From 577e5b8c3924539c7a09e3e00477534f39e61829 Mon Sep 17 00:00:00 2001 From: Shaul Triebitz Date: Wed, 8 Jun 2022 12:01:12 +0300 Subject: wifi: cfg80211: add API to add/modify/remove a link station Add an API for adding/modifying/removing a link of a station. Signed-off-by: Shaul Triebitz Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 7bb1ae59f3a5..37bfc934325a 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1254,6 +1254,10 @@ * without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links * in preparation for e.g. roaming to a regular (non-MLO) AP. * + * @NL80211_CMD_ADD_LINK_STA: Add a link to an MLD station + * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station + * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1501,6 +1505,10 @@ enum nl80211_commands { NL80211_CMD_ADD_LINK, NL80211_CMD_REMOVE_LINK, + NL80211_CMD_ADD_LINK_STA, + NL80211_CMD_MODIFY_LINK_STA, + NL80211_CMD_REMOVE_LINK_STA, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -- cgit v1.2.3 From 4e9c3af398207d95957ae6c25290891574f2d7e8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 4 Jul 2022 15:02:33 +0200 Subject: wifi: nl80211: add EML/MLD capabilities to per-iftype capabilities We have the per-interface type capabilities, currently for extended capabilities, add the EML/MLD capabilities there to have this advertised by the driver. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++++ include/uapi/linux/nl80211.h | 12 ++++++++++-- net/wireless/nl80211.c | 9 +++++++++ 3 files changed, 23 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f9ea49e67164..bc960646973b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -4993,12 +4993,16 @@ struct wiphy_vendor_command { * 802.11-2012 8.4.2.29 for the defined fields. * @extended_capabilities_mask: mask of the valid values * @extended_capabilities_len: length of the extended capabilities + * @eml_capabilities: EML capabilities (for MLO) + * @mld_capa_and_ops: MLD capabilities and operations (for MLO) */ struct wiphy_iftype_ext_capab { enum nl80211_iftype iftype; const u8 *extended_capabilities; const u8 *extended_capabilities_mask; u8 extended_capabilities_len; + u16 eml_capabilities; + u16 mld_capa_and_ops; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 37bfc934325a..3fa586e38f88 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2368,8 +2368,10 @@ enum nl80211_commands { * * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, - * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per - * interface type. + * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities and + * other interface-type specific capabilities per interface type. For MLO, + * %NL80211_ATTR_EML_CAPABILITY and %NL80211_ATTR_MLD_CAPA_AND_OPS are + * present. * * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO * groupID for monitor mode. @@ -2709,6 +2711,9 @@ enum nl80211_commands { * suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum * number prior to the introduction of this attribute. * + * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16) + * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16) + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3231,6 +3236,9 @@ enum nl80211_attrs { NL80211_ATTR_MAX_NUM_AKM_SUITES, + NL80211_ATTR_EML_CAPABILITY, + NL80211_ATTR_MLD_CAPA_AND_OPS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 37ec8b3897b4..35fb2b0517d9 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2867,6 +2867,15 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev, capab->extended_capabilities_mask)) goto nla_put_failure; + if (rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_MLO && + (nla_put_u16(msg, + NL80211_ATTR_EML_CAPABILITY, + capab->eml_capabilities) || + nla_put_u16(msg, + NL80211_ATTR_MLD_CAPA_AND_OPS, + capab->mld_capa_and_ops))) + goto nla_put_failure; + nla_nest_end(msg, nested_ext_capab); if (state->split) break; -- cgit v1.2.3 From 9dd1953846c7cd58100a5c6bd90db54e2c60668a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 19 Jul 2022 10:26:50 +0200 Subject: wifi: nl80211/mac80211: clarify link ID in control port TX Clarify the link ID behaviour in control port TX, we need it to select the link to transmit on for both MLD and non-MLD receivers, but select the link address as the SA only if the receiver is not an MLD. Fixes: 67207bab9341 ("wifi: cfg80211/mac80211: Support control port TX from specific link") Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 6 ++++++ net/mac80211/tx.c | 43 +++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 47 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 3fa586e38f88..d4d6ba585b41 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1119,6 +1119,12 @@ * has been received. %NL80211_ATTR_FRAME is used to specify the * frame contents. The frame is the raw EAPoL data, without ethernet or * 802.11 headers. + * For an MLD transmitter, the %NL80211_ATTR_MLO_LINK_ID may be given and + * its effect will depend on the destination: If the destination is known + * to be an MLD, this will be used as a hint to select the link to transmit + * the frame on. If the destination is not an MLD, this will select both + * the link to transmit on and the source address will be set to the link + * address of that link. * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added * indicating the protocol type of the received frame; whether the frame diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 772108c2cc6b..06ec152e8188 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2896,9 +2896,35 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata, info->flags = info_flags; info->ack_frame_id = info_id; info->band = band; - info->control.flags = ctrl_flags | - u32_encode_bits(link_id, + + if (likely(!cookie)) { + ctrl_flags |= u32_encode_bits(link_id, IEEE80211_TX_CTRL_MLO_LINK); + } else { + unsigned int pre_conf_link_id; + + /* + * ctrl_flags already have been set by + * ieee80211_tx_control_port(), here + * we just sanity check that + */ + + pre_conf_link_id = u32_get_bits(ctrl_flags, + IEEE80211_TX_CTRL_MLO_LINK); + + if (pre_conf_link_id != link_id && + link_id != IEEE80211_LINK_UNSPECIFIED) { +#ifdef CPTCFG_MAC80211_VERBOSE_DEBUG + net_info_ratelimited("%s: dropped frame to %pM with bad link ID request (%d