Merge tag 'v3.6-rc1' into staging/for_v3.6

Linux 3.6-rc1

* tag 'v3.6-rc1': (18733 commits)
  Linux 3.6-rc1
  mm: remove node_start_pfn checking in new WARN_ON for now
  ARM: mmp: add missing irqs.h
  arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs
  ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes
  libceph: fix crypto key null deref, memory leak
  ceph: simplify+fix atomic_open
  sh: explicitly include sh_dma.h in setup-sh7722.c
  um: Add arch/x86/um to MAINTAINERS
  um: pass siginfo to guest process
  um: fix ubd_file_size for read-only files
  md/dm-raid: DM_RAID should select MD_RAID10
  md/raid1: submit IO from originating thread instead of md thread.
  raid5: raid5d handle stripe in batch way
  raid5: make_request use batch stripe release
  um: pull interrupt_end() into userspace()
  um: split syscall_trace(), pass pt_regs to it
  um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regs
  MIPS: Loongson 2: Sort out clock managment.
  locks: remove unused lm_release_private
  ...

21 files changed, 744 insertions, 35 deletions

diff --git a/include/linux/platform_data/ad7266.h b/include/linux/platform_data/ad7266.h
new file mode 100644
index 000000000000..eabfdcb26992
--- /dev/null
+++ b/include/linux/platform_data/ad7266.h
@@ -0,0 +1,54 @@
+/*
+ * AD7266/65 SPI ADC driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __IIO_ADC_AD7266_H__
+#define __IIO_ADC_AD7266_H__
+
+/**
+ * enum ad7266_range - AD7266 reference voltage range
+ * @AD7266_RANGE_VREF: Device is configured for input range 0V - VREF
+ *			(RANGE pin set to low)
+ * @AD7266_RANGE_2VREF: Device is configured for input range 0V - 2VREF
+ *			(RANGE pin set to high)
+ */
+enum ad7266_range {
+	AD7266_RANGE_VREF,
+	AD7266_RANGE_2VREF,
+};
+
+/**
+ * enum ad7266_mode - AD7266 sample mode
+ * @AD7266_MODE_DIFF: Device is configured for full differential mode
+ *				(SGL/DIFF pin set to low, AD0 pin set to low)
+ * @AD7266_MODE_PSEUDO_DIFF: Device is configured for pseudo differential mode
+ *				(SGL/DIFF pin set to low, AD0 pin set to high)
+ * @AD7266_MODE_SINGLE_ENDED: Device is configured for single-ended mode
+ *				(SGL/DIFF pin set to high)
+ */
+enum ad7266_mode {
+	AD7266_MODE_DIFF,
+	AD7266_MODE_PSEUDO_DIFF,
+	AD7266_MODE_SINGLE_ENDED,
+};
+
+/**
+ * struct ad7266_platform_data - Platform data for the AD7266 driver
+ * @range: Reference voltage range the device is configured for
+ * @mode: Sample mode the device is configured for
+ * @fixed_addr: Whether the address pins are hard-wired
+ * @addr_gpios: GPIOs used for controlling the address pins, only used if
+ *		fixed_addr is set to false.
+ */
+struct ad7266_platform_data {
+	enum ad7266_range range;
+	enum ad7266_mode mode;
+	bool fixed_addr;
+	unsigned int addr_gpios[3];
+};
+
+#endif
diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h
new file mode 100644
index 000000000000..e15745b4f3a5
--- /dev/null
+++ b/include/linux/platform_data/at91_adc.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2011 Free Electrons
+ *
+ * Licensed under the GPLv2 or later.
+ */
+
+#ifndef _AT91_ADC_H_
+#define _AT91_ADC_H_
+
+/**
+ * struct at91_adc_reg_desc - Various informations relative to registers
+ * @channel_base:	Base offset for the channel data registers
+ * @drdy_mask:		Mask of the DRDY field in the relevant registers
+			(Interruptions registers mostly)
+ * @status_register:	Offset of the Interrupt Status Register
+ * @trigger_register:	Offset of the Trigger setup register
+ */
+struct at91_adc_reg_desc {
+	u8	channel_base;
+	u32	drdy_mask;
+	u8	status_register;
+	u8	trigger_register;
+};
+
+/**
+ * struct at91_adc_trigger - description of triggers
+ * @name:		name of the trigger advertised to the user
+ * @value:		value to set in the ADC's trigger setup register
+			to enable the trigger
+ * @is_external:	Does the trigger rely on an external pin?
