermal_zone_device_register("spear_thermal", 0, @@ -189,6 +188,12 @@ static int spear_thermal_exit(struct platform_device *pdev) return 0; } +static const struct of_device_id spear_thermal_id_table[] = { + { .compatible = "st,thermal-spear1340" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_thermal_id_table); + static struct platform_driver spear_thermal_driver = { .probe = spear_thermal_probe, .remove = spear_thermal_exit, @@ -196,6 +201,7 @@ static struct platform_driver spear_thermal_driver = { .name = "spear_thermal", .owner = THIS_MODULE, .pm = &spear_thermal_pm_ops, + .of_match_table = of_match_ptr(spear_thermal_id_table), }, }; diff --git a/include/linux/platform_data/spear_thermal.h b/include/linux/platform_data/spear_thermal.h deleted file mode 100644 index 724f2e1cbbcb..000000000000 --- a/include/linux/platform_data/spear_thermal.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * SPEAr thermal driver platform data. - * - * Copyright (C) 2011-2012 ST Microelectronics - * Author: Vincenzo Frascino - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef SPEAR_THERMAL_H -#define SPEAR_THERMAL_H - -/* SPEAr Thermal Sensor Platform Data */ -struct spear_thermal_pdata { - /* flags used to enable thermal sensor */ - unsigned int thermal_flags; -}; - -#endif /* SPEAR_THERMAL_H */ -- cgit v1.2.3 From 4a31bd28e86ac50eb620f6b5b36464c45b5fa38f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 11 Jan 2012 13:52:34 +0100 Subject: ARM: nomadik: convert to generic clock Remove more custom stuff by simply converting the Nomadik machine to use generic clocks and move the driver to drivers/clk. Acked-by: Arnd Bergmann Cc: Mike Turquette Signed-off-by: Linus Walleij --- arch/arm/Kconfig | 2 +- arch/arm/mach-nomadik/Makefile | 2 - arch/arm/mach-nomadik/clock.c | 75 ------------------------------- arch/arm/mach-nomadik/clock.h | 15 ------- arch/arm/mach-nomadik/cpu-8815.c | 4 +- drivers/clk/Makefile | 1 + drivers/clk/clk-nomadik.c | 47 +++++++++++++++++++ include/linux/platform_data/clk-nomadik.h | 2 + 8 files changed, 53 insertions(+), 95 deletions(-) delete mode 100644 arch/arm/mach-nomadik/clock.c delete mode 100644 arch/arm/mach-nomadik/clock.h create mode 100644 drivers/clk/clk-nomadik.c create mode 100644 include/linux/platform_data/clk-nomadik.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b649c5904a4f..e58bda6b6dde 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -912,7 +912,7 @@ config ARCH_NOMADIK select ARM_AMBA select ARM_VIC select CPU_ARM926T - select CLKDEV_LOOKUP + select COMMON_CLK select GENERIC_CLOCKEVENTS select PINCTRL select MIGHT_HAVE_CACHE_L2X0 diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index a6bbd1a7b4e7..a42c9a33d3bf 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -7,8 +7,6 @@ # Object file lists. -obj-y += clock.o - # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c deleted file mode 100644 index 48a59f24e10c..000000000000 --- a/arch/arm/mach-nomadik/clock.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/arch/arm/mach-nomadik/clock.c - * - * Copyright (C) 2009 Alessandro Rubini - */ -#include -#include -#include -#include -#include -#include "clock.h" - -/* - * The nomadik board uses generic clocks, but the serial pl011 file - * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them - */ -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -/* enable and disable do nothing */ -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -static struct clk clk_24 = { - .rate = 2400000, -}; - -static struct clk clk_48 = { - .rate = 48 * 1000 * 1000, -}; - -/* - * Catch-all default clock to satisfy drivers using the clk API. We don't - * model the actual hardware clocks yet. - */ -static struct clk clk_default; - -#define CLK(_clk, dev) \ - { \ - .clk = _clk, \ - .dev_id = dev, \ - } - -static struct clk_lookup lookups[] = { - { - .con_id = "apb_pclk", - .clk = &clk_default, - }, - CLK(&clk_24, "mtu0"), - CLK(&clk_24, "mtu1"), - CLK(&clk_48, "uart0"), - CLK(&clk_48, "uart1"), - CLK(&clk_default, "gpio.0"), - CLK(&clk_default, "gpio.1"), - CLK(&clk_default, "gpio.2"), - CLK(&clk_default, "gpio.3"), - CLK(&clk_default, "rng"), -}; - -int __init clk_init(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - return 0; -} diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h deleted file mode 100644 index 78da2e7c3985..000000000000 --- a/arch/arm/mach-nomadik/clock.h +++ /dev/null @@ -1,15 +0,0 @@ - -/* - * linux/arch/arm/mach-nomadik/clock.h - * - * Copyright (C) 2009 Alessandro Rubini - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -struct clk { - unsigned long rate; -}; - -int __init clk_init(void); diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 88511fef7987..6fd8e46567a4 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -35,7 +36,6 @@ #include #include -#include "clock.h" #include "cpu-8815.h" /* The 8815 has 4 GPIO blocks, let's register them immediately */ @@ -123,7 +123,7 @@ void __init cpu8815_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - clk_init(); + nomadik_clk_init(); } /* diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index b9a5158a30b1..26b6b92942e1 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -3,5 +3,6 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o # SoCs specific +obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c new file mode 100644 index 000000000000..517a8ff7121e --- /dev/null +++ b/drivers/clk/clk-nomadik.c @@ -0,0 +1,47 @@ +#include +#include +#include +#include +#include + +/* + * The Nomadik clock tree is described in the STN8815A12 DB V4.2 + * reference manual for the chip, page 94 ff. + */ + +void __init nomadik_clk_init(void) +{ + struct clk *clk; + + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + clk_register_clkdev(clk, NULL, "gpio.0"); + clk_register_clkdev(clk, NULL, "gpio.1"); + clk_register_clkdev(clk, NULL, "gpio.2"); + clk_register_clkdev(clk, NULL, "gpio.3"); + clk_register_clkdev(clk, NULL, "rng"); + + /* + * The 2.4 MHz TIMCLK reference clock is active at boot time, this is + * actually the MXTALCLK @19.2 MHz divided by 8. This clock is used + * by the timers and watchdog. See page 105 ff. + */ + clk = clk_register_fixed_rate(NULL, "TIMCLK", NULL, CLK_IS_ROOT, + 2400000); + clk_register_clkdev(clk, NULL, "mtu0"); + clk_register_clkdev(clk, NULL, "mtu1"); + + /* + * At boot time, PLL2 is set to generate a set of fixed clocks, + * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD + * I2C, IrDA, USB and SSP blocks. + */ + clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT, + 48000000); + clk_register_clkdev(clk, NULL, "uart0"); + clk_register_clkdev(clk, NULL, "uart1"); + clk_register_clkdev(clk, NULL, "mmci"); + clk_register_clkdev(clk, NULL, "ssp"); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); +} diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h new file mode 100644 index 000000000000..5713c87b2477 --- /dev/null +++ b/include/linux/platform_data/clk-nomadik.h @@ -0,0 +1,2 @@ +/* Minimal platform data header */ +void nomadik_clk_init(void); -- cgit v1.2.3 From 7a824e214e25a49442fe868dac0af8a904b24f58 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Mon, 11 Jun 2012 18:04:38 +0800 Subject: ASoC: mmp: add audio dma support mmp-pcm handle audio dma based on soc-dmaengine Support mmp and pxa910 Signed-off-by: Zhangfei Gao Signed-off-by: Leo Yan Signed-off-by: Qiao Zhou Signed-off-by: Mark Brown --- include/linux/platform_data/mmp_audio.h | 22 +++ sound/soc/pxa/Kconfig | 9 + sound/soc/pxa/Makefile | 2 + sound/soc/pxa/mmp-pcm.c | 297 ++++++++++++++++++++++++++++++++ 4 files changed, 330 insertions(+) create mode 100644 include/linux/platform_data/mmp_audio.h create mode 100644 sound/soc/pxa/mmp-pcm.c (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mmp_audio.h b/include/linux/platform_data/mmp_audio.h new file mode 100644 index 000000000000..0f25d165abd6 --- /dev/null +++ b/include/linux/platform_data/mmp_audio.h @@ -0,0 +1,22 @@ +/* + * MMP Platform AUDIO Management + * + * Copyright (c) 2011 Marvell Semiconductors Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef MMP_AUDIO_H +#define MMP_AUDIO_H + +struct mmp_audio_platdata { + u32 period_max_capture; + u32 buffer_max_capture; + u32 period_max_playback; + u32 buffer_max_playback; +}; + +#endif /* MMP_AUDIO_H */ diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index a0f7d3cfa470..5d76e2971fbe 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -8,6 +8,15 @@ config SND_PXA2XX_SOC the PXA2xx AC97, I2S or SSP interface. You will also need to select the audio interfaces to support below. +config SND_MMP_SOC + bool "Soc Audio for Marvell MMP chips" + depends on ARCH_MMP + select SND_SOC_DMAENGINE_PCM + select SND_ARM + help + Say Y if you want to add support for codecs attached to + the MMP SSPA interface. + config SND_PXA2XX_AC97 tristate select SND_AC97_CODEC diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index af357623be9d..f913e9bfce4f 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -3,11 +3,13 @@ snd-soc-pxa2xx-objs := pxa2xx-pcm.o snd-soc-pxa2xx-ac97-objs := pxa2xx-ac97.o snd-soc-pxa2xx-i2s-objs := pxa2xx-i2s.o snd-soc-pxa-ssp-objs := pxa-ssp.o +snd-soc-mmp-objs := mmp-pcm.o obj-$(CONFIG_SND_PXA2XX_SOC) += snd-soc-pxa2xx.o obj-$(CONFIG_SND_PXA2XX_SOC_AC97) += snd-soc-pxa2xx-ac97.o obj-$(CONFIG_SND_PXA2XX_SOC_I2S) += snd-soc-pxa2xx-i2s.o obj-$(CONFIG_SND_PXA_SOC_SSP) += snd-soc-pxa-ssp.o +obj-$(CONFIG_SND_MMP_SOC) += snd-soc-mmp.o # PXA Machine Support snd-soc-corgi-objs := corgi.o diff --git a/sound/soc/pxa/mmp-pcm.c b/sound/soc/pxa/mmp-pcm.c new file mode 100644 index 000000000000..73ac5463c9e4 --- /dev/null +++ b/sound/soc/pxa/mmp-pcm.c @@ -0,0 +1,297 @@ +/* + * linux/sound/soc/pxa/mmp-pcm.c + * + * Copyright (C) 2011 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct mmp_dma_data { + int ssp_id; + struct resource *dma_res; +}; + +#define MMP_PCM_INFO (SNDRV_PCM_INFO_MMAP | \ + SNDRV_PCM_INFO_MMAP_VALID | \ + SNDRV_PCM_INFO_INTERLEAVED | \ + SNDRV_PCM_INFO_PAUSE | \ + SNDRV_PCM_INFO_RESUME) + +#define MMP_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_pcm_hardware mmp_pcm_hardware[] = { + { + .info = MMP_PCM_INFO, + .formats = MMP_PCM_FORMATS, + .period_bytes_min = 1024, + .period_bytes_max = 2048, + .periods_min = 2, + .periods_max = 32, + .buffer_bytes_max = 4096, + .fifo_size = 32, + }, + { + .info = MMP_PCM_INFO, + .formats = MMP_PCM_FORMATS, + .period_bytes_min = 1024, + .period_bytes_max = 2048, + .periods_min = 2, + .periods_max = 32, + .buffer_bytes_max = 4096, + .fifo_size = 32, + }, +}; + +static int mmp_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct dma_chan *chan = snd_dmaengine_pcm_get_chan(substream); + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct pxa2xx_pcm_dma_params *dma_params; + struct dma_slave_config slave_config; + int ret; + + dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); + if (!dma_params) + return 0; + + ret = snd_hwparams_to_dma_slave_config(substream, params, &slave_config); + if (ret) + return ret; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + slave_config.dst_addr = dma_params->dev_addr; + slave_config.dst_maxburst = 4; + } else { + slave_config.src_addr = dma_params->dev_addr; + slave_config.src_maxburst = 4; + } + + ret = dmaengine_slave_config(chan, &slave_config); + if (ret) + return ret; + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + + return 0; +} + +static bool filter(struct dma_chan *chan, void *param) +{ + struct mmp_dma_data *dma_data = param; + bool found = false; + char *devname; + + devname = kasprintf(GFP_KERNEL, "%s.