vs. %d)\n", + sdata->name, hdr.addr1, + pre_conf_link_id, link_id); +#endif + ret = -EINVAL; + goto free; + } + } + + info->control.flags = ctrl_flags; return skb; free: @@ -5745,11 +5771,17 @@ int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev, ehdr = skb_push(skb, sizeof(struct ethhdr)); memcpy(ehdr->h_dest, dest, ETH_ALEN); + /* we may override the SA for MLO STA later */ if (link_id < 0) { + ctrl_flags |= u32_encode_bits(IEEE80211_LINK_UNSPECIFIED, + IEEE80211_TX_CTRL_MLO_LINK); memcpy(ehdr->h_source, sdata->vif.addr, ETH_ALEN); } else { struct ieee80211_bss_conf *link_conf; + ctrl_flags |= u32_encode_bits(link_id, + IEEE80211_TX_CTRL_MLO_LINK); + rcu_read_lock(); link_conf = rcu_dereference(sdata->vif.link_conf[link_id]); if (!link_conf) { @@ -5784,6 +5816,13 @@ int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev, skb_set_queue_mapping(skb, queue); skb_get_hash(skb); + + /* + * for MLO STA, the SA should be the AP MLD address, but + * the link ID has been selected already + */ + if (sta->sta.mlo) + memcpy(ehdr->h_source, sdata->vif.addr, ETH_ALEN); } rcu_read_unlock(); -- cgit v1.2.3 From 80b0ed70a271d375feb2286696ca8af147a035cf Mon Sep 17 00:00:00 2001 From: Avraham Stern Date: Wed, 26 Jan 2022 16:06:35 +0200 Subject: wifi: nl80211: add RX and TX timestamp attributes Add attributes for reporting hardware timestamps for management frames RX and TX. These attributes will be used for reporting hardware timestamps for Timing measurement and Fine Timing Measurement action frames, which will allow userspace applications to measure the path delay between devices and sync clocks. For TX, these attributes are used for reporting the frame RX time and the ack TX time. For TX, they are used for reporting the frame TX time and the ack RX time. Signed-off-by: Avraham Stern Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d4d6ba585b41..5275dcbc5ee8 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -764,6 +764,9 @@ * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA * counters which will be updated to the current value. This attribute * is used during CSA period. + * For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may + * be included to indicate the ack TX timestamp. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. This command is @@ -774,7 +777,9 @@ * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies * the TX command and %NL80211_ATTR_FRAME includes the contents of the * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged - * the frame. + * the frame. %NL80211_ATTR_TX_HW_TIMESTAMP may be included to indicate the + * tx timestamp and %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the ack RX timestamp. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. * @@ -2720,6 +2725,18 @@ enum nl80211_commands { * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16) * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16) * + * @NL80211_ATTR_TX_HW_TIMESTAMP: Hardware timestamp for TX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the frame TX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the ack TX timestamp. + * @NL80211_ATTR_RX_HW_TIMESTAMP: Hardware timestamp for RX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the incoming frame RX timestamp. * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3245,6 +3262,9 @@ enum nl80211_attrs { NL80211_ATTR_EML_CAPABILITY, NL80211_ATTR_MLD_CAPA_AND_OPS, + NL80211_ATTR_TX_HW_TIMESTAMP, + NL80211_ATTR_RX_HW_TIMESTAMP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 95f498bb49f7030c1f40236107e5241e50f79ade Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 18 Jul 2022 12:13:46 +0200 Subject: wifi: nl80211: add MLO link ID to the NL80211_CMD_FRAME TX API Allow optionally specifying the link ID to transmit on, which can be done instead of the link frequency, on an MLD addressed frame. Both can also be omitted in which case the frame must be MLD addressed and link selection (and address translation) will be done on lower layers. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++++ include/uapi/linux/nl80211.h | 4 ++++ net/wireless/nl80211.c | 12 ++++++++++++ 3 files changed, 20 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8545ed098d90..908d58393484 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3411,6 +3411,9 @@ struct cfg80211_update_ft_ies_params { * @dont_wait_for_ack: tells the low level not to wait for an ack * @n_csa_offsets: length of csa_offsets array * @csa_offsets: array of all the csa offsets in the frame + * @link_id: for MLO, the link ID to transmit on, -1 if not given; note + * that the link ID isn't validated (much), it's in range but the + * link might not exist (or be used by the receiver STA) */ struct cfg80211_mgmt_tx_params { struct ieee80211_channel *chan; @@ -3422,6 +3425,7 @@ struct cfg80211_mgmt_tx_params { bool dont_wait_for_ack; int n_csa_offsets; const u16 *csa_offsets; + int link_id; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5275dcbc5ee8..ffb7c573e299 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -764,6 +764,10 @@ * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA * counters which will be updated to the current value. This attribute * is used during CSA period. + * For TX on an MLD, the frequency can be omitted and the link ID be + * specified, or if transmitting to a known peer MLD (with MLD addresses + * in the frame) both can be omitted and the link will be selected by + * lower layers. * For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to * indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may * be included to indicate the ack TX timestamp. diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 60b8406b8d7e..2705e3ee8fc4 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -12256,6 +12256,18 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info) wdev_unlock(wdev); return -EBUSY; } + + params.link_id = nl80211_link_id_or_invalid(info->attrs); + /* + * This now races due to the unlock, but we cannot check + * the valid links for the _station_ anyway, so that's up + * to the driver. + */ + if (params.link_id >= 0 && + !(wdev->valid_links & BIT(params.link_id))) { + wdev_unlock(wdev); + return -EINVAL; + } wdev_unlock(wdev); params.buf = nla_data(info->attrs[NL80211_ATTR_FRAME]); -- cgit v1.2.3