+ */
+struct at91_adc_trigger {
+	const char	*name;
+	u8		value;
+	bool		is_external;
+};
+
+/**
+ * struct at91_adc_data - platform data for ADC driver
+ * @channels_used:		channels in use on the board as a bitmask
+ * @num_channels:		global number of channels available on the board
+ * @registers:			Registers definition on the board
+ * @startup_time:		startup time of the ADC in microseconds
+ * @trigger_list:		Triggers available in the ADC
+ * @trigger_number:		Number of triggers available in the ADC
+ * @use_external_triggers:	does the board has external triggers availables
+ * @vref:			Reference voltage for the ADC in millivolts
+ */
+struct at91_adc_data {
+	unsigned long			channels_used;
+	u8				num_channels;
+	struct at91_adc_reg_desc	*registers;
+	u8				startup_time;
+	struct at91_adc_trigger		*trigger_list;
+	u8				trigger_number;
+	bool				use_external_triggers;
+	u16				vref;
+};
+
+extern void __init at91_add_device_adc(struct at91_adc_data *data);
+#endif
diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h
new file mode 100644
index 000000000000..e7a1949bad26
--- /dev/null
+++ b/include/linux/platform_data/atmel-aes.h
@@ -0,0 +1,22 @@
+#ifndef __LINUX_ATMEL_AES_H
+#define __LINUX_ATMEL_AES_H
+
+#include <mach/at_hdmac.h>
+
+/**
+ * struct aes_dma_data - DMA data for AES
+ */
+struct aes_dma_data {
+	struct at_dma_slave	txdata;
+	struct at_dma_slave	rxdata;
+};
+
+/**
+ * struct aes_platform_data - board-specific AES configuration
+ * @dma_slave: DMA slave interface to use in data transfers.
+ */
+struct aes_platform_data {
+	struct aes_dma_data	*dma_slave;
+};
+
+#endif /* __LINUX_ATMEL_AES_H */
diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h
new file mode 100644
index 000000000000..83fe9c283bb8
--- /dev/null
+++ b/include/linux/platform_data/clk-integrator.h
@@ -0,0 +1 @@
+void integrator_clk_init(bool is_cp);
diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h
new file mode 100644
index 000000000000..5713c87b2477
--- /dev/null
+++ b/include/linux/platform_data/clk-nomadik.h
@@ -0,0 +1,2 @@
+/* Minimal platform data header */
+void nomadik_clk_init(void);
diff --git a/include/linux/platform_data/clk-u300.h b/include/linux/platform_data/clk-u300.h
new file mode 100644
index 000000000000..8429e73911a1
--- /dev/null
+++ b/include/linux/platform_data/clk-u300.h
@@ -0,0 +1 @@
+void __init u300_clk_init(void __iomem *base);
diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h
new file mode 100644
index 000000000000..5c15a738e116
--- /dev/null
+++ b/include/linux/platform_data/ehci-sh.h
@@ -0,0 +1,28 @@
+/*
+ * EHCI SuperH driver platform data
+ *
+ * Copyright (C) 2012  Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __USB_EHCI_SH_H
+#define __USB_EHCI_SH_H
+
+struct ehci_sh_platdata {
+	void (*phy_init)(void); /* Phy init function */
+};
+
+#endif /* __USB_EHCI_SH_H */
diff --git a/include/linux/platform_data/emif_plat.h b/include/linux/platform_data/emif_plat.h