%d", dma_data->dma_res->name, + dma_data->ssp_id); + if ((strcmp(dev_name(chan->device->dev), devname) == 0) && + (chan->chan_id == dma_data->dma_res->start)) { + found = true; + } + + kfree(devname); + return found; +} + +static int mmp_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct platform_device *pdev = to_platform_device(rtd->platform->dev); + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct mmp_dma_data *dma_data; + struct resource *r; + int ret; + + r = platform_get_resource(pdev, IORESOURCE_DMA, substream->stream); + if (!r) + return -EBUSY; + + snd_soc_set_runtime_hwparams(substream, + &mmp_pcm_hardware[substream->stream]); + dma_data = devm_kzalloc(&pdev->dev, + sizeof(struct mmp_dma_data), GFP_KERNEL); + if (dma_data == NULL) + return -ENOMEM; + + dma_data->dma_res = r; + dma_data->ssp_id = cpu_dai->id; + + ret = snd_dmaengine_pcm_open(substream, filter, dma_data); + if (ret) { + devm_kfree(&pdev->dev, dma_data); + return ret; + } + + snd_dmaengine_pcm_set_data(substream, dma_data); + return 0; +} + +static int mmp_pcm_close(struct snd_pcm_substream *substream) +{ + struct mmp_dma_data *dma_data = snd_dmaengine_pcm_get_data(substream); + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct platform_device *pdev = to_platform_device(rtd->platform->dev); + + snd_dmaengine_pcm_close(substream); + devm_kfree(&pdev->dev, dma_data); + return 0; +} + +static int mmp_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned long off = vma->vm_pgoff; + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + return remap_pfn_range(vma, vma->vm_start, + __phys_to_pfn(runtime->dma_addr) + off, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +struct snd_pcm_ops mmp_pcm_ops = { + .open = mmp_pcm_open, + .close = mmp_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = mmp_pcm_hw_params, + .trigger = snd_dmaengine_pcm_trigger, + .pointer = snd_dmaengine_pcm_pointer, + .mmap = mmp_pcm_mmap, +}; + +static void mmp_pcm_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + struct gen_pool *gpool; + + gpool = sram_get_gpool("asram"); + if (!gpool) + return; + + for (stream = 0; stream < 2; stream++) { + size_t size = mmp_pcm_hardware[stream].buffer_bytes_max; + + substream = pcm->streams[stream].substream; + if (!substream) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + gen_pool_free(gpool, (unsigned long)buf->area, size); + buf->area = NULL; + } + + return; +} + +static int mmp_pcm_preallocate_dma_buffer(struct snd_pcm_substream *substream, + int stream) +{ + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = mmp_pcm_hardware[stream].buffer_bytes_max; + struct gen_pool *gpool; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = substream->pcm->card->dev; + buf->private_data = NULL; + + gpool = sram_get_gpool("asram"); + if (!gpool) + return -ENOMEM; + + buf->area = (unsigned char *)gen_pool_alloc(gpool, size); + if (!buf->area) + return -ENOMEM; + buf->addr = gen_pool_virt_to_phys(gpool, (unsigned long)buf->area); + buf->bytes = size; + return 0; +} + +int mmp_pcm_new(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_pcm_substream *substream; + struct snd_pcm *pcm = rtd->pcm; + int ret = 0, stream; + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + + ret = mmp_pcm_preallocate_dma_buffer(substream, stream); + if (ret) + goto err; + } + + return 0; + +err: + mmp_pcm_free_dma_buffers(pcm); + return ret; +} + +struct snd_soc_platform_driver mmp_soc_platform = { + .ops = &mmp_pcm_ops, + .pcm_new = mmp_pcm_new, + .pcm_free = mmp_pcm_free_dma_buffers, +}; + +static __devinit int mmp_pcm_probe(struct platform_device *pdev) +{ + struct mmp_audio_platdata *pdata = pdev->dev.platform_data; + + if (pdata) { + mmp_pcm_hardware[SNDRV_PCM_STREAM_PLAYBACK].buffer_bytes_max = + pdata->buffer_max_playback; + mmp_pcm_hardware[SNDRV_PCM_STREAM_PLAYBACK].period_bytes_max = + pdata->period_max_playback; + mmp_pcm_hardware[SNDRV_PCM_STREAM_CAPTURE].buffer_bytes_max = + pdata->buffer_max_capture; + mmp_pcm_hardware[SNDRV_PCM_STREAM_CAPTURE].period_bytes_max = + pdata->period_max_capture; + } + return snd_soc_register_platform(&pdev->dev, &mmp_soc_platform); +} + +static int __devexit mmp_pcm_remove(struct platform_device *pdev) +{ + snd_soc_unregister_platform(&pdev->dev); + return 0; +} + +static struct platform_driver mmp_pcm_driver = { + .driver = { + .name = "mmp-pcm-audio", + .owner = THIS_MODULE, + }, + + .probe = mmp_pcm_probe, + .remove = __devexit_p(mmp_pcm_remove), +}; + +module_platform_driver(mmp_pcm_driver); + +MODULE_AUTHOR("Leo Yan "); +MODULE_DESCRIPTION("MMP Soc Audio DMA module"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 8ec4cf5303e03941fa5fd91bbb9c85bd4ae88c47 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 25 Jun 2012 14:52:49 +0200 Subject: iio:adc: Add AD7265/AD7266 support This patch adds support for the Analog Devices AD7265 and AD7266 Analog-to-Digital converters. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ad7266.c | 536 +++++++++++++++++++++++++++++++++++ include/linux/platform_data/ad7266.h | 54 ++++ 4 files changed, 601 insertions(+) create mode 100644 drivers/iio/adc/ad7266.c create mode 100644 include/linux/platform_data/ad7266.h (limited to 'include/linux/platform_data') diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 4f7f584cfd61..8a78b4f3ef58 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -3,6 +3,16 @@ # menu "Analog to digital converters" +config AD7266 + tristate "Analog Devices AD7265/AD7266 ADC driver" + depends on SPI_MASTER + select IIO_BUFFER + select IIO_TRIGGER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Analog Devices AD7265 and AD7266 + ADCs. + config AT91_ADC tristate "Atmel AT91 ADC" depends on ARCH_AT91 diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 175c8d41ea99..52eec254c38c 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -2,4 +2,5 @@ # Makefile for IIO ADC drivers # +obj-$(CONFIG_AD7266) += ad7266.o obj-$(CONFIG_AT91_ADC) += at91_adc.o diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c new file mode 100644 index 000000000000..5c3f1ba5a06d --- /dev/null +++ b/drivers/iio/adc/ad7266.c @@ -0,0 +1,536 @@ +/* + * AD7266/65 SPI ADC driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include + +struct ad7266_state { + struct spi_device *spi; + struct regulator *reg; + unsigned long vref_uv; + + struct spi_transfer single_xfer[3]; + struct spi_message single_msg; + + enum ad7266_range range; + enum ad7266_mode mode; + bool fixed_addr; + struct gpio gpios[3]; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + * The buffer needs to be large enough to hold two samples (4 bytes) and + * the naturally aligned timestamp (8 bytes). + */ + uint8_t data[ALIGN(4, sizeof(s64)) + sizeof(s64)] ____cacheline_aligned; +}; + +static int ad7266_wakeup(struct ad7266_state *st) +{ + /* Any read with >= 2 bytes will wake the device */ + return spi_read(st->spi, st->data, 2); +} + +static int ad7266_powerdown(struct ad7266_state *st) +{ + /* Any read with < 2 bytes will powerdown the device */ + return spi_read(st->spi, st->data, 1); +} + +static int ad7266_preenable(struct iio_dev *indio_dev) +{ + struct ad7266_state *st = iio_priv(indio_dev); + int ret; + + ret = ad7266_wakeup(st); + if (ret) + return ret; + + ret = iio_sw_buffer_preenable(indio_dev); + if (ret) + ad7266_powerdown(st); + + return ret; +} + +static int ad7266_postdisable(struct iio_dev *indio_dev) +{ + struct ad7266_state *st = iio_priv(indio_dev); + return ad7266_powerdown(st); +} + +static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = { + .preenable = &ad7266_preenable, + .postenable = &iio_triggered_buffer_postenable, + .predisable = &iio_triggered_buffer_predisable, + .postdisable = &ad7266_postdisable, +}; + +static irqreturn_t ad7266_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct iio_buffer *buffer = indio_dev->buffer; + struct ad7266_state *st = iio_priv(indio_dev); + int ret; + + ret = spi_read(st->spi, st->data, 4); + if (ret == 0) { + if (indio_dev->scan_timestamp) + ((s64 *)st->data)[1] = pf->timestamp; + iio_push_to_buffer(buffer, (u8 *)st->data, pf->timestamp); + } + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static void ad7266_select_input(struct ad7266_state *st, unsigned int nr) +{ + unsigned int i; + + if (st->fixed_addr) + return; + + switch (st->mode) { + case AD7266_MODE_SINGLE_ENDED: + nr >>= 1; + break; + case AD7266_MODE_PSEUDO_DIFF: + nr |= 1; + break; + case AD7266_MODE_DIFF: + nr &= ~1; + break; + } + + for (i = 0; i < 3; ++i) + gpio_set_value(st->gpios[i].gpio, (bool)(nr & BIT(i))); +} + +static int ad7266_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) +{ + struct ad7266_state *st = iio_priv(indio_dev); + unsigned int nr = find_first_bit(scan_mask, indio_dev->masklength); + + ad7266_select_input(st, nr); + + return 0; +} + +static int ad7266_read_single(struct ad7266_state *st, int *val, + unsigned int address) +{ + int ret; + + ad7266_select_input(st, address); + + ret = spi_sync(st->spi, &st->single_msg); + *val = be16_to_cpu(st->data[address % 2]); + + return ret; +} + +static int ad7266_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, long m) +{ + struct ad7266_state *st = iio_priv(indio_dev); + unsigned long scale_uv; + int ret; + + switch (m) { + case IIO_CHAN_INFO_RAW: + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + + ret = ad7266_read_single(st, val, chan->address); + if (ret) + return ret; + + *val = (*val >> 2) & 0xfff; + if (chan->scan_type.sign == 's') + *val = sign_extend32(*val, 11); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + scale_uv = (st->vref_uv * 100); + if (st->mode == AD7266_MODE_DIFF) + scale_uv *= 2; + if (st->range == AD7266_RANGE_2VREF) + scale_uv *= 2; + + scale_uv >>= chan->scan_type.realbits; + *val = scale_uv / 100000; + *val2 = (scale_uv % 100000) * 10; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_OFFSET: + if (st->range == AD7266_RANGE_2VREF && + st->mode != AD7266_MODE_DIFF) + *val = 2048; + else + *val = 0; + return IIO_VAL_INT; + } + return -EINVAL; +} + +#define AD7266_CHAN(_chan, _sign) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_chan), \ + .address = (_chan), \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT \ + | IIO_CHAN_INFO_SCALE_SHARED_BIT \ + | IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ + .scan_index = (_chan), \ + .scan_type = { \ + .sign = (_sign), \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 2, \ + .endianness = IIO_BE, \ + }, \ +} + +#define AD7266_DECLARE_SINGLE_ENDED_CHANNELS(_name, _sign) \ +const struct iio_chan_spec ad7266_channels_##_name[] = { \ + AD7266_CHAN(0, (_sign)), \ + AD7266_CHAN(1, (_sign)), \ + AD7266_CHAN(2, (_sign)), \ + AD7266_CHAN(3, (_sign)), \ + AD7266_CHAN(4, (_sign)), \ + AD7266_CHAN(5, (_sign)), \ + AD7266_CHAN(6, (_sign)), \ + AD7266_CHAN(7, (_sign)), \ + AD7266_CHAN(8, (_sign)), \ + AD7266_CHAN(9, (_sign)), \ + AD7266_CHAN(10, (_sign)), \ + AD7266_CHAN(11, (_sign)), \ + IIO_CHAN_SOFT_TIMESTAMP(13), \ +} + +#define AD7266_DECLARE_SINGLE_ENDED_CHANNELS_FIXED(_name, _sign) \ +const struct iio_chan_spec ad7266_channels_##_name##_fixed[] = { \ + AD7266_CHAN(0, (_sign)), \ + AD7266_CHAN(1, (_sign)), \ + IIO_CHAN_SOFT_TIMESTAMP(2), \ +} + +static AD7266_DECLARE_SINGLE_ENDED_CHANNELS(u, 'u'); +static AD7266_DECLARE_SINGLE_ENDED_CHANNELS(s, 's'); +static AD7266_DECLARE_SINGLE_ENDED_CHANNELS_FIXED(u, 'u'); +static AD7266_DECLARE_SINGLE_ENDED_CHANNELS_FIXED(s, 's'); + +#define AD7266_CHAN_DIFF(_chan, _sign) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_chan) * 2, \ + .channel2 = (_chan) * 2 + 1, \ + .address = (_chan), \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT \ + | IIO_CHAN_INFO_SCALE_SHARED_BIT \ + | IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ + .scan_index = (_chan), \ + .scan_type = { \ + .sign = _sign, \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 2, \ + .endianness = IIO_BE, \ + }, \ + .differential = 1, \ +} + +#define AD7266_DECLARE_DIFF_CHANNELS(_name, _sign) \ +const struct iio_chan_spec ad7266_channels_diff_##_name[] = { \ + AD7266_CHAN_DIFF(0, (_sign)), \ + AD7266_CHAN_DIFF(1, (_sign)), \ + AD7266_CHAN_DIFF(2, (_sign)), \ + AD7266_CHAN_DIFF(3, (_sign)), \ + AD7266_CHAN_DIFF(4, (_sign)), \ + AD7266_CHAN_DIFF(5, (_sign)), \ + IIO_CHAN_SOFT_TIMESTAMP(6), \ +} + +static AD7266_DECLARE_DIFF_CHANNELS(s, 's'); +static AD7266_DECLARE_DIFF_CHANNELS(u, 'u'); + +#define AD7266_DECLARE_DIFF_CHANNELS_FIXED(_name, _sign) \ +const struct iio_chan_spec ad7266_channels_diff_fixed_##_name[] = { \ + AD7266_CHAN_DIFF(0, (_sign)), \ + AD7266_CHAN_DIFF(1, (_sign)), \ + IIO_CHAN_SOFT_TIMESTAMP(2), \ +} + +static AD7266_DECLARE_DIFF_CHANNELS_FIXED(s, 's'); +static AD7266_DECLARE_DIFF_CHANNELS_FIXED(u, 'u'); + +static const struct iio_info ad7266_info = { + .read_raw = &ad7266_read_raw, + .update_scan_mode = &ad7266_update_scan_mode, + .driver_module = THIS_MODULE, +}; + +static unsigned long ad7266_available_scan_masks[] = { + 0x003, + 0x00c, + 0x030, + 0x0c0, + 0x300, + 0xc00, + 0x000, +}; + +static unsigned long ad7266_available_scan_masks_diff[] = { + 0x003, + 0x00c, + 0x030, + 0x000, +}; + +static unsigned long ad7266_available_scan_masks_fixed[] = { + 0x003, + 0x000, +}; + +struct ad7266_chan_info { + const struct iio_chan_spec *channels; + unsigned int num_channels; + unsigned long *scan_masks; +}; + +#define AD7266_CHAN_INFO_INDEX(_differential, _signed, _fixed) \ + (((_differential) << 2) | ((_signed) << 1) | ((_fixed) << 0)) + +static const struct ad7266_chan_info ad7266_chan_infos[] = { + [AD7266_CHAN_INFO_INDEX(0, 0, 0)] = { + .channels = ad7266_channels_u, + .num_channels = ARRAY_SIZE(ad7266_channels_u), + .scan_masks = ad7266_available_scan_masks, + }, + [AD7266_CHAN_INFO_INDEX(0, 0, 1)] = { + .channels = ad7266_channels_u_fixed, + .num_channels = ARRAY_SIZE(ad7266_channels_u_fixed), + .scan_masks = ad7266_available_scan_masks_fixed, + }, + [AD7266_CHAN_INFO_INDEX(0, 1, 0)] = { + .channels = ad7266_channels_s, + .num_channels = ARRAY_SIZE(ad7266_channels_s), + .scan_masks = ad7266_available_scan_masks, + }, + [AD7266_CHAN_INFO_INDEX(0, 1, 1)] = { + .channels = ad7266_channels_s_fixed, + .num_channels = ARRAY_SIZE(ad7266_channels_s_fixed), + .scan_masks = ad7266_available_scan_masks_fixed, + }, + [AD7266_CHAN_INFO_INDEX(1, 0, 0)] = { + .channels = ad7266_channels_diff_u, + .num_channels = ARRAY_SIZE(ad7266_channels_diff_u), + .scan_masks = ad7266_available_scan_masks_diff, + }, + [AD7266_CHAN_INFO_INDEX(1, 0, 1)] = { + .channels = ad7266_channels_diff_fixed_u, + .num_channels = ARRAY_SIZE(ad7266_channels_diff_fixed_u), + .scan_masks = ad7266_available_scan_masks_fixed, + }, + [AD7266_CHAN_INFO_INDEX(1, 1, 0)] = { + .channels = ad7266_channels_diff_s, + .num_channels = ARRAY_SIZE(ad7266_channels_diff_s), + .scan_masks = ad7266_available_scan_masks_diff, + }, + [AD7266_CHAN_INFO_INDEX(1, 1, 1)] = { + .channels = ad7266_channels_diff_fixed_s, + .num_channels = ARRAY_SIZE(ad7266_channels_diff_fixed_s), + .scan_masks = ad7266_available_scan_masks_fixed, + }, +}; + +static void __devinit ad7266_init_channels(struct iio_dev *indio_dev) +{ + struct ad7266_state *st = iio_priv(indio_dev); + bool is_differential, is_signed; + const struct ad7266_chan_info *chan_info; + int i; + + is_differential = st->mode != AD7266_MODE_SINGLE_ENDED; + is_signed = (st->range == AD7266_RANGE_2VREF) | + (st->mode == AD7266_MODE_DIFF); + + i = AD7266_CHAN_INFO_INDEX(is_differential, is_signed, st->fixed_addr); + chan_info = &ad7266_chan_infos[i]; + + indio_dev->channels = chan_info->channels; + indio_dev->num_channels = chan_info->num_channels; + indio_dev->available_scan_masks = chan_info->scan_masks; + indio_dev->masklength = chan_info->num_channels - 1; +} + +static const char * const ad7266_gpio_labels[] = { + "AD0", "AD1", "AD2", +}; + +static int __devinit ad7266_probe(struct spi_device *spi) +{ + struct ad7266_platform_data *pdata = spi->dev.platform_data; + struct iio_dev *indio_dev; + struct ad7266_state *st; + unsigned int i; + int ret; + + indio_dev = iio_device_alloc(sizeof(*st)); + if (indio_dev == NULL) + return -ENOMEM; + + st = iio_priv(indio_dev); + + st->reg = regulator_get(&spi->dev, "vref"); + if (!IS_ERR_OR_NULL(st->reg)) { + ret = regulator_enable(st->reg); + if (ret) + goto error_put_reg; + + st->vref_uv = regulator_get_voltage(st->reg); + } else { + /* Use internal reference */ + st->vref_uv = 2500000; + } + + if (pdata) { + st->fixed_addr = pdata->fixed_addr; + st->mode = pdata->mode; + st->range = pdata->range; + + if (!st->fixed_addr) { + for (i = 0; i < ARRAY_SIZE(st->gpios); ++i) { + st->gpios[i].gpio = pdata->addr_gpios[i]; + st->gpios[i].flags = GPIOF_OUT_INIT_LOW; + st->gpios[i].label = ad7266_gpio_labels[i]; + } + ret = gpio_request_array(st->gpios, + ARRAY_SIZE(st->gpios)); + if (ret) + goto error_disable_reg; + } + } else { + st->fixed_addr = true; + st->range = AD7266_RANGE_VREF; + st->mode = AD7266_MODE_DIFF; + } + + spi_set_drvdata(spi, indio_dev); + st->spi = spi; + + indio_dev->dev.parent = &spi->dev; + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &ad7266_info; + + ad7266_init_channels(indio_dev); + + /* wakeup */ + st->single_xfer[0].rx_buf = &st->data; + st->single_xfer[0].len = 2; + st->single_xfer[0].cs_change = 1; + /* conversion */ + st->single_xfer[1].rx_buf = &st->data; + st->single_xfer[1].len = 4; + st->single_xfer[1].cs_change = 1; + /* powerdown */ + st->single_xfer[2].tx_buf = &st->data; + st->single_xfer[2].len = 1; + + spi_message_init(&st->single_msg); + spi_message_add_tail(&st->single_xfer[0], &st->single_msg); + spi_message_add_tail(&st->single_xfer[1], &st->single_msg); + spi_message_add_tail(&st->single_xfer[2], &st->single_msg); + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + &ad7266_trigger_handler, &iio_triggered_buffer_setup_ops); + if (ret) + goto error_free_gpios; + + ret = iio_device_register(indio_dev); + if (ret) + goto error_buffer_cleanup; + + return 0; + +error_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +error_free_gpios: + if (!st->fixed_addr) + gpio_free_array(st->gpios, ARRAY_SIZE(st->gpios)); +error_disable_reg: + if (!IS_ERR_OR_NULL(st->reg)) + regulator_disable(st->reg); +error_put_reg: + if (!IS_ERR_OR_NULL(st->reg)) + regulator_put(st->reg); + + iio_device_free(indio_dev); + + return ret; +} + +static int __devexit ad7266_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct ad7266_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + if (!st->fixed_addr) + gpio_free_array(st->gpios, ARRAY_SIZE(st->gpios)); + if (!IS_ERR_OR_NULL(st->reg)) { + regulator_disable(st->reg); + regulator_put(st->reg); + } + iio_device_free(indio_dev); + + return 0; +} + +static const struct spi_device_id ad7266_id[] = { + {"ad7265", 0}, + {"ad7266", 0}, + { } +}; +MODULE_DEVICE_TABLE(spi, ad7266_id); + +static struct spi_driver ad7266_driver = { + .driver = { + .name = "ad7266", + .owner = THIS_MODULE, + }, + .probe = ad7266_probe, + .remove = __devexit_p(ad7266_remove), + .id_table = ad7266_id, +}; +module_spi_driver(ad7266_driver); + +MODULE_AUTHOR("Lars-Peter Clausen "); +MODULE_DESCRIPTION("Analog Devices AD7266/65 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/ad7266.h b/include/linux/platform_data/ad7266.h new file mode 100644 index 000000000000..eabfdcb26992 --- /dev/null +++ b/include/linux/platform_data/ad7266.h @@ -0,0 +1,54 @@ +/* + * AD7266/65 SPI ADC driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __IIO_ADC_AD7266_H__ +#define __IIO_ADC_AD7266_H__ + +/** + * enum ad7266_range - AD7266 reference voltage range + * @AD7266_RANGE_VREF: Device is configured for input range 0V - VREF + * (RANGE pin set to low) + * @AD7266_RANGE_2VREF: Device is configured for input range 0V - 2VREF + * (RANGE pin set to high) + */ +enum ad7266_range { + AD7266_RANGE_VREF, + AD7266_RANGE_2VREF, +}; + +/** + * enum ad7266_mode - AD7266 sample mode + * @AD7266_MODE_DIFF: Device is configured for full differential mode + * (SGL/DIFF pin set to low, AD0 pin set to low) + * @AD7266_MODE_PSEUDO_DIFF: Device is configured for pseudo differential mode + * (SGL/DIFF pin set to low, AD0 pin set to high) + * @AD7266_MODE_SINGLE_ENDED: Device is configured for single-ended mode + * (SGL/DIFF pin set to high) + */ +enum ad7266_mode { + AD7266_MODE_DIFF, + AD7266_MODE_PSEUDO_DIFF, + AD7266_MODE_SINGLE_ENDED, +}; + +/** + * struct ad7266_platform_data - Platform data for the AD7266 driver + * @range: Reference voltage range the device is configured for + * @mode: Sample mode the device is configured for + * @fixed_addr: Whether the address pins are hard-wired + * @addr_gpios: GPIOs used for controlling the address pins, only used if + * fixed_addr is set to false. + */ +struct ad7266_platform_data { + enum ad7266_range range; + enum ad7266_mode mode; + bool fixed_addr; + unsigned int addr_gpios[3]; +}; + +#endif -- cgit v1.2.3 From e2fb50521c3811eddd60d911bc6d4d191f5d6e61 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Wed, 23 May 2012 15:08:10 -0500 Subject: omap2+: add drm device Register OMAP DRM/KMS platform device. DMM is split into a separate device using hwmod. Signed-off-by: Andy Gross Signed-off-by: Rob Clark Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 4 +++ arch/arm/mach-omap2/drm.c | 61 ++++++++++++++++++++++++++++++++++ drivers/staging/omapdrm/omap_drv.h | 2 +- drivers/staging/omapdrm/omap_priv.h | 55 ------------------------------ include/linux/platform_data/omap_drm.h | 52 +++++++++++++++++++++++++++++ 5 files changed, 118 insertions(+), 56 deletions(-) create mode 100644 arch/arm/mach-omap2/drm.c delete mode 100644 drivers/staging/omapdrm/omap_priv.h create mode 100644 include/linux/platform_data/omap_drm.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fa742f3c2629..a636cdc08876 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -189,6 +189,10 @@ endif # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o +ifneq ($(CONFIG_DRM_OMAP),) +obj-y += drm.o +endif + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c new file mode 100644 index 000000000000..72e0f01b715c --- /dev/null +++ b/arch/arm/mach-omap2/drm.c @@ -0,0 +1,61 @@ +/* + * DRM/KMS device registration for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) + +static struct platform_device omap_drm_device = { + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .name = "omapdrm", + .id = 0, +}; + +static int __init omap_init_drm(void) +{ + struct omap_hwmod *oh = NULL; + struct platform_device *pdev; + + /* lookup and populate the DMM information, if present - OMAP4+ */ + oh = omap_hwmod_lookup("dmm"); + + if (oh) { + pdev = omap_device_build(oh->name, -1, oh, NULL, 0, NULL, 0, + false); + WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", + oh->name); + } + + return platform_device_register(&omap_drm_device); + +} + +arch_initcall(omap_init_drm); + +#endif diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h index f238d574da0c..2092a9167d29 100644 --- a/drivers/staging/omapdrm/omap_drv.h +++ b/drivers/staging/omapdrm/omap_drv.h @@ -25,8 +25,8 @@ #include #include #include +#include #include "omap_drm.h" -#include "omap_priv.h" #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) #define VERB(fmt, ...) if (0) DRM_DEBUG(fmt, ##__VA_ARGS__) /* verbose debug */ diff --git a/drivers/staging/omapdrm/omap_priv.h b/drivers/staging/omapdrm/omap_priv.h deleted file mode 100644 index ef6441447147..000000000000 --- a/drivers/staging/omapdrm/omap_priv.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * include/drm/omap_priv.h - * - * Copyright (C) 2011 Texas Instruments - * Author: Rob Clark - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see . - */ - -#ifndef __OMAP_PRIV_H__ -#define __OMAP_PRIV_H__ - -/* Non-userspace facing APIs - */ - -/* optional platform data to configure the default configuration of which - * pipes/overlays/CRTCs are used.. if this is not provided, then instead the - * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to - * one manager, with priority given to managers that are connected to - * detected devices. Remaining overlays are used as video planes. This - * should be a good default behavior for most cases, but yet there still - * might be times when you wish to do something different. - */ -struct omap_kms_platform_data { - /* overlays to use as CRTCs: */ - int ovl_cnt; - const int *ovl_ids; - - /* overlays to use as video planes: */ - int pln_cnt; - const int *pln_ids; - - int mgr_cnt; - const int *mgr_ids; - - int dev_cnt; - const char **dev_names; -}; - -struct omap_drm_platform_data { - struct omap_kms_platform_data *kms_pdata; - struct omap_dmm_platform_data *dmm_pdata; -}; - -#endif /* __OMAP_DRM_H__ */ diff --git a/include/linux/platform_data/omap_drm.h b/include/linux/platform_data/omap_drm.h new file mode 100644 index 000000000000..3da73bdc2031 --- /dev/null +++ b/include/linux/platform_data/omap_drm.h @@ -0,0 +1,52 @@ +/* + * DRM/KMS platform data for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __PLATFORM_DATA_OMAP_DRM_H__ +#define __PLATFORM_DATA_OMAP_DRM_H__ + +/* + * Optional platform data to configure the default configuration of which + * pipes/overlays/CRTCs are used.. if this is not provided, then instead the + * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to + * one manager, with priority given to managers that are connected to + * detected devices. Remaining overlays are used as video planes. This + * should be a good default behavior for most cases, but yet there still + * might be times when you wish to do something different. + */ +struct omap_kms_platform_data { + /* overlays to use as CRTCs: */ + int ovl_cnt; + const int *ovl_ids; + + /* overlays to use as video planes: */ + int pln_cnt; + const int *pln_ids; + + int mgr_cnt; + const int *mgr_ids; + + int dev_cnt; + const char **dev_names; +}; + +struct omap_drm_platform_data { + struct omap_kms_platform_data *kms_pdata; +}; + +#endif /* __PLATFORM_DATA_OMAP_DRM_H__ */ -- cgit v1.2.3 From af97bace2cca58ee7c94bf4d31e820f29688d7a5 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Mon, 11 Jun 2012 22:56:26 +0200 Subject: i2c-nomadik: move header to The header and driver are only used by arm/mach-u8500 (and potentially arm/mach-nomadik), but the STA2X11 I/O Hub exports on PCIe a number of devices, including i2c-nomadik. This patch allows compilation of the driver under x86. Signed-off-by: Alessandro Rubini Acked-by: Giancarlo Asnaghi Tested-by: Linus Walleij Signed-off-by: Wolfram Sang --- arch/arm/mach-ux500/board-mop500.c | 2 +- arch/arm/mach-ux500/devices-common.h | 2 +- arch/arm/plat-nomadik/include/plat/i2c.h | 39 ------------------------------- drivers/i2c/busses/i2c-nomadik.c | 3 +-- include/linux/platform_data/i2c-nomadik.h | 39 +++++++++++++++++++++++++++++++ 5 files changed, 42 insertions(+), 43 deletions(-) delete mode 100644 arch/arm/plat-nomadik/include/plat/i2c.h create mode 100644 include/linux/platform_data/i2c-nomadik.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 1509a3cb5833..f9a964836d3a 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -39,7 +40,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 6e4706560266..23cf734b5384 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include struct spi_master_cntlr; diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h deleted file mode 100644 index 8ba70ffc31ec..000000000000 --- a/arch/arm/plat-nomadik/include/plat/i2c.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#ifndef __PLAT_I2C_H -#define __PLAT_I2C_H - -enum i2c_freq_mode { - I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ - I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ - I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ - I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ -}; - -/** - * struct nmk_i2c_controller - client specific controller configuration - * @clk_freq: clock frequency for the operation mode - * @slsu: Slave data setup time in ns. - * The needed setup time for three modes of operation - * are 250ns, 100ns and 10ns respectively thus leading - * to the values of 14, 6, 2 for a 48 MHz i2c clk - * @tft: Tx FIFO Threshold in bytes - * @rft: Rx FIFO Threshold in bytes - * @timeout Slave response timeout(ms) - * @sm: speed mode - */ -struct nmk_i2c_controller { - unsigned long clk_freq; - unsigned short slsu; - unsigned char tft; - unsigned char rft; - int timeout; - enum i2c_freq_mode sm; -}; - -#endif /* __PLAT_I2C_H */ diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 5267ab93d550..752f1fda371f 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -23,8 +23,7 @@ #include #include #include - -#include +#include #define DRIVER_NAME "nmk-i2c" diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h new file mode 100644 index 000000000000..c2303c3e4803 --- /dev/null +++ b/include/linux/platform_data/i2c-nomadik.