new file mode 100644
index 000000000000..03378ca84061
--- /dev/null
+++ b/include/linux/platform_data/emif_plat.h
@@ -0,0 +1,128 @@
+/*
+ * Definitions for TI EMIF device platform data
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __EMIF_PLAT_H
+#define __EMIF_PLAT_H
+
+/* Low power modes - EMIF_PWR_MGMT_CTRL */
+#define EMIF_LP_MODE_DISABLE				0
+#define EMIF_LP_MODE_CLOCK_STOP				1
+#define EMIF_LP_MODE_SELF_REFRESH			2
+#define EMIF_LP_MODE_PWR_DN				4
+
+/* Hardware capabilities */
+#define	EMIF_HW_CAPS_LL_INTERFACE			0x00000001
+
+/*
+ * EMIF IP Revisions
+ *	EMIF4D  - Used in OMAP4
+ *	EMIF4D5 - Used in OMAP5
+ */
+#define	EMIF_4D						1
+#define	EMIF_4D5					2
+
+/*
+ * PHY types
+ *	ATTILAPHY  - Used in OMAP4
+ *	INTELLIPHY - Used in OMAP5
+ */
+#define	EMIF_PHY_TYPE_ATTILAPHY				1
+#define	EMIF_PHY_TYPE_INTELLIPHY			2
+
+/* Custom config requests */
+#define EMIF_CUSTOM_CONFIG_LPMODE			0x00000001
+#define EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL	0x00000002
+
+#ifndef __ASSEMBLY__
+/**
+ * struct ddr_device_info - All information about the DDR device except AC
+ *		timing parameters
+ * @type:	Device type (LPDDR2-S4, LPDDR2-S2 etc)
+ * @density:	Device density
+ * @io_width:	Bus width
+ * @cs1_used:	Whether there is a DDR device attached to the second
+ *		chip-select(CS1) of this EMIF instance
+ * @cal_resistors_per_cs: Whether there is one calibration resistor per
+ *		chip-select or whether it's a single one for both
+ * @manufacturer: Manufacturer name string
+ */
+struct ddr_device_info {
+	u32	type;
+	u32	density;
+	u32	io_width;
+	u32	cs1_used;
+	u32	cal_resistors_per_cs;
+	char	manufacturer[10];
+};
+
+/**
+ * struct emif_custom_configs - Custom configuration parameters/policies
+ *		passed from the platform layer
+ * @mask:	Mask to indicate which configs are requested
+ * @lpmode:	LPMODE to be used in PWR_MGMT_CTRL register
+ * @lpmode_timeout_performance: Timeout before LPMODE entry when higher
+ *		performance is desired at the cost of power (typically
+ *		at higher OPPs)
+ * @lpmode_timeout_power: Timeout before LPMODE entry when better power
+ *		savings is desired and performance is not important
+ *		(typically at lower loads indicated by lower OPPs)
+ * @lpmode_freq_threshold: The DDR frequency threshold to identify between
+ *		the above two cases:
+ *		timeout = (freq >= lpmode_freq_threshold) ?
+ *			lpmode_timeout_performance :
+ *			lpmode_timeout_power;
+ * @temp_alert_poll_interval_ms: LPDDR2 MR4 polling interval at nominal
+ *		temperature(in milliseconds). When temperature is high
+ *		polling is done 4 times as frequently.
+ */
+struct emif_custom_configs {
+	u32 mask;
+	u32 lpmode;
+	u32 lpmode_timeout_performance;
+	u32 lpmode_timeout_power;
+	u32 lpmode_freq_threshold;
+	u32 temp_alert_poll_interval_ms;
+};
+
+/**
+ * struct emif_platform_data - Platform data passed on EMIF platform
+ *				device creation. Used by the driver.