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ +#ifndef __PDATA_I2C_NOMADIK_H +#define __PDATA_I2C_NOMADIK_H + +enum i2c_freq_mode { + I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ + I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ + I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ + I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ +}; + +/** + * struct nmk_i2c_controller - client specific controller configuration + * @clk_freq: clock frequency for the operation mode + * @slsu: Slave data setup time in ns. + * The needed setup time for three modes of operation + * are 250ns, 100ns and 10ns respectively thus leading + * to the values of 14, 6, 2 for a 48 MHz i2c clk + * @tft: Tx FIFO Threshold in bytes + * @rft: Rx FIFO Threshold in bytes + * @timeout Slave response timeout(ms) + * @sm: speed mode + */ +struct nmk_i2c_controller { + unsigned long clk_freq; + unsigned short slsu; + unsigned char tft; + unsigned char rft; + int timeout; + enum i2c_freq_mode sm; +}; + +#endif /* __PDATA_I2C_NOMADIK_H */ -- cgit v1.2.3 From 815e972110052e8da68b5b5298ca2cd69cb7c3c0 Mon Sep 17 00:00:00 2001 From: Nicolas Royer Date: Sun, 1 Jul 2012 19:19:43 +0200 Subject: ARM: AT91SAM9G45: add crypto peripherals MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Nicolas Royer Acked-by: Nicolas Ferre Acked-by: Eric Bénard Tested-by: Eric Bénard Signed-off-by: Herbert Xu --- arch/arm/mach-at91/at91sam9g45.c | 13 ++- arch/arm/mach-at91/at91sam9g45_devices.c | 128 ++++++++++++++++++++++++++ arch/arm/mach-at91/include/mach/at91sam9g45.h | 2 + include/linux/platform_data/atmel-aes.h | 22 +++++ 4 files changed, 164 insertions(+), 1 deletion(-) create mode 100644 include/linux/platform_data/atmel-aes.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 4792682d52b9..da6dc0f29657 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -182,6 +182,13 @@ static struct clk adc_op_clk = { .rate_hz = 13200000, }; +/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */ +static struct clk aestdessha_clk = { + .name = "aestdessha_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA, + .type = CLK_TYPE_PERIPHERAL, +}; + static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -211,6 +218,7 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &mmc1_clk, &adc_op_clk, + &aestdessha_clk, // irq0 }; @@ -231,6 +239,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk), + CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk), + CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk), + CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk), @@ -387,7 +398,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 3, /* Ethernet */ 0, /* Image Sensor Interface */ 2, /* USB Device High speed port */ - 0, + 0, /* AESTDESSHA Crypto HW Accelerators */ 0, /* Multimedia Card Interface 1 */ 0, 0, /* Advanced Interrupt Controller (IRQ0) */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 933fc9afe7d0..7102f62b64ef 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -18,6 +18,7 @@ #include #include #include +#include #include @@ -1830,6 +1831,130 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_add_device_serial(void) {} #endif +/* -------------------------------------------------------------------- + * SHA1/SHA256 + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE) +static struct resource sha_resources[] = { + { + .start = AT91SAM9G45_BASE_SHA, + .end = AT91SAM9G45_BASE_SHA + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_AESTDESSHA, + .end = AT91SAM9G45_ID_AESTDESSHA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_sha_device = { + .name = "atmel_sha", + .id = -1, + .resource = sha_resources, + .num_resources = ARRAY_SIZE(sha_resources), +}; + +static void __init at91_add_device_sha(void) +{ + platform_device_register(&at91sam9g45_sha_device); +} +#else +static void __init at91_add_device_sha(void) {} +#endif + +/* -------------------------------------------------------------------- + * DES/TDES + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE) +static struct resource tdes_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_TDES, + .end = AT91SAM9G45_BASE_TDES + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_AESTDESSHA, + .end = AT91SAM9G45_ID_AESTDESSHA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_tdes_device = { + .name = "atmel_tdes", + .id = -1, + .resource = tdes_resources, + .num_resources = ARRAY_SIZE(tdes_resources), +}; + +static void __init at91_add_device_tdes(void) +{ + platform_device_register(&at91sam9g45_tdes_device); +} +#else +static void __init at91_add_device_tdes(void) {} +#endif + +/* -------------------------------------------------------------------- + * AES + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE) +static struct aes_platform_data aes_data; +static u64 aes_dmamask = DMA_BIT_MASK(32); + +static struct resource aes_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_AES, + .end = AT91SAM9G45_BASE_AES + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_AESTDESSHA, + .end = AT91SAM9G45_ID_AESTDESSHA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_aes_device = { + .name = "atmel_aes", + .id = -1, + .dev = { + .dma_mask = &aes_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &aes_data, + }, + .resource = aes_resources, + .num_resources = ARRAY_SIZE(aes_resources), +}; + +static void __init at91_add_device_aes(void) +{ + struct at_dma_slave *atslave; + struct aes_dma_data *alt_atslave; + + alt_atslave = kzalloc(sizeof(struct aes_dma_data), GFP_KERNEL); + + /* DMA TX slave channel configuration */ + atslave = &alt_atslave->txdata; + atslave->dma_dev = &at_hdmac_device.dev; + atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW | + ATC_SRC_PER(AT_DMA_ID_AES_RX); + + /* DMA RX slave channel configuration */ + atslave = &alt_atslave->rxdata; + atslave->dma_dev = &at_hdmac_device.dev; + atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW | + ATC_DST_PER(AT_DMA_ID_AES_TX); + + aes_data.dma_slave = alt_atslave; + platform_device_register(&at91sam9g45_aes_device); +} +#else +static void __init at91_add_device_aes(void) {} +#endif /* -------------------------------------------------------------------- */ /* @@ -1847,6 +1972,9 @@ static int __init at91_add_standard_devices(void) at91_add_device_trng(); at91_add_device_watchdog(); at91_add_device_tc(); + at91_add_device_sha(); + at91_add_device_tdes(); + at91_add_device_aes(); return 0; } diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 3a4da24d5911..8eba1021f533 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -136,6 +136,8 @@ #define AT_DMA_ID_SSC1_RX 8 #define AT_DMA_ID_AC97_TX 9 #define AT_DMA_ID_AC97_RX 10 +#define AT_DMA_ID_AES_TX 11 +#define AT_DMA_ID_AES_RX 12 #define AT_DMA_ID_MCI1 13 #endif diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h new file mode 100644 index 000000000000..e7a1949bad26 --- /dev/null +++ b/include/linux/platform_data/atmel-aes.h @@ -0,0 +1,22 @@ +#ifndef __LINUX_ATMEL_AES_H +#define __LINUX_ATMEL_AES_H + +#include + +/** + * struct aes_dma_data - DMA data for AES + */ +struct aes_dma_data { + struct at_dma_slave txdata; + struct at_dma_slave rxdata; +}; + +/** + * struct aes_platform_data - board-specific AES configuration + * @dma_slave: DMA slave interface to use in data transfers. + */ +struct aes_platform_data { + struct aes_dma_data *dma_slave; +}; + +#endif /* __LINUX_ATMEL_AES_H */ -- cgit v1.2.3 From 50667d63085af108f625c83102430c1d74931d78 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 19 Jun 2012 23:44:25 +0200 Subject: ARM: u300: convert to common clock This converts the U300 clock implementation over to use the common struct clk and moves the implementation down into drivers/clk. Since VCO isn't used in tree it was removed, it's not hard to put it back in if need be. Signed-off-by: Linus Walleij [mturquette@linaro.org: trivial Makefile conflict] Signed-off-by: Mike Turquette --- arch/arm/Kconfig | 2 +- arch/arm/mach-u300/Makefile | 2 +- arch/arm/mach-u300/clock.c | 1504 -------------------------------- arch/arm/mach-u300/clock.h | 50 -- arch/arm/mach-u300/core.c | 21 +- arch/arm/mach-u300/timer.c | 2 +- drivers/clk/Makefile | 3 +- drivers/clk/clk-u300.c | 746 ++++++++++++++++ include/linux/platform_data/clk-u300.h | 1 + 9 files changed, 763 insertions(+), 1568 deletions(-) delete mode 100644 arch/arm/mach-u300/clock.c delete mode 100644 arch/arm/mach-u300/clock.h create mode 100644 drivers/clk/clk-u300.c create mode 100644 include/linux/platform_data/clk-u300.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a91009c61870..c59853738967 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -888,7 +888,7 @@ config ARCH_U300 select ARM_VIC select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index fd3a5c382f47..7e47d37aeb0e 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel, U300 machine. # -obj-y := core.o clock.o timer.o +obj-y := core.o timer.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c deleted file mode 100644 index 5535dd0a78c9..000000000000 --- a/arch/arm/mach-u300/clock.c +++ /dev/null @@ -1,1504 +0,0 @@ -/* - * - * arch/arm/mach-u300/clock.c - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Define clocks in the app platform. - * Author: Linus Walleij - * Author: Jonas Aaberg - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "clock.h" - -/* - * TODO: - * - move all handling of the CCR register into this file and create - * a spinlock for the CCR register - * - switch to the clkdevice lookup mechanism that maps clocks to - * device ID:s instead when it becomes available in kernel 2.6.29. - * - implement rate get/set for all clocks that need it. - */ - -/* - * Syscon clock I/O registers lock so clock requests don't collide - * NOTE: this is a local lock only used to lock access to clock and - * reset registers in syscon. - */ -static DEFINE_SPINLOCK(syscon_clkreg_lock); -static DEFINE_SPINLOCK(syscon_resetreg_lock); - -/* - * The clocking hierarchy currently looks like this. - * NOTE: the idea is NOT to show how the clocks are routed on the chip! - * The ideas is to show dependencies, so a clock higher up in the - * hierarchy has to be on in order for another clock to be on. Now, - * both CPU and DMA can actually be on top of the hierarchy, and that - * is not modeled currently. Instead we have the backbone AMBA bus on - * top. This bus cannot be programmed in any way but conceptually it - * needs to be active for the bridges and devices to transport data. - * - * Please be aware that a few clocks are hw controlled, which mean that - * the hw itself can turn on/off or change the rate of the clock when - * needed! - * - * AMBA bus - * | - * +- CPU - * +- FSMC NANDIF NAND Flash interface - * +- SEMI Shared Memory interface - * +- ISP Image Signal Processor (U335 only) - * +- CDS (U335 only) - * +- DMA Direct Memory Access Controller - * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL) - * +- APEX - * +- VIDEO_ENC AVE2/3 Video Encoder - * +- XGAM Graphics Accelerator Controller - * +- AHB - * | - * +- ahb:0 AHB Bridge - * | | - * | +- ahb:1 INTCON Interrupt controller - * | +- ahb:3 MSPRO Memory Stick Pro controller - * | +- ahb:4 EMIF External Memory interface - * | - * +- fast:0 FAST bridge - * | | - * | +- fast:1 MMCSD MMC/SD card reader controller - * | +- fast:2 I2S0 PCM I2S channel 0 controller - * | +- fast:3 I2S1 PCM I2S channel 1 controller - * | +- fast:4 I2C0 I2C channel 0 controller - * | +- fast:5 I2C1 I2C channel 1 controller - * | +- fast:6 SPI SPI controller - * | +- fast:7 UART1 Secondary UART (U335 only) - * | - * +- slow:0 SLOW bridge - * | - * +- slow:1 SYSCON (not possible to control) - * +- slow:2 WDOG Watchdog - * +- slow:3 UART0 primary UART - * +- slow:4 TIMER_APP Application timer - used in Linux - * +- slow:5 KEYPAD controller - * +- slow:6 GPIO controller - * +- slow:7 RTC controller - * +- slow:8 BT Bus Tracer (not used currently) - * +- slow:9 EH Event Handler (not used currently) - * +- slow:a TIMER_ACC Access style timer (not used currently) - * +- slow:b PPM (U335 only, what is that?) - */ - -/* - * Reset control functions. We remember if a block has been - * taken out of reset and don't remove the reset assertion again - * and vice versa. Currently we only remove resets so the - * enablement function is defined out. - */ -static void syscon_block_reset_enable(struct clk *clk) -{ - u16 val; - unsigned long iflags; - - /* Not all blocks support resetting */ - if (!clk->res_reg || !clk->res_mask) - return; - spin_lock_irqsave(&syscon_resetreg_lock, iflags); - val = readw(clk->res_reg); - val |= clk->res_mask; - writew(val, clk->res_reg); - spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); - clk->reset = true; -} - -static void syscon_block_reset_disable(struct clk *clk) -{ - u16 val; - unsigned long iflags; - - /* Not all blocks support resetting */ - if (!clk->res_reg || !clk->res_mask) - return; - spin_lock_irqsave(&syscon_resetreg_lock, iflags); - val = readw(clk->res_reg); - val &= ~clk->res_mask; - writew(val, clk->res_reg); - spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); - clk->reset = false; -} - -int __clk_get(struct clk *clk) -{ - u16 val; - - /* The MMC and MSPRO clocks need some special set-up */ - if (!strcmp(clk->name, "MCLK")) { - /* Set default MMC clock divisor to 18.9 MHz */ - writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); - /* Disable the MMC feedback clock */ - val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; - /* Disable MSPRO frequency */ - val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); - } - if (!strcmp(clk->name, "MSPRO")) { - val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR); - /* Disable the MMC feedback clock */ - val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; - /* Enable MSPRO frequency */ - val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR); - } - return 1; -} -EXPORT_SYMBOL(__clk_get); - -void __clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(__clk_put); - -static void syscon_clk_disable(struct clk *clk) -{ - unsigned long iflags; - - /* Don't touch the hardware controlled clocks */ - if (clk->hw_ctrld) - return; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void syscon_clk_enable(struct clk *clk) -{ - unsigned long iflags; - - /* Don't touch the hardware controlled clocks */ - if (clk->hw_ctrld) - return; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static u16 syscon_clk_get_rate(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); - return val; -} - -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER -static void enable_i2s0_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Set I2S0 to use the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_I2S0_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val |= U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void enable_i2s1_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Set I2S1 to use the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val |= U300_SYSCON_CCR_I2S1_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val |= U300_SYSCON_CEFR_I2S1_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void disable_i2s0_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Disable I2S0 use of the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if no one else is using VCXO */ - if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) - val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -static void disable_i2s1_vcxo(void) -{ - u16 val; - unsigned long iflags; - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - /* Disable I2S1 use of the VCXO 26 MHz clock */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if no one else is using VCXO */ - if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) - val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR); - val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} -#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */ - - -static void syscon_clk_rate_set_mclk(unsigned long rate) -{ - u16 val; - u32 reg; - unsigned long iflags; - - switch (rate) { - case 18900000: - val = 0x0054; - break; - case 20800000: - val = 0x0044; - break; - case 23100000: - val = 0x0043; - break; - case 26000000: - val = 0x0033; - break; - case 29700000: - val = 0x0032; - break; - case 34700000: - val = 0x0022; - break; - case 41600000: - val = 0x0021; - break; - case 52000000: - val = 0x0011; - break; - case 104000000: - val = 0x0000; - break; - default: - printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n", - rate); - return; - } - - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & - ~U300_SYSCON_MMF0R_MASK; - writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} - -void syscon_clk_rate_set_cpuclk(unsigned long rate) -{ - u16 val; - unsigned long iflags; - - switch (rate) { - case 13000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER; - break; - case 52000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE; - break; - case 104000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH; - break; - case 208000000: - val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST; - break; - default: - return; - } - spin_lock_irqsave(&syscon_clkreg_lock, iflags); - val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) & - ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags); -} -EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk); - -void clk_disable(struct clk *clk) -{ - unsigned long iflags; - - spin_lock_irqsave(&clk->lock, iflags); - if (clk->usecount > 0 && !(--clk->usecount)) { - /* some blocks lack clocking registers and cannot be disabled */ - if (clk->disable) - clk->disable(clk); - if (likely((u32)clk->parent)) - clk_disable(clk->parent); - } -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER - if (unlikely(!strcmp(clk->name, "I2S0"))) - disable_i2s0_vcxo(); - if (unlikely(!strcmp(clk->name, "I2S1"))) - disable_i2s1_vcxo(); -#endif - spin_unlock_irqrestore(&clk->lock, iflags); -} -EXPORT_SYMBOL(clk_disable); - -int clk_enable(struct clk *clk) -{ - int ret = 0; - unsigned long iflags; - - spin_lock_irqsave(&clk->lock, iflags); - if (clk->usecount++ == 0) { - if (likely((u32)clk->parent)) - ret = clk_enable(clk->parent); - - if (unlikely(ret != 0)) - clk->usecount--; - else { - /* remove reset line (we never enable reset again) */ - syscon_block_reset_disable(clk); - /* clocks without enable function are always on */ - if (clk->enable) - clk->enable(clk); -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER - if (unlikely(!strcmp(clk->name, "I2S0"))) - enable_i2s0_vcxo(); - if (unlikely(!strcmp(clk->name, "I2S1"))) - enable_i2s1_vcxo(); -#endif - } - } - spin_unlock_irqrestore(&clk->lock, iflags); - return ret; - -} -EXPORT_SYMBOL(clk_enable); - -/* Returns the clock rate in Hz */ -static unsigned long clk_get_rate_cpuclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 52000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - return 104000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 208000000; - default: - break; - } - return clk->rate; -} - -static unsigned long clk_get_rate_ahb_clk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 6500000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 26000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 52000000; - default: - break; - } - return clk->rate; - -} - -static unsigned long clk_get_rate_emif_clk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 52000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 104000000; - default: - break; - } - return clk->rate; - -} - -static unsigned long clk_get_rate_xgamclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 6500000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - return 26000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 52000000; - default: - break; - } - - return clk->rate; -} - -static unsigned long clk_get_rate_mclk(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - /* - * Here, the 208 MHz PLL gets shut down and the always - * on 13 MHz PLL used for RTC etc kicks into use - * instead. - */ - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - { - /* - * This clock is under program control. The register is - * divided in two nybbles, bit 7-4 gives cycles-1 to count - * high, bit 3-0 gives cycles-1 to count low. Distribute - * these with no more than 1 cycle difference between - * low and high and add low and high to get the actual - * divisor. The base PLL is 208 MHz. Writing 0x00 will - * divide by 1 and 1 so the highest frequency possible - * is 104 MHz. - * - * e.g. 0x54 => - * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz - */ - u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) & - U300_SYSCON_MMF0R_MASK; - switch (val) { - case 0x0054: - return 18900000; - case 0x0044: - return 20800000; - case 0x0043: - return 23100000; - case 0x0033: - return 26000000; - case 0x0032: - return 29700000; - case 0x0022: - return 34700000; - case 0x0021: - return 41600000; - case 0x0011: - return 52000000; - case 0x0000: - return 104000000; - default: - break; - } - } - default: - break; - } - - return clk->rate; -} - -static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk) -{ - u16 val; - - val = syscon_clk_get_rate(); - - switch (val) { - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: - return 13000000; - case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: - case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: - return 26000000; - default: - break; - } - - return clk->rate; -} - -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk->get_rate) - return clk->get_rate(clk); - else - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate) -{ - if (rate <= 18900000) - return 18900000; - if (rate <= 20800000) - return 20800000; - if (rate <= 23100000) - return 23100000; - if (rate <= 26000000) - return 26000000; - if (rate <= 29700000) - return 29700000; - if (rate <= 34700000) - return 34700000; - if (rate <= 41600000) - return 41600000; - if (rate <= 52000000) - return 52000000; - return -EINVAL; -} - -static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) -{ - if (rate <= 13000000) - return 13000000; - if (rate <= 52000000) - return 52000000; - if (rate <= 104000000) - return 104000000; - if (rate <= 208000000) - return 208000000; - return -EINVAL; -} - -/* - * This adjusts a requested rate to the closest exact rate - * a certain clock can provide. For a fixed clock it's - * mostly clk->rate. - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */ - /* Else default to fixed value */ - - if (clk->round_rate) { - return (long) clk->round_rate(clk, rate); - } else { - printk(KERN_ERR "clock: Failed to round rate of %s\n", - clk->name); - } - return (long) clk->rate; -} -EXPORT_SYMBOL(clk_round_rate); - -static int clk_set_rate_mclk(struct clk *clk, unsigned long rate) -{ - syscon_clk_rate_set_mclk(clk_round_rate(clk, rate)); - return 0; -} - -static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate) -{ - syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate)); - return 0; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - /* TODO: set for EMIFCLK and AHBCLK */ - /* Else assume the clock is fixed and fail */ - if (clk->set_rate) { - return clk->set_rate(clk, rate); - } else { - printk(KERN_ERR "clock: Failed to set %s to %ld hz\n", - clk->name, rate); - return -EINVAL; - } -} -EXPORT_SYMBOL(clk_set_rate); - -/* - * Clock definitions. The clock parents are set to respective - * bridge and the clock framework makes sure that the clocks have - * parents activated and are brought out of reset when in use. - * - * Clocks that have hw_ctrld = true are hw controlled, and the hw - * can by itself turn these clocks on and off. - * So in other words, we don't really have to care about them. - */ - -static struct clk amba_clk = { - .name = "AMBA", - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = false, - .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock), -}; - -/* - * These blocks are connected directly to the AMBA bus - * with no bridge. - */ - -static struct clk cpu_clk = { - .name = "CPU", - .parent = &amba_clk, - .rate = 208000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_CPU_RESET_EN, - .set_rate = clk_set_rate_cpuclk, - .get_rate = clk_get_rate_cpuclk, - .round_rate = clk_round_rate_cpuclk, - .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock), -}; - -static struct clk nandif_clk = { - .name = "FSMC", - .parent = &amba_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_NANDIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock), -}; - -static struct clk semi_clk = { - .name = "SEMI", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - /* It is not possible to reset SEMI */ - .hw_ctrld = false, - .reset = false, - .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk isp_clk = { - .name = "ISP", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_ISP_RESET_EN, - .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock), -}; - -static struct clk cds_clk = { - .name = "CDS", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_CDS_RESET_EN, - .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock), -}; -#endif - -static struct clk dma_clk = { - .name = "DMA", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_DMAC_RESET_EN, - .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock), -}; - -static struct clk aaif_clk = { - .name = "AAIF", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_AAIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock), -}; - -static struct clk apex_clk = { - .name = "APEX", - .parent = &amba_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_APEX_RESET_EN, - .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock), -}; - -static struct clk video_enc_clk = { - .name = "VIDEO_ENC", - .parent = &amba_clk, - .rate = 208000000, /* this varies! */ - .hw_ctrld = false, - .reset = false, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - /* This has XGAM in the name but refers to the video encoder */ - .res_mask = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN, - .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock), -}; - -static struct clk xgam_clk = { - .name = "XGAMCLK", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_XGAM_RESET_EN, - .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN, - .get_rate = clk_get_rate_xgamclk, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock), -}; - -/* This clock is used to activate the video encoder */ -static struct clk ahb_clk = { - .name = "AHB", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, /* This one is set to false due to HW bug */ - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_AHB_RESET_EN, - .clk_val = U300_SYSCON_SBCER_AHB_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_ahb_clk, - .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock), -}; - - -/* - * Clocks on the AHB bridge - */ - -static struct clk ahb_subsys_clk = { - .name = "AHB_SUBSYS", - .parent = &amba_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = true, - .reset = false, - .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_ahb_clk, - .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock), -}; - -static struct clk intcon_clk = { - .name = "INTCON", - .parent = &ahb_subsys_clk, - .rate = 52000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN, - /* INTCON can be reset but not clock-gated */ - .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock), - -}; - -static struct clk mspro_clk = { - .name = "MSPRO", - .parent = &ahb_subsys_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_MSPRO_RESET_EN, - .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock), -}; - -static struct clk emif_clk = { - .name = "EMIF", - .parent = &ahb_subsys_clk, - .rate = 104000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR, - .res_mask = U300_SYSCON_RRR_EMIF_RESET_EN, - .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_emif_clk, - .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock), -}; - - -/* - * Clocks on the FAST bridge - */ -static struct clk fast_clk = { - .name = "FAST_BRIDGE", - .parent = &amba_clk, - .rate = 13000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock), -}; - -/* - * The MMCI apb_pclk is hardwired to the same terminal as the - * external MCI clock. Thus this will be referenced twice. - */ -static struct clk mmcsd_clk = { - .name = "MCLK", - .parent = &fast_clk, - .rate = 18900000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_MMC_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN, - .get_rate = clk_get_rate_mclk, - .set_rate = clk_set_rate_mclk, - .round_rate = clk_round_rate_mclk, - .disable = syscon_clk_disable, - .enable = syscon_clk_enable, - .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock), -}; - -static struct clk i2s0_clk = { - .name = "i2s0", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock), -}; - -static struct clk i2s1_clk = { - .name = "i2s1", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock), -}; - -static struct clk i2c0_clk = { - .name = "I2C0", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_I2C0_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock), -}; - -static struct clk i2c1_clk = { - .name = "I2C1", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_I2C1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock), -}; - -/* - * The SPI apb_pclk is hardwired to the same terminal as the - * external SPI clock. Thus this will be referenced twice. - */ -static struct clk spi_clk = { - .name = "SPI", - .parent = &fast_clk, - .rate = 26000000, /* this varies! */ - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_SPI_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .get_rate = clk_get_rate_i2s_i2c_spi, - .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk uart1_pclk = { - .name = "UART1_PCLK", - .parent = &fast_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR, - .res_mask = U300_SYSCON_RFR_UART1_RESET_ENABLE, - .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock), -}; - -/* This one is hardwired to PLL13 */ -static struct clk uart1_clk = { - .name = "UART1_CLK", - .rate = 13000000, - .hw_ctrld = true, - .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock), -}; -#endif - - -/* - * Clocks on the SLOW bridge - */ -static struct clk slow_clk = { - .name = "SLOW_BRIDGE", - .parent = &amba_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN, - .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock), -}; - -/* TODO: implement SYSCON clock? */ - -static struct clk wdog_clk = { - .name = "WDOG", - .parent = &slow_clk, - .hw_ctrld = false, - .rate = 32768, - .reset = false, - /* This is always on, cannot be enabled/disabled or reset */ - .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock), -}; - -static struct clk uart0_pclk = { - .name = "UART0_PCLK", - .parent = &slow_clk, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_UART_RESET_EN, - .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock), -}; - -/* This one is hardwired to PLL13 */ -static struct clk uart0_clk = { - .name = "UART0_CLK", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .lock = __SPIN_LOCK_UNLOCKED(uart0_clk.lock), -}; - -static struct clk keypad_clk = { - .name = "KEYPAD", - .parent = &slow_clk, - .rate = 32768, - .hw_ctrld = false, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_KEYPAD_RESET_EN, - .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock), -}; - -static struct clk gpio_clk = { - .name = "GPIO", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_GPIO_RESET_EN, - .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock), -}; - -static struct clk rtc_clk = { - .name = "RTC", - .parent = &slow_clk, - .rate = 32768, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_RTC_RESET_EN, - /* This clock is always on, cannot be enabled/disabled */ - .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock), -}; - -static struct clk bustr_clk = { - .name = "BUSTR", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_BTR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock), -}; - -static struct clk evhist_clk = { - .name = "EVHIST", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_EH_RESET_EN, - .clk_val = U300_SYSCON_SBCER_EH_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock), -}; - -static struct clk timer_clk = { - .name = "TIMER", - .parent = &slow_clk, - .rate = 13000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_ACC_TMR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock), -}; - -/* - * There is a binary divider in the hardware that divides - * the 13MHz PLL by 13 down to 1 MHz. - */ -static struct clk app_timer_clk = { - .name = "TIMER_APP", - .parent = &slow_clk, - .rate = 1000000, - .hw_ctrld = true, - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_APP_TMR_RESET_EN, - .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock), -}; - -#ifdef CONFIG_MACH_U300_BS335 -static struct clk ppm_clk = { - .name = "PPM", - .parent = &slow_clk, - .rate = 0, /* FIXME */ - .hw_ctrld = true, /* TODO: Look up if it is hw ctrld or not */ - .reset = true, - .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR, - .res_mask = U300_SYSCON_RSR_PPM_RESET_EN, - .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN, - .enable = syscon_clk_enable, - .disable = syscon_clk_disable, - .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock), -}; -#endif - -#define DEF_LOOKUP(devid, clkref) \ - { \ - .dev_id = devid, \ - .clk = clkref, \ - } - -#define DEF_LOOKUP_CON(devid, conid, clkref) \ - { \ - .dev_id = devid, \ - .con_id = conid, \ - .clk = clkref, \ - } - -/* - * Here we only define clocks that are meaningful to - * look up through clockdevice. - */ -static struct clk_lookup lookups[] = { - /* Connected directly to the AMBA bus */ - DEF_LOOKUP("amba", &amba_clk), - DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("fsmc-nand", &nandif_clk), - DEF_LOOKUP("semi", &semi_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("isp", &isp_clk), - DEF_LOOKUP("cds", &cds_clk), -#endif - DEF_LOOKUP("dma", &dma_clk), - DEF_LOOKUP("msl", &aaif_clk), - DEF_LOOKUP("apex", &apex_clk), - DEF_LOOKUP("video_enc", &video_enc_clk), - DEF_LOOKUP("xgam", &xgam_clk), - DEF_LOOKUP("ahb", &ahb_clk), - /* AHB bridge clocks */ - DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk), - DEF_LOOKUP("intcon", &intcon_clk), - DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk), - DEF_LOOKUP("mspro", &mspro_clk), - DEF_LOOKUP("pl172", &emif_clk), - DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk), - /* FAST bridge clocks */ - DEF_LOOKUP("fast", &fast_clk), - DEF_LOOKUP("mmci", &mmcsd_clk), - DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk), - /* - * The .0 and .1 identifiers on these comes from the platform device - * .id field and are assigned when the platform devices are registered. - */ - DEF_LOOKUP("i2s.0", &i2s0_clk), - DEF_LOOKUP("i2s.1", &i2s1_clk), - DEF_LOOKUP("stu300.0", &i2c0_clk), - DEF_LOOKUP("stu300.1", &i2c1_clk), - DEF_LOOKUP("pl022", &spi_clk), - DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("uart1", &uart1_clk), - DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk), -#endif - /* SLOW bridge clocks */ - DEF_LOOKUP("slow", &slow_clk), - DEF_LOOKUP("coh901327_wdog", &wdog_clk), - DEF_LOOKUP("uart0", &uart0_clk), - DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk), - DEF_LOOKUP("apptimer", &app_timer_clk), - DEF_LOOKUP("coh901461-keypad", &keypad_clk), - DEF_LOOKUP("u300-gpio", &gpio_clk), - DEF_LOOKUP("rtc-coh901331", &rtc_clk), - DEF_LOOKUP("bustr", &bustr_clk), - DEF_LOOKUP("evhist", &evhist_clk), - DEF_LOOKUP("timer", &timer_clk), -#ifdef CONFIG_MACH_U300_BS335 - DEF_LOOKUP("ppm", &ppm_clk), -#endif -}; - -static void __init clk_register(void) -{ - /* Register the lookups */ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} - -#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG)) -/* - * The following makes it possible to view the status (especially - * reference count and reset status) for the clocks in the platform - * by looking into the special file /u300_clocks - */ - -/* A list of all clocks in the platform */ -static struct clk *clks[] = { - /* Top node clock for the AMBA bus */ - &amba_clk, - /* Connected directly to the AMBA bus */ - &cpu_clk, - &nandif_clk, - &semi_clk, -#ifdef CONFIG_MACH_U300_BS335 - &isp_clk, - &cds_clk, -#endif - &dma_clk, - &aaif_clk, - &apex_clk, - &video_enc_clk, - &xgam_clk, - &ahb_clk, - - /* AHB bridge clocks */ - &ahb_subsys_clk, - &intcon_clk, - &mspro_clk, - &emif_clk, - /* FAST bridge clocks */ - &fast_clk, - &mmcsd_clk, - &i2s0_clk, - &i2s1_clk, - &i2c0_clk, - &i2c1_clk, - &spi_clk, -#ifdef CONFIG_MACH_U300_BS335 - &uart1_clk, - &uart1_pclk, -#endif - /* SLOW bridge clocks */ - &slow_clk, - &wdog_clk, - &uart0_clk, - &uart0_pclk, - &app_timer_clk, - &keypad_clk, - &gpio_clk, - &rtc_clk, - &bustr_clk, - &evhist_clk, - &timer_clk, -#ifdef CONFIG_MACH_U300_BS335 - &ppm_clk, -#endif -}; - -static int u300_clocks_show(struct seq_file *s, void *data) -{ - struct clk *clk; - int i; - - seq_printf(s, "CLOCK DEVICE RESET STATE\t" \ - "ACTIVE\tUSERS\tHW CTRL FREQ\n"); - seq_printf(s, "---------------------------------------------" \ - "-----------------------------------------\n"); - for (i = 0; i < ARRAY_SIZE(clks); i++) { - clk = clks[i]; - if (clk != ERR_PTR(-ENOENT)) { - /* Format clock and device name nicely */ - char cdp[33]; - int chars; - - chars = snprintf(&cdp[0], 17, "%s", clk->name); - while (chars < 16) { - cdp[chars] = ' '; - chars++; - } - chars = snprintf(&cdp[16], 17, "%s", clk->dev ? - dev_name(clk->dev) : "N/A"); - while (chars < 16) { - cdp[chars+16] = ' '; - chars++; - } - cdp[32] = '\0'; - if (clk->get_rate || clk->rate != 0) - seq_printf(s, - "%s%s\t%s\t%d\t%s\t%lu Hz\n", - &cdp[0], - clk->reset ? - "ASSERTED" : "RELEASED", - clk->usecount ? "ON" : "OFF", - clk->usecount, - clk->hw_ctrld ? "YES" : "NO ", - clk_get_rate(clk)); - else - seq_printf(s, - "%s%s\t%s\t%d\t%s\t" \ - "(unknown rate)\n", - &cdp[0], - clk->reset ? - "ASSERTED" : "RELEASED", - clk->usecount ? "ON" : "OFF", - clk->usecount, - clk->hw_ctrld ? "YES" : "NO "); - } - } - return 0; -} - -static int u300_clocks_open(struct inode *inode, struct file *file) -{ - return single_open(file, u300_clocks_show, NULL); -} - -static const struct file_operations u300_clocks_operations = { - .open = u300_clocks_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init init_clk_read_debugfs(void) -{ - /* Expose a simple debugfs interface to view all clocks */ - (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO, - NULL, NULL, - &u300_clocks_operations); - return 0; -} -/* - * This needs to come in after the core_initcall() for the - * overall clocks, because debugfs is not available until - * the subsystems come up. - */ -module_init(init_clk_read_debugfs); -#endif - -int __init u300_clock_init(void) -{ - u16 val; - - /* - * FIXME: shall all this powermanagement stuff really live here??? - */ - - /* Set system to run at PLL208, max performance, a known state. */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Wait for the PLL208 to lock if not locked in yet */ - while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & - U300_SYSCON_CSR_PLL208_LOCK_IND)); - - /* Power management enable */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR); - val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR); - - clk_register(); - - /* - * Some of these may be on when we boot the system so make sure they - * are turned OFF. - */ - syscon_block_reset_enable(&timer_clk); - timer_clk.disable(&timer_clk); - - /* - * These shall be turned on by default when we boot the system - * so make sure they are ON. (Adding CPU here is a bit too much.) - * These clocks will be claimed by drivers later. - */ - syscon_block_reset_disable(&semi_clk); - syscon_block_reset_disable(&emif_clk); - clk_enable(&semi_clk); - clk_enable(&emif_clk); - - return 0; -} diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h deleted file mode 100644 index 4f50ca8f901e..000000000000 --- a/arch/arm/mach-u300/clock.