+ * @hw_caps:		Hw capabilities of the EMIF IP in the respective SoC
+ * @device_info:	Device info structure containing information such
+ *			as type, bus width, density etc
+ * @timings:		Timings information from device datasheet passed
+ *			as an array of 'struct lpddr2_timings'. Can be NULL
+ *			if if default timings are ok
+ * @timings_arr_size:	Size of the timings array. Depends on the number
+ *			of different frequencies for which timings data
+ *			is provided
+ * @min_tck:		Minimum value of some timing parameters in terms
+ *			of number of cycles. Can be NULL if default values
+ *			are ok
+ * @custom_configs:	Custom configurations requested by SoC or board
+ *			code and the data for them. Can be NULL if default
+ *			configurations done by the driver are ok. See
+ *			documentation for 'struct emif_custom_configs' for
+ *			more details
+ */
+struct emif_platform_data {
+	u32 hw_caps;
+	struct ddr_device_info *device_info;
+	const struct lpddr2_timings *timings;
+	u32 timings_arr_size;
+	const struct lpddr2_min_tck *min_tck;
+	struct emif_custom_configs *custom_configs;
+	u32 ip_rev;
+	u32 phy_type;
+};
+#endif /* __ASSEMBLY__ */
+
+#endif /* __LINUX_EMIF_H */
diff --git a/include/linux/platform_data/gpio-em.h b/include/linux/platform_data/gpio-em.h
new file mode 100644
index 000000000000..573edfb046c4
--- /dev/null
+++ b/include/linux/platform_data/gpio-em.h
@@ -0,0 +1,10 @@
+#ifndef __GPIO_EM_H__
+#define __GPIO_EM_H__
+
+struct gpio_em_config {
+	unsigned int gpio_base;
+	unsigned int irq_base;
+	unsigned int number_of_pins;
+};
+
+#endif /* __GPIO_EM_H__ */
diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h
new file mode 100644
index 000000000000..c2303c3e4803
--- /dev/null
+++ b/include/linux/platform_data/i2c-nomadik.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PDATA_I2C_NOMADIK_H
+#define __PDATA_I2C_NOMADIK_H
+
+enum i2c_freq_mode {
+	I2C_FREQ_MODE_STANDARD,		/* up to 100 Kb/s */
+	I2C_FREQ_MODE_FAST,		/* up to 400 Kb/s */
+	I2C_FREQ_MODE_HIGH_SPEED,	/* up to 3.4 Mb/s */
+	I2C_FREQ_MODE_FAST_PLUS,	/* up to 1 Mb/s */
+};
+
+/**
+ * struct nmk_i2c_controller - client specific controller configuration
+ * @clk_freq:	clock frequency for the operation mode
+ * @slsu:	Slave data setup time in ns.
+ *		The needed setup time for three modes of operation
+ *		are 250ns, 100ns and 10ns respectively thus leading
+ *		to the values of 14, 6, 2 for a 48 MHz i2c clk
+ * @tft:	Tx FIFO Threshold in bytes
+ * @rft:	Rx FIFO Threshold in bytes
+ * @timeout	Slave response timeout(ms)
+ * @sm:		speed mode
+ */
+struct nmk_i2c_controller {
+	unsigned long	clk_freq;
+	unsigned short	slsu;
+	unsigned char	tft;
+	unsigned char	rft;
+	int timeout;
+	enum i2c_freq_mode	sm;
+};
+
+#endif	/* __PDATA_I2C_NOMADIK_H */
diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h
new file mode 100644
index 000000000000..9abc0ca7259b
--- /dev/null
+++ b/include/linux/platform_data/ina2xx.h
@@ -0,0 +1,19 @@
+/*
+ * Driver for Texas Instruments INA219, INA226 power monitor chips
+ *
+ * Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * For further information, see the Documentation/hwmon/ina2xx file.
+ */
+
+/**
+ * struct ina2xx_platform_data - ina2xx info
+ * @shunt_uohms		shunt resistance in microohms
+ */
+struct ina2xx_platform_data {
+	long shunt_uohms;
+};
diff --git a/include/linux/platform_data/leds-lm3556.h b/include/linux/platform_data/leds-lm3556.h
new file mode 100644
index 000000000000..4b4e7d6b0527
--- /dev/null
+++ b/include/linux/platform_data/leds-lm3556.h
@@ -0,0 +1,50 @@
+/*
+ * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03)
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_LM3556_H
+#define __LINUX_LM3556_H
+
+#define LM3556_NAME "leds-lm3556"
+
+enum lm3556_pin_polarity {
+	PIN_LOW_ACTIVE = 0,
+	PIN_HIGH_ACTIVE,
+};
+
+enum lm3556_pin_enable {
+	PIN_DISABLED = 0,
+	PIN_ENABLED,
+};
+
+enum lm3556_strobe_usuage {
+	STROBE_EDGE_DETECT = 0,
+	STROBE_LEVEL_DETECT,
+};
+
+enum lm3556_indic_mode {
+	INDIC_MODE_INTERNAL = 0,
+	INDIC_MODE_EXTERNAL,
+};
+
+struct lm3556_platform_data {
+	enum lm3556_pin_enable torch_pin_en;
+	enum lm3556_pin_polarity torch_pin_polarity;
+
+	enum lm3556_strobe_usuage strobe_usuage;
+	enum lm3556_pin_enable strobe_pin_en;
+	enum lm3556_pin_polarity strobe_pin_polarity;
+
+	enum lm3556_pin_enable tx_pin_en;
+	enum lm3556_pin_polarity tx_pin_polarity;
+
+	enum lm3556_indic_mode indicator_mode;
+};
+
+#endif /* __LINUX_LM3556_H */
diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
new file mode 100644
index 000000000000..cc76f1f18f18
--- /dev/null
+++ b/include/linux/platform_data/lp855x.h
@@ -0,0 +1,125 @@
+/*
+ * LP855x Backlight Driver
+ *
+ *			Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LP855X_H
+#define _LP855X_H
+
+#define BL_CTL_SHFT	(0)
+#define BRT_MODE_SHFT	(1)
+#define BRT_MODE_MASK	(0x06)
+
+/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */
+#define ENABLE_BL	(1)
+#define DISABLE_BL	(0)
+
+#define I2C_CONFIG(id)	id ## _I2C_CONFIG
+#define PWM_CONFIG(id)	id ## _PWM_CONFIG
+
+/* DEVICE CONTROL register - LP8550 */
+#define LP8550_PWM_CONFIG	(LP8550_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8550_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
+				(LP8550_I2C_ONLY << BRT_MODE_SHFT))
+
+/* DEVICE CONTROL register - LP8551 */
+#define LP8551_PWM_CONFIG	LP8550_PWM_CONFIG
+#define LP8551_I2C_CONFIG	LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8552 */
+#define LP8552_PWM_CONFIG	LP8550_PWM_CONFIG
+#define LP8552_I2C_CONFIG	LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8553 */
+#define LP8553_PWM_CONFIG	LP8550_PWM_CONFIG
+#define LP8553_I2C_CONFIG	LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8556 */
+#define LP8556_PWM_CONFIG	(LP8556_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8556_COMB1_CONFIG	(LP8556_COMBINED1 << BRT_MODE_SHFT)
+#define LP8556_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
+				(LP8556_I2C_ONLY << BRT_MODE_SHFT))
+#define LP8556_COMB2_CONFIG	(LP8556_COMBINED2 << BRT_MODE_SHFT)
+
+enum lp855x_chip_id {
+	LP8550,
+	LP8551,
+	LP8552,
+	LP8553,
+	LP8556,
+};
+
+enum lp855x_brightness_ctrl_mode {
+	PWM_BASED = 1,
+	REGISTER_BASED,
+};
+
+enum lp8550_brighntess_source {
+	LP8550_PWM_ONLY,
+	LP8550_I2C_ONLY = 2,
+};
+
+enum lp8551_brighntess_source {
+	LP8551_PWM_ONLY = LP8550_PWM_ONLY,
+	LP8551_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8552_brighntess_source {
+	LP8552_PWM_ONLY = LP8550_PWM_ONLY,
+	LP8552_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8553_brighntess_source {
+	LP8553_PWM_ONLY = LP8550_PWM_ONLY,
+	LP8553_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8556_brightness_source {
+	LP8556_PWM_ONLY,
+	LP8556_COMBINED1,	/* pwm + i2c before the shaper block */
+	LP8556_I2C_ONLY,
+	LP8556_COMBINED2,	/* pwm + i2c after the shaper block */
+};
+
+struct lp855x_pwm_data {
+	void (*pwm_set_intensity) (int brightness, int max_brightness);
+	int (*pwm_get_intensity) (int max_brightness);
+};
+
+struct lp855x_rom_data {
+	u8 addr;
+	u8 val;
+};
+
+/**
+ * struct lp855x_platform_data
+ * @name : Backlight driver name. If it is not defined, default name is set.
+ * @mode : brightness control by pwm or lp855x register
+ * @device_control : value of DEVICE CONTROL register
+ * @initial_brightness : initial value of backlight brightness
+ * @pwm_data : platform specific pwm generation functions.
+		Only valid when mode is PWM_BASED.
+ * @load_new_rom_data :
+	0 : use default configuration data
+	1 : update values of eeprom or eprom registers on loading driver
+ * @size_program : total size of lp855x_rom_data
+ * @rom_data : list of new eeprom/eprom registers
+ */
+struct lp855x_platform_data {
+	char *name;
+	enum lp855x_brightness_ctrl_mode mode;
+	u8 device_control;
+	int initial_brightness;
+	struct lp855x_pwm_data pwm_data;
+	u8 load_new_rom_data;
+	int size_program;
+	struct lp855x_rom_data *rom_data;
+};
+
+#endif
diff --git a/include/linux/platform_data/lp8727.h b/include/linux/platform_data/lp8727.h
new file mode 100644
index 000000000000..ea98c6133d32
--- /dev/null
+++ b/include/linux/platform_data/lp8727.h
@@ -0,0 +1,65 @@
+/*
+ * LP8727 Micro/Mini USB IC with integrated charger
+ *
+ *			Copyright (C) 2011 Texas Instruments
+ *			Copyright (C) 2011 National Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LP8727_H
+#define _LP8727_H
+
+enum lp8727_eoc_level {
+	EOC_5P,
+	EOC_10P,
+	EOC_16P,
+	EOC_20P,
+	EOC_25P,
+	EOC_33P,
+	EOC_50P,
+};
+
+enum lp8727_ichg {
+	ICHG_90mA,
+	ICHG_100mA,
+	ICHG_400mA,
+	ICHG_450mA,
+	ICHG_500mA,
+	ICHG_600mA,
+	ICHG_700mA,
+	ICHG_800mA,
+	ICHG_900mA,
+	ICHG_1000mA,
+};
+
+/**
+ * struct lp8727_chg_param
+ * @eoc_level : end of charge level setting
+ * @ichg : charging current
+ */
+struct lp8727_chg_param {
+	enum lp8727_eoc_level eoc_level;
+	enum lp8727_ichg ichg;
+};
+
+/**
+ * struct lp8727_platform_data
+ * @get_batt_present : check battery status - exists or not
+ * @get_batt_level : get battery voltage (mV)
+ * @get_batt_capacity : get battery capacity (%)
+ * @get_batt_temp : get battery temperature
+ * @ac, @usb : charging parameters each charger type
+ */
+struct lp8727_platform_data {
+	u8 (*get_batt_present)(void);
+	u16 (*get_batt_level)(void);
+	u8 (*get_batt_capacity)(void);
+	u8 (*get_batt_temp)(void);
+	struct lp8727_chg_param ac;
+	struct lp8727_chg_param usb;
+};
+
+#endif
diff --git a/include/linux/platform_data/mmp_audio.h b/include/linux/platform_data/mmp_audio.h
new file mode 100644
index 000000000000..0f25d165abd6
--- /dev/null
+++ b/include/linux/platform_data/mmp_audio.h
@@ -0,0 +1,22 @@
+/*
+ *  MMP Platform AUDIO Management
+ *
+ *  Copyright (c) 2011 Marvell Semiconductors Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#ifndef MMP_AUDIO_H
+#define MMP_AUDIO_H
+
+struct mmp_audio_platdata {
+	u32 period_max_capture;
+	u32 buffer_max_capture;
+	u32 period_max_playback;
+	u32 buffer_max_playback;
+};
+
+#endif /* MMP_AUDIO_H */
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index d94804aca764..944b01dd103e 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -52,13 +52,4 @@ struct mv_usb_platform_data {
 	int	(*set_vbus)(unsigned int vbus);
 	int     (*private_init)(void __iomem *opregs, void __iomem *phyregs);
 };
-
-#ifndef CONFIG_HAVE_CLK
-/* Dummy stub for clk framework */
-#define clk_get(dev, id)       NULL
-#define clk_put(clock)         do {} while (0)
-#define clk_enable(clock)      do {} while (0)
-#define clk_disable(clock)     do {} while (0)
-#endif
-
 #endif
diff --git a/include/linux/platform_data/omap_drm.h b/include/linux/platform_data/omap_drm.h
new file mode 100644
index 000000000000..3da73bdc2031
--- /dev/null
+++ b/include/linux/platform_data/omap_drm.h
@@ -0,0 +1,52 @@
+/*
+ * DRM/KMS platform data for TI OMAP platforms
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __PLATFORM_DATA_OMAP_DRM_H__
+#define __PLATFORM_DATA_OMAP_DRM_H__
+
+/*
+ * Optional platform data to configure the default configuration of which
+ * pipes/overlays/CRTCs are used.. if this is not provided, then instead the
+ * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to
+ * one manager, with priority given to managers that are connected to
+ * detected devices.  Remaining overlays are used as video planes.  This
+ * should be a good default behavior for most cases, but yet there still
+ * might be times when you wish to do something different.
+ */
+struct omap_kms_platform_data {
+	/* overlays to use as CRTCs: */
+	int ovl_cnt;
+	const int *ovl_ids;
+
+	/* overlays to use as video planes: */
+	int pln_cnt;
+	const int *pln_ids;
+
+	int mgr_cnt;
+	const int *mgr_ids;
+
+	int dev_cnt;
+	const char **dev_names;
+};
+
+struct omap_drm_platform_data {
+	struct omap_kms_platform_data *kms_pdata;
+};
+
+#endif /* __PLATFORM_DATA_OMAP_DRM_H__ */
diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h
new file mode 100644
index 000000000000..8b79e0967f9c
--- /dev/null
+++ b/include/linux/platform_data/s3c-hsotg.h
@@ -0,0 +1,40 @@
+/* include/linux/platform_data/s3c-hsotg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __LINUX_USB_S3C_HSOTG_H
+#define __LINUX_USB_S3C_HSOTG_H
+
+enum s3c_hsotg_dmamode {
+	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
+	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
+	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+	enum s3c_hsotg_dmamode	dma;
+	unsigned int		is_osc:1;
+	int                     phy_type;
+
+	int (*phy_init)(struct platform_device *pdev, int type);
+	int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
+
+#endif /* __LINUX_USB_S3C_HSOTG_H */
diff --git a/include/linux/platform_data/spear_thermal.h b/include/linux/platform_data/spear_thermal.h
deleted file mode 100644
index 724f2e1cbbcb..000000000000
--- a/include/linux/platform_data/spear_thermal.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * SPEAr thermal driver platform data.
- *
- * Copyright (C) 2011-2012 ST Microelectronics
- * Author: Vincenzo Frascino <vincenzo.frascino@st.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef SPEAR_THERMAL_H
-#define SPEAR_THERMAL_H
-
-/* SPEAr Thermal Sensor Platform Data */
-struct spear_thermal_pdata {
-	/* flags used to enable thermal sensor */
-	unsigned int thermal_flags;
-};
-
-#endif /* SPEAR_THERMAL_H */
diff --git a/include/linux/platform_data/tegra_usb.h b/include/linux/platform_data/tegra_usb.h
index 6bca5b569acb..66c673fef408 100644
--- a/include/linux/platform_data/tegra_usb.h
+++ b/include/linux/platform_data/tegra_usb.h
@@ -26,6 +26,7 @@ struct tegra_ehci_platform_data {
 	/* power down the phy on bus suspend */
 	int power_down_on_bus_suspend;
 	void *phy_config;
+	int vbus_gpio;
 };
 
 #endif /* _TEGRA_USB_H_ */
diff --git a/include/linux/platform_data/wiznet.h b/include/linux/platform_data/wiznet.h
new file mode 100644
index 000000000000..b5d8c192d84d
--- /dev/null
+++ b/include/linux/platform_data/wiznet.h
@@ -0,0 +1,24 @@
+/*
+ * Ethernet driver for the WIZnet W5x00 chip.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef PLATFORM_DATA_WIZNET_H
+#define PLATFORM_DATA_WIZNET_H
+
+#include <linux/if_ether.h>
+
+struct wiznet_platform_data {
+	int	link_gpio;
+	u8	mac_addr[ETH_ALEN];
+};
+
+#ifndef CONFIG_WIZNET_BUS_SHIFT
+#define CONFIG_WIZNET_BUS_SHIFT 0
+#endif
+
+#define W5100_BUS_DIRECT_SIZE	(0x8000 << CONFIG_WIZNET_BUS_SHIFT)
+#define W5300_BUS_DIRECT_SIZE	(0x0400 << CONFIG_WIZNET_BUS_SHIFT)
+
+#endif /* PLATFORM_DATA_WIZNET_H */