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-u300/include/mach/clock.h - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * Copyright (C) 2007-2009 ST-Ericsson AB - * Adopted to ST-Ericsson U300 platforms by - * Jonas Aaberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __MACH_CLOCK_H -#define __MACH_CLOCK_H - -#include - -struct clk { - struct list_head node; - struct module *owner; - struct device *dev; - const char *name; - struct clk *parent; - - spinlock_t lock; - unsigned long rate; - bool reset; - __u16 clk_val; - __s8 usecount; - void __iomem * res_reg; - __u16 res_mask; - - bool hw_ctrld; - - void (*recalc) (struct clk *); - int (*set_rate) (struct clk *, unsigned long); - unsigned long (*get_rate) (struct clk *); - unsigned long (*round_rate) (struct clk *, unsigned long); - void (*init) (struct clk *); - void (*enable) (struct clk *); - void (*disable) (struct clk *); -}; - -int u300_clock_init(void); - -#endif diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 33339745d432..03acf1883ec7 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -44,7 +45,6 @@ #include #include -#include "clock.h" #include "spi.h" #include "i2c.h" #include "u300-gpio.h" @@ -1658,12 +1658,20 @@ void __init u300_init_irq(void) int i; /* initialize clocking early, we want to clock the INTCON */ - u300_clock_init(); + u300_clk_init(U300_SYSCON_VBASE); + + /* Bootstrap EMIF and SEMI clocks */ + clk = clk_get_sys("pl172", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + clk = clk_get_sys("semi", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); /* Clock the interrupt controller */ clk = clk_get_sys("intcon", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); for (i = 0; i < U300_VIC_IRQS_END; i++) set_bit(i, (unsigned long *) &mask[0]); @@ -1811,13 +1819,6 @@ void __init u300_init_devices(void) /* Check what platform we run and print some status information */ u300_init_check_chip(); - /* Set system to run at PLL208, max performance, a known state. */ - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); - val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Wait for the PLL208 to lock if not locked in yet */ - while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) & - U300_SYSCON_CSR_PLL208_LOCK_IND)); /* Initialize SPI device with some board specifics */ u300_spi_init(&pl022_device); diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index bc1c7897e82d..56ac06d38ec1 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -354,7 +354,7 @@ static void __init u300_timer_init(void) /* Clock the interrupt controller */ clk = clk_get_sys("apptimer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); setup_sched_clock(u300_read_sched_clock, 32, rate); diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index b679f117f3cc..35d9fb44c814 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -1,10 +1,11 @@ - +# common clock types obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o # SoCs specific obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_PLAT_SPEAR) += spear/ +obj-$(CONFIG_ARCH_U300) += clk-u300.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c new file mode 100644 index 000000000000..a15f7928fb11 --- /dev/null +++ b/drivers/clk/clk-u300.c @@ -0,0 +1,746 @@ +/* + * U300 clock implementation + * Copyright (C) 2007-2012 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Author: Linus Walleij + * Author: Jonas Aaberg + */ +#include +#include +#include +#include +#include +#include +#include + +/* + * The clocking hierarchy currently looks like this. + * NOTE: the idea is NOT to show how the clocks are routed on the chip! + * The ideas is to show dependencies, so a clock higher up in the + * hierarchy has to be on in order for another clock to be on. Now, + * both CPU and DMA can actually be on top of the hierarchy, and that + * is not modeled currently. Instead we have the backbone AMBA bus on + * top. This bus cannot be programmed in any way but conceptually it + * needs to be active for the bridges and devices to transport data. + * + * Please be aware that a few clocks are hw controlled, which mean that + * the hw itself can turn on/off or change the rate of the clock when + * needed! + * + * AMBA bus + * | + * +- CPU + * +- FSMC NANDIF NAND Flash interface + * +- SEMI Shared Memory interface + * +- ISP Image Signal Processor (U335 only) + * +- CDS (U335 only) + * +- DMA Direct Memory Access Controller + * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL) + * +- APEX + * +- VIDEO_ENC AVE2/3 Video Encoder + * +- XGAM Graphics Accelerator Controller + * +- AHB + * | + * +- ahb:0 AHB Bridge + * | | + * | +- ahb:1 INTCON Interrupt controller + * | +- ahb:3 MSPRO Memory Stick Pro controller + * | +- ahb:4 EMIF External Memory interface + * | + * +- fast:0 FAST bridge + * | | + * | +- fast:1 MMCSD MMC/SD card reader controller + * | +- fast:2 I2S0 PCM I2S channel 0 controller + * | +- fast:3 I2S1 PCM I2S channel 1 controller + * | +- fast:4 I2C0 I2C channel 0 controller + * | +- fast:5 I2C1 I2C channel 1 controller + * | +- fast:6 SPI SPI controller + * | +- fast:7 UART1 Secondary UART (U335 only) + * | + * +- slow:0 SLOW bridge + * | + * +- slow:1 SYSCON (not possible to control) + * +- slow:2 WDOG Watchdog + * +- slow:3 UART0 primary UART + * +- slow:4 TIMER_APP Application timer - used in Linux + * +- slow:5 KEYPAD controller + * +- slow:6 GPIO controller + * +- slow:7 RTC controller + * +- slow:8 BT Bus Tracer (not used currently) + * +- slow:9 EH Event Handler (not used currently) + * +- slow:a TIMER_ACC Access style timer (not used currently) + * +- slow:b PPM (U335 only, what is that?) + */ + +/* Global syscon virtual base */ +static void __iomem *syscon_vbase; + +/** + * struct clk_syscon - U300 syscon clock + * @hw: corresponding clock hardware entry + * @hw_ctrld: whether this clock is hardware controlled (for refcount etc) + * and does not need any magic pokes to be enabled/disabled + * @reset: state holder, whether this block's reset line is asserted or not + * @res_reg: reset line enable/disable flag register + * @res_bit: bit for resetting or taking this consumer out of reset + * @en_reg: clock line enable/disable flag register + * @en_bit: bit for enabling/disabling this consumer clock line + * @clk_val: magic value to poke in the register to enable/disable + * this one clock + */ +struct clk_syscon { + struct clk_hw hw; + bool hw_ctrld; + bool reset; + void __iomem *res_reg; + u8 res_bit; + void __iomem *en_reg; + u8 en_bit; + u16 clk_val; +}; + +#define to_syscon(_hw) container_of(_hw, struct clk_syscon, hw) + +static DEFINE_SPINLOCK(syscon_resetreg_lock); + +/* + * Reset control functions. We remember if a block has been + * taken out of reset and don't remove the reset assertion again + * and vice versa. Currently we only remove resets so the + * enablement function is defined out. + */ +static void syscon_block_reset_enable(struct clk_syscon *sclk) +{ + unsigned long iflags; + u16 val; + + /* Not all blocks support resetting */ + if (!sclk->res_reg) + return; + spin_lock_irqsave(&syscon_resetreg_lock, iflags); + val = readw(sclk->res_reg); + val |= BIT(sclk->res_bit); + writew(val, sclk->res_reg); + spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); + sclk->reset = true; +} + +static void syscon_block_reset_disable(struct clk_syscon *sclk) +{ + unsigned long iflags; + u16 val; + + /* Not all blocks support resetting */ + if (!sclk->res_reg) + return; + spin_lock_irqsave(&syscon_resetreg_lock, iflags); + val = readw(sclk->res_reg); + val &= ~BIT(sclk->res_bit); + writew(val, sclk->res_reg); + spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); + sclk->reset = false; +} + +static int syscon_clk_prepare(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* If the block is in reset, bring it out */ + if (sclk->reset) + syscon_block_reset_disable(sclk); + return 0; +} + +static void syscon_clk_unprepare(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* Please don't force the console into reset */ + if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN) + return; + /* When unpreparing, force block into reset */ + if (!sclk->reset) + syscon_block_reset_enable(sclk); +} + +static int syscon_clk_enable(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* Don't touch the hardware controlled clocks */ + if (sclk->hw_ctrld) + return 0; + /* These cannot be controlled */ + if (sclk->clk_val == 0xFFFFU) + return 0; + + writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCER); + return 0; +} + +static void syscon_clk_disable(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* Don't touch the hardware controlled clocks */ + if (sclk->hw_ctrld) + return; + if (sclk->clk_val == 0xFFFFU) + return; + /* Please don't disable the console port */ + if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN) + return; + + writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCDR); +} + +static int syscon_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + u16 val; + + /* If no enable register defined, it's always-on */ + if (!sclk->en_reg) + return 1; + + val = readw(sclk->en_reg); + val &= BIT(sclk->en_bit); + + return val ? 1 : 0; +} + +static u16 syscon_get_perf(void) +{ + u16 val; + + val = readw(syscon_vbase + U300_SYSCON_CCR); + val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + return val; +} + +static unsigned long +syscon_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_syscon *sclk = to_syscon(hw); + u16 perf = syscon_get_perf(); + + switch(sclk->clk_val) { + case U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN: + case U300_SYSCON_SBCER_I2C0_CLK_EN: + case U300_SYSCON_SBCER_I2C1_CLK_EN: + case U300_SYSCON_SBCER_MMC_CLK_EN: + case U300_SYSCON_SBCER_SPI_CLK_EN: + /* The FAST clocks have one progression */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + default: + return parent_rate; /* 26 MHz */ + } + case U300_SYSCON_SBCER_DMAC_CLK_EN: + case U300_SYSCON_SBCER_NANDIF_CLK_EN: + case U300_SYSCON_SBCER_XGAM_CLK_EN: + /* AMBA interconnect peripherals */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 6500000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 26000000; + default: + return parent_rate; /* 52 MHz */ + } + case U300_SYSCON_SBCER_SEMI_CLK_EN: + case U300_SYSCON_SBCER_EMIF_CLK_EN: + /* EMIF speeds */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 52000000; + default: + return 104000000; + } + case U300_SYSCON_SBCER_CPU_CLK_EN: + /* And the fast CPU clock */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 52000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + return 104000000; + default: + return parent_rate; /* 208 MHz */ + } + default: + /* + * The SLOW clocks and default just inherit the rate of + * their parent (typically PLL13 13 MHz). + */ + return parent_rate; + } +} + +static long +syscon_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_syscon *sclk = to_syscon(hw); + + if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN) + return *prate; + /* We really only support setting the rate of the CPU clock */ + if (rate <= 13000000) + return 13000000; + if (rate <= 52000000) + return 52000000; + if (rate <= 104000000) + return 104000000; + return 208000000; +} + +static int syscon_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_syscon *sclk = to_syscon(hw); + u16 val; + + /* We only support setting the rate of the CPU clock */ + if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN) + return -EINVAL; + switch (rate) { + case 13000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER; + break; + case 52000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE; + break; + case 104000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH; + break; + case 208000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST; + break; + default: + return -EINVAL; + } + val |= readw(syscon_vbase + U300_SYSCON_CCR) & + ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ; + writew(val, syscon_vbase + U300_SYSCON_CCR); + return 0; +} + +static const struct clk_ops syscon_clk_ops = { + .prepare = syscon_clk_prepare, + .unprepare = syscon_clk_unprepare, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .is_enabled = syscon_clk_is_enabled, + .recalc_rate = syscon_clk_recalc_rate, + .round_rate = syscon_clk_round_rate, + .set_rate = syscon_clk_set_rate, +}; + +static struct clk * __init +syscon_clk_register(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + bool hw_ctrld, + void __iomem *res_reg, u8 res_bit, + void __iomem *en_reg, u8 en_bit, + u16 clk_val) +{ + struct clk *clk; + struct clk_syscon *sclk; + struct clk_init_data init; + + sclk = kzalloc(sizeof(struct clk_syscon), GFP_KERNEL); + if (!sclk) { + pr_err("could not allocate syscon clock %s\n", + name); + return ERR_PTR(-ENOMEM); + } + init.name = name; + init.ops = &syscon_clk_ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + sclk->hw.init = &init; + sclk->hw_ctrld = hw_ctrld; + /* Assume the block is in reset at registration */ + sclk->reset = true; + sclk->res_reg = res_reg; + sclk->res_bit = res_bit; + sclk->en_reg = en_reg; + sclk->en_bit = en_bit; + sclk->clk_val = clk_val; + + clk = clk_register(dev, &sclk->hw); + if (IS_ERR(clk)) + kfree(sclk); + + return clk; +} + +/** + * struct clk_mclk - U300 MCLK clock (MMC/SD clock) + * @hw: corresponding clock hardware entry + * @is_mspro: if this is the memory stick clock rather than MMC/SD + */ +struct clk_mclk { + struct clk_hw hw; + bool is_mspro; +}; + +#define to_mclk(_hw) container_of(_hw, struct clk_mclk, hw) + +static int mclk_clk_prepare(struct clk_hw *hw) +{ + struct clk_mclk *mclk = to_mclk(hw); + u16 val; + + /* The MMC and MSPRO clocks need some special set-up */ + if (!mclk->is_mspro) { + /* Set default MMC clock divisor to 18.9 MHz */ + writew(0x0054U, syscon_vbase + U300_SYSCON_MMF0R); + val = readw(syscon_vbase + U300_SYSCON_MMCR); + /* Disable the MMC feedback clock */ + val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; + /* Disable MSPRO frequency */ + val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; + writew(val, syscon_vbase + U300_SYSCON_MMCR); + } else { + val = readw(syscon_vbase + U300_SYSCON_MMCR); + /* Disable the MMC feedback clock */ + val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; + /* Enable MSPRO frequency */ + val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; + writew(val, syscon_vbase + U300_SYSCON_MMCR); + } + + return 0; +} + +static unsigned long +mclk_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u16 perf = syscon_get_perf(); + + switch (perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + /* + * Here, the 208 MHz PLL gets shut down and the always + * on 13 MHz PLL used for RTC etc kicks into use + * instead. + */ + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + { + /* + * This clock is under program control. The register is + * divided in two nybbles, bit 7-4 gives cycles-1 to count + * high, bit 3-0 gives cycles-1 to count low. Distribute + * these with no more than 1 cycle difference between + * low and high and add low and high to get the actual + * divisor. The base PLL is 208 MHz. Writing 0x00 will + * divide by 1 and 1 so the highest frequency possible + * is 104 MHz. + * + * e.g. 0x54 => + * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz + */ + u16 val = readw(syscon_vbase + U300_SYSCON_MMF0R) & + U300_SYSCON_MMF0R_MASK; + switch (val) { + case 0x0054: + return 18900000; + case 0x0044: + return 20800000; + case 0x0043: + return 23100000; + case 0x0033: + return 26000000; + case 0x0032: + return 29700000; + case 0x0022: + return 34700000; + case 0x0021: + return 41600000; + case 0x0011: + return 52000000; + case 0x0000: + return 104000000; + default: + break; + } + } + default: + break; + } + return parent_rate; +} + +static long +mclk_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + if (rate <= 18900000) + return 18900000; + if (rate <= 20800000) + return 20800000; + if (rate <= 23100000) + return 23100000; + if (rate <= 26000000) + return 26000000; + if (rate <= 29700000) + return 29700000; + if (rate <= 34700000) + return 34700000; + if (rate <= 41600000) + return 41600000; + /* Highest rate */ + return 52000000; +} + +static int mclk_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + u16 val; + u16 reg; + + switch (rate) { + case 18900000: + val = 0x0054; + break; + case 20800000: + val = 0x0044; + break; + case 23100000: + val = 0x0043; + break; + case 26000000: + val = 0x0033; + break; + case 29700000: + val = 0x0032; + break; + case 34700000: + val = 0x0022; + break; + case 41600000: + val = 0x0021; + break; + case 52000000: + val = 0x0011; + break; + case 104000000: + val = 0x0000; + break; + default: + return -EINVAL; + } + + reg = readw(syscon_vbase + U300_SYSCON_MMF0R) & + ~U300_SYSCON_MMF0R_MASK; + writew(reg | val, syscon_vbase + U300_SYSCON_MMF0R); + return 0; +} + +static const struct clk_ops mclk_ops = { + .prepare = mclk_clk_prepare, + .recalc_rate = mclk_clk_recalc_rate, + .round_rate = mclk_clk_round_rate, + .set_rate = mclk_clk_set_rate, +}; + +static struct clk * __init +mclk_clk_register(struct device *dev, const char *name, + const char *parent_name, bool is_mspro) +{ + struct clk *clk; + struct clk_mclk *mclk; + struct clk_init_data init; + + mclk = kzalloc(sizeof(struct clk_mclk), GFP_KERNEL); + if (!mclk) { + pr_err("could not allocate MMC/SD clock %s\n", + name); + return ERR_PTR(-ENOMEM); + } + init.name = "mclk"; + init.ops = &mclk_ops; + init.flags = 0; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + mclk->hw.init = &init; + mclk->is_mspro = is_mspro; + + clk = clk_register(dev, &mclk->hw); + if (IS_ERR(clk)) + kfree(mclk); + + return clk; +} + +void __init u300_clk_init(void __iomem *base) +{ + u16 val; + struct clk *clk; + + syscon_vbase = base; + + /* Set system to run at PLL208, max performance, a known state. */ + val = readw(syscon_vbase + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + writew(val, syscon_vbase + U300_SYSCON_CCR); + /* Wait for the PLL208 to lock if not locked in yet */ + while (!(readw(syscon_vbase + U300_SYSCON_CSR) & + U300_SYSCON_CSR_PLL208_LOCK_IND)); + + /* Power management enable */ + val = readw(syscon_vbase + U300_SYSCON_PMCR); + val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; + writew(val, syscon_vbase + U300_SYSCON_PMCR); + + /* These are always available (RTC and PLL13) */ + clk = clk_register_fixed_rate(NULL, "app_32_clk", NULL, + CLK_IS_ROOT, 32768); + /* The watchdog sits directly on the 32 kHz clock */ + clk_register_clkdev(clk, NULL, "coh901327_wdog"); + clk = clk_register_fixed_rate(NULL, "pll13", NULL, + CLK_IS_ROOT, 13000000); + + /* These derive from PLL208 */ + clk = clk_register_fixed_rate(NULL, "pll208", NULL, + CLK_IS_ROOT, 208000000); + clk = clk_register_fixed_factor(NULL, "app_208_clk", "pll208", + 0, 1, 1); + clk = clk_register_fixed_factor(NULL, "app_104_clk", "pll208", + 0, 1, 2); + clk = clk_register_fixed_factor(NULL, "app_52_clk", "pll208", + 0, 1, 4); + /* The 52 MHz is divided down to 26 MHz */ + clk = clk_register_fixed_factor(NULL, "app_26_clk", "app_52_clk", + 0, 1, 2); + + /* Directly on the AMBA interconnect */ + clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 3, + syscon_vbase + U300_SYSCON_CERR, 3, + U300_SYSCON_SBCER_CPU_CLK_EN); + clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 4, + syscon_vbase + U300_SYSCON_CERR, 4, + U300_SYSCON_SBCER_DMAC_CLK_EN); + clk_register_clkdev(clk, NULL, "dma"); + clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 6, + syscon_vbase + U300_SYSCON_CERR, 6, + U300_SYSCON_SBCER_NANDIF_CLK_EN); + clk_register_clkdev(clk, NULL, "fsmc-nand"); + clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 8, + syscon_vbase + U300_SYSCON_CERR, 8, + U300_SYSCON_SBCER_XGAM_CLK_EN); + clk_register_clkdev(clk, NULL, "xgam"); + clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 9, + syscon_vbase + U300_SYSCON_CERR, 9, + U300_SYSCON_SBCER_SEMI_CLK_EN); + clk_register_clkdev(clk, NULL, "semi"); + + /* AHB bridge clocks */ + clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 10, + syscon_vbase + U300_SYSCON_CERR, 10, + U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN); + clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 12, + syscon_vbase + U300_SYSCON_CERR, 12, + /* Cannot be enabled, just taken out of reset */ + 0xFFFFU); + clk_register_clkdev(clk, NULL, "intcon"); + clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 5, + syscon_vbase + U300_SYSCON_CERR, 5, + U300_SYSCON_SBCER_EMIF_CLK_EN); + clk_register_clkdev(clk, NULL, "pl172"); + + /* FAST bridge clocks */ + clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true, + syscon_vbase + U300_SYSCON_RFR, 0, + syscon_vbase + U300_SYSCON_CEFR, 0, + U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN); + clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 1, + syscon_vbase + U300_SYSCON_CEFR, 1, + U300_SYSCON_SBCER_I2C0_CLK_EN); + clk_register_clkdev(clk, NULL, "stu300.0"); + clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 2, + syscon_vbase + U300_SYSCON_CEFR, 2, + U300_SYSCON_SBCER_I2C1_CLK_EN); + clk_register_clkdev(clk, NULL, "stu300.1"); + clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 5, + syscon_vbase + U300_SYSCON_CEFR, 5, + U300_SYSCON_SBCER_MMC_CLK_EN); + clk_register_clkdev(clk, "apb_pclk", "mmci"); + clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 6, + syscon_vbase + U300_SYSCON_CEFR, 6, + U300_SYSCON_SBCER_SPI_CLK_EN); + /* The SPI has no external clock for the outward bus, uses the pclk */ + clk_register_clkdev(clk, NULL, "pl022"); + clk_register_clkdev(clk, "apb_pclk", "pl022"); + + /* SLOW bridge clocks */ + clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true, + syscon_vbase + U300_SYSCON_RSR, 0, + syscon_vbase + U300_SYSCON_CESR, 0, + U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN); + clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 1, + syscon_vbase + U300_SYSCON_CESR, 1, + U300_SYSCON_SBCER_UART_CLK_EN); + /* Same clock is used for APB and outward bus */ + clk_register_clkdev(clk, NULL, "uart0"); + clk_register_clkdev(clk, "apb_pclk", "uart0"); + clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 4, + syscon_vbase + U300_SYSCON_CESR, 4, + U300_SYSCON_SBCER_GPIO_CLK_EN); + clk_register_clkdev(clk, NULL, "u300-gpio"); + clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 5, + syscon_vbase + U300_SYSCON_CESR, 6, + U300_SYSCON_SBCER_KEYPAD_CLK_EN); + clk_register_clkdev(clk, NULL, "coh901461-keypad"); + clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true, + syscon_vbase + U300_SYSCON_RSR, 6, + /* No clock enable register bit */ + NULL, 0, 0xFFFFU); + clk_register_clkdev(clk, NULL, "rtc-coh901331"); + clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 7, + syscon_vbase + U300_SYSCON_CESR, 7, + U300_SYSCON_SBCER_APP_TMR_CLK_EN); + clk_register_clkdev(clk, NULL, "apptimer"); + clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 8, + syscon_vbase + U300_SYSCON_CESR, 8, + U300_SYSCON_SBCER_ACC_TMR_CLK_EN); + clk_register_clkdev(clk, NULL, "timer"); + + /* Then this special MMC/SD clock */ + clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false); + clk_register_clkdev(clk, NULL, "mmci"); +} diff --git a/include/linux/platform_data/clk-u300.h b/include/linux/platform_data/clk-u300.h new file mode 100644 index 000000000000..8429e73911a1 --- /dev/null +++ b/include/linux/platform_data/clk-u300.h @@ -0,0 +1 @@ +void __init u300_clk_init(void __iomem *base); -- cgit v1.2.3 From a613163dff04cbfcb7d66b06ef4a5f65498ee59b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 11 Jun 2012 17:33:12 +0200 Subject: ARM: integrator: convert to common clock This converts the Integrator platform to use common clock and the ICST driver. Since from this point not all ARM reference platforms use the clock, we define CONFIG_PLAT_VERSATILE_CLOCK and select it for all platforms except the Integrator. Open issue: I could not use the .init_early() field of the machine descriptor to initialize the clocks, but had to move them to .init_irq(), so presumably .init_early() is so early that common clock is not up, and .init_machine() is too late since it's needed for the clockevent/clocksource initialization. Any suggestions on how to solve this is very welcome. Cc: Russell King Signed-off-by: Linus Walleij [mturquette@linaro.org: use 'select' instead of versatile Kconfig] Signed-off-by: Mike Turquette --- arch/arm/Kconfig | 7 +- arch/arm/mach-integrator/core.c | 45 ---------- arch/arm/mach-integrator/include/mach/clkdev.h | 26 ------ arch/arm/mach-integrator/integrator_ap.c | 8 +- arch/arm/mach-integrator/integrator_cp.c | 63 +------------- arch/arm/plat-versatile/Kconfig | 3 + arch/arm/plat-versatile/Makefile | 2 +- drivers/clk/versatile/Makefile | 1 + drivers/clk/versatile/clk-integrator.c | 111 +++++++++++++++++++++++++ include/linux/platform_data/clk-integrator.h | 1 + 10 files changed, 131 insertions(+), 136 deletions(-) delete mode 100644 arch/arm/mach-integrator/include/mach/clkdev.h create mode 100644 drivers/clk/versatile/clk-integrator.c create mode 100644 include/linux/platform_data/clk-integrator.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c59853738967..6f8cf405d3ec 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -254,8 +254,8 @@ config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA select ARCH_HAS_CPUFREQ - select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK + select CLK_VERSATILE select HAVE_TCM select ICST select GENERIC_CLOCKEVENTS @@ -277,6 +277,7 @@ config ARCH_REALVIEW select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB @@ -295,6 +296,7 @@ config ARCH_VERSATILE select ARCH_WANT_OPTIONAL_GPIOLIB select NEED_MACH_IO_H if PCI select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_FPGA_IRQ select ARM_TIMER_SP804 @@ -314,6 +316,7 @@ config ARCH_VEXPRESS select ICST select NO_IOPORT select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD help This enables support for the ARM Ltd Versatile Express boards. diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 2a20bba246fb..ebf680bebdf2 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include @@ -61,50 +60,6 @@ static struct amba_device *amba_devs[] __initdata = { &kmi1_device, }; -/* - * These are fixed clocks. - */ -static struct clk clk24mhz = { - .rate = 24000000, -}; - -static struct clk uartclk = { - .rate = 14745600, -}; - -static struct clk dummy_apb_pclk; - -static struct clk_lookup lookups[] = { - { /* Bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { - /* Integrator/AP timer frequency */ - .dev_id = "ap_timer", - .clk = &clk24mhz, - }, { /* UART0 */ - .dev_id = "uart0", - .clk = &uartclk, - }, { /* UART1 */ - .dev_id = "uart1", - .clk = &uartclk, - }, { /* KMI0 */ - .dev_id = "kmi0", - .clk = &clk24mhz, - }, { /* KMI1 */ - .dev_id = "kmi1", - .clk = &clk24mhz, - }, { /* MMCI - IntegratorCP */ - .dev_id = "mmci", - .clk = &uartclk, - } -}; - -void __init integrator_init_early(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} - static int __init integrator_init(void) { int i; diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h deleted file mode 100644 index bfe07679faec..000000000000 --- a/arch/arm/mach-integrator/include/mach/clkdev.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#include -#include - -struct clk { - unsigned long rate; - const struct clk_ops *ops; - struct module *owner; - const struct icst_params *params; - void __iomem *vcoreg; - void *data; -}; - -static inline int __clk_get(struct clk *clk) -{ - return try_module_get(clk->owner); -} - -static inline void __clk_put(struct clk *clk) -{ - module_put(clk->owner); -} - -#endif diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index c857501c5783..7b1055c8e0b9 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -33,6 +33,7 @@ #include #include #include